|
| |
|
| Delta 50-720 1-Horsepower Dust Collector, 650 CFM, 1 Phase, 120 Volts | Delta ShopMaster GR275 6Inch Variable Speed Bench Grinder with Tool-Less Change, 2000-3450 RPM, 2.0 Amps |
 The Delta 50720 is a 1 HP Dust Collector 650 CFM. The 1HP TEFC induction motor allows for long-lasting, smooth performance. A 1-micron top filter bag provides superior fine dust filtration. Clear disposable bottom bags are included for fill-and-toss convenience. A Finned aluminum motor housing keeps the motor running cool during long periods of use. The curved steel impeller produces maximum air velocity for efficient dust collection. The sturdy steel cabinet-style base with four swivel casters for moving from machine to machine or for storing out of the way. The Delta 50720 is a 1 HP Dust Collector 650 CFM. The 1HP TEFC induction motor allows for long-lasting, smooth performance. A 1-micron top filter bag provides superior fine dust filtration. Clear disposable bottom bags are included for fill-and-toss convenience. A Finned aluminum motor housing keeps the motor running cool during long periods of use. The curved steel impeller produces maximum air velocity for efficient dust collection. The sturdy steel cabinet-style base with four swivel casters for moving from machine to machine or for storing out of the way.
299.00
Price: 299.00
|
 The Delta ShopMaster GR350 8 inch bench grinder incorporates two different wheels, one for sharpening tools, chisels and bits and the other for general purpose grinding. The electronic variable speed of 2000 to 3450 RPM allows for slower speeds when using the white sharpening stone for less heat build-up, fewer sparks and a more controlled edge. When rough grinding is needed, the standard grinding wheel can be used at the maximum speed for fast removal. The on-board diamond dresser can used to extend the white sharpening wheel by truing up the edge to ensure a constant flat surface. Both tool rests are cast-iron and can articulate or be removed for larger grinding applications. The white sharpening stone tool rest has a drill bit rest milled into the surface to ensure the correct angle is kept on the tip at all times while sharpening. Both wheels are driven by a powerful 2 Amp induction motor that is mounted on a large cast-iron base for stability incorporates the safety switch and variable speed dial both up front for easy access. A 40-Watt work lamp with an independent switch has a flexible neck, which can be positioned to light either grinding wheel while maintaining a safe distance from the grinding surface. Full-sized clear safety shields have thumb screws for easy adjustment round this product out for all your grinding needs, and with the ability to slow the speed down to 2000 RPM this unit works great with the optional Delta 23-005 6 inch buffing wheel. The Delta ShopMaster GR350 8 inch bench grinder incorporates two different wheels, one for sharpening tools, chisels and bits and the other for general purpose grinding. The electronic variable speed of 2000 to 3450 RPM allows for slower speeds when using the white sharpening stone for less heat build-up, fewer sparks and a more controlled edge. When rough grinding is needed, the standard grinding wheel can be used at the maximum speed for fast removal. The on-board diamond dresser can used to extend the white sharpening wheel by truing up the edge to ensure a constant flat surface. Both tool rests are cast-iron and can articulate or be removed for larger grinding applications. The white sharpening stone tool rest has a drill bit rest milled into the surface to ensure the correct angle is kept on the tip at all times while sharpening. Both wheels are driven by a powerful 2 Amp induction motor that is mounted on a large cast-iron base for stability incorporates the safety switch and variable speed dial both up front for easy access. A 40-Watt work lamp with an independent switch has a flexible neck, which can be positioned to light either grinding wheel while maintaining a safe distance from the grinding surface. Full-sized clear safety shields have thumb screws for easy adjustment round this product out for all your grinding needs, and with the ability to slow the speed down to 2000 RPM this unit works great with the optional Delta 23-005 6 inch buffing wheel.
119.99
Price: 119.99
|
|
|
| Delta ShopMaster DP350 12-Inch Variable Speed Bench Drill Press, 500-3100 RPM, 1/3 HP | Delta 50-495 4 inch Steel Hose Clamp |
 Delta ShopMaster DP350 12 inch variable speed drill press comes with 1/3 HP induction motor for long lasting smooth performance. The variable speed range 500 RPM-3100 RPM allows a lot of drilling versatility. Pivoting motor mount maintains correct belt tension and facilitates speed changes. It has 3-spoke pilot wheel for operator convenience. Also provided with adjustable position, locking depth for accurate depth measurement and repetitive drilling. Tilting table with slots for fast clamping of work. Standard 3 jaw, 1/2 inch capacity chuck for positive gripping of various drill press cutting tools. Delta ShopMaster DP350 12 inch variable speed drill press comes with 1/3 HP induction motor for long lasting smooth performance. The variable speed range 500 RPM-3100 RPM allows a lot of drilling versatility. Pivoting motor mount maintains correct belt tension and facilitates speed changes. It has 3-spoke pilot wheel for operator convenience. Also provided with adjustable position, locking depth for accurate depth measurement and repetitive drilling. Tilting table with slots for fast clamping of work. Standard 3 jaw, 1/2 inch capacity chuck for positive gripping of various drill press cutting tools.
259.99
Price: 259.99
|
 The Delta 50-495 is a 4 inch Steel Hose Clamp for use on 4 inch hose. The Delta 50-495 is a 4 inch Steel Hose Clamp for use on 4 inch hose.
2.49
Price: 2.49
|
|
|
| Titan 11509 Razor-Sharp Edge Multi-Purpose Pry Bar | Titan 12045 3/8Inch Drive Extra-Long 11Inch Ratchet |
 -Rigid stainless steel construction-Razor sharp scraper edges-Ideal for nail and tack pulling, prying and scraping-Rigid stainless steel construction-Razor sharp scraper edges-Ideal for nail and tack pulling, prying and scraping
6.99
Price: 6.99
|
 -Extra-long offset design for hard-to-reach fasteners-36 Tooth Gear Drive ratchet mechanism for high torque applications-Quick-release feature holds sockets when you want them - lets go when you dont-Contoured cushion grip handle-Packaged on hang tab-Extra-long offset design for hard-to-reach fasteners-36 Tooth Gear Drive ratchet mechanism for high torque applications-Quick-release feature holds sockets when you want them - lets go when you dont-Contoured cushion grip handle-Packaged on hang tab
21.99
Price: 21.99
|
|
|
| Titan 15105 4 in 1 Laser Level with LED Light | Titan 16012 12Inch Bit Holder |
 Titan 15105 - 4 in 1 Laser Level with LED Light The 4 in 1 Laser Level makes easy work of leveling, aligning or straightening many home projects Use adjustable base to level tool or affix to wall with double sided tape (included) Patent Pending Meets FDA requirements Uses 2 AAA batteries (not included) Titan 15105 - 4 in 1 Laser Level with LED Light The 4 in 1 Laser Level makes easy work of leveling, aligning or straightening many home projects Use adjustable base to level tool or affix to wall with double sided tape (included) Patent Pending Meets FDA requirements Uses 2 AAA batteries (not included)
22.99
Price: 22.99
|
 -Extended driver for hard to reach areas-Auto locking drive-Locking, magnetic, low profile, quick release bit holder-Extended driver for hard to reach areas-Auto locking drive-Locking, magnetic, low profile, quick release bit holder
11.99
Price: 11.99
|
|
|
| Titan 19991 Magnetic Spray Gun Holder | Fein 6-38-06-129-02-6 MultiMaster Standard Hook & Loop Pad (Pack of 2) |
 -Provides convenient storage of gravity feed spray guns when not in use -Attaches to spray booth walls, work stations, tool boxes, or any metal surface -Vinyl Coated hooks protect spray gun from scratches -Provides convenient storage of gravity feed spray guns when not in use -Attaches to spray booth walls, work stations, tool boxes, or any metal surface -Vinyl Coated hooks protect spray gun from scratches
12.99
Price: 12.99
|
 The Fein 6-38-06-129-02-6 is a pack of 2 MultiMaster Standard Hook & Loop Pad. The MultiMaster pad is a standard Velcro and aluminum backed hook & loop pad. The hook and loop attachment system allows to switch paper between grits in the middle of a sanding job. The hook and loop face of the pad is designed for a longer life but needs to be used in a proper way.The Fein 6-38-06-129-02-6 is a pack of 2 MultiMaster Standard Hook & Loop Pad. The MultiMaster pad is a standard Velcro and aluminum backed hook & loop pad. The hook and loop attachment system allows to switch paper between grits in the middle of a sanding job. The hook and loop face of the pad is designed for a longer life but needs to be used in a proper way.
