|
| |
|
| Stanley 10817 FatMax Xtreme Retractable Snap Off Knife | Stanley 33-716 16 Foot FatMax Tape |
 The Stanley 10817 is a FatMax Xtreme Retractable Snap Off Knife. Fatmax Xtreme 25MM Snap Off Knife heavy duty metal construction. The 8-1/2" long handle for one or two handed use. It stores up to 4 snap off blades in a removable cartridge. The blades load into place when prior one is used up. The blade cartridge loads from base like a pistol magazine. There are 28 cutting points in one knife.The Stanley 10817 is a FatMax Xtreme Retractable Snap Off Knife. Fatmax Xtreme 25MM Snap Off Knife heavy duty metal construction. The 8-1/2" long handle for one or two handed use. It stores up to 4 snap off blades in a removable cartridge. The blades load into place when prior one is used up. The blade cartridge loads from base like a pistol magazine. There are 28 cutting points in one knife.
11.99
Price: 11.99
|
 The Stanley 16-Foot-by-1-1/4-Inch FatMax Tape Rule is reinforced on the first 6 with BladeArmor coating for maximum durability. A Mylar polyester film extends the life of the entire blade. 11 tape standout for extra and easy-to-read graphics. The 16 and 19.2 stud center markings simplify framing jobs. This tape rule comes with a cushion grip built into the case for a non-slip grip and impact resistance. A top forward blade lock design makes it easier to lock and unlock the blade while a heavy, heat-treated spring provides long life and smooth blade recoil. Three rivet hook grabs on side, top, or bottom for inside or outside measurements. Top forward blade lock for ease locking/unlocking. There is a strong spring for smooth retraction. Stainless steel wearplate protects case from blade cuts. Cushion grip provides comfortable, slip-resistant hold.The Stanley 16-Foot-by-1-1/4-Inch FatMax Tape Rule is reinforced on the first 6 with BladeArmor coating for maximum durability. A Mylar polyester film extends the life of the entire blade. 11 tape standout for extra and easy-to-read graphics. The 16 and 19.2 stud center markings simplify framing jobs. This tape rule comes with a cushion grip built into the case for a non-slip grip and impact resistance. A top forward blade lock design makes it easier to lock and unlock the blade while a heavy, heat-treated spring provides long life and smooth blade recoil. Three rivet hook grabs on side, top, or bottom for inside or outside measurements. Top forward blade lock for ease locking/unlocking. There is a strong spring for smooth retraction. Stainless steel wearplate protects case from blade cuts. Cushion grip provides comfortable, slip-resistant hold.
19.99
Price: 19.99
|
|
|
| Stanley 45-500 24-Inch x 16-Inch Steel Carpenters Square | Stanley 45-910 24-Inch x 16-Inch Steel Rafter Square |
 The Stanley 45500 is 24 x 16 Steel Carpenters Square. The tempered steel designed for durability. The deep graduations for easy reading on face and back. The surface is protected with clear finish that resists rust. It has a reverse reading scale. 1/8" graduations can be seen on front and back. Treated with a clear, protective finish that resists rust.The Stanley 45500 is 24 x 16 Steel Carpenters Square. The tempered steel designed for durability. The deep graduations for easy reading on face and back. The surface is protected with clear finish that resists rust. It has a reverse reading scale. 1/8" graduations can be seen on front and back. Treated with a clear, protective finish that resists rust.
3.99
Price: 3.99
|
 The Stanley 45910 is 24-Inch x 16-Inch Steel Rafter Square. The high quality hardened steel provides durability and long life. The markings include Essex board measure, octagon scale, brace scale, and rafter table. Embossed graduations and figures for easy reading. The buffed finish with a clear lacquer that resists rust.The Stanley 45910 is 24-Inch x 16-Inch Steel Rafter Square. The high quality hardened steel provides durability and long life. The markings include Essex board measure, octagon scale, brace scale, and rafter table. Embossed graduations and figures for easy reading. The buffed finish with a clear lacquer that resists rust.
6.99
Price: 6.99
|
|
|
| DeWalt DW378GR Factory Reconditioned DW378G 7-1/4 Inch High Torque Framing Saw | Foremost 108101 8' X 10' Brown/Green Reversible Tarp |
 The DeWalt DW378G Factory Reconditioned saw features a 15 Amps, 2000-Watt output, 4600 RPM motor. It weighs only 13 lbs, ensuring more work done with less fatigue. A 50 bevel provides added capacity for making aggressive bevel cuts. The ergonomic design creates better balance and increases control, while the aluminum alloy shoe withstands the most rugged of environments. The DeWalt DW378G Factory Reconditioned saw features a 15 Amps, 2000-Watt output, 4600 RPM motor. It weighs only 13 lbs, ensuring more work done with less fatigue. A 50 bevel provides added capacity for making aggressive bevel cuts. The ergonomic design creates better balance and increases control, while the aluminum alloy shoe withstands the most rugged of environments.
118.12
Price: 118.12
|
 8 X 10 Brown / Green Reversible Laminated on both sides for maximum waterproofing and durability Reinforced with rope sealed in hem for extra strength High strength rust-resistant grommets on each corner Ideal for camping, boat/machinery covers or cargo/construction covers Actual product color may vary 8 X 10 Brown / Green Reversible Laminated on both sides for maximum waterproofing and durability Reinforced with rope sealed in hem for extra strength High strength rust-resistant grommets on each corner Ideal for camping, boat/machinery covers or cargo/construction covers Actual product color may vary
5.99
Price: 5.99
|
|
|
| Foremost 110203 10' X 20' Brown/Green Reversible Tarp | Eclipse 400-047 20AMP Digital Multimeter |
 10 X 20 Brown / Green Reversible Laminated on both sides for maximum waterproofing and durability Reinforced with rope sealed in hem for extra strength High strength rust-resistant grommets on each corner Ideal for camping, boat/machinery covers or cargo/construction covers Actual product color may vary 10 X 20 Brown / Green Reversible Laminated on both sides for maximum waterproofing and durability Reinforced with rope sealed in hem for extra strength High strength rust-resistant grommets on each corner Ideal for camping, boat/machinery covers or cargo/construction covers Actual product color may vary
14.99
Price: 14.99
|
 This meter is one of a series of portable, professional measuring instruments capable of performing many functions. There are different functions and 32 ranges provided. A rotary switch is used to select functions as well as ranges. This meter is one of a series of portable, professional measuring instruments capable of performing many functions. There are different functions and 32 ranges provided. A rotary switch is used to select functions as well as ranges.
32.99
Price: 32.99
|
|
|
| Performance Tool W23871 Watt LED Pocket Flashlight | Porter-Cable C3151 3.5HP 4.5-Gallon Job Boss Oil-Free Portable Air Compressor |
 Comes in 3 Colors: Silver, Black, and BlueSuper Bright 1 Watt LED FlashlightKnurled Barrel For Extra GripRubber On/Off Push Button3AAABatteries IncludedWater ResistantComes in 3 Colors: Silver, Black, and BlueSuper Bright 1 Watt LED FlashlightKnurled Barrel For Extra GripRubber On/Off Push Button3AAABatteries IncludedWater Resistant
11.99
Price: 11.99
|
 The Porter-Cable C3151 is a 3.5 HP 4.5 Gallon Job Boss Oil-Free Portable Air Compressor. The High-flow air regulator and 2-port removable console are winning combinations for contractors. Having the ability to remove the console gives the user the opportunity to remote air regulation and gain higher air pressure closer to the job site. The full roll cage frame adds protection for the pump and motor. Include mobility kit for increased portability on the jobsite. The Porter-Cable C3151 is a 3.5 HP 4.5 Gallon Job Boss Oil-Free Portable Air Compressor. The High-flow air regulator and 2-port removable console are winning combinations for contractors. Having the ability to remove the console gives the user the opportunity to remote air regulation and gain higher air pressure closer to the job site. The full roll cage frame adds protection for the pump and motor. Include mobility kit for increased portability on the jobsite.
359.99
Price: 359.99
|
|
|
| Hobart Welders weld-It 770206 Gas Welding Brazing Rod - 1/8-Inch | Hobart Welders Weld-It 770073 Electrode Storage Can |
 Hobart Welders weld-It 770206 is a Gas Welding Brazing Rod. This is a low-temperature, self-fluxing rod for use on aluminum and magnesium and it has a melting temperature of 700 F.Hobart Welders weld-It 770206 is a Gas Welding Brazing Rod. This is a low-temperature, self-fluxing rod for use on aluminum and magnesium and it has a melting temperature of 700 F.
10.99
Price: 10.99
|
 Hobart Welders Weld-It 770073 is an Electrode Storage Can. It keeps electrodes fresh and dry with an airtight seal. It is features a convenient belt clip and internal dividers with four separate storage areas. Electrodes not included.Hobart Welders Weld-It 770073 is an Electrode Storage Can. It keeps electrodes fresh and dry with an airtight seal. It is features a convenient belt clip and internal dividers with four separate storage areas. Electrodes not included.
8.99
Price: 8.99
|
|
|
| Hobart Welders Weld-It 770191 Arc Welding Helmet Replacement Lens- Clear Polycarbonate 2Inch x 4-1/4Inch (2-Pack) | Hobart Welders Weld-It 770192 Arc Welding Helmet Replacement Lens- Clear Polycarbonate 4-1/2Inch x 5-1/4Inch (2-Pack) |
 The Hobart Welders Weld-It 770191 is clear standard size replacements lens for helmets. It offers high-quality eye protection for all types of arc welding, including the necessary protection against ultraviolet rays.The Hobart Welders Weld-It 770191 is clear standard size replacements lens for helmets. It offers high-quality eye protection for all types of arc welding, including the necessary protection against ultraviolet rays.
1.99
Price: 1.99
|
 The Hobart Welders Weld-It 770192 is clear standard size replacements lens for helmets. It offers high-quality eye protection for all types of arc welding, including the necessary protection against ultraviolet rays.The Hobart Welders Weld-It 770192 is clear standard size replacements lens for helmets. It offers high-quality eye protection for all types of arc welding, including the necessary protection against ultraviolet rays.
2.99
Price: 2.99
|
|
|
| Chicago Pneumatic CP782 1/4Inch Air Screwdriver | Chicago Pneumatic CP783 1/4Inch Air Screwdriver |
 -Cushion clutch with external clutch adjustment-Built-in quick change chuck-Convenient forward/reverse valve-Ideal for general repair and body shop work-Free Speed 1,800 rpm-Cushion clutch with external clutch adjustment-Built-in quick change chuck-Convenient forward/reverse valve-Ideal for general repair and body shop work-Free Speed 1,800 rpm
269.99
Price: 269.99
|
 -Cushion clutch with internal clutch adjustment -Compact design for easy handling -Magnetic bit holder -Ideal for general repair and body shop work -Free Speed 2,000 rpm -Cushion clutch with internal clutch adjustment -Compact design for easy handling -Magnetic bit holder -Ideal for general repair and body shop work -Free Speed 2,000 rpm
279.99
Price: 279.99
|
|
|
| Makita TD090DW Factory Recondititoned 10.8-Volt Compact Lithium-Ion Cordless Impact Driver Kit | Vise-Grip 049-25 9R 9Inch Locking Welding Clamp |
 Best power-to-weight ratio at 800 in.lbs of torque and weighing only 2.0 lbs.Makita-built motor delivers 800 in.lbs. of torque in an ultra compact sizeVariable speed (0-2,400 RPM) for a wide range of fastening applicationsUltra compact design at only 6-1/8" long and weighs only 2.0 lbs. for reduced operator fatigueMakita's proprietary hammer and anvil are made using the highest quality steel and heat hardened to last longerBuilt-in L.E.D. light illuminates the work areaErgonomic shape fits like a glove with even pressure and easy controlSoft grip handle provides increased comfort on the jobElectric brake for immediate stops and minimizes kickbackMakita 10.8V Lithium-Ion batteries provides longer run time and lower self-discharge50-Minute battery charger allows for more workBest power-to-weight ratio at 800 in.lbs of torque and weighing only 2.0 lbs.Makita-built motor delivers 800 in.lbs. of torque in an ultra compact sizeVariable speed (0-2,400 RPM) for a wide range of fastening applicationsUltra compact design at only 6-1/8" long and weighs only 2.0 lbs. for reduced operator fatigueMakita's proprietary hammer and anvil are made using the highest quality steel and heat hardened to last longerBuilt-in L.E.D. light illuminates the work areaErgonomic shape fits like a glove with even pressure and easy controlSoft grip handle provides increased comfort on the jobElectric brake for immediate stops and minimizes kickbackMakita 10.8V Lithium-Ion batteries provides longer run time and lower self-discharge50-Minute battery charger allows for more work
99.99
Price: 99.99
|
 This 9-inch Locking Welding Clamp is one of Vise-Grips Locking Specialty Tools. This locking welding clamp has U-shaped jaws for visibility and working space. It holds work in proper alignment. The adjusting screw gives exacting pressure. Simply turn the adjustment screw to change jaw opening and clamping pressure. It stays adjusted for repetitive use. The guarded release trigger helps keep work safe and fast. It will quickly release and unlock when needed. Vise-Grip is the only locking tools people ask for by name. Full lifetime warranty. Each Vise-Grip tool is warranted to be free from defects in, material and workmanship for the life of the tool, except for damage caused by abuse, misuse, or alteration. This 9-inch Locking Welding Clamp is one of Vise-Grips Locking Specialty Tools. This locking welding clamp has U-shaped jaws for visibility and working space. It holds work in proper alignment. The adjusting screw gives exacting pressure. Simply turn the adjustment screw to change jaw opening and clamping pressure. It stays adjusted for repetitive use. The guarded release trigger helps keep work safe and fast. It will quickly release and unlock when needed. Vise-Grip is the only locking tools people ask for by name. Full lifetime warranty. Each Vise-Grip tool is warranted to be free from defects in, material and workmanship for the life of the tool, except for damage caused by abuse, misuse, or alteration.