16.99
Price: 16.99
|
|
|
| Fein 6-35-02-123-04-6 1-1/8 Inch E-Cut SuperCut Blades - 5 Pack | Fein 6-34-17-090-01-8 240G H&L Sandpaper 50 Pk |
 The Fein 6-35-02-123-04-6 1-1/8 Inch E-Cut Blades are made for the Fein SuperCut tool. They are suitable for wood, plasterboard, and plastic and are used for large plunge depths. The E-Cut Blades are designed with a flush-cut so you can place the blades flat on surfaces perpendicular to your cut. You can cut almost as fast as a jigsaw or reciprocating saw without losing precision quality.The Fein 6-35-02-123-04-6 1-1/8 Inch E-Cut Blades are made for the Fein SuperCut tool. They are suitable for wood, plasterboard, and plastic and are used for large plunge depths. The E-Cut Blades are designed with a flush-cut so you can place the blades flat on surfaces perpendicular to your cut. You can cut almost as fast as a jigsaw or reciprocating saw without losing precision quality.
99.99
Price: 99.99
|
 The Fein 6-37-17-083-01-5 is a pack of 50, 80 Grit MultiMaster Hook & Loop Sandpaper. The 80 grit sandpaper has no holes and comes with a hook and loop fastener for quick-attachment. The Fein MultiMaster sandpaper is manufactured for universal use on all materials such as wood, metal, fiberglass reinforced plastics, plastic, paint, filler, welds, leather etc.The Fein 6-37-17-083-01-5 is a pack of 50, 80 Grit MultiMaster Hook & Loop Sandpaper. The 80 grit sandpaper has no holes and comes with a hook and loop fastener for quick-attachment. The Fein MultiMaster sandpaper is manufactured for universal use on all materials such as wood, metal, fiberglass reinforced plastics, plastic, paint, filler, welds, leather etc.
23.99
Price: 23.99
|
|
|
| Great Neck 42 Hand Drill | Kreg Tools 18Inch Face Clamp |
 -1/4 capacity 3-jaw sintered iron steel chuck. All-steel frame nickel-plated. Wood handle. Gear finished in red. Solid smooth running gear and single pinion. 10-1/2 overall length.-1/4 capacity 3-jaw sintered iron steel chuck. All-steel frame nickel-plated. Wood handle. Gear finished in red. Solid smooth running gear and single pinion. 10-1/2 overall length.
12.99
Price: 12.99
|
 Also ideal for joining flat stock, such as face frames, mitered picture framesEnsures a perfectly flush joint every time for tighter workpiecesKeeps workpieces aligned for precise screw drivingLarge pad keeps clamp from marring the wood for a finer outcomeProduces ultra-flush joints for less sandingAlso ideal for joining flat stock, such as face frames, mitered picture framesEnsures a perfectly flush joint every time for tighter workpiecesKeeps workpieces aligned for precise screw drivingLarge pad keeps clamp from marring the wood for a finer outcomeProduces ultra-flush joints for less sanding
32.99
Price: 32.99
|
|
|
| Big Horn 11269 4 X 1-1/2Inch Hose Adapter | Dead On DO-801L: Ripper� Large Heavy-Duty Cut Finger Gloves |
 -This very popular and versatile hose adaptor gives you the flexibility needed in a dust collection system. -This very popular and versatile hose adaptor gives you the flexibility needed in a dust collection system.
3.99
Price: 3.99
|
 Features a durable Asphalt PVC palm reinforcement, full reinforcement at critical finger stress points, durable stretch nylon top of hand material, 2mm thick palm pad, 1-piece saddle construction, terry cloth brow wipe on thumb, reinforced nylon fourchettes and Velcro adjustable strap.Features a durable Asphalt PVC palm reinforcement, full reinforcement at critical finger stress points, durable stretch nylon top of hand material, 2mm thick palm pad, 1-piece saddle construction, terry cloth brow wipe on thumb, reinforced nylon fourchettes and Velcro adjustable strap.
14.99
Price: 14.99
|
|
|
| Pull'R Holdings 06007 Gatemouth Jr. | Performance W924 3-Piece Long Shaft Screwdriver Set |
 -The Bucket Boss GateMouth Junior, 06007 is a smaller sized bag with all the big details. Rugged fabric. Wide opening for easier access.-The Bucket Boss GateMouth Junior, 06007 is a smaller sized bag with all the big details. Rugged fabric. Wide opening for easier access.
12.99
Price: 12.99
|
 22-1/2 overall length for hard to reach areas2-color plastic and rubber comfort grip handlesChrome vanadium steel shafts with magnetic tipsIncludes #2 Phillips, #3 Phillips, 1/4 Slotted22-1/2 overall length for hard to reach areas2-color plastic and rubber comfort grip handlesChrome vanadium steel shafts with magnetic tipsIncludes #2 Phillips, #3 Phillips, 1/4 Slotted
9.99
Price: 9.99
|
|
|
| Performance 6-Piece Stardriver Set with Rack | Wilmar W88986 18-Inch Wide Opening Tool Bag |
 Oversized handles fo reasy use Magnetic tips Contains T-10, T-15, T-20, T-25, T-27 & T-30 Oversized handles fo reasy use Magnetic tips Contains T-10, T-15, T-20, T-25, T-27 & T-30
9.99
Price: 9.99
|
 Wilmar W88986 is a Tool Bag with an 18 Wide Opening. The Wilmar W88986 Giant Wide Opening Tool Bag of 36-Pockets has 11 inside, 25 outside, a reinforced bottom, water repellent construction, anti-skid feet, and a heavy-duty 2-way zipper.Tools Not IncludedWilmar W88986 is a Tool Bag with an 18 Wide Opening. The Wilmar W88986 Giant Wide Opening Tool Bag of 36-Pockets has 11 inside, 25 outside, a reinforced bottom, water repellent construction, anti-skid feet, and a heavy-duty 2-way zipper.Tools Not Included
18.99
Price: 18.99
|
|
|
| Performance W89720 Non-Contact Infrared Thermometer | Jet 708028 PLH-1 Profiled Leather Honing Wheel for Model JSSG-10 Slow Speed Wet Sharpener |
 -Measures surface temps without contact -Fahrenheit or Celsius -Backlit feature -Laser pointer -Check temperature of heater vents, a/c units, engines, mufflers, tires, brakes and more -Check for leaks around windows and doors -Measures surface temps without contact -Fahrenheit or Celsius -Backlit feature -Laser pointer -Check temperature of heater vents, a/c units, engines, mufflers, tires, brakes and more -Check for leaks around windows and doors
42.99
Price: 42.99
|
 The wheel is made of leather laminations and profiled to make it possible to hone the bevels out of cannel carving tools and vee tools. Use in conjunction with a little honing paste. This Profiled Honing wheel screws onto the main shaft on the same side as the standard honing wheel so both are available for use.The wheel is made of leather laminations and profiled to make it possible to hone the bevels out of cannel carving tools and vee tools. Use in conjunction with a little honing paste. This Profiled Honing wheel screws onto the main shaft on the same side as the standard honing wheel so both are available for use.
34.99
Price: 34.99
|
|
|
| Makita 2704X1 10 inch Table Saw, 15 Amps, 4800 RPM | Makita LCT200W Factory Reconditioned Compact Lithium-Ion 18V 2-Piece Combo Kit |
 Makita 2704X1 is a high performance table saw features an extension table to enable better cutting and the ease of ripping a 4x8 sheet of plywood. This table saw is compatible with up to a 13/16 dado saw blade. The rugged 15 Amp motor generates 4,800 RPM, which can deliver a large cutting capacity of 3-5/8 at 90 and 2-1/2 at 45.Besides, this Makita table saw is integrated with 3/8 x 3/4 T-slot miter gauge grooves that accept commercial accessories. To enhance the productivity of this Makita saw, it is installed with dead-on cam-locking rip fence and bevel locking handle. Moreover, you can adjust the blade depth with two pole slide system. Keeping in mind the traveling trouble, Makita 2704X1 has an enclosed table saw blade underneath the table. Besides, the table saw also has features such as large switches, easy to read scale, electric brake, and storage capacity for commonly used accessories.Makita 2704X1 is a high performance table saw features an extension table to enable better cutting and the ease of ripping a 4x8 sheet of plywood. This table saw is compatible with up to a 13/16 dado saw blade. The rugged 15 Amp motor generates 4,800 RPM, which can deliver a large cutting capacity of 3-5/8 at 90 and 2-1/2 at 45.Besides, this Makita table saw is integrated with 3/8 x 3/4 T-slot miter gauge grooves that accept commercial accessories. To enhance the productivity of this Makita saw, it is installed with dead-on cam-locking rip fence and bevel locking handle. Moreover, you can adjust the blade depth with two pole slide system. Keeping in mind the traveling trouble, Makita 2704X1 has an enclosed table saw blade underneath the table. Besides, the table saw also has features such as large switches, easy to read scale, electric brake, and storage capacity for commonly used accessories.
649.99
Price: 649.99
|
 The Makita LCT200W is Compact Lithium-Ion 18V 2-Pc Combo Kit. The 1/2 inch Driver-Drill delivers 450 in-lbs of efficient torque in a compact size and weighs only 3.5 lbs. The impact driver provides 1280 in-lbs of maximum torque and weighs only 2.8 lbs. Factory Reconditioned.The Makita LCT200W is Compact Lithium-Ion 18V 2-Pc Combo Kit. The 1/2 inch Driver-Drill delivers 450 in-lbs of efficient torque in a compact size and weighs only 3.5 lbs. The impact driver provides 1280 in-lbs of maximum torque and weighs only 2.8 lbs. Factory Reconditioned.
209.99
Price: 209.99
|
|
|
| Makita By Amana 733252-A 1/2-Inch Straight 2-Flute Router Bit | Makita 2414NB Factory Reconditioned 14 inch Portable Cut-Off Saw, 3800 RPM, 15.0 Amps |
 The Makita 733252-A is for general purpose routing and grooving where smoothness of cut and minimal vibration are desired.The Makita 733252-A is for general purpose routing and grooving where smoothness of cut and minimal vibration are desired.
9.75
Price: 9.75
|
 The Makita 2414NB factory reconditioned portable cut-off saw features D-shape handle for easy gripping. With its powerful 15.0 Amp motor it delivers speed of 3800 RPM.The Makita 2414NB factory reconditioned portable cut-off saw features D-shape handle for easy gripping. With its powerful 15.0 Amp motor it delivers speed of 3800 RPM.
149.99
Price: 149.99
|
|
|
| Ryobi ZRP700 Factory Reconditioned One+� Cordless 18-Volt Flashlight - Tool Only | Alltrade 830012 1/4Inch Hex Center Punch |
 Use the Ryobi ZRP700 Flashlight to light up your work space. It works with any Ryobi 180-volt battery so you can use batteries you already have for your other Ryobi 18-volt tools. Trigger style on-off switch makes this flashlight easy to use and a high intensity bulb produces brighter light.Use the Ryobi ZRP700 Flashlight to light up your work space. It works with any Ryobi 180-volt battery so you can use batteries you already have for your other Ryobi 18-volt tools. Trigger style on-off switch makes this flashlight easy to use and a high intensity bulb produces brighter light.
9.99
Price: 9.99
|
 The Alltrade 830012 is a 1/4 Hex Center Punch. It has durable high carbon steel construction with comfortable PVC grip. The punch is used for starting holes in wood or metal or to align rivet or bolt holes, piercing or marking metal for starting drills and marking an indent before a hole is bored with a drilling machine.The Alltrade 830012 is a 1/4 Hex Center Punch. It has durable high carbon steel construction with comfortable PVC grip. The punch is used for starting holes in wood or metal or to align rivet or bolt holes, piercing or marking metal for starting drills and marking an indent before a hole is bored with a drilling machine.
1.99
Price: 1.99
|
|
|
| Alltrade 835706 TradesPro 18 Lb 60-Inch x 1-1/4 Inch Loading Bar | Alltrade 835711 24Inch Aligning Bar |
 The Alltrade 835706 is a TradesPro 18 Lb, 60-Inch x 1-1/4 Inch Loading Bar. This large-sized bar for prying and moving heavy objects and is made of forged, heat-treated carbon steel so it's very durable. A corrosion resistant gray finish.The Alltrade 835706 is a TradesPro 18 Lb, 60-Inch x 1-1/4 Inch Loading Bar. This large-sized bar for prying and moving heavy objects and is made of forged, heat-treated carbon steel so it's very durable. A corrosion resistant gray finish.
39.99
Price: 39.99
|
 The Alltrade 835711 is a 24 Aligning Bar. It is a medium-sized bar for prying, cutting and digging work. It has forged, heat-treated carbon steel bit and handle with corrosion-resistant gray finish.The Alltrade 835711 is a 24 Aligning Bar. It is a medium-sized bar for prying, cutting and digging work. It has forged, heat-treated carbon steel bit and handle with corrosion-resistant gray finish.