16.99
Price: 16.99
|
|
|
| Irwin� Vise-Grip� 6R 6-Inch Locking C-Clamp with Regular Tips | Irwin� Vise-Grip� 5WR Curved Jaw Locking Plier with Wire Cutter |
 6" with a jaw adjustment of up to 2", and a throat depth of 1-1/2" Adjusts to the correct opening, easily adjusted to various sizes Locks with the squeeze of one hand 6" with a jaw adjustment of up to 2", and a throat depth of 1-1/2" Adjusts to the correct opening, easily adjusted to various sizes Locks with the squeeze of one hand
11.99
Price: 11.99
|
 Convenient wire cutter, involute jaw curveAdjusting screw gives exacting pressure, jaw adjustment; 0 - 1-1/4Guarded release helps keep work safe and fastConvenient wire cutter, involute jaw curveAdjusting screw gives exacting pressure, jaw adjustment; 0 - 1-1/4Guarded release helps keep work safe and fast
7.99
Price: 7.99
|
|
|
| Irwin� Vise-Grip� 6LN 6Inch Long Nose Locking Plier with Wire Cutter | Irwin 2078110 Vise Grip 10-Inch GrooveLock Pliers |
 6 with a jaw adjustment up to 2-1/4Curved jaws, wire cutterLocks on instantly and releases quickly6 with a jaw adjustment up to 2-1/4Curved jaws, wire cutterLocks on instantly and releases quickly
8.99
Price: 8.99
|
 The Irwin 2078110 is a Vise Grip 10 GrooveLock Plier. The Irwin 2078110 has an all-purpose jaw that grips onto flat, round, hex and square work pieces and provided tremendous bite. The GrooveLock Pliers also have a press-n-slide button that quickly adjusts into place and is 50% faster that the leading competitor. The multi-groove ratcheting system allows for precise positioning and provides more groove positions than standard groove joint pliers.The Irwin 2078110 is a Vise Grip 10 GrooveLock Plier. The Irwin 2078110 has an all-purpose jaw that grips onto flat, round, hex and square work pieces and provided tremendous bite. The GrooveLock Pliers also have a press-n-slide button that quickly adjusts into place and is 50% faster that the leading competitor. The multi-groove ratcheting system allows for precise positioning and provides more groove positions than standard groove joint pliers.
16.99
Price: 16.99
|
|
|
| Jet 414483 Vert Bandsaw w/ Blade Welder VBS-1408, 8Inchx14Inch Capacity, 1 HP, 1 Ph, 115/230V | Jet 321810 13Inch Geared Head Engine Lathe GH-1340W-1, 13Inch Swing 40Inch Centers, 3HP, 1Ph, 230V |
 Specifically designed for shop or production use which includes the cutting of ferrous materials. The variable speeds provide proper adjustments for high efficiency cutting. The easy to read blade tension indicator and multi-tilting worktable make for easy adjustments in cutting. The heavy-duty, enclosed steel frame reduces vibration.Specifically designed for shop or production use which includes the cutting of ferrous materials. The variable speeds provide proper adjustments for high efficiency cutting. The easy to read blade tension indicator and multi-tilting worktable make for easy adjustments in cutting. The heavy-duty, enclosed steel frame reduces vibration.
3499.00
Price: 3499.00
|
 Uniquely designed exclusively by JETHardened and ground gears are featured in the headstock and gearboxDl-4 spindle is precision ground for accuracy and supported by high-quality tapered roller bearingsHeadstock is constantly oiled during operationSplined, not keyed, shafts are utilized in the headstockGearbox gives large threading and feed capabilities with no gear changesV-way bed design is induction hardened and groundGap bed section provided for larger diameter workIndependent leadscrew and feed rodSpindle actuation control is apron mountedInch-metric dials are standardCompound and cross slide have backlash eliminationAdjustable gibs are incorporated in the carriage and slidewaysTailstock may be offset for turning tapers and includes an inch-metric graduated quillTolerance test certificate includedUniquely designed exclusively by JETHardened and ground gears are featured in the headstock and gearboxDl-4 spindle is precision ground for accuracy and supported by high-quality tapered roller bearingsHeadstock is constantly oiled during operationSplined, not keyed, shafts are utilized in the headstockGearbox gives large threading and feed capabilities with no gear changesV-way bed design is induction hardened and groundGap bed section provided for larger diameter workIndependent leadscrew and feed rodSpindle actuation control is apron mountedInch-metric dials are standardCompound and cross slide have backlash eliminationAdjustable gibs are incorporated in the carriage and slidewaysTailstock may be offset for turning tapers and includes an inch-metric graduated quillTolerance test certificate included
6699.00
Price: 6699.00
|
|
|
| Jet 321820 GH-1340W-3 Geared Head Engine Lathe for 13Inch Swing 40Inch Centers, 3 HP, 3Ph, 230/460V | Jet 321910 GH-1440ZX Engine Lathe for 14Inch Swing 40Inch Centers, D1-8 Camlock Spindle, 7-1/2 HP, 3Ph, 230/460V |
 The Jet 321820 13 geared head engine lathe includes hardened and ground gears in the headstock and gearbox. The headstock is constantly oiled during operation and includes splined, not keyed shafts. The gearbox gives large threading and feed capabilities with no gear changes. The D1-4 spindle is precision ground for accuracy and supported by high-quality tapered roller bearings. The spindle actuation control with inch-metric dials are apron mounted. The V-way bed design is induction hardened, and the gap bed section is provided for larger diameter work. The compound and cross slide have backlash elimination and adjustable gibs are incorporated in the carriage and slideways. The tailstock may be offset for turning tapers and includes an inch-metric graduated quill.The Jet 321820 13 geared head engine lathe includes hardened and ground gears in the headstock and gearbox. The headstock is constantly oiled during operation and includes splined, not keyed shafts. The gearbox gives large threading and feed capabilities with no gear changes. The D1-4 spindle is precision ground for accuracy and supported by high-quality tapered roller bearings. The spindle actuation control with inch-metric dials are apron mounted. The V-way bed design is induction hardened, and the gap bed section is provided for larger diameter work. The compound and cross slide have backlash elimination and adjustable gibs are incorporated in the carriage and slideways. The tailstock may be offset for turning tapers and includes an inch-metric graduated quill.
6699.00
Price: 6699.00
|
 The Jet 321910 GH-1440ZX is a engine lathe. The 3-1/8 spindle bore is supported by two tapered and one ball bearing, while the headstock gears are hardened, ground, shaved and composed of chrome molybdenum. The universal gearbox allows inch, metric, diametral, and module pitch threads with no change of gears required. The carriage features one-shot lubrication, Turcite-B on bed sliding surfaces, and five position automatic carriage stops to increase productivity. The T-slotted compound slide features a four-way tool post. A removable gap allows up to 23-5/8 diameter work. The high quality ANSI Class 50 wear-resistant cast iron bed ways are hardened and ground, while the one-piece cast iron base absorbs vibration allowing for heavier cuts.The Jet 321910 GH-1440ZX is a engine lathe. The 3-1/8 spindle bore is supported by two tapered and one ball bearing, while the headstock gears are hardened, ground, shaved and composed of chrome molybdenum. The universal gearbox allows inch, metric, diametral, and module pitch threads with no change of gears required. The carriage features one-shot lubrication, Turcite-B on bed sliding surfaces, and five position automatic carriage stops to increase productivity. The T-slotted compound slide features a four-way tool post. A removable gap allows up to 23-5/8 diameter work. The high quality ANSI Class 50 wear-resistant cast iron bed ways are hardened and ground, while the one-piece cast iron base absorbs vibration allowing for heavier cuts.
11499.00
Price: 11499.00
|
|
|
| Jet 354203 Var Sp 20Inch Drill Press JDP-20VS-3/230, 1-1/2Inch Drilling Capacity, 2 HP, 3 Ph, 230V Only | Jet 354201 Var Sp 20Inch Drill Press JDP-20VS-1/230, 1-1/2Inch Drilling Capacity, 1-1/2 HP, 1 Ph, 115/230V, Prewired 230V |
 This 20 variable speed drill press has a UL listed motor. There are variable spindle speeds that are easily changed by means of a front-mounted dial. The conveniently located operating controls make this machine very easy to use. The large production table will let you handle large workpieces, and there is a quick release clamp on table. Also standard is an easy to read internal depth gauge.This 20 variable speed drill press has a UL listed motor. There are variable spindle speeds that are easily changed by means of a front-mounted dial. The conveniently located operating controls make this machine very easy to use. The large production table will let you handle large workpieces, and there is a quick release clamp on table. Also standard is an easy to read internal depth gauge.
2899.00
Price: 2899.00
|
This 20 variable speed drill press has a UL listed motor. There are variable spindle speeds that are easily changed by means of a front-mounted dial. The conveniently located operating controls make this machine very easy to use. The large production table will let you handle large workpieces, and there is a quick release clamp on table. Also standard is an easy to read internal depth gauge.This 20 variable speed drill press has a UL listed motor. There are variable spindle speeds that are easily changed by means of a front-mounted dial. The conveniently located operating controls make this machine very easy to use. The large production table will let you handle large workpieces, and there is a quick release clamp on table. Also standard is an easy to read internal depth gauge.
2199.00
Price: 2199.00
|
|
|
| Chicago Pneumatic CP7750 Turbo 2.0 1/2-Inch Air Impact Wrench, 6200 RPM, 1450 BPM | Chicago Pneumatic CP7250 6-Inch Random Orbit Sander, 12000 RPM |
 -With 31% less air consumption-With innovative, patented, new motor technology, the Turbo 2.0 accelerates faster with the most torque of any 1/2 impact-4 position power regulator with 2 settings in forward and 2 in reverse-With 31% less air consumption-With innovative, patented, new motor technology, the Turbo 2.0 accelerates faster with the most torque of any 1/2 impact-4 position power regulator with 2 settings in forward and 2 in reverse
259.99
Price: 259.99
|
 The Chicago Pneumatic CP7250 is a 6 Random Orbit Sander. It has a 5 mm orbit for standard finishing applications. The sander is easy to handle, compact and lightweight and provides the best power to weight ratio in its class. The 0.3 HP oil free motor delivers the power needed to get the job done. The 6 orbit sander has a Triple balance design which provides balance with low vibration for superior control. It also has an adjustable speed regulator with safety shut off for maximum control. It also has an adjustable speed regulator with safety shut off for maximum control.The Chicago Pneumatic CP7250 is a 6 Random Orbit Sander. It has a 5 mm orbit for standard finishing applications. The sander is easy to handle, compact and lightweight and provides the best power to weight ratio in its class. The 0.3 HP oil free motor delivers the power needed to get the job done. The 6 orbit sander has a Triple balance design which provides balance with low vibration for superior control. It also has an adjustable speed regulator with safety shut off for maximum control. It also has an adjustable speed regulator with safety shut off for maximum control.
189.99
Price: 189.99
|
|
|
| Chicago Pneumatic 7300R 1/4Inch Reversing Mini Drill | Chicago Pneumatic CP854 4Inch Heavy-Duty Angle Grinder, 6 CFM, 12000 RPM |
 -Chicago Pneumatic 7300R 1/4 Reversing Mini Drill-General purpose, reversible drill. 2,700 rpm-Compact and lightweight for easy handling-Plenetary gearing with brass bushings-Jacobs chuck 1/4 inch capacity-Chicago Pneumatic 7300R 1/4 Reversing Mini Drill-General purpose, reversible drill. 2,700 rpm-Compact and lightweight for easy handling-Plenetary gearing with brass bushings-Jacobs chuck 1/4 inch capacity
119.99
Price: 119.99
|
 -Powerful 0.6 HP high performance motor for fast, efficient grinding in tight quarters-Aluminum alloy housing is rugged yet lightweight for maximum operator comfort-Spiral bevel gearing in angle head provides extended life and smooth low vibration-Powerful 0.6 HP high performance motor for fast, efficient grinding in tight quarters-Aluminum alloy housing is rugged yet lightweight for maximum operator comfort-Spiral bevel gearing in angle head provides extended life and smooth low vibration
219.99
Price: 219.99
|
|
|
| Chicago Pneumatic CP7110K Heavy Duty Air Hammer Kit | Chicago Pneumatic CP7562 90� Mini Die Angle Grinder, 6 CFM, 23000 RPM |
 -Chicago Pneumatic CP7110K Heavy Duty Air Hammer Kit-Patented Vibration Reduction Mechanism reduces vibration 45% over other models-Feather Trigger for great control to do a wide range of jobs-More Durable lasts as long as air hammers costing twice as much-Powerful with 3200 blows per minute and a 2.25 piston stroke-Chicago Pneumatic CP7110K Heavy Duty Air Hammer Kit-Patented Vibration Reduction Mechanism reduces vibration 45% over other models-Feather Trigger for great control to do a wide range of jobs-More Durable lasts as long as air hammers costing twice as much-Powerful with 3200 blows per minute and a 2.25 piston stroke
99.99
Price: 99.99
|
 -Powerful 0.25 HP high performance motor-23000 RPM maximum free speed-Rear exhaust vents air away from the work area-Powerful 0.25 HP high performance motor-23000 RPM maximum free speed-Rear exhaust vents air away from the work area
99.99
Price: 99.99
|
|
|
| Chicago Pneumatic CP710 Fine-Point Engraving Pen | Chicago Pneumatic CP715 Heavy Duty Air Hammer |
 Lightweight - For easy operationFine-Point Stylus - Allows for precise engravingCushioned Finger Grip - Increases comfort and ease-of-useLow Air Consumption - Only 1 CFMLightweight - For easy operationFine-Point Stylus - Allows for precise engravingCushioned Finger Grip - Increases comfort and ease-of-useLow Air Consumption - Only 1 CFM
66.99
Price: 66.99
|
 -Chicago Pneumatic CP715 Heavy Duty Air Hammer-Longer piston strokes for more force per blow-Integral muffler minimizes exhaust sound-Ideal for bolt and rivet shearing, bushing driving and overall front end work-Chicago Pneumatic CP715 Heavy Duty Air Hammer-Longer piston strokes for more force per blow-Integral muffler minimizes exhaust sound-Ideal for bolt and rivet shearing, bushing driving and overall front end work
59.99
Price: 59.99
|
|
|
| Chicago Pneumatic CP722 3/8-Inch Air Impact Wrench-Butterfly, 2-1/4 CFM | Chicago Pneumatic CP749 1/2Inch Air Impact Wrench, 5.5 CFM |
 -Rocking dog clutch for smooth operation and extreme durability-Easy maneuvering with 360 air inlet swivel-Butterfly throttle for comfort and control-Packed with plenty of power for bench work, carburetors, ignitions, body panels, transmissions, oil pans and small engine repair-Rocking dog clutch for smooth operation and extreme durability-Easy maneuvering with 360 air inlet swivel-Butterfly throttle for comfort and control-Packed with plenty of power for bench work, carburetors, ignitions, body panels, transmissions, oil pans and small engine repair
159.99
Price: 159.99
|
 -Tackle tough jobs with the power and speed of this true workhorse-Patented Spring Hammer clutch provides smooth operation and extreme durability-One hand push button forward/reverse power regulator-4 positive power settings in forward and ultimate power in reverse-Compact design with comfortable contoured handle-Tackle tough jobs with the power and speed of this true workhorse-Patented Spring Hammer clutch provides smooth operation and extreme durability-One hand push button forward/reverse power regulator-4 positive power settings in forward and ultimate power in reverse-Compact design with comfortable contoured handle
179.99
Price: 179.99
|
|
|
| Chicago Pneumatic CP749-2 1/2Inch Super-Duty Extended Anvil Air Impact Wrench, 5.5 CFM | Chicago Pneumatic CP7201P Mini Polisher Kit, 2500 RPM |
 -2 extended anvil for tire work-Patented Spring Hammer clutch provides smooth operation and extreme durability-One hand push button forward/reverse power regulator-4 positive power settings in forward and ultimate power in reverse-Compact design with comfortable contoured handle-2 extended anvil for tire work-Patented Spring Hammer clutch provides smooth operation and extreme durability-One hand push button forward/reverse power regulator-4 positive power settings in forward and ultimate power in reverse-Compact design with comfortable contoured handle
179.99
Price: 179.99
|
 The Chicago Pneumatic CP7201P is a Mini Polisher Kit. The tool is compact and lightweight which helps for easy access in tight areas. It has a rubber molded palm grip for added comfort. The polisher has an adjustable power regulator, its two finger throttle makes it easier to control and ensures a reduced amount of fatigue also has a silenced handle exhaust that directs air away from work area.The Chicago Pneumatic CP7201P is a Mini Polisher Kit. The tool is compact and lightweight which helps for easy access in tight areas. It has a rubber molded palm grip for added comfort. The polisher has an adjustable power regulator, its two finger throttle makes it easier to control and ensures a reduced amount of fatigue also has a silenced handle exhaust that directs air away from work area.