5.99
Price: 5.99
|
|
|
| Terralux TLW-36 30-LED Worklight plus 6-LED Flash Torch with 3 AAA Batteries | Remline 93713 13-Drawer XQL Roller Cabinet |
 36 LEDs total give a clean white ultra-bright light30 LED worklight for ambient lighting6 LED torch for directional lightSmooth wide flood pattern beam with a good rangeWork Light runs for 5 hours and the torch runs for 20 hoursLifetime bulbs rated at 100,000 hours so you never have to buy a bulb againRugged, durable, shock resistant, no glass to breakAnti-roll hexagonal base that includes a magnetBuilt-in hook for hanging, folds flat for storageMagnetic base or hook are ideal for hands free operationOn/Off switch with protective coverFast flashing mode with slide around red filter for emergency situationsBright yellow body makes it easier to locate in dark environmentsFlat base and torch head so the TLW-36 will stand upright either way on level surface36 LEDs total give a clean white ultra-bright light30 LED worklight for ambient lighting6 LED torch for directional lightSmooth wide flood pattern beam with a good rangeWork Light runs for 5 hours and the torch runs for 20 hoursLifetime bulbs rated at 100,000 hours so you never have to buy a bulb againRugged, durable, shock resistant, no glass to breakAnti-roll hexagonal base that includes a magnetBuilt-in hook for hanging, folds flat for storageMagnetic base or hook are ideal for hands free operationOn/Off switch with protective coverFast flashing mode with slide around red filter for emergency situationsBright yellow body makes it easier to locate in dark environmentsFlat base and torch head so the TLW-36 will stand upright either way on level surface
19.99
Price: 19.99
|
 All steel construction with steel inner walls for more strength and greater durabilityBall bearing drawer slides on all drawers provide better performance and hold heavier loadsRear locking mechanism locks full-length drawers in at least two locationsTubular locks provide added securityRecessed handles allow units to be positioned in work environments where space is tightRally Red powder coat paint finish resists rust and solvents5 x 2 wheels with a large toe lock on each of the swivel castors (2 swivel & 2 fixed)Overall dimensions 41-5/8W x 18D x 41-1/2H.Drawers-(4) 21-13/16W x 16-1/4D x 1-3/4H-(4) 21-13/16W x 16-1/4D x 3-1/2H-(1) 12-5/16W x 16-1/4D x 1-3/4H-(1) 12-5/16W x 16-1/4D x 3-1/2H-(1) 12-5/16W x 16-1/4D x 5-1/2H-(1) 12-5/16W x 16-1/4D x 11-3/16HTop section and tools not includedAll steel construction with steel inner walls for more strength and greater durabilityBall bearing drawer slides on all drawers provide better performance and hold heavier loadsRear locking mechanism locks full-length drawers in at least two locationsTubular locks provide added securityRecessed handles allow units to be positioned in work environments where space is tightRally Red powder coat paint finish resists rust and solvents5 x 2 wheels with a large toe lock on each of the swivel castors (2 swivel & 2 fixed)Overall dimensions 41-5/8W x 18D x 41-1/2H.Drawers-(4) 21-13/16W x 16-1/4D x 1-3/4H-(4) 21-13/16W x 16-1/4D x 3-1/2H-(1) 12-5/16W x 16-1/4D x 1-3/4H-(1) 12-5/16W x 16-1/4D x 3-1/2H-(1) 12-5/16W x 16-1/4D x 5-1/2H-(1) 12-5/16W x 16-1/4D x 11-3/16HTop section and tools not included
749.99
Price: 749.99
|
|
|
| Paslode 500910 T250A-F16 16-Gauge Pneumatic Angled Finish Nailer | Stanley 47973 8 oz. Brass Plumb Bob |
 The Paslode 500910 T250A-F16 Pneumatic Angled Finish Nailer will quickly become the workhorse of your workshop. It is powerful, yet amazingly lightweight at only 3.8 lbs., and is well-balanced for easy handling, especially when working overhead. Its compact, angled design lets you get into tight spaces that straight nailers cannot. The Paslode T250A-F16 is adjustable to your needs and all of your controls are within reach so you can get through any job quickly. The depth of drive is adjustable without tools, so you can change it with one hand for precise control on hard or soft woods. It has all of the features you want in a finish nailer, thats why it was rated #1 by the Journal of Light Construction.Attention International Customers Paslode products cannot be shipped outside of the USA.The Paslode 500910 T250A-F16 Pneumatic Angled Finish Nailer will quickly become the workhorse of your workshop. It is powerful, yet amazingly lightweight at only 3.8 lbs., and is well-balanced for easy handling, especially when working overhead. Its compact, angled design lets you get into tight spaces that straight nailers cannot. The Paslode T250A-F16 is adjustable to your needs and all of your controls are within reach so you can get through any job quickly. The depth of drive is adjustable without tools, so you can change it with one hand for precise control on hard or soft woods. It has all of the features you want in a finish nailer, thats why it was rated #1 by the Journal of Light Construction.Attention International Customers Paslode products cannot be shipped outside of the USA.
209.99
Price: 209.99
|
 Stanley 47973 is 8 oz. Brass Plumb Bob. It has a replaceable hardened steel tip. The screw top simplifies attaching string to the center of the plumb bob. Through hole ensures easy tightening.Stanley 47973 is 8 oz. Brass Plumb Bob. It has a replaceable hardened steel tip. The screw top simplifies attaching string to the center of the plumb bob. Through hole ensures easy tightening.
7.99
Price: 7.99
|
|
|
| Fastcap PSSR-16 16-Foot Reverse Read Tape Measure | Fastcap PSSR-25 25-Foot Reverse Read Tape Measure |
 The Fastcap PSSR-16 is a 16-Foot Reverse Read Tape Measure. FastCap's original line of tape measures feature a built in FastPad for jotting down measurements, a compact design, and a heavy-duty protective rubber boot. The ergonomic belt clip and built-in pencil sharpener are features that FastCap customers have requested for years. The blade on this tape is one inch wide and is designed with a four rivet nose clip that will handle the wear and tear of daily use. Easy to read scale is identified down to the 1/16-Inch.The Fastcap PSSR-16 is a 16-Foot Reverse Read Tape Measure. FastCap's original line of tape measures feature a built in FastPad for jotting down measurements, a compact design, and a heavy-duty protective rubber boot. The ergonomic belt clip and built-in pencil sharpener are features that FastCap customers have requested for years. The blade on this tape is one inch wide and is designed with a four rivet nose clip that will handle the wear and tear of daily use. Easy to read scale is identified down to the 1/16-Inch.
7.99
Price: 7.99
|
FastCap's original line of tape measures feature a built in FastPad for jotting down measurements, a compact design, and a heavy-duty protective rubber boot. The ergonomic belt clip and built-in pencil sharpener are features that FastCap customers have requested for years. The blade on this tape is one inch wide and is designed with a four rivet nose clip that will handle the wear and tear of daily use. Easy to read scale is identified down to the 1/16-Inch.FastCap's original line of tape measures feature a built in FastPad for jotting down measurements, a compact design, and a heavy-duty protective rubber boot. The ergonomic belt clip and built-in pencil sharpener are features that FastCap customers have requested for years. The blade on this tape is one inch wide and is designed with a four rivet nose clip that will handle the wear and tear of daily use. Easy to read scale is identified down to the 1/16-Inch.
10.99
Price: 10.99
|
|
|
| Bosch HCBG01 1/8 inch Industrial Hammer Drill Bit | Bosch HCBG22 3/4 inch Industrial Hammer Drill Bit |
 The Bosch HCBG01 is a 1/8 inch Industrial Hammer Drill Bit. The BlueGranite hammer drill bit delivers fast impact drilling in concrete, stone and masonry. It has low voltage, high temperature brazing which prevents the carbide cutting edge from breaking out even when heat builds up during deep drilling.The Bosch HCBG01 is a 1/8 inch Industrial Hammer Drill Bit. The BlueGranite hammer drill bit delivers fast impact drilling in concrete, stone and masonry. It has low voltage, high temperature brazing which prevents the carbide cutting edge from breaking out even when heat builds up during deep drilling.
2.99
Price: 2.99
|
The Bosch HCBG22 is a 3/4 inch Industrial Hammer Drill Bit. The BlueGranite hammer drill bit deliver fast impact drilling in concrete, stone and masonry. It has low voltage, high temperature brazing which prevents the carbide cutting edge from breaking out even when heat builds up during deep drilling.The Bosch HCBG22 is a 3/4 inch Industrial Hammer Drill Bit. The BlueGranite hammer drill bit deliver fast impact drilling in concrete, stone and masonry. It has low voltage, high temperature brazing which prevents the carbide cutting edge from breaking out even when heat builds up during deep drilling.
14.99
Price: 14.99
|
|
|
| Bosch HC2102 5/8 inch x 8 inch SDS-Plus Shank Bit - Carbide Tipped | Bosch HC2163 1 inch x 10 inch SDS-Plus Shank Bit - Carbide Tipped |
 The Bosch HC2102 5/8 inch x 8 inch SDS-Plus Shank Bit - Carbide Tipped, rotary hammer bits feature a patent-pending 4-flute design which provides fast dust removal. The carbide-tipped drill bit heads are harder, tougher and more resistant to extreme loads.The Bosch HC2102 5/8 inch x 8 inch SDS-Plus Shank Bit - Carbide Tipped, rotary hammer bits feature a patent-pending 4-flute design which provides fast dust removal. The carbide-tipped drill bit heads are harder, tougher and more resistant to extreme loads.