119.99
Price: 119.99
|
|
|
| Chicago Pneumatic CP860 Heavy-Duty Die Grinder, 5.25 CFM, 24000 RPM | Makita BL1013 10.8-Volt Lithium-ion Battery |
 -Rugged, energy efficient 1/2 HP motor-Adjustable power regulator for precise control-Lock off throttle to prevent accidental start ups-Square handle design for positive grip-Complete with 1/4 and 6 mm collet-Rugged, energy efficient 1/2 HP motor-Adjustable power regulator for precise control-Lock off throttle to prevent accidental start ups-Square handle design for positive grip-Complete with 1/4 and 6 mm collet
109.99
Price: 109.99
|
 The Makita BL1013 is a 10.8-Volt Lithium-ion Battery. This powerful yet compact lithium ion battery works with any Makita 10.8-Volt cordless tool including the LCT203W.The Makita BL1013 is a 10.8-Volt Lithium-ion Battery. This powerful yet compact lithium ion battery works with any Makita 10.8-Volt cordless tool including the LCT203W.
57.99
Price: 57.99
|
|
|
| Steel City 35820 Right Tilt Zero Clearance Insert for 10 Inch Deluxe Cabinet Table Saw | Bosch HS1814 3/4 inch Round Hex Shank, 18 inch Bull Point Chisel |
 The Steel City 35820 helps eliminate chip-out in your work piece and keeps small cut-off pieces from getting wedged between blade and insert for safer cutting.The Steel City 35820 helps eliminate chip-out in your work piece and keeps small cut-off pieces from getting wedged between blade and insert for safer cutting.
26.99
Price: 26.99
|
 One 3/4 inch Round Hex Shank18 inch Bull Point ChiselOne 3/4 inch Round Hex Shank18 inch Bull Point Chisel
13.99
Price: 13.99
|
|
|
| Bosch HC2042 1/4 inch x 8 inch SDS-Plus Shank Bit - Carbide Tipped | DeWalt DW3753H 4-Inch 6 TPI T-Shank Clean Cut Wood Cutting Jig Saw Blade |
 The Bosch HC2041 1/4 inch x 8 inch SDS-Plus Shank Bit is carbide tipped bit. Bosch SDS-plus rotary hammer bits feature a patent-pending 4-flute design which provides fast dust removal. The carbide-tipped drill bit heads are harder, tougher and more resistant to extreme loads.The Bosch HC2041 1/4 inch x 8 inch SDS-Plus Shank Bit is carbide tipped bit. Bosch SDS-plus rotary hammer bits feature a patent-pending 4-flute design which provides fast dust removal. The carbide-tipped drill bit heads are harder, tougher and more resistant to extreme loads.
4.99
Price: 4.99
|
 The DeWalt DW3753H is a 4 6 TPI T-Shank Clean Cut Wood Cutting Jig Saw Blades. The blades are ideal for use on fine woodworking. The blade size makes them ideal for making precise, intricate cuts and with its reinforced tooth design made from tough carbon steel, the blade will last longer than standard blades. The built-in side chip path helps to quickly remove debris and clear the kerf for cleaner and smoother cuts.The DeWalt DW3753H is a 4 6 TPI T-Shank Clean Cut Wood Cutting Jig Saw Blades. The blades are ideal for use on fine woodworking. The blade size makes them ideal for making precise, intricate cuts and with its reinforced tooth design made from tough carbon steel, the blade will last longer than standard blades. The built-in side chip path helps to quickly remove debris and clear the kerf for cleaner and smoother cuts.
1.19
Price: 1.19
|
|
|
| DeWalt DW2523 23-Pc Rapid Load Set | DeWalt DW5580 Heavy-Duty 5/8 inch Diamond Drill Bit |
 The DeWalt DW2523 is a 23-Pc Rapid Load Set. The rapid load holder fits all brands of corded/cordless 3/8 or 1/2 drills. Quick & easy accessory changes allow users to finish jobs faster. The hex shank locking system prevents bits from slipping.The DeWalt DW2523 is a 23-Pc Rapid Load Set. The rapid load holder fits all brands of corded/cordless 3/8 or 1/2 drills. Quick & easy accessory changes allow users to finish jobs faster. The hex shank locking system prevents bits from slipping.
14.99
Price: 14.99
|
 Diamond welded tip for greater life and durabilityReverse spiral thread delivers continuous water feed for longer life and increased speedCore ejection slot removes plug for repetitious holes Diamond welded tip for greater life and durabilityReverse spiral thread delivers continuous water feed for longer life and increased speedCore ejection slot removes plug for repetitious holes
22.79
Price: 22.79
|
|
|
| DeWalt DW2053CS 16-Piece Drive Guide Set 10 Unit Clipstrip | DeWalt DWS5023 Tool 102-Inch TrackSaw Track |
 Self-retracting guide sleeve protects fingers and holds screws in place while eliminating wobbling and slippingSelf-retracting guide sleeve protects fingers and holds screws in place while eliminating wobbling and slipping
4.99
Price: 4.99
|
 Zero-Clearance Cutting SystemDelivers precise, straight, splinter-free cutsTrackSaw Dual Edged TracksWork in both directionsReplaceable Zero-Clearance Anti-Splinter Edgesprovide splinter free cutsAnti-Twist GeometryFor superior stabilityReplaceable Friction StripsOn bottom of track, grip material while cuttingReplaceable Glide StripsOn top of track, allow TrackSaw to glide easily and smoothlyZero-Clearance Cutting SystemDelivers precise, straight, splinter-free cutsTrackSaw Dual Edged TracksWork in both directionsReplaceable Zero-Clearance Anti-Splinter Edgesprovide splinter free cutsAnti-Twist GeometryFor superior stabilityReplaceable Friction StripsOn bottom of track, grip material while cuttingReplaceable Glide StripsOn top of track, allow TrackSaw to glide easily and smoothly
229.99
Price: 229.99
|
|
|
| DeWalt DW2097CS Magnetic Drive Guide Set | DeWalt DW2169H 38 Piece Impact Driver Set |
 Self-retracting guide sleeve protects fingers and holds screws in place while eliminating wobbling and slippingSelf-retracting guide sleeve protects fingers and holds screws in place while eliminating wobbling and slipping
6.99
Price: 6.99
|
 The DeWalt DW2169H is a 38 Piece Impact Driver Set. DeWalt introduces the markets first accessory rated for Impact Drivers. These new innovative items are all rated up to 2000 in-lbs of torque.The DeWalt DW2169H is a 38 Piece Impact Driver Set. DeWalt introduces the markets first accessory rated for Impact Drivers. These new innovative items are all rated up to 2000 in-lbs of torque.
24.99
Price: 24.99
|
|
|
| DeWalt DW1627 7/8Inch Black Oxide Reduced Shank Drill Bit | DeWalt DW3753H-5 4Inch 6 TPI High Carbon Steel Jig Saw Blade - 5 Pack |
 The DeWalt DW1627 is a 7/8" black oxide reduced shank drill bit. The bit has parabolic flute design which improves chip ejection in metal and wood drilling applications. The Helix is 31 which minimizes the over aggressiveness of a true parabolic flute. 135 split point drills on contact and prevents walking. It drills through wood, plastic, metal and heat�treated steel and it cut cooler, stay sharper longer. It is perfect for heavy�duty fleet mechanics. The DeWalt DW1627 is a 7/8" black oxide reduced shank drill bit. The bit has parabolic flute design which improves chip ejection in metal and wood drilling applications. The Helix is 31 which minimizes the over aggressiveness of a true parabolic flute. 135 split point drills on contact and prevents walking. It drills through wood, plastic, metal and heat�treated steel and it cut cooler, stay sharper longer. It is perfect for heavy�duty fleet mechanics.
24.59
Price: 24.59
|
 The DeWalt DW3753H-5 is a pack of 5 4 6 TPI High Carbon Steel Jig Saw Blades. These blades have reinforced teeth design which protects the teeth from damage and stays sharper longer. Side chip path helps to quickly remove debris and clear the channel for cleaner and smoother cuts. The DeWalt DW3753H-5 is a pack of 5 4 6 TPI High Carbon Steel Jig Saw Blades. These blades have reinforced teeth design which protects the teeth from damage and stays sharper longer. Side chip path helps to quickly remove debris and clear the channel for cleaner and smoother cuts.
7.99
Price: 7.99
|
|
|
| DeWalt DW3760H 4Inch 10 TPI Fine Cut T-Shank Jig Saw Blade - 5 Pack | DeWalt DW4528 4-1/2Inch x 1/8Inch x 7/8Inch Concrete/Masonry Cutting & Grinding Wheel |
The DeWalt DW3760H is a pack of 5 4" 10 TPI Fine Cut T-Shank Jig Saw Blades. The blades are ideal for use on fine woodworking. The blade size makes them ideal for making precise, intricate cuts and with its reinforced tooth design made from tough carbon steel, the blade will last longer than standard blades. The built-in side chip path helps to quickly remove debris and clear the kerf for cleaner and smoother cuts.The DeWalt DW3760H is a pack of 5 4" 10 TPI Fine Cut T-Shank Jig Saw Blades. The blades are ideal for use on fine woodworking. The blade size makes them ideal for making precise, intricate cuts and with its reinforced tooth design made from tough carbon steel, the blade will last longer than standard blades. The built-in side chip path helps to quickly remove debris and clear the kerf for cleaner and smoother cuts.
7.99
Price: 7.99
|
 The DeWalt DW4528 is a 4-1/2 X 1/8 X 7/8 Concrete/Masonry Cutting & Grinding Wheel. It has 3 full sheets of fiberglass for durability and safety. It uses 100% virgin grain for enhanced removal and long life. The proprietary material mix ensures premium performance. The DeWalt DW4528 is a 4-1/2 X 1/8 X 7/8 Concrete/Masonry Cutting & Grinding Wheel. It has 3 full sheets of fiberglass for durability and safety. It uses 100% virgin grain for enhanced removal and long life. The proprietary material mix ensures premium performance.
1.49
Price: 1.49
|
|
|
| DeWalt DW4706 4-1/2Inch Diamond Wheel Backing Flange | DeWalt DW4910 3Inch x 5/8-11Inch Knotted Brush |
 The DeWalt DW4706 is a 4-1/2" Diamond Wheel Backing Flange. The Flange is compatible with 4-1/2" grinders with a 5/8"-11 arbor. It provides extra support and surface material. The backing flange is designed for use with the DW402, DW402G and DW818 DeWalt grinders. The DeWalt DW4706 is a 4-1/2" Diamond Wheel Backing Flange. The Flange is compatible with 4-1/2" grinders with a 5/8"-11 arbor. It provides extra support and surface material. The backing flange is designed for use with the DW402, DW402G and DW818 DeWalt grinders.
4.99
Price: 4.99
|
 The DeWalt DW4910 is a 3 x 5/8-11 Knotted Brush. The brush has highly specified wire grades which are constructed with internal holding plate to ensure consistency and safety. It is constructed for even balance which provides smooth performance. The wire is 100% inspected to meet demanding quality specifications. The DeWalt DW4910 is a 3 x 5/8-11 Knotted Brush. The brush has highly specified wire grades which are constructed with internal holding plate to ensure consistency and safety. It is constructed for even balance which provides smooth performance. The wire is 100% inspected to meet demanding quality specifications.
14.99
Price: 14.99
|
|
|
| Porter-Cable 511 Cylindrical Lock Boring Jig | Delta 32-325 Industrial Line Boring Machine, 1725 RPM, 3/4 HP |
 The Porter-Cable 511 is a Cylindrical Lock Boring Jig. The jig locates for 2-3/8-inch or 2-3/4-inch basket in seconds. It is easily adjustable for door thickness from 1-5/16 to 2-1/8 inches. All holes are drilled in one setup. It includes strike locator for accurate placement of jamb mortise. The Porter-Cable 511 is a Cylindrical Lock Boring Jig. The jig locates for 2-3/8-inch or 2-3/4-inch basket in seconds. It is easily adjustable for door thickness from 1-5/16 to 2-1/8 inches. All holes are drilled in one setup. It includes strike locator for accurate placement of jamb mortise.
199.99
Price: 199.99
|
 The Delta 32-325 Industrial 13-spindle line boring machine contains 13 boring bits which drill holes simultaneously for production work. The indexing pins help maintain proper spacing between one group of holes and the next. A large 16 inch x 29-3/4 inch table provides ample support for longer work pieces. The adjustable fence assembly and work stops allow quick set up and accurate locating of holes for proper alignment. A 3/4 HP induction motor provides plenty of power for drilling in even the hardest of laminated composite woods. An adjustable depth stop assures drilling to the correct depth each time. For increased leverage, the lowering handle telescopes from 16 inch to 23 inch and retracts when not in use. The heavy-gauge steel base has pre-drilled holes for easy mounting to a bench or stand. The Delta 32-325 Industrial 13-spindle line boring machine contains 13 boring bits which drill holes simultaneously for production work. The indexing pins help maintain proper spacing between one group of holes and the next. A large 16 inch x 29-3/4 inch table provides ample support for longer work pieces. The adjustable fence assembly and work stops allow quick set up and accurate locating of holes for proper alignment. A 3/4 HP induction motor provides plenty of power for drilling in even the hardest of laminated composite woods. An adjustable depth stop assures drilling to the correct depth each time. For increased leverage, the lowering handle telescopes from 16 inch to 23 inch and retracts when not in use. The heavy-gauge steel base has pre-drilled holes for easy mounting to a bench or stand.
1399.99
Price: 1399.99
|
|
|
| Hobart Welders 500500A Factory Reconditioned Handler 140 MIG & Flux Cored 140 Amp Welder | Big Horn 11133 Shop Vac Fitting |
 The Hobart Welders Handler 140 operates off 115 volt standard household current for maximum versatility. Comes ready to weld with or without shielding gas, no additional kit required. With an amperage output range of 25 - 140, the Hobart Welders Handler 140 easily handles a broad selection of solid mild steel or stainless, flux cored and aluminum wires.The Hobart Welders Handler 140 operates off 115 volt standard household current for maximum versatility. Comes ready to weld with or without shielding gas, no additional kit required. With an amperage output range of 25 - 140, the Hobart Welders Handler 140 easily handles a broad selection of solid mild steel or stainless, flux cored and aluminum wires.
449.99
Price: 449.99
|
 -2-1/4 inches wide on one end to work with your shop vac accessories and 2-1/2 inches on the other to be able to thread onto a 2-1/2 inch dust hose for your dust system.-2-1/4 inches wide on one end to work with your shop vac accessories and 2-1/2 inches on the other to be able to thread onto a 2-1/2 inch dust hose for your dust system.
2.99
Price: 2.99
|
|
|
| Dead On DO-801XL: Ripper� Extra Large Heavy-Duty Cut Finger Gloves | Mechanics M756-30 15/16Inch Deep 1/2Inch Dr. Standard Impact Socket |
 Features a durable Asphalt PVC palm reinforcement, full reinforcement at critical finger stress points, durable stretch nylon top of hand material, 2mm thick palm pad, 1-piece saddle construction, terry cloth brow wipe on thumb, reinforced nylon fourchettes and Velcro adjustable strap.Features a durable Asphalt PVC palm reinforcement, full reinforcement at critical finger stress points, durable stretch nylon top of hand material, 2mm thick palm pad, 1-piece saddle construction, terry cloth brow wipe on thumb, reinforced nylon fourchettes and Velcro adjustable strap.
14.99
Price: 14.99
|
 15/16 depth Drop forged steel 15/16 depth Drop forged steel
5.99
Price: 5.99
|
|
|
| Wilton 8201K 14Inch Wood/Metal Vertical Bandsaw | Performax 60-9180 180 Grit Premium Ready-To-Cut Sandpaper |
 Wilton 8201K 14 Wood/Metal Vertical Bandsaw is specially designed to effectively cut a variety of materials including wood, plastic, bakelite, composites, ferrous and non-ferrous metals. Capable of contour and straight cutting and resawing. Can cut delicate curves in both thick and thin stock. Wilton 8201K 14 Wood/Metal Vertical Bandsaw is specially designed to effectively cut a variety of materials including wood, plastic, bakelite, composites, ferrous and non-ferrous metals. Capable of contour and straight cutting and resawing. Can cut delicate curves in both thick and thin stock.
1199.99
Price: 1199.99
|
 The Performax 60-9180 is a 180 Grit Premium Ready-To-Cut Sandpaper Roll. The Bulk abrasive comes in a roll ready to be cut to fit the Performax drum sanders. The abrasive material is pre-marked and color coded and works with any Performax sander. The color which corresponds to the drum size is to be cut along the line. The abrasive roll yields 19 wraps on a 16" drum, 12 wraps on a 25" drum, 14 wraps on a 22" drum and 8 wraps on a 37" drum.The Performax 60-9180 is a 180 Grit Premium Ready-To-Cut Sandpaper Roll. The Bulk abrasive comes in a roll ready to be cut to fit the Performax drum sanders. The abrasive material is pre-marked and color coded and works with any Performax sander. The color which corresponds to the drum size is to be cut along the line. The abrasive roll yields 19 wraps on a 16" drum, 12 wraps on a 25" drum, 14 wraps on a 22" drum and 8 wraps on a 37" drum.
119.99
Price: 119.99
|
|
|
| Powermatic 2042374 Mobile Base for 54A 6Inch Jointers | Chicago Pneumatic CP734H 1/2Inch Air Impact Wrench, 3.75 CFM |
 The Powermatic 2042374 Mobile Base add new dimensions of flexibility to the existing Powermatic machines. The Equipment previously considered immovable can easily be moved by only one person. These bases consist of heavy-duty all welded steel tubular frame, and non-marking wheels that independently lock for added stability. The long base is collapsible for ease of shipment. The Powermatic 2042374 Mobile Base add new dimensions of flexibility to the existing Powermatic machines. The Equipment previously considered immovable can easily be moved by only one person. These bases consist of heavy-duty all welded steel tubular frame, and non-marking wheels that independently lock for added stability. The long base is collapsible for ease of shipment.
179.99
Price: 179.99
|
 -DYNA-PACT oil bath clutch delivers smooth operation and extended durability-One hand push button forward/reverse power regulator-4 positive power settings and full power in reverse-Handle exhaust with 360 air inlet swivel to prevent hose kinks-Power and economy for general repair, transmission work, exhaust systems and body shops-DYNA-PACT oil bath clutch delivers smooth operation and extended durability-One hand push button forward/reverse power regulator-4 positive power settings and full power in reverse-Handle exhaust with 360 air inlet swivel to prevent hose kinks-Power and economy for general repair, transmission work, exhaust systems and body shops
109.99
Price: 109.99
|
|
|
| Chicago Pneumatic CP870 6Inch Dual Action Sander, 10000 RPM, 8 CFM | Chicago Pneumatic CP875 Mini Die Angle Grinder, 5.5 CFM, 22500 RPM |
 -Rotary and orbital motion for rapid removal as well as fine finishing -Power regulator for precise control -Lock off throttle to prevent accidental start ups -Insulated grip for added comfort -Rotary and orbital motion for rapid removal as well as fine finishing -Power regulator for precise control -Lock off throttle to prevent accidental start ups -Insulated grip for added comfort
59.99
Price: 59.99
|
 -Compact, lightweight design for easy maneuverability -90 angle head allows flexibility in confined areas -Complete with 1/4 and 6 mm collet -Excellent for high speed blending, smoothing, porting and deburring in confined areas -Compact, lightweight design for easy maneuverability -90 angle head allows flexibility in confined areas -Complete with 1/4 and 6 mm collet -Excellent for high speed blending, smoothing, porting and deburring in confined areas
59.99
Price: 59.99
|
|
|
| TerraLUX TMM-2 FlexNeck Worklight Clamp | Festool 495380 36 Tooth Universal Saw Blade for the TS 75 |
 TerraLUX TMM-2 FlexNeck Worklight Clamp has Flexible mount accessory for hands-free use of any TerraLUX LED Worklight.TerraLUX TMM-2 Worklight slides firmly into clamp, flexible long neck holds any position to put light exactly where needed. TerraLUX TMM-2 has Super strong magnetic base.TerraLUX TMM-2 FlexNeck Worklight Clamp has Flexible mount accessory for hands-free use of any TerraLUX LED Worklight.TerraLUX TMM-2 Worklight slides firmly into clamp, flexible long neck holds any position to put light exactly where needed. TerraLUX TMM-2 has Super strong magnetic base.
9.99
Price: 9.99
|
 ToolKing.com is authorized to sell Festool products only to customers residing the United States and its territoriesThe Festool 495380 Universal Circular Saw Blade for TS 75 is a tungsten-carbide ATB saw blade for clean cuts in wood, construction panels and soft plastics. It has 36 Alternating Top Bevel (ATB) offset teeth. The teeth on this saw blade cut alternately to the left and right. Offset teeth are standard for all blades for wooden materials.ToolKing.com is authorized to sell Festool products only to customers residing the United States and its territoriesThe Festool 495380 Universal Circular Saw Blade for TS 75 is a tungsten-carbide ATB saw blade for clean cuts in wood, construction panels and soft plastics. It has 36 Alternating Top Bevel (ATB) offset teeth. The teeth on this saw blade cut alternately to the left and right. Offset teeth are standard for all blades for wooden materials.
71.50
Price: 71.50
|
|
|
| Bosch RotoZip RZ01-1100 Factory Reconditioned 120V RotoZip Spiral Saw, 30000 RPM, 5.0 Amps | Bosch BAT609 18-Volt Litheon� SlimPack Battery |
 Bosch RotoZip RZ01-1100 is a Factory Reconditioned 120V RotoZip Spiral Saw. It has a 30000 RPM speed and a 5.0 Amps power. The soft handle of this saw makes it very comfortable to use and causes minimum strain. Moreover, this power tool also has a quick release foot that can be adjusted to get cuts up to 1" deep. The Rotozip saw allows you fast free hand cuts on ceramic tiles, cement boards, dry walls and various other materials. This power tool also has internal structural ribs that render durability. This saws collet system includes 1/8", 5/32" and 1/4" collet and collet nut, also for use with Zip Bits and new XBITS.Bosch RotoZip RZ01-1100 is a Factory Reconditioned 120V RotoZip Spiral Saw. It has a 30000 RPM speed and a 5.0 Amps power. The soft handle of this saw makes it very comfortable to use and causes minimum strain. Moreover, this power tool also has a quick release foot that can be adjusted to get cuts up to 1" deep. The Rotozip saw allows you fast free hand cuts on ceramic tiles, cement boards, dry walls and various other materials. This power tool also has internal structural ribs that render durability. This saws collet system includes 1/8", 5/32" and 1/4" collet and collet nut, also for use with Zip Bits and new XBITS.
34.99
Price: 34.99
|
 Up to 5 times longer cycle life than competitive Lithium-Ion batteriesFor use with all Bosch 18V Litheon� toolsUse only with Litheon 18V Litheon� Charger -- BC630Up to 5 times longer cycle life than competitive Lithium-Ion batteriesFor use with all Bosch 18V Litheon� toolsUse only with Litheon 18V Litheon� Charger -- BC630
69.99
Price: 69.99
|
|
|
| Bosch BAT618 18-Volt 2.6-Ah Litheon� FatPack Battery | Bosch HC2041 1/4 inch x 6 inch SDS-Plus Shank Bit - Carbide Tipped |
 Up to 5 times longer cycle life than competitive Lithium-Ion batteriesFor use with all Bosch 18V Litheon� toolsUse only with Litheon 18V Litheon� Charger -- BC630Up to 5 times longer cycle life than competitive Lithium-Ion batteriesFor use with all Bosch 18V Litheon� toolsUse only with Litheon 18V Litheon� Charger -- BC630
89.99
Price: 89.99
|
 The Bosch HC2041 1/4 inch x 6 inch SDS-Plus Shank Bit is carbide tipped bit. Bosch SDS-plus rotary hammer bits feature a patent-pending 4-flute design which provides fast dust removal. The carbide-tipped drill bit heads are harder, tougher and more resistant to extreme loads.The Bosch HC2041 1/4 inch x 6 inch SDS-Plus Shank Bit is carbide tipped bit. Bosch SDS-plus rotary hammer bits feature a patent-pending 4-flute design which provides fast dust removal. The carbide-tipped drill bit heads are harder, tougher and more resistant to extreme loads.
3.99
Price: 3.99
|
|
|
| Bosch HC5052 1 inch x 16 inch SDS Max Shank Wild Bore Bit | DeWalt DW1170 Z 16 Piece Gold Ferrous Pilot Point Set - Up to 3/8-Inch |
 The Bosch HC5052 1 inch x 16 inch SDS Max Shank Wild Bore Bit. Bosch carbide rotary hammer bit features tip that stay sharper longer and deliver more holes within their ANSI specification than competitors bits. Also, Bosch shafts wear at a much slower rate than most others and can take more abuse because of Boschs technologically advanced conditioning process.The Bosch HC5052 1 inch x 16 inch SDS Max Shank Wild Bore Bit. Bosch carbide rotary hammer bit features tip that stay sharper longer and deliver more holes within their ANSI specification than competitors bits. Also, Bosch shafts wear at a much slower rate than most others and can take more abuse because of Boschs technologically advanced conditioning process.