11.99
Price: 11.99
|
 The Bosch HC2163 is a 1 inch x 10 inch SDS-Plus Shank Bit - Carbide Tipped. Bosch SDS-plus rotary hammer bits feature a patent-pending 4-flute design which provides fast dust removal. The carbide-tipped drill bit heads are harder, tougher and more resistant to extreme loads.The Bosch HC2163 is a 1 inch x 10 inch SDS-Plus Shank Bit - Carbide Tipped. Bosch SDS-plus rotary hammer bits feature a patent-pending 4-flute design which provides fast dust removal. The carbide-tipped drill bit heads are harder, tougher and more resistant to extreme loads.
27.99
Price: 27.99
|
|
|
| DeWalt DC011R Factory Reconditioned DC011 Worksite Radio/Charger | DeWalt DCA16125 1-1/4Inch 2500 Count Angle Nails |
 Work hard, have fun at job site, with Factory Reconditioned DeWalt DC011, the charger that charges 7.2V to 18V NiCd/NIMH batteries (except Univolt) in an hour and also plays stereo or AM radio. DeWalt power charger sports oversized buttons and knobs, which is a boon at the worksite, as it can be operated with the gloves on. The AUX in port allows an mp3 or CD player, or portable satellite receiver to be connected. This factory reconditioned power tool charger uses DeWalt 7.2 V to 18 V rechargeable batteries, and thus is as good as a cordless radio.The 11-inch, dual pivoting flexible antenna ensures better reception. The dewalt reconditioned charger features a digital tuner with an LCD display, a built-in clock and 8 station presets. The speakers deliver maximum bass and are also weather resistant. As a charger too, the DeWalt DC011 is quite convenient as the weather sealed charger door opens quite easily to facilitate faster battery changes.This heavy-duty dewalt Worksite Radio is just ideal for charging your batteries as well as listening to music, whether at tough job site conditions, inside your store or even at home. Being a reconditioned product, dco11 r, has gone through multiple quality checks thus promising better performance.Work hard, have fun at job site, with Factory Reconditioned DeWalt DC011, the charger that charges 7.2V to 18V NiCd/NIMH batteries (except Univolt) in an hour and also plays stereo or AM radio. DeWalt power charger sports oversized buttons and knobs, which is a boon at the worksite, as it can be operated with the gloves on. The AUX in port allows an mp3 or CD player, or portable satellite receiver to be connected. This factory reconditioned power tool charger uses DeWalt 7.2 V to 18 V rechargeable batteries, and thus is as good as a cordless radio.The 11-inch, dual pivoting flexible antenna ensures better reception. The dewalt reconditioned charger features a digital tuner with an LCD display, a built-in clock and 8 station presets. The speakers deliver maximum bass and are also weather resistant. As a charger too, the DeWalt DC011 is quite convenient as the weather sealed charger door opens quite easily to facilitate faster battery changes.This heavy-duty dewalt Worksite Radio is just ideal for charging your batteries as well as listening to music, whether at tough job site conditions, inside your store or even at home. Being a reconditioned product, dco11 r, has gone through multiple quality checks thus promising better performance.
103.94
Price: 103.94
|
 The DeWalt DCA16125 is a box of 2500 16 Gauge 20 1-1/4 Angle Nails. These 16 gauge 20 finish nails are manufactured out of cold-worked carbon steel and galvanized in a hot-dip process, which ensures that each nail will resist rust and moisture. Nails are ideal for finish work. The DeWalt DCA16125 is a box of 2500 16 Gauge 20 1-1/4 Angle Nails. These 16 gauge 20 finish nails are manufactured out of cold-worked carbon steel and galvanized in a hot-dip process, which ensures that each nail will resist rust and moisture. Nails are ideal for finish work.
12.99
Price: 12.99
|
|
|
| DeWalt DCK675L 18V 6-Tool Combo Kit with NANO Technology | DeWalt DW2235IR 5-Piece Mag Impact Ready Pivot Nutsetter Set |
 DC927 18V Cordless Hammerdrill with DEWALT built high power motor delivers 425 unit watts out for maximum performance in all drilling and fastening applicationsDC827 18V Impact Driver delivers 1,330 in-lbs of torque and 0-2,400 rpms offering power and speed to perform a wide range of fastening applications at faster speedsDC385 18V reciprocating saw with 4-position keyless blade clamp allows for quick blade change without touching blade or reciprocating shaftDC411 18V cut-off tool with 6,500 rpm provides high power for cutting and grinding applicationsDW059 18V 1/2" High Torque Impact Wrench with 300 ft.-lbs. of maximum torqueDW919 18V flexible floodlight provides hands-free useDEWALT� exclusive NANO�-phosphate lithium ion cells offer long battery life & durability: 2,000 recharges DC927 18V Cordless Hammerdrill with DEWALT built high power motor delivers 425 unit watts out for maximum performance in all drilling and fastening applicationsDC827 18V Impact Driver delivers 1,330 in-lbs of torque and 0-2,400 rpms offering power and speed to perform a wide range of fastening applications at faster speedsDC385 18V reciprocating saw with 4-position keyless blade clamp allows for quick blade change without touching blade or reciprocating shaftDC411 18V cut-off tool with 6,500 rpm provides high power for cutting and grinding applicationsDW059 18V 1/2" High Torque Impact Wrench with 300 ft.-lbs. of maximum torqueDW919 18V flexible floodlight provides hands-free useDEWALT� exclusive NANO�-phosphate lithium ion cells offer long battery life & durability: 2,000 recharges
739.00
Price: 739.00
|
 15.99
Price: 15.99
|
|
|
| DeWalt DWS5029 Tool TrackSaw Anti Splinter Strip Replacement | DeWalt DW918 Heavy-Duty 14.4V Cordless Flexible Floodlight - Tool Only |
 Replacement zero-clearance anti-splinger edgeFor use with Dewalt Corded and Cordless TrackSawsTrackSaws Sold SeparatelyReplacement zero-clearance anti-splinger edgeFor use with Dewalt Corded and Cordless TrackSawsTrackSaws Sold Separately
19.99
Price: 19.99
|
 The DeWalt DW918 is a Heavy-Duty 14.4V Cordless Flexible Floodlight - Tool Only. The flexible neck allows for hands-free operation and light to be projected in any direction whether it is standing on its base, wrapped around a pipe or hanging from rafters overhead. Lockable head clip offers versatility and convenience of a lantern. The extra-bright Xenon bulb maximizes brightness of the beam. The DeWalt DW918 is a Heavy-Duty 14.4V Cordless Flexible Floodlight - Tool Only. The flexible neck allows for hands-free operation and light to be projected in any direction whether it is standing on its base, wrapped around a pipe or hanging from rafters overhead. Lockable head clip offers versatility and convenience of a lantern. The extra-bright Xenon bulb maximizes brightness of the beam.
44.99
Price: 44.99
|
|
|
| DeWalt DW1908B 1/8Inch Split Point Drill Bit | DeWalt DW1924B 3/8Inch Pilot Point Drill Bit |
 The DeWalt DW1908B is a 1/8" Split Point Drill Bit. These drill bits are designed to solve the common problems professionals encounter when drilling with portable drills into metal and wood. The patented pilot point tip prevents the bit form walking across the work piece while providing a clean and round hole. The no spin shank eliminates the frustration of bit spinning in the chucks.The DeWalt DW1908B is a 1/8" Split Point Drill Bit. These drill bits are designed to solve the common problems professionals encounter when drilling with portable drills into metal and wood. The patented pilot point tip prevents the bit form walking across the work piece while providing a clean and round hole. The no spin shank eliminates the frustration of bit spinning in the chucks.
1.29
Price: 1.29
|
 The DeWalt DW1924B is a 3/8" Pilot Point Drill Bit. These drill bits are designed to solve the common problems professionals encounter when drilling with portable drills into metal, wood and plastic. The patented pilot point tip prevents the bit form walking across the work piece while providing a clean and round hole. The no spin shank eliminates the frustration of bit spinning in the chucks.The DeWalt DW1924B is a 3/8" Pilot Point Drill Bit. These drill bits are designed to solve the common problems professionals encounter when drilling with portable drills into metal, wood and plastic. The patented pilot point tip prevents the bit form walking across the work piece while providing a clean and round hole. The no spin shank eliminates the frustration of bit spinning in the chucks.
5.49
Price: 5.49
|
|
|
| DeWalt DW960K-2R Factory Reconditioned DW960K-2 18-Volt 3/8-Inch Cordless Right Angle Drill/Driver Kit | DeWalt DW7441 Out feed and Side Support For DW744 Table Saw |
 The DeWalt DW960K-2 is a Factory Reconditioned 18V 3/8 inch Cordless Right Angle Drill/Driver Kit. The drill/driver kit delivers 310 in-lbs in low range 0-500 and in high speed 0-1500 it delivers 80 in-lbs of torque. The three position rubber paddle switch allows users to adjust their hand for maximum control in different applications. The 3/8 inch chuck accepts a wide variety of drill bits and other accessories. The DeWalt DW960K-2 is a Factory Reconditioned 18V 3/8 inch Cordless Right Angle Drill/Driver Kit. The drill/driver kit delivers 310 in-lbs in low range 0-500 and in high speed 0-1500 it delivers 80 in-lbs of torque. The three position rubber paddle switch allows users to adjust their hand for maximum control in different applications. The 3/8 inch chuck accepts a wide variety of drill bits and other accessories.
158.75
Price: 158.75
|
 The DeWalt DW7441 provides added material support for large work pieces. All-metal construction. Includes both out feed support and side support systems. The DeWalt DW7441 provides added material support for large work pieces. All-metal construction. Includes both out feed support and side support systems.
69.99
Price: 69.99
|
|
|
| DeWalt DW7880 Scroll Saw Stand | DeWalt DW7881 Flexible Neck Scroll Saw Worklight |
 The DeWalt DW7880 is a Scroll Saw Stand. The stand is used for DW788S scroll saw. It features all-metal construction. The rear leg is adjustable for height. The DeWalt DW7880 is a Scroll Saw Stand. The stand is used for DW788S scroll saw. It features all-metal construction. The rear leg is adjustable for height.
69.99
Price: 69.99
|
 The DeWalt DW7881 is a Flexible Neck Scroll Saw Worklight. The worklight has 22 flexible neck for easy positioning. It is used with DW788 scroll saw. The DeWalt DW7881 is a Flexible Neck Scroll Saw Worklight. The worklight has 22 flexible neck for easy positioning. It is used with DW788 scroll saw.
29.99
Price: 29.99
|
|
|
| Grip 10760 Three-Way Air Manifold | Grip 16318 Lockout Tool Kit |
 Solid brass manifold; accepts (3) air couplers at one time 1/4" inlet and outlet threads Solid brass manifold; accepts (3) air couplers at one time 1/4" inlet and outlet threads
9.99
Price: 9.99
|
 Contains thin slim jim bar, wide slim jim bar, wire form S-hook, slide lock tool, wonder tool, plastic coat hanger, (2) wedges, gas cap tool Produced for the purpose of opening doors of both domestic and foreign vehiclesContains thin slim jim bar, wide slim jim bar, wire form S-hook, slide lock tool, wonder tool, plastic coat hanger, (2) wedges, gas cap tool Produced for the purpose of opening doors of both domestic and foreign vehicles
11.99
Price: 11.99
|
|
|
| Grip 18136 8-Ton Pulley Block | Grip 20270 Pneumatic Spark Plug Cleaner |
 Accepts up to 5/16 diameter cable 16,000 lb. pulling capacity Chrome vanadium steel pulley blockAccepts up to 5/16 diameter cable 16,000 lb. pulling capacity Chrome vanadium steel pulley block
15.99
Price: 15.99
|
 -Performs abrasive cleaning or air cleaning with just the turn of a switch -Removes carbon build up and deposits, returning plugs to like new condition -Performs abrasive cleaning or air cleaning with just the turn of a switch -Removes carbon build up and deposits, returning plugs to like new condition
14.99
Price: 14.99
|
|
|
| Grip 27096 13Inch Horse Hair Brush | Grip 28581 1Inch x 15' Camo Ratchet Tie Down |
 Soft horse hair bristles for use in cleanup and sweeping delicately finished surfacesWill not scratch surface like normal bristlesSoft horse hair bristles for use in cleanup and sweeping delicately finished surfacesWill not scratch surface like normal bristles
4.99
Price: 4.99
|
 Weather resistant nylon webbing for maximum strengthTrouble free push button quick-release ratchet lock-downDurable straps will not loosen with road vibration Ideal for trucks, trailers, and hand dolliesDouble vinyl coated forged J hooks provide a secure hold without scratching3000 lbs. weight capacity. 1 inch x 15 foot strapIncludes 1Weather resistant nylon webbing for maximum strengthTrouble free push button quick-release ratchet lock-downDurable straps will not loosen with road vibration Ideal for trucks, trailers, and hand dolliesDouble vinyl coated forged J hooks provide a secure hold without scratching3000 lbs. weight capacity. 1 inch x 15 foot strapIncludes 1
4.99
Price: 4.99
|
|
|
| Grip 28612 2-Piece 15-Foot T-Handle Ratchet Tie Down | Grip 30180 12Inch Combination Square |
 The Grip 28612 is a 2-Piece 15-Foot T-Handle Ratchet Tie Down. Grip 28612 is used to secure motorcycles, ATVs, or lawn equipment to truck beds or trailers for transport. Extra wide, rubber covered T handle provides added strength for tightening while the quick release mechanism allows for easy removal. Weather and rot resistant nylon webbing.The Grip 28612 is a 2-Piece 15-Foot T-Handle Ratchet Tie Down. Grip 28612 is used to secure motorcycles, ATVs, or lawn equipment to truck beds or trailers for transport. Extra wide, rubber covered T handle provides added strength for tightening while the quick release mechanism allows for easy removal. Weather and rot resistant nylon webbing.