42.99
Price: 42.99
|
 The DeWalt DW1170 is a 16 Piece Gold Ferrous Pilot Point Set. The DeWalt Pilot Point Drill Bit tips start on contact for clean accurate holes and reduces lock-up on breakthrough. They feature a No-Spin shank that eliminates the frustration of bits spinning in the chuck. The tapered web provides greater durability to reduce breaking and size markings are located above the shank to prevent them from wearing away.The DeWalt DW1170 is a 16 Piece Gold Ferrous Pilot Point Set. The DeWalt Pilot Point Drill Bit tips start on contact for clean accurate holes and reduces lock-up on breakthrough. They feature a No-Spin shank that eliminates the frustration of bits spinning in the chuck. The tapered web provides greater durability to reduce breaking and size markings are located above the shank to prevent them from wearing away.
14.99
Price: 14.99
|
|
|
| DeWalt D51257K 16 Gauge 1-1/4 Inch - 2-1/2-Inch Finish Nailer Kit | DeWalt DWS5030 Replacement Glide Strip For TrackSaw |
 The DeWalt D51257K is a 16 Gauge 1-1/4 Inch - 2-1/2 Inch Finish Nailer Kit. The D51257K ushers in the next generation of DEWALT finish nailers. Making use of Sealed Lube Dual Technology, allows the unit's motor to work as either an oil free or an oil lubricated unit. Tool-free features include: an adjustable belt hook, nail depth adjustment, jam clearing, and a 360 rotating exhaust cap. Uses 1-Inch to 2-1/2 Inch (25.4 mm - 65 mm) 16 gauge straight collated nails and includes carrying case, 1000 of 2-Inch finish nails, a low profile no-mar pad, a pre-installed sequential action trigger, as well a trigger lock off. The DeWalt D51257K is a 16 Gauge 1-1/4 Inch - 2-1/2 Inch Finish Nailer Kit. The D51257K ushers in the next generation of DEWALT finish nailers. Making use of Sealed Lube Dual Technology, allows the unit's motor to work as either an oil free or an oil lubricated unit. Tool-free features include: an adjustable belt hook, nail depth adjustment, jam clearing, and a 360 rotating exhaust cap. Uses 1-Inch to 2-1/2 Inch (25.4 mm - 65 mm) 16 gauge straight collated nails and includes carrying case, 1000 of 2-Inch finish nails, a low profile no-mar pad, a pre-installed sequential action trigger, as well a trigger lock off.
169.00
Price: 169.00
|
 Replacement glide stripFor use with Dewalt Corded and Cordless TrackSawsTrackSaws Sold SeparatelyReplacement glide stripFor use with Dewalt Corded and Cordless TrackSawsTrackSaws Sold Separately
14.99
Price: 14.99
|
|
|
| DeWalt D51276K 15 Gauge 1-1/4 Inch to 2-1/2 Inch Angled Finish Nailer Kit | DeWalt DW2730 8-Pc Drill and Drive Bit Kit |
 The DeWalt D51276K is a 15 Gauge 1-1/4 Inch to 2-1/2 Inch Angled Finish Nailer Kit. The D51257K ushers in the next generation of DeWalt finish nailers. Making use of Sealed Lube Dual Technology, allows the unit's motor to work as either an oil free or an oil lubricated unit. Tool-free features include: an adjustable belt hook, nail depth adjustment, jam clearing, and a 360 rotating exhaust cap. Uses 1-Inch to 2-1/2 Inch 34 collated 15 gauge nails, and includes carrying case, 1000 2-Inch finish nails, a low profile no-mar pad, a pre-installed sequential action trigger, as well a trigger lock off. The DeWalt D51276K is a 15 Gauge 1-1/4 Inch to 2-1/2 Inch Angled Finish Nailer Kit. The D51257K ushers in the next generation of DeWalt finish nailers. Making use of Sealed Lube Dual Technology, allows the unit's motor to work as either an oil free or an oil lubricated unit. Tool-free features include: an adjustable belt hook, nail depth adjustment, jam clearing, and a 360 rotating exhaust cap. Uses 1-Inch to 2-1/2 Inch 34 collated 15 gauge nails, and includes carrying case, 1000 2-Inch finish nails, a low profile no-mar pad, a pre-installed sequential action trigger, as well a trigger lock off.
189.00
Price: 189.00
|
 The DeWalt DW2730 is a 8-Pc Drill and Drive Bit Kit. The set provides quick & easy changes between drilling & driving. It has black oxide split point drill bits start on contact. The set features quick change mechanism for easy one step loading, easy push forward one handed release, contoured finger grip for easy ergonomic use. The DeWalt DW2730 is a 8-Pc Drill and Drive Bit Kit. The set provides quick & easy changes between drilling & driving. It has black oxide split point drill bits start on contact. The set features quick change mechanism for easy one step loading, easy push forward one handed release, contoured finger grip for easy ergonomic use.
24.99
Price: 24.99
|
|
|
| Grip 12673 Goodyear 50-Foot x 3/8-Inch Air Hose | Grip 23020 2 Ton Webbing Sling |
 The Grip 12673 is a Goodyear 50-Foot Air Hose. The hose is ideal for use with an air compressor. It is designed to help power all types of pneumatic tools including staple guns, brad nailers, spray guns, air ratchets and more. The rubber hose is weather, oil and solvent resistant.The Grip 12673 is a Goodyear 50-Foot Air Hose. The hose is ideal for use with an air compressor. It is designed to help power all types of pneumatic tools including staple guns, brad nailers, spray guns, air ratchets and more. The rubber hose is weather, oil and solvent resistant.
26.99
Price: 26.99
|
 Reduce the chance of damage when lifting objects with polished, soft, or painted surfaces.Heavy duty, polyester webbing will not rot or tear when useed in extreme conditions.Easy to rig and removeReduce the chance of damage when lifting objects with polished, soft, or painted surfaces.Heavy duty, polyester webbing will not rot or tear when useed in extreme conditions.Easy to rig and remove
9.99
Price: 9.99
|
|
|
| Grip 28744 2Inch x 27' Ratchet Tie Down Strap with Flat Hooks | Grip 30181 12 inch 4 in 1 Combination Square |
 Weather resistant nylon webbing for maximum strength Steel ratchet action lever easily tightens, locks, and releases easily with a trouble free push button quick release Durable straps will not loosen with road vibration Ideal for trucks, trailers, and all terrain vehicles, and more Flat end hooks provide a secure hold 10,000 lbs. weight capacity. 2 x 27 ft. strap. Includes 1. Weather resistant nylon webbing for maximum strength Steel ratchet action lever easily tightens, locks, and releases easily with a trouble free push button quick release Durable straps will not loosen with road vibration Ideal for trucks, trailers, and all terrain vehicles, and more Flat end hooks provide a secure hold 10,000 lbs. weight capacity. 2 x 27 ft. strap. Includes 1.
27.99
Price: 27.99
|
 The Grip 30181 is a 12 inch 4 in 1 Combination Square. It has 12 inch ruler blade with graduations down to 1/32 inch and metric down to 1 mm. It features a direct reading double protractor head.The Grip 30181 is a 12 inch 4 in 1 Combination Square. It has 12 inch ruler blade with graduations down to 1/32 inch and metric down to 1 mm. It features a direct reading double protractor head.
13.99
Price: 13.99
|
|
|
| Grip 34182 Vertical Toggle Clamp for Welding | Grip 41720 3 lb. Dead Blow Mallet |
 Professional quality Excellent welding accessory with strong holding capacity Large size Professional quality Excellent welding accessory with strong holding capacity Large size
5.99
Price: 5.99
|
 Steel shot filled head combines with cushioned face to add extra force to hammer blows without rebound Handle has a flanged end for more secure grip 3 lbs Steel shot filled head combines with cushioned face to add extra force to hammer blows without rebound Handle has a flanged end for more secure grip 3 lbs
9.99
Price: 9.99
|
|
|
| Grip 43094 10 Piece 12 Inch x 3/16 Inch Heat Shrink Tubes | Grip 52030 4-Wheel Furniture Dolly |
 The Grip 43094 is a set of 10 12-Inch x 3/16-Inch Heat Shrink Tubes.The Grip 43094 is a set of 10 12-Inch x 3/16-Inch Heat Shrink Tubes.
2.69
Price: 2.69
|
 Great for moving furnitureCarpeting on both ends for a protective surfaceSolid wood frame finished with clear varnishThree swivel casters Max. load 800 lbs. Dimensions 30L x 18W x 5.6H.Great for moving furnitureCarpeting on both ends for a protective surfaceSolid wood frame finished with clear varnishThree swivel casters Max. load 800 lbs. Dimensions 30L x 18W x 5.6H.
23.99
Price: 23.99
|
|
|
| Grip 55110 24Inch Magnetic Tool Holder Strip | Grip 60270 7-Piece 7-Inch Nylon Pry Kit |
 A great addition for any shop or tool areaKeeps tools off of the floor and right there ready to usePowerful magnets hold tools in placeComes complete with installation hardware24 longA great addition for any shop or tool areaKeeps tools off of the floor and right there ready to usePowerful magnets hold tools in placeComes complete with installation hardware24 long
6.99
Price: 6.99
|
 The Grip 60270 is a 7-Pc 7-Inch Nylon Pry Kit. It is ideal for removing trim in automobiles, or other disassembly worth without damaging delicate surfaces. The Strong high impact plastic construction provides added strength and durability.The Grip 60270 is a 7-Pc 7-Inch Nylon Pry Kit. It is ideal for removing trim in automobiles, or other disassembly worth without damaging delicate surfaces. The Strong high impact plastic construction provides added strength and durability.
6.99
Price: 6.99
|
|
|
| Grip 62285 2pc Nut & Bit Holder Set | Grip 67446 3-Pc Magnetic Bar Set |
 2pc Nut & Bit Holder Set2pc Nut & Bit Holder Set
3.99
Price: 3.99
|
 Powerful magnets hold tools and other ferrous objects in place. Keeps tools off the floor and available for use. In 8in., 12in. and 18in. sizes.Powerful magnets hold tools and other ferrous objects in place. Keeps tools off the floor and available for use. In 8in., 12in. and 18in. sizes.
19.99
Price: 19.99
|
|
|
| Grip 74042 21-Piece 3/4Inch Drive Socket Set - SAE | Milwaukee 2650-20B 18-Volt Impact Driver - Tool Only |
 Drop forged, heat treated steel, triple chrome plated for durabilityKnurled handles on ratchet and breaaker bar for a sure gripBreaker bar provided excellent strength for loosening stubborn or rusty bolts and nutsMeets or exceeds ANSI Specs. B107.16 point sockets ensure correct fit and maximum surface contact area with bolts, enabling greater torque transferIncludes 7/8, 15/16, 1, 1-1/16, 1-1/8, 1-3/16, 1-1/4, 1-5/16, 1-3/8, 1-7/16, 1-1/2, 1-5/8, 1-3/4, 1-13/16, 1-7/8, and 2 sockets; 19-1/2 reversible ratchet handle, 20 flex breaker bar, 4 and 8 extension bars, and blow molded storage caseDrop forged, heat treated steel, triple chrome plated for durabilityKnurled handles on ratchet and breaaker bar for a sure gripBreaker bar provided excellent strength for loosening stubborn or rusty bolts and nutsMeets or exceeds ANSI Specs. B107.16 point sockets ensure correct fit and maximum surface contact area with bolts, enabling greater torque transferIncludes 7/8, 15/16, 1, 1-1/16, 1-1/8, 1-3/16, 1-1/4, 1-5/16, 1-3/8, 1-7/16, 1-1/2, 1-5/8, 1-3/4, 1-13/16, 1-7/8, and 2 sockets; 19-1/2 reversible ratchet handle, 20 flex breaker bar, 4 and 8 extension bars, and blow molded storage case
62.99
Price: 62.99
|
 The Milwaukee 2650-20B is an 18-Volt Impact Driver from the new M18 line from Milwaukee. The M18 Series is a revolutionary redesign of Lithium-Ion battery technology that allows Milwaukee� tools to deliver more power, with faster speeds and longer tool run times. The new M18 series tools are lighter and more compact than traditional Milwaukee� tools, which eliminates user fatigue and improves overall work. The M18 series batteries are designed to only work with M18 Series tools in order to maximize tool and battery efficiency.The Milwaukee 2650-20B is an 18-Volt Impact Driver from the new M18 line from Milwaukee. The M18 Series is a revolutionary redesign of Lithium-Ion battery technology that allows Milwaukee� tools to deliver more power, with faster speeds and longer tool run times. The new M18 series tools are lighter and more compact than traditional Milwaukee� tools, which eliminates user fatigue and improves overall work. The M18 series batteries are designed to only work with M18 Series tools in order to maximize tool and battery efficiency.
139.99
Price: 139.99
|
|
|
| Porter Cable 343K 5-Inch Random Orbit Sander Kit w/ Dust Pick-Up | Porter-Cable DA250C 15 Gauge 2-1/2 Inch Angle Finish Nailer |
 The Porter Cable 343K 5-inch Random Orbit Sander delivers the power and durability to meet the demands of the professional shop environment with it's 3.0 Amp motor. The random orbit sander is best for getting that fine, swirl-free finish you are looking for. This sander uses 5" hook & loop sanding paper. The sander is designed with an accessible top cap which you can remove to quickly clean out and service the sander. This newly designed unit feels more comfortable in your hand and the new rubber top grip makes the unit easier to hold. With the increased importance of controlling dust in your shop this sander comes with the POREX dust canister which exceeds the durability efficiency of cloth dust bags. The sander also has dual dust ports that can accept 1- and 1-1/2-inch vacuum hoses. Includes a kit box. The Porter Cable 343K 5-inch Random Orbit Sander delivers the power and durability to meet the demands of the professional shop environment with it's 3.0 Amp motor. The random orbit sander is best for getting that fine, swirl-free finish you are looking for. This sander uses 5" hook & loop sanding paper. The sander is designed with an accessible top cap which you can remove to quickly clean out and service the sander. This newly designed unit feels more comfortable in your hand and the new rubber top grip makes the unit easier to hold. With the increased importance of controlling dust in your shop this sander comes with the POREX dust canister which exceeds the durability efficiency of cloth dust bags. The sander also has dual dust ports that can accept 1- and 1-1/2-inch vacuum hoses. Includes a kit box.