17.99
Price: 17.99
|
 Satin chrome finished ruler Baked enamel finished protector Leveled square head Use as a center hand, outside try square, depth gauge, scriber, 90 & 45 degree level, inside try square, and meter square 12 long with markings for inches, centimeters, and millimeters Satin chrome finished ruler Baked enamel finished protector Leveled square head Use as a center hand, outside try square, depth gauge, scriber, 90 & 45 degree level, inside try square, and meter square 12 long with markings for inches, centimeters, and millimeters
5.99
Price: 5.99
|
|
|
| Grip 34058 6Inch Spring Clamp with Grip | Grip 41140 1 lb. Fiberglass Claw Hammer |
 -Strong gripping, spring action jaws-Strong gripping, spring action jaws
1.98
Price: 1.98
|
 Drop forges, heat treated, mirror polished head High visibility, comfortable grip Epoxy wedge holds head firmly in place 50% high strength fiberglass handle 1 lb., 10 long handle Drop forges, heat treated, mirror polished head High visibility, comfortable grip Epoxy wedge holds head firmly in place 50% high strength fiberglass handle 1 lb., 10 long handle
4.99
Price: 4.99
|
|
|
| Grip 55212 Push Stick | Grip 61060 6-Piece Hollow Punch Set |
 For pushing materials on router tables, table saws, and shapers - keeps hands away from sharp blades High impact molded plastic For pushing materials on router tables, table saws, and shapers - keeps hands away from sharp blades High impact molded plastic
3.99
Price: 3.99
|
 Drop forged, heat treated steel construction Knurled grips Precision ground flutes and cutting edges Punches make clean holes in gaskets, leather, plastic, and rubber Includes 1/8, 5/32, 7/16, 7/32, 1/4, and 5/16 punches Drop forged, heat treated steel construction Knurled grips Precision ground flutes and cutting edges Punches make clean holes in gaskets, leather, plastic, and rubber Includes 1/8, 5/32, 7/16, 7/32, 1/4, and 5/16 punches
3.99
Price: 3.99
|
|
|
| Grip 81035 PVC Pipe Cutter | Grip 86004 3Inch Wire Cup Brush with 1/4Inch Shank |
 Super sharp stainless vandium blade is replaceable for longer tool life Cuts plastic pipe and similar materials with easy ratcheting action Makes perfect right angle cuts Cuts up to 1-1/2 PVC pipe Super sharp stainless vandium blade is replaceable for longer tool life Cuts plastic pipe and similar materials with easy ratcheting action Makes perfect right angle cuts Cuts up to 1-1/2 PVC pipe
6.99
Price: 6.99
|
 The Grip 86004 is a 3 Wire Cup Brush with 1/4 Shank. It features industrial quality crimped steel wire and steel housing with powder coated finish. The 1/4 steel shank fits all power drills. It removes rust, paint, scale, dirt, etc. and prepares metal surfaces for painting, welding and soldering.The Grip 86004 is a 3 Wire Cup Brush with 1/4 Shank. It features industrial quality crimped steel wire and steel housing with powder coated finish. The 1/4 steel shank fits all power drills. It removes rust, paint, scale, dirt, etc. and prepares metal surfaces for painting, welding and soldering.
1.58
Price: 1.58
|
|
|
| Grip 86025 3Inch Cut Off Wheel with Mandrel | Grip 86055 10-Pc 4Inch Metal Cut-Off Wheel Set |
 Fits most air cut off toolsGeneral purpose medium/coarse wheel is formulated for fast, high quality dry cuttingReinforced, bonded carbon cuts through steel rods, sheet metal, and muffler clampsFits most air cut off toolsGeneral purpose medium/coarse wheel is formulated for fast, high quality dry cuttingReinforced, bonded carbon cuts through steel rods, sheet metal, and muffler clamps
3.99
Price: 3.99
|
 The Grip 86055 is a 10-pc 4 Metal Cut-off Wheel. The wheels are made of aluminum oxide.The Grip 86055 is a 10-pc 4 Metal Cut-off Wheel. The wheels are made of aluminum oxide.
4.99
Price: 4.99
|
|
|
| Grip 91080 6-Piece Flare Nut Wrench Set (Metric) | Milwaukee 48-00-4182 Ice Hardened� 6-Inch 14 TPI SAWZALL� blades |
 Drop forged, heat treated, chrome plated steel construction 15 degree offset for easy access Includes Sizes 6mm, 8mm, 10mm, 12mm, 13mm, 14mm, 15mm, 17mm, 19mm, 21mm, 22mm, and 24mm (two sizes per wrench) Drop forged, heat treated, chrome plated steel construction 15 degree offset for easy access Includes Sizes 6mm, 8mm, 10mm, 12mm, 13mm, 14mm, 15mm, 17mm, 19mm, 21mm, 22mm, and 24mm (two sizes per wrench)
11.99
Price: 11.99
|
 The Milwaukee 48-01-9712 is an Ice Hardened� 6-Inch, 14 TPI SAWZALL� blade. Ice Edge� blades are processed with a patent pending cryogenic heat treatment so they can handle the toughest alloy steel materials. Unlike surface coatings that wear away, cryogenics harden to the core by minimizing soft metal (austenite) and creating more hard metal (martensite). The result is a product that is more consistently hard throughout. These blades are made from Matrix II bi-metal material with 8% cobalt. The bi-metal design allows for faster cutting, longer life blades that can bend without shattering.The Milwaukee 48-01-9712 is an Ice Hardened� 6-Inch, 14 TPI SAWZALL� blade. Ice Edge� blades are processed with a patent pending cryogenic heat treatment so they can handle the toughest alloy steel materials. Unlike surface coatings that wear away, cryogenics harden to the core by minimizing soft metal (austenite) and creating more hard metal (martensite). The result is a product that is more consistently hard throughout. These blades are made from Matrix II bi-metal material with 8% cobalt. The bi-metal design allows for faster cutting, longer life blades that can bend without shattering.
12.99
Price: 12.99
|
|
|
| Milwaukee 48-59-2810 V28 220V Lithium-Ion International Battery Charger | Acme� A954DDPB 1/4Inch FPT Hex Coupling Brass Pipe Fitting |
 Input Power: 220 Volt ~ 240 Volt, 50 - 60 Hertz, CE ApprovedFor use with all Milwaukee 18 - 28 volt batteries Lithium-Ion, NiCD and NiMH batteriesOne hour chargerHigh visibility charge indicatorThis charger for 220 volt input power only2 year warrantyFor use in EU, AS and CH for our International customersInput Power: 220 Volt ~ 240 Volt, 50 - 60 Hertz, CE ApprovedFor use with all Milwaukee 18 - 28 volt batteries Lithium-Ion, NiCD and NiMH batteriesOne hour chargerHigh visibility charge indicatorThis charger for 220 volt input power only2 year warrantyFor use in EU, AS and CH for our International customers
74.99
Price: 74.99
|
 1/4 FPT, 1/4 FPT Adapt or control any air or water line Designed for use with brass, copper or iron pipe1/4 FPT, 1/4 FPT Adapt or control any air or water line Designed for use with brass, copper or iron pipe
1.99
Price: 1.99
|
|
|
| Acme� A968DPB 1/4Inch MPT Internal Seat Drain Cock Brass Pipe Fitting | Porter-Cable CFNBNS Factory Reconditioned Three Nailer/Compressor Combo Kit |
 1/4 MPT Adapt or control any air or water line Designed for use with brass, copper or iron pipe1/4 MPT Adapt or control any air or water line Designed for use with brass, copper or iron pipe
2.99
Price: 2.99
|
 The Porter-Cable CFNBNS is a Factory Reconditioned Combo Kit. This combo kit includes a Finish Nailer, Brad Nailer, Stapler, and Compressor. The 150-PSI Porter-Cable compressor with two couplers works on standard household current. Besides driving a large quantity of nails in a single tank charge, the 6-gallon compressor combo proves useful for other pneumatic tools as well. The two quick connect couplers allow two nail guns to powered at the same time. Besides being quick on recovery, it is also oil-free and maintenance free. This portable compressor weighs just 34 pounds and has a handle on top for easily moving it around. The hardened driver blade ensures maximum durability and reliability for the Cable nailer. The special design of the tool-free jam release affords a clear line of sight and cuts down on interruptions. The nailer's depth of drive can be easily adjusted and the nose tip does not mar the work surface. Die-cast aluminum used in the construct of the body makes the nailer lightweight for extended hours of use and yet strong enough to withstand the harsh jobsite treatment. The Porter-Cable stapler is sturdy and responsive, and does well for upholstery and other furniture coverings etc.The Porter-Cable CFNBNS is a Factory Reconditioned Combo Kit. This combo kit includes a Finish Nailer, Brad Nailer, Stapler, and Compressor. The 150-PSI Porter-Cable compressor with two couplers works on standard household current. Besides driving a large quantity of nails in a single tank charge, the 6-gallon compressor combo proves useful for other pneumatic tools as well. The two quick connect couplers allow two nail guns to powered at the same time. Besides being quick on recovery, it is also oil-free and maintenance free. This portable compressor weighs just 34 pounds and has a handle on top for easily moving it around. The hardened driver blade ensures maximum durability and reliability for the Cable nailer. The special design of the tool-free jam release affords a clear line of sight and cuts down on interruptions. The nailer's depth of drive can be easily adjusted and the nose tip does not mar the work surface. Die-cast aluminum used in the construct of the body makes the nailer lightweight for extended hours of use and yet strong enough to withstand the harsh jobsite treatment. The Porter-Cable stapler is sturdy and responsive, and does well for upholstery and other furniture coverings etc.