59.00
Price: 59.00
|
 The Porter-Cable DA250C is a 15 Gauge 2-1/2 Inch Angle Finish Nailer. Featuring a long life maintenance/oil-free motor that prevents oil from staining the work surface, an internal piston catch for consistent max power on every shot, and a rear exhaust that keep contaminates away from work, the DA250C is part of the newest generation of Porter Cable finish nailers. With the ability to drive 15 gauge nails from 1" to 2 1/2" in length, a tool-free depth-of-drive adjustment with detents for proper setting of nail heads, tool-free jam release mechanism for easy nail removal, a sequential style trigger with lock off switch and a removable non-marring nose tip with on tool storage, the DA250C meets all of the requirements that the discerning end user demands. The Porter-Cable DA250C is a 15 Gauge 2-1/2 Inch Angle Finish Nailer. Featuring a long life maintenance/oil-free motor that prevents oil from staining the work surface, an internal piston catch for consistent max power on every shot, and a rear exhaust that keep contaminates away from work, the DA250C is part of the newest generation of Porter Cable finish nailers. With the ability to drive 15 gauge nails from 1" to 2 1/2" in length, a tool-free depth-of-drive adjustment with detents for proper setting of nail heads, tool-free jam release mechanism for easy nail removal, a sequential style trigger with lock off switch and a removable non-marring nose tip with on tool storage, the DA250C meets all of the requirements that the discerning end user demands.
179.99
Price: 179.99
|
|
|
| Porter-Cable PIN23063 23 Gauge 5/8 inch Pin Nails (2000-Pack) | Delta 35-7670 8 inch Stacked Dado Set |
 The Porter-Cable PIN23063 is a pack of 2000, 23 Gauge 5/8 inch Pin Nails. The nails are 5/8 inches long with 23 gauge. The Porter-Cable PIN23063 is a pack of 2000, 23 Gauge 5/8 inch Pin Nails. The nails are 5/8 inches long with 23 gauge.
5.99
Price: 5.99
|
 The Delta 35-7670 is a 8 inch Stacked Dado Set. The saw blades are crafted with the latest technology and the highest standards in quality. Each blade is laser cut to be incredibly accurate will eliminating warping. The C4 micro-grain carbide teeth are precision round so that each tooth planes the wood for an exceptionally smooth finish. The laser-cut expansion slots minimize noise and edge vibration. The extra sharp cutting edges dramatically reduce splintering and tear-out. The Delta 35-7670 is a 8 inch Stacked Dado Set. The saw blades are crafted with the latest technology and the highest standards in quality. Each blade is laser cut to be incredibly accurate will eliminating warping. The C4 micro-grain carbide teeth are precision round so that each tooth planes the wood for an exceptionally smooth finish. The laser-cut expansion slots minimize noise and edge vibration. The extra sharp cutting edges dramatically reduce splintering and tear-out.
119.99
Price: 119.99
|
|
|
| Delta 28-047 105Inch x 1/4Inch 6 TPI Band Saw Blade (14Inch Band Saw w/Height Attach) | Delta 28-568 3/8Inch 3 Wheel Band Saw Blade |
 The Delta 28-047 is a band saw blade. It is a high carbon steel blade with precision machined and set teeth for accuracy. The band saw blade is tension-tested for its strength. The Delta 28-047 is a band saw blade. It is a high carbon steel blade with precision machined and set teeth for accuracy. The band saw blade is tension-tested for its strength.
13.99
Price: 13.99
|
 The Delta 28-568 is a 3/8 inch 3 Wheel Band Saw Blade. The blade is a high carbon steel replacement blade with precision machined and set teeth for accuracy. It is tension-tested for strength. The blade fits Delta 12 inch and 16 inch band saws and others requiring a 82 inch blade. The Delta 28-568 is a 3/8 inch 3 Wheel Band Saw Blade. The blade is a high carbon steel replacement blade with precision machined and set teeth for accuracy. It is tension-tested for strength. The blade fits Delta 12 inch and 16 inch band saws and others requiring a 82 inch blade.
11.99
Price: 11.99
|
|
|
| Delta 40-192 5 inch 10 TPI Plain-End Scroll Saw Blades - Pack of 6 | Titan 11030 Multi-Purpose Razor Scraper |
 The Delta 40-192 5 inch long blades have plain ends for use with Delta scroll saws and others that use blade clamps. The plain end design allows easier pass-through and smaller entry holes when making inside cuts on a work piece. Each blade is heat treated for longer life. The Delta 40-192 5 inch long blades have plain ends for use with Delta scroll saws and others that use blade clamps. The plain end design allows easier pass-through and smaller entry holes when making inside cuts on a work piece. Each blade is heat treated for longer life.
6.99
Price: 6.99
|
 Ideal for scraping labels and decals from glass, windshields, etc. Comfortable TPR handle for maximum grip Accepts all standard single edge razor blade Ideal for scraping labels and decals from glass, windshields, etc. Comfortable TPR handle for maximum grip Accepts all standard single edge razor blade
8.99
Price: 8.99
|
|
|
| Titan 12024 24-Inch Ratcheting Breaker Bar with 1/2-Inch Drive | Stabila 11990 Pocket Level |
 1/2 drive ratchet head swivels 180Heavy-duty chrome vanadium steel constructionMaximum torque 376 ft/lbs. (52 kg/m)3-way ratcheting action - right-hand thread, left-hand thread or lockChrome-plated bar and black oxide finish on head to resist corrosion1/2 drive ratchet head swivels 180Heavy-duty chrome vanadium steel constructionMaximum torque 376 ft/lbs. (52 kg/m)3-way ratcheting action - right-hand thread, left-hand thread or lockChrome-plated bar and black oxide finish on head to resist corrosion
48.99
Price: 48.99
|
 Lightweight, Compact DesignMagneticPermanently calibrated vialsAccuracy guaranteed for lifeMade in GermanyVial accuracy guaranteed for lifeDamaged body voids the warrantyLightweight, Compact DesignMagneticPermanently calibrated vialsAccuracy guaranteed for lifeMade in GermanyVial accuracy guaranteed for lifeDamaged body voids the warranty
14.99
Price: 14.99
|
|
|
| Stout X-Band Cutting Station ST-CS250 | Saw Trax 2064 2000 Series Heavy Duty Panel Saw - 10' Frame, 64Inch Crosscut |
 -The Ultimate Cutting Station converts the X-Band saw into a bench top stationary cutting sensation-Takes the work out of any cutting project-Safe, easy on the hands-Cut materials without ever picking up a tool-Easy transport to jobsite, workshop or garage-No vise required-Perfect for the do-it-your-selfer, homeowner, hobbyist, crafter, mechanic, fabricator, handyman or contractor-Ideal for home repair and home improvement-Welcome addition to the home or jobsite-The Ultimate Cutting Station converts the X-Band saw into a bench top stationary cutting sensation-Takes the work out of any cutting project-Safe, easy on the hands-Cut materials without ever picking up a tool-Easy transport to jobsite, workshop or garage-No vise required-Perfect for the do-it-your-selfer, homeowner, hobbyist, crafter, mechanic, fabricator, handyman or contractor-Ideal for home repair and home improvement-Welcome addition to the home or jobsite
74.99
Price: 74.99
|
 Never Goes Out of Square 10 wide powder-coated, welded steel frame 64 maximum cross cut Use circular saw, knife cutter, and router in the same carriage Uses standard 7 Blades Perfect for serious woodworkers and high-production facilities Add a Floating Router Plate for dadosNever Goes Out of Square 10 wide powder-coated, welded steel frame 64 maximum cross cut Use circular saw, knife cutter, and router in the same carriage Uses standard 7 Blades Perfect for serious woodworkers and high-production facilities Add a Floating Router Plate for dados
3169.99
Price: 3169.99
|
|
|
| Saw Trax FSTP96 96Inch Flip Stop | Saw Trax SPHD64 Spring Hold Down - 64Inch |
 Perfect for use with longer sheets or where cutting exact lengths repetitively. Can be placed on either the right or left side of machine. Includes specialized 96 aluminum extrusion, tape and two stops.Perfect for use with longer sheets or where cutting exact lengths repetitively. Can be placed on either the right or left side of machine. Includes specialized 96 aluminum extrusion, tape and two stops.
329.99
Price: 329.99
|
 Holds thinner materials against frame for more material support. Recommended for materials 1/4 or less. Does not have to be removed when cutting thicker materials.Holds thinner materials against frame for more material support. Recommended for materials 1/4 or less. Does not have to be removed when cutting thicker materials.
139.99
Price: 139.99
|
|
|
| OTC 7948 Silver Slapper 10 Way Slide Hammer Puller Set | Performance 7/8Inch SAE Combination Wrench |
 The OTC 7948 is a Silver Slapper 10 Way Slide Hammer Puller Set. The slide hammer puller is used to pull flange-type rear axles, stubborn oil seals and bearings and other press-fit parts. It includes slide hammer with 5 lbs hammer, rear axle pulling attachment, 3-way cross head, cone, 2-way cross block, puller hook attachment, pulling jaws(3) for internal or external pulling jobs, puller hook attachment, grip wrench adapter with single lead (wrench not included), dent puller attachment, internal/external pulling jaws (3) 6-1/2, internal puller jaws (3) 2-3/8, front hub puller assembly, forcing screw, sleeve and blow molded case.The OTC 7948 is a Silver Slapper 10 Way Slide Hammer Puller Set. The slide hammer puller is used to pull flange-type rear axles, stubborn oil seals and bearings and other press-fit parts. It includes slide hammer with 5 lbs hammer, rear axle pulling attachment, 3-way cross head, cone, 2-way cross block, puller hook attachment, pulling jaws(3) for internal or external pulling jobs, puller hook attachment, grip wrench adapter with single lead (wrench not included), dent puller attachment, internal/external pulling jaws (3) 6-1/2, internal puller jaws (3) 2-3/8, front hub puller assembly, forcing screw, sleeve and blow molded case.
259.99
Price: 259.99
|
 Heat treated Chrome Vanadium steelFull pattern, raised panel designPolished, chrome plated finishHeat treated Chrome Vanadium steelFull pattern, raised panel designPolished, chrome plated finish
3.99
Price: 3.99
|
|
|
| Performance 15/16Inch SAE Combination Wrench | Performance 1-1/8Inch SAE Combination Wrench |
Heat treated Chrome Vanadium steelFull pattern, raised panel designPolished, chrome plated finishHeat treated Chrome Vanadium steelFull pattern, raised panel designPolished, chrome plated finish
5.99
Price: 5.99
|
Heat treated Chrome Vanadium steel Full pattern, raised panel design Polished, chrome plated finish Heat treated Chrome Vanadium steel Full pattern, raised panel design Polished, chrome plated finish
7.99
Price: 7.99
|
|
|
| Performance 1-7/16Inch Open Stock Jumbo Wrench | Performance W971 8 in 1 Lighted Magnetic Screwdriver |
 Drop forged for strengh Raised panel design Drop forged for strengh Raised panel design
16.99
Price: 16.99
|
 Dual lights in handle illuminate dark, confined areas Shaft mounted bit holder 6 screwdriver bits #1 & 2 Phillips, 3/16 inch & 1/4 inch slotted, T-15 Star and R-2 Robertson Magnetic retriever extends to 24-7/8 inches Uses 2 AAA batteries (not included) Dual lights in handle illuminate dark, confined areas Shaft mounted bit holder 6 screwdriver bits #1 & 2 Phillips, 3/16 inch & 1/4 inch slotted, T-15 Star and R-2 Robertson Magnetic retriever extends to 24-7/8 inches Uses 2 AAA batteries (not included)
8.99
Price: 8.99
|
|
|
| Performance W10C 10Inch Adjustable Wrench | Performance 14-Piece 3/8� Drive Socket Set (Metric) |
 Heat treated alloy steel Polished heads Precision crafted for smooth operation Heat treated alloy steel Polished heads Precision crafted for smooth operation
7.99
Price: 7.99
|
 Heat treated alloy steel Drop forged for strength Polished chrome plated finish Sizes 7mm - 19mm Socket rail for storage Heat treated alloy steel Drop forged for strength Polished chrome plated finish Sizes 7mm - 19mm Socket rail for storage
10.99
Price: 10.99
|
|
|
| Jet 2042377 Mobile Base for 1791216K Band saw | Performax 60-6220 220 Grit Ready-to-Wrap Abrasive Strips (Pack of 4) |
 The Jet 2042377 is a Mobile Base For 1791216K Band saw. This mobile base add new dimensions of flexibility to Powermatic machines. This mobile base consist of heavy-duty all welded steel tubular frame and non-marking wheels that independently lock for added stability.The Jet 2042377 is a Mobile Base For 1791216K Band saw. This mobile base add new dimensions of flexibility to Powermatic machines. This mobile base consist of heavy-duty all welded steel tubular frame and non-marking wheels that independently lock for added stability.
159.99
Price: 159.99
|
 The Performax 60-6220 is a pack of 4, 220 Grit Ready-to-Wrap Abrasive Strips. The Ready-to-Wrap Abrasive Sandpaper strips lock in place at the right angle for quick and easy grit changes. The Ready-to-Wrap sheets in the four-pack not only roll up perfectly on the sander for sanding but are also easy to change. The abrasive strips fit the 16-32 like a glove and hence last for a longer duration than other sheets. A sharp, durable aluminum oxide gives a fast and exceptionally long-lasting cut while the high-strength resin grain bonds the system together. The Performax 60-6220 is a pack of 4, 220 Grit Ready-to-Wrap Abrasive Strips. The Ready-to-Wrap Abrasive Sandpaper strips lock in place at the right angle for quick and easy grit changes. The Ready-to-Wrap sheets in the four-pack not only roll up perfectly on the sander for sanding but are also easy to change. The abrasive strips fit the 16-32 like a glove and hence last for a longer duration than other sheets. A sharp, durable aluminum oxide gives a fast and exceptionally long-lasting cut while the high-strength resin grain bonds the system together.
29.99
Price: 29.99
|
|
|
| Chicago Pneumatic 2903062301 Oil Separator for 3HP to 7.5HP QRS Rotary Screw Compressor | Chicago Pnuematic 2903087100 Oil Separator for 10HP to 15HP QRS Rotary Screw Compressor |
The Chicago Pneumatic 2903062301 is an Oil Separator for 3HP to 7.5HP QRS Rotary Screw Compressors.The Chicago Pneumatic 2903062301 is an Oil Separator for 3HP to 7.5HP QRS Rotary Screw Compressors.
149.99
Price: 149.99
|
The Chicago Pneumatic 2903087100 is an Oil Separator for 10HP to 15HP QRS Rotary Screw Compressors.The Chicago Pneumatic 2903087100 is an Oil Separator for 10HP to 15HP QRS Rotary Screw Compressors.
149.99
Price: 149.99
|
|
|
| Chicago Pneumatic CP7268 Straight Line Sander, 3000 RPM | Chicago Pneumatic CP715K Heavy Duty Air Hammer Kit |
 When Chicago Pneumatic was developing the CP7268, they never imagined it would surpass even their expectations - but it did. The CP7268 Straight Line Sander was designed for power, performance, and durability. The twin-piston motor can generate 3,000 balanced one-inch strokes per minute, making it easy for the user to complete high-volume shaping and smooth in no time. At just over 6 lbs., it easy to handle and the ergonomic design gives you the all of the control you could ever desire. Body shop technicians will surely appreciate the ability to quickly remove material, smooth body filling, and level side panel work.When Chicago Pneumatic was developing the CP7268, they never imagined it would surpass even their expectations - but it did. The CP7268 Straight Line Sander was designed for power, performance, and durability. The twin-piston motor can generate 3,000 balanced one-inch strokes per minute, making it easy for the user to complete high-volume shaping and smooth in no time. At just over 6 lbs., it easy to handle and the ergonomic design gives you the all of the control you could ever desire. Body shop technicians will surely appreciate the ability to quickly remove material, smooth body filling, and level side panel work.
114.99
Price: 114.99
|
 -Chicago Pneumatic CP715K Heavy Duty Air Hammer Kit-Most powerful hammer in its class-Longer piston strokes for more force per blow-Integral muffler minimizes exhaust sound-Ideal for bolt and rivet shearing, bushing driving and overall front end work-Chicago Pneumatic CP715K Heavy Duty Air Hammer Kit-Most powerful hammer in its class-Longer piston strokes for more force per blow-Integral muffler minimizes exhaust sound-Ideal for bolt and rivet shearing, bushing driving and overall front end work
74.99
Price: 74.99
|
|
|
| Tenryu PP20360AB Panel Pro 8-Inch 60T Panel Saw Blade, 5/8Inch Arbor | Festool 486564 Jig Saw Blade |
 The Tenryu PP20360AB is a Panel-Pro 8 60T Panel Saw Blade. Panel Saws are often used to cut large sheets of difficult materials like MDF, melamine or particle board. These materials are laden with chemicals and adhesives which attack the carbide causing corrosion of the cutting edge. The Panel-Pro blades come equipped with our best anti-corrosive micro-grain carbide.The Tenryu PP20360AB is a Panel-Pro 8 60T Panel Saw Blade. Panel Saws are often used to cut large sheets of difficult materials like MDF, melamine or particle board. These materials are laden with chemicals and adhesives which attack the carbide causing corrosion of the cutting edge. The Panel-Pro blades come equipped with our best anti-corrosive micro-grain carbide.
104.99
Price: 104.99
|
 ToolKing.com is authorized to sell Festool products only to customers residing the United States and its territoriesToolKing.com promotional discount codes or coupons are NOT valid on Festool productsThe Festool 486564 is a Jig Saw Blade. The 2 inch blade is used for materials up to 1-3/10 inch thickness. It features cross-set teeth for fast cutting. The blade is good for use with softwood, hardwood, chipboard, coated chipboard, veneer plywood, soft plastics and acrylic plexiglas.ToolKing.com is authorized to sell Festool products only to customers residing the United States and its territoriesToolKing.com promotional discount codes or coupons are NOT valid on Festool productsThe Festool 486564 is a Jig Saw Blade. The 2 inch blade is used for materials up to 1-3/10 inch thickness. It features cross-set teeth for fast cutting. The blade is good for use with softwood, hardwood, chipboard, coated chipboard, veneer plywood, soft plastics and acrylic plexiglas.
8.50
Price: 8.50
|
|
|
| Leatherman 830683 Charge TTi MultiTool with Titanium Handles and Nylon Sheath | Fastcap PMS-16 Auto Lock ProCarpenter Tape Measure |
 The Charge AL and ALX were just too hard to beat, so we didn't even try-we simply combined them. The 830863 Charge TTi features a cutting hook, scissors, outside-accessible blades, bit drivers, crimpers and more. But we had to give the TTi its own claim to fame. That's where the comfort-sculpted titanium handles and the S30V� stainless steel clip-point knife come in. Grab a hold of one today and you'll quickly see why the Charge models are the pinnacle of our multi-tool collection.The Charge AL and ALX were just too hard to beat, so we didn't even try-we simply combined them. The 830863 Charge TTi features a cutting hook, scissors, outside-accessible blades, bit drivers, crimpers and more. But we had to give the TTi its own claim to fame. That's where the comfort-sculpted titanium handles and the S30V� stainless steel clip-point knife come in. Grab a hold of one today and you'll quickly see why the Charge models are the pinnacle of our multi-tool collection.
109.99
Price: 109.99
|
 The Fastcap PMS-16 Auto Lock is a new ProCarpenter AutoLock tape measure, which has all the great features of the original ProCarpenter, plus the new autolock and super-ergonomic design. Simply pull the blade out and it will stay in place. FastCap's ProCarpenter tape measure has a rugged compact casing with a built in pencil sharpener and a lever action belt clip. The heavy-duty blade is 1-Inch wide, 33% heavier than other tapes on the market, and has high contrast marking visibility. Simply bull the blade out and it will stay in place thanks to the new AutoLock system. To retract, just push the retract button.The Fastcap PMS-16 Auto Lock is a new ProCarpenter AutoLock tape measure, which has all the great features of the original ProCarpenter, plus the new autolock and super-ergonomic design. Simply pull the blade out and it will stay in place. FastCap's ProCarpenter tape measure has a rugged compact casing with a built in pencil sharpener and a lever action belt clip. The heavy-duty blade is 1-Inch wide, 33% heavier than other tapes on the market, and has high contrast marking visibility. Simply bull the blade out and it will stay in place thanks to the new AutoLock system. To retract, just push the retract button.
9.99
Price: 9.99
|
|
|
| DeWalt DW713R Factory Reconditioned DW713 10-Inch Single-Bevel Miter Saw | Bondhus 20399 22 Piece Ball End L-Wrench Set |
 DeWalt designed the DW713 to cut various materials including molding, sheet materials, lumber, veneer and non-ferrous metal. Vertically, the saw offers best-in-class vertical capacity to cut up to 3-1/2 Inch base molding and 4-1/2 Inch crown molding against the fence. At a horizontal capacity, the DW713 also has the ability to cut up to a 2 x 6 piece of material at zero degrees and 2 x 4 materials at 45 degrees. DeWalt offers one of the largest bevel and miter capacities in the industry with a bevel capacity of 48 degrees and a miter capacity of 50 degrees to the left and the right, increasing efficiency and accuracy on the jobsite. The DW713 is built with a 15 amp motor. A two-piece aluminum and Lexan guard design protects against side impact. Lexan allows the user to see the blade without the glare, providing a clean line of sight. For increased accuracy, DeWalt built a new, patented precise miter system, which delivers repeatable and accurate cuts. A patented machined base fence is positioned perpendicular to the base providing a solid foundation to the fence system. This feature ensures the fence remains perpendicular to the blade and promotes accurate cuts. For increased versatility, the DW713 miter saw is equipped with a cam lock miter handle that quickly locks the saw in place when performing miter cuts. Additionally, DeWalt has created a miter detent override system, enabling the user to fine-tune their miter angle without the saw slipping into the miter detents. The DW713 is also compatible with the DW7187 heavy-duty adjustable miter saw laser system that helps users see where the blade will come in contact with the material. DeWalt designed the DW713 to cut various materials including molding, sheet materials, lumber, veneer and non-ferrous metal. Vertically, the saw offers best-in-class vertical capacity to cut up to 3-1/2 Inch base molding and 4-1/2 Inch crown molding against the fence. At a horizontal capacity, the DW713 also has the ability to cut up to a 2 x 6 piece of material at zero degrees and 2 x 4 materials at 45 degrees. DeWalt offers one of the largest bevel and miter capacities in the industry with a bevel capacity of 48 degrees and a miter capacity of 50 degrees to the left and the right, increasing efficiency and accuracy on the jobsite. The DW713 is built with a 15 amp motor. A two-piece aluminum and Lexan guard design protects against side impact. Lexan allows the user to see the blade without the glare, providing a clean line of sight. For increased accuracy, DeWalt built a new, patented precise miter system, which delivers repeatable and accurate cuts. A patented machined base fence is positioned perpendicular to the base providing a solid foundation to the fence system. This feature ensures the fence remains perpendicular to the blade and promotes accurate cuts. For increased versatility, the DW713 miter saw is equipped with a cam lock miter handle that quickly locks the saw in place when performing miter cuts. Additionally, DeWalt has created a miter detent override system, enabling the user to fine-tune their miter angle without the saw slipping into the miter detents. The DW713 is also compatible with the DW7187 heavy-duty adjustable miter saw laser system that helps users see where the blade will come in contact with the material.
207.89
Price: 207.89
|
 Bondhus ball end L-wrenches permit an entry angle up to 25 to work in hard-to-reach areas. Double pack includes sizes in inches and metricBondhus ball end L-wrenches permit an entry angle up to 25 to work in hard-to-reach areas. Double pack includes sizes in inches and metric
24.99
Price: 24.99
|
|
|
| Delta 28-040 93-1/2Inch x 3/4Inch 4 TPI Band Saw Blade (14Inch Band Saw) | Amana 906 3/4Inch Bore Ogee Pattern Shaper Cutter |
 The Delta 28-040 is a band saw blade. The band saw blade is high carbon steel blade with precision machined and set teeth for accuracy. The band saw blade is tension-tested for its strength. The Delta 28-040 is a band saw blade. The band saw blade is high carbon steel blade with precision machined and set teeth for accuracy. The band saw blade is tension-tested for its strength.
13.99
Price: 13.99
|
 The Amana 906 is a 3/4 Bore Ogee Pattern Shaper Cutter. It has ogee profile and has 3/4 cutting length.The Amana 906 is a 3/4 Bore Ogee Pattern Shaper Cutter. It has ogee profile and has 3/4 cutting length.
67.99
Price: 67.99
|
|
|
| Amana 911 3/4Inch Bore Glue Joint Shaper Cutter | Amana 929 3/4Inch Bore Bullnose Shaper Cutter |
 The Amana 911 is a 3/4 Bore Glue Joint Shaper Cutter. The cutter is used for jointing. It has 1-3/16 cutting length.The Amana 911 is a 3/4 Bore Glue Joint Shaper Cutter. The cutter is used for jointing. It has 1-3/16 cutting length.
67.99
Price: 67.99
|
 The Amana 929 is a 3/4 Bore Bullnose Shaper Cutter. The cutter is used for profiling. It has 1-1/2 cutting height. The Amana 929 is a 3/4 Bore Bullnose Shaper Cutter. The cutter is used for profiling. It has 1-1/2 cutting height.
69.99
Price: 69.99
|
|
|
| Amana 950 3/4Inch Bore Corner Round / Cove Shaper Cutter | Amana 957 3/4Inch Bore 90� 'V' Groove Shaper Cutter |
 The Amana 950 is a 3/4 Bore Corner Round / Cove Shaper Cutter. The cutter is used for profiling. It has 15/16 cutting length. The Amana 950 is a 3/4 Bore Corner Round / Cove Shaper Cutter. The cutter is used for profiling. It has 15/16 cutting length.
71.99
Price: 71.99
|
 The Amana 957 is a 3/4 Bore 90 V Groove Shaper Cutter. The cutter is used for grooving. It has 15/16 cutting length. The Amana 957 is a 3/4 Bore 90 V Groove Shaper Cutter. The cutter is used for grooving. It has 15/16 cutting length.
78.99
Price: 78.99
|
|
|
| Amana 993 3/4Inch Bore Door Lip Shaper Cutter | Amana SCS-1104 Profile Pro 40 mm Steel Insert Knives |
 The Amana 993 is a 3/4 Bore Door Lip Shaper Cutter. It has ogee & cove profile and 1 cutting height.The Amana 993 is a 3/4 Bore Door Lip Shaper Cutter. It has ogee & cove profile and 1 cutting height.
79.99
Price: 79.99
|
 The Amana SCS-1104 is a set of Profile Pro 40 mm Steel Insert Knives. The set include the basic 88 mm diameter aluminum alloy cutterhead and seven pairs of interchangeable profile knives. It also included a custom hardwood storage box, hex key and color poster showing many of the different available knife profiles.The Amana SCS-1104 is a set of Profile Pro 40 mm Steel Insert Knives. The set include the basic 88 mm diameter aluminum alloy cutterhead and seven pairs of interchangeable profile knives. It also included a custom hardwood storage box, hex key and color poster showing many of the different available knife profiles.
233.99
Price: 233.99
|
|
|
| Amana SCS-1108 Profile Pro 40 mm Steel Insert Knives | Amana 45210 Plunge Router Bit - 1/4Inch Shank, 1/4Inch Cutting |
The Amana SCS-1108 is a set of Profile Pro 40 mm Steel Insert Knives. The set include the basic 88 mm diameter aluminum alloy cutterhead and seven pairs of interchangeable profile knives. It also included a custom hardwood storage box, hex key and color poster showing many of the different available knife profiles.The Amana SCS-1108 is a set of Profile Pro 40 mm Steel Insert Knives. The set include the basic 88 mm diameter aluminum alloy cutterhead and seven pairs of interchangeable profile knives. It also included a custom hardwood storage box, hex key and color poster showing many of the different available knife profiles.
233.99
Price: 233.99
|
 1/4 shank. Two flute. Cut diameter 1/4, flute length 1 Overall length 2-1/4 1/4 shank. Two flute. Cut diameter 1/4, flute length 1 Overall length 2-1/4
13.99
Price: 13.99
|
|
|
| Amana 45230 Plunge Router Bit - 1/4Inch Shank, 3/4Inch Cutting | Amana 45500 Mortising Router Bit - 1/4Inch Shank, 1/2Inch Diameter |
 1/4 shank. Two flute. Cut diameter 3/4, flute length 3/4 Overall length 2 1/4 shank. Two flute. Cut diameter 3/4, flute length 3/4 Overall length 2
18.99
Price: 18.99
|
 Features a large gullet between the two flutes 1/4 shank. Two flute. Cut diameter 1/2, flute length 3/4 Overall length 2 Features a large gullet between the two flutes 1/4 shank. Two flute. Cut diameter 1/2, flute length 3/4 Overall length 2
14.99
Price: 14.99
|
|
|
| Amana 45510 Panel Pilot Router Bit - 1/2Inch Shank, 1/2Inch Diameter, Single Flute | Amana 45806 Dovetail Router Bit - 1/2Inch Shank, 14 Degree, 1/2Inch Cutting |
 Designed for the mobile home and R.V. industries, for fast cut out work 1/2 shank. Single flute. Cut diameter 1/2, flute length 1-3/16 Overall length 3-1/2 Designed for the mobile home and R.V. industries, for fast cut out work 1/2 shank. Single flute. Cut diameter 1/2, flute length 1-3/16 Overall length 3-1/2
16.99
Price: 16.99
|
 1/2 shank. Two flute. Cut diameter 1/2, flute length 0.532, 14 degree angle Overall length 2-1/2 Application Incra, Omnijig 43750 1/2 shank. Two flute. Cut diameter 1/2, flute length 0.532, 14 degree angle Overall length 2-1/2 Application Incra, Omnijig 43750
18.99
Price: 18.99
|
|
|
| Amana 45910 Core Box Router Bit - 1/4Inch Shank, 1/4Inch Radius, Two Flute | Amana 45950 Core Box Router Bit - Ball Bearing Guide, 1/4Inch Shank, 1/4Inch Radius, Two Flute |
 1/4 shank. Two flute. Radius 1/4, cut diameter 1/2, flute length 3/8 Overall length 1-1/2 1/4 shank. Two flute. Radius 1/4, cut diameter 1/2, flute length 3/8 Overall length 1-1/2
23.99
Price: 23.99
|
 Useful for template and pattern routing where the template is on top of the workpiece. Ball bearing guide rides against the template for an exact duplication.,br> Replacement bearing #47701, replacement collar #47724 1/4 shank. Two flute. Radius 1/4, cut diameter 1/2, flute length 3/8 Overall length 2 Useful for template and pattern routing where the template is on top of the workpiece. Ball bearing guide rides against the template for an exact duplication.,br> Replacement bearing #47701, replacement collar #47724 1/4 shank. Two flute. Radius 1/4, cut diameter 1/2, flute length 3/8 Overall length 2
32.99
Price: 32.99
|
|
|
| Amana 46106 Spiral Flute Plunge Router Bit - Up-Cut, 1/2Inch Shank, 1/2Inch Diameter | Amana 47118 Flush Trim Router Bit - 1/2Inch Shank, 1/2Inch Diameter, Three Flute |
 For faster, cleaner cuts in hardwoods, plastics, Corian� and other brands of solid surface materials. Design expels chips away from the workpiece, allowing for deeper and easier mortising. Premium micro-grain carbide, increased clearance geometry and razor-sharp cutting edges with polished flutes provides a superior finish and longer tool life. 1/2 shank. Two flute. Up-cut design. Cut diameter 1/2, flute length 1-1/4 Overall length 3 For faster, cleaner cuts in hardwoods, plastics, Corian� and other brands of solid surface materials. Design expels chips away from the workpiece, allowing for deeper and easier mortising. Premium micro-grain carbide, increased clearance geometry and razor-sharp cutting edges with polished flutes provides a superior finish and longer tool life. 1/2 shank. Two flute. Up-cut design. Cut diameter 1/2, flute length 1-1/4 Overall length 3
63.99
Price: 63.99
|
 Use #47706 standard replacement bearing (.5 dia.). Use #47715 bearing (.492 dia.) after resharpening. 1/2 shank. Three flute. Cut diameter 1/2, flute length 1 Overall length 3 Use #47706 standard replacement bearing (.5 dia.). Use #47715 bearing (.492 dia.) after resharpening. 1/2 shank. Three flute. Cut diameter 1/2, flute length 1 Overall length 3
22.99
Price: 22.99
|
|
|
| Amana 47124 Flush Trim Router Bit - Ball Bearing Guide, 1/2Inch Shank, 1/2Inch Diameter | Amana 47150 No-File Laminate Trimming Router Bit - Ball Bearing Guide, 1/4Inch Shank, 1/2Inch Diameter |
 1/2 shank. Two flute. Ball bearing guide. Cut diameter 1/2, flute length 1-1/2 Overall length 3-7/8 1/2 shank. Two flute. Ball bearing guide. Cut diameter 1/2, flute length 1-1/2 Overall length 3-7/8
25.99
Price: 25.99
|
 Patented No-File� bit eliminates hand filing of laminates that normally follows trimming. These specially designed tools will flush trim the laminate and break the sharp edge all in one pass. For laminates .042-.052 thick Use #47704 replacement bearing 1/4 shank. Two flute. Cut diameter 1/2, flute length 3/8, radius 1.5mm Overall length 1-7/8 Patented No-File� bit eliminates hand filing of laminates that normally follows trimming. These specially designed tools will flush trim the laminate and break the sharp edge all in one pass. For laminates .042-.052 thick Use #47704 replacement bearing 1/4 shank. Two flute. Cut diameter 1/2, flute length 3/8, radius 1.5mm Overall length 1-7/8
25.99
Price: 25.99
|
|
|
| Amana 47162 Flush Trim V-Groove Router Bit - 1/2Inch Shank, 5/8Inch Diameter, Two Flute | Amana 47200 Bevel Trim Router Bit - Ball Bearing Guide, 1/4Inch Shank, 15 Degree Bevel |
 Double application in a single pass flush trim and V-Groove on face frame 1/2 shank. Two flute. Cut diameter 5/8, flute length 1 Overall length 3 Double application in a single pass flush trim and V-Groove on face frame 1/2 shank. Two flute. Cut diameter 5/8, flute length 1 Overall length 3
29.99
Price: 29.99
|
 Use #47706 standard replacement bearing (.5 dia.). Use #47715 bearing (.492 dia.) after resharpening. 1/4 shank. Two flute. Cut diameter 5/8, flute length 9/32, 15 degree bevel Overall length 2-1/4 Use #47706 standard replacement bearing (.5 dia.). Use #47715 bearing (.492 dia.) after resharpening. 1/4 shank. Two flute. Cut diameter 5/8, flute length 9/32, 15 degree bevel Overall length 2-1/4
18.99
Price: 18.99
|
|
|
| Amana 47202 Bevel Trim Router Bit - Ball Bearing Guide, 1/4Inch Shank, 25 Degree Bevel | Amana 48100 Amerock Hinge Router Bit - 3/8Inch Shank, 1-1/8Inch Diameter, Two Flute |
 Use #47706 standard replacement bearing (.5 dia.). Use #47715 bearing (.492 dia.) after resharpening. 1/4 shank. Two flute. Cut diameter 23/32, flute length 9/32, 25 degree bevel Overall length 2-1/4 Use #47706 standard replacement bearing (.5 dia.). Use #47715 bearing (.492 dia.) after resharpening. 1/4 shank. Two flute. Cut diameter 23/32, flute length 9/32, 25 degree bevel Overall length 2-1/4
18.99
Price: 18.99
|
 3/8 shank. Two flute. Major diameter 1-1/8, minor diameter 3/8 Radius 5/64, cutting length 21/32 Overall length 2 3/8 shank. Two flute. Major diameter 1-1/8, minor diameter 3/8 Radius 5/64, cutting length 21/32 Overall length 2
27.99
Price: 27.99
|
|
|
| Amana 49112 Cove Router Bit - 1/4Inch Shank, 1-1/8Inch Diameter, 3/8Inch Radius | Amana 49200 Roman Ogee Router Bit - Ball Bearing Guide, 1/4Inch Shank, 5/32Inch Radius |
 Use #47704 replacement bearing 1/4 shank. Two flute. Cut diameter 1-1/8, flute length 9/16, radius 3/8 Overall length 2 Use #47704 replacement bearing 1/4 shank. Two flute. Cut diameter 1-1/8, flute length 9/16, radius 3/8 Overall length 2
32.99
Price: 32.99
|
 Use #47704 replacement bearing 1/4 shank. Two flute. Cut diameter 1, flute length 5/8, radius 5/32 Overall length 2-1/8 Use #47704 replacement bearing 1/4 shank. Two flute. Cut diameter 1, flute length 5/8, radius 5/32 Overall length 2-1/8
34.99
Price: 34.99
|
|
|
| Amana 49202 Roman Ogee Router Bit - Ball Bearing Guide, 1/2Inch Shank, 5/32Inch Radius | Amana 49207 Roman Ogee Router Bit - Ball Bearing Guide, 1/2Inch Shank, 3/8Inch Radius |
 Use #47704 replacement bearing 1/2 shank. Two flute. Cut diameter 1, flute length 5/8, radius 5/32 Overall length 2-1/2 Use #47704 replacement bearing 1/2 shank. Two flute. Cut diameter 1, flute length 5/8, radius 5/32 Overall length 2-1/2
37.99
Price: 37.99
|
 Use #47706 replacement bearing 1/2 shank. Two flute. Cut diameter 2, flute length 1, radius 3/8 Overall length 3 Use #47706 replacement bearing 1/2 shank. Two flute. Cut diameter 2, flute length 1, radius 3/8 Overall length 3
46.99
Price: 46.99
|
|
|
| Amana 49302 Rabbeting Router Bit - Ball Bearing Guide, 1/2Inch Shank, 3/8Inch Rabbet | Amana 49340 Rabbeting Router Bit - Ball Bearing Guide, Multi-Rabbet, 1/4Inch Shank |
 Use #47706 standard replacement bearing 1/2 shank. Two flute. Cut diameter 1-1/4, flute length 1/2, rabbet 3/8 Overall length 2-3/8 Use #47706 standard replacement bearing 1/2 shank. Two flute. Cut diameter 1-1/4, flute length 1/2, rabbet 3/8 Overall length 2-3/8
29.99
Price: 29.99
|
 Includes four bearings for four different rabbet depths 1/4 shank. Two flute. Cut diameter 1-3/8, flute length 1/2 Includes bearings for 5/16, 3/8, 7/16, and 1/2 rabbets Overall length 2 Includes four bearings for four different rabbet depths 1/4 shank. Two flute. Cut diameter 1-3/8, flute length 1/2 Includes bearings for 5/16, 3/8, 7/16, and 1/2 rabbets Overall length 2
34.99
Price: 34.99
|
|
|
| Amana 49404 Chamfer Router Bit - Ball Bearing Guide, 1/2Inch Shank, 45 Degree | Amana 49406 Chamfer Router Bit - Ball Bearing Guide, 1/2Inch Shank, 45 Degree |
 Will completely chamfer 3/4 material Use #47706 replacement bearing 1/2 shank. Two flute. Cut diameter 2, 45 degree angle, 1-1/8 cutting length Carbide length 3/4, overall length 2-1/2 Will completely chamfer 3/4 material Use #47706 replacement bearing 1/2 shank. Two flute. Cut diameter 2, 45 degree angle, 1-1/8 cutting length Carbide length 3/4, overall length 2-1/2
84.99
Price: 84.99
|
 Will completely chamfer 1 material 18,000 max. RPM Use #47706 replacement bearing 1/2 shank. Two flute. Cut diameter 2-1/2, 45 degree angle, 1-3/8 cutting length Carbide length 1, overall length 2-7/8 Will completely chamfer 1 material 18,000 max. RPM Use #47706 replacement bearing 1/2 shank. Two flute. Cut diameter 2-1/2, 45 degree angle, 1-3/8 cutting length Carbide length 1, overall length 2-7/8
88.99
Price: 88.99
|
|
|
| Amana 49410 Chamfer Router Bit - Ball Bearing Guide, 1/2Inch Shank, 22-1/2 Degree | Amana 49496 Corner Rounding Router Bit - Ball Bearing Guide, 1/4Inch Shank, 1/8Inch Radius |
 Use #47706 replacement bearing 1/2 shank. Two flute. Cut diameter 1-1/4, 22-1/2 degree angle, 7/8 cutting length Carbide length 15/16, overall length 2-7/8 Use #47706 replacement bearing 1/2 shank. Two flute. Cut diameter 1-1/4, 22-1/2 degree angle, 7/8 cutting length Carbide length 15/16, overall length 2-7/8
31.99
Price: 31.99
|
 Use #47706 replacement bearing 1/4 shank. Two flute. Cut diameter 3/4, flute length 3/8, radius 1/8 Overall length 2 Use #47706 replacement bearing 1/4 shank. Two flute. Cut diameter 3/4, flute length 3/8, radius 1/8 Overall length 2
28.99
Price: 28.99
|
|
|
| Amana 49500 Corner Rounding Router Bit - Ball Bearing Guide, 1/4Inch Shank, 3/16Inch Radius | Amana 49506 Corner Rounding Router Bit - Ball Bearing Guide, 1/2Inch Shank, 1/4Inch Radius |
 Use #47706 replacement bearing 1/4 shank. Two flute. Cut diameter 7/8, flute length 1/2, radius 3/16 Overall length 2 Use #47706 replacement bearing 1/4 shank. Two flute. Cut diameter 7/8, flute length 1/2, radius 3/16 Overall length 2
29.99
Price: 29.99
|
 Use #47706 replacement bearing 1/2 shank. Two flute. Cut diameter 1, flute length 1/2, radius 1/4 Overall length 2-7/16 Use #47706 replacement bearing 1/2 shank. Two flute. Cut diameter 1, flute length 1/2, radius 1/4 Overall length 2-7/16
29.99
Price: 29.99
|
|
|
| |
|
|