279.99
Price: 279.99
|
|
|
| Porter-Cable C3151 Factory Reconditioned Job Boss 1.6 HP Portable Air Compressor, 4.5 Gallon, 150 PSI | Porter-Cable C6110 Factory Reconditioned Oil-Free Induction Vertical Portable Air Compressor |
 The Porter-Cable C3151 is a Factory Recondition Job Boss 1.6 HP 4.5 Gallon Portable Air Compressor. It features high-flow air regulator and 2-port removable console. The ability to remove the console gives the user the opportunity to remote air regulation and gain higher air pressure closer to the job site. The full roll cage frame adds protection for the pump and motor. It include mobility kit for increased portability on the jobsite. The Porter-Cable C3151 is a Factory Recondition Job Boss 1.6 HP 4.5 Gallon Portable Air Compressor. It features high-flow air regulator and 2-port removable console. The ability to remove the console gives the user the opportunity to remote air regulation and gain higher air pressure closer to the job site. The full roll cage frame adds protection for the pump and motor. It include mobility kit for increased portability on the jobsite.
359.99
Price: 359.99
|
 The Porter-Cable C6110 is a Factory Reconditioned 1.9 HP 25 Gallon Vertical Portable Air Compressor. The C6110 oil free, space saving vertical, wheeled portable air compressor provides 25 Gallon of air tank reserve at a 150 PSI maximum pressure which provides 71% more usable air over traditional 125 PSI maximum air pressure units operating tools that require 90 PSI. This allows more tool run time and more work to be completed in-between recharges. With a pressure switch controller that automatically restarts the motor at the 120 PSI falling tank pressure point, user get this quicker motor/pump operation and bonus air delivery. The C6110 supports all nailing applications and moderate air tool usage of most air tools. A 120V, 1.9 running HP capacitor start induction motor runs on a 15 Amps circuit and provides 7.7 SCFM at 40 PSI and 5.4 SCFM at 90 PSI. The Porter-Cable C6110 is a Factory Reconditioned 1.9 HP 25 Gallon Vertical Portable Air Compressor. The C6110 oil free, space saving vertical, wheeled portable air compressor provides 25 Gallon of air tank reserve at a 150 PSI maximum pressure which provides 71% more usable air over traditional 125 PSI maximum air pressure units operating tools that require 90 PSI. This allows more tool run time and more work to be completed in-between recharges. With a pressure switch controller that automatically restarts the motor at the 120 PSI falling tank pressure point, user get this quicker motor/pump operation and bonus air delivery. The C6110 supports all nailing applications and moderate air tool usage of most air tools. A 120V, 1.9 running HP capacitor start induction motor runs on a 15 Amps circuit and provides 7.7 SCFM at 40 PSI and 5.4 SCFM at 90 PSI.
399.99
Price: 399.99
|
|
|
| Porter-Cable 5561 Size 10 Tube Biscuits (125-Pack) | Porter-Cable FN16100 1 inch 16 Gauge Finish Nails |
 The Porter-Cable 5561 Tube Biscuits are made from compressed Beech wood. These plate joining biscuits swell when they absorb water-based glues, further strengthening a wood joint. At 5/32 inch thick, they will fit slots cut by all standard plate joiners. They come packaged in a re-sealable and reusable container that keeps the biscuits dry and protected from moisture while in storage. The Porter-Cable 5561 Tube Biscuits are made from compressed Beech wood. These plate joining biscuits swell when they absorb water-based glues, further strengthening a wood joint. At 5/32 inch thick, they will fit slots cut by all standard plate joiners. They come packaged in a re-sealable and reusable container that keeps the biscuits dry and protected from moisture while in storage.
6.99
Price: 6.99
|
 1 inch 16-Gauge Finish NailsFor FN model Stapler/Nailer2500 per Box 1 inch 16-Gauge Finish NailsFor FN model Stapler/Nailer2500 per Box
8.99
Price: 8.99
|
|
|
| Porter-Cable 42950 1/2 inch Collet Assembly | Delta 28-032 93-1/2Inch x 1/8Inch 14 TPI Band Saw Blade (14Inch Band Saw) |
 The Porter-Cable 42950 is a 1/2 inch collet. The collet is for use with the Porter-Cable routers. The collet fits Porter-Cable router models 690, 690LR, 9690LR, 691, 693, 890, 891, 892, 7518, 7519, 7536, 7537, 7538, 7539. It has an auto-release design which keeps the collet captive in the collet nut so the collet is automatically released from the arbor as the collet nut is loosened. The Porter-Cable 42950 is a 1/2 inch collet. The collet is for use with the Porter-Cable routers. The collet fits Porter-Cable router models 690, 690LR, 9690LR, 691, 693, 890, 891, 892, 7518, 7519, 7536, 7537, 7538, 7539. It has an auto-release design which keeps the collet captive in the collet nut so the collet is automatically released from the arbor as the collet nut is loosened.
11.99
Price: 11.99
|
 The Delta 28-032 is a band saw blade. The band saw blade is high carbon steel blade with precision machined and set teeth for accuracy. The band saw blade is tension-tested for its strength. The Delta 28-032 is a band saw blade. The band saw blade is high carbon steel blade with precision machined and set teeth for accuracy. The band saw blade is tension-tested for its strength.
12.99
Price: 12.99
|
|
|
| Delta 28-052 105Inch x 3/4Inch 4 TPI Band Saw Blade (14Inch Band Saw with Height Attachment) | Delta 37-157 Jointer Pal (TM) Knife Setting Jig for Jointers |
 The Delta 28-052 is a band saw blade. It is a high carbon steel blade with precision machined and set teeth for accuracy. The band saw blade is tension-tested for its strength. The Delta 28-052 is a band saw blade. It is a high carbon steel blade with precision machined and set teeth for accuracy. The band saw blade is tension-tested for its strength.
14.99
Price: 14.99
|
 The Delta 37-157 are Jointer Pal(TM) Knife Setting Jig for Jointers. It is Fast, safe, easy-to-use. The patented magnetic design holds knives at the correct protrusion ( .002 inch) and parallel to outside cutter head surface for accurate, fast knife adjustment or replacement in just 10 minutes. Can prolong the life of planer and jointer knives as much as five times. The Delta 37-157 are Jointer Pal(TM) Knife Setting Jig for Jointers. It is Fast, safe, easy-to-use. The patented magnetic design holds knives at the correct protrusion ( .002 inch) and parallel to outside cutter head surface for accurate, fast knife adjustment or replacement in just 10 minutes. Can prolong the life of planer and jointer knives as much as five times.
84.99
Price: 84.99
|
|
|
| Delta 50-356 4 inch Dust Collection Quick Connect | Irwin� Quick-Grip� 59200 Curved Bar Clamp |
 The Delta 50-356 is a 4 inch Dust Collection Quick Connect. It works without clamps to quickly thread to a 4 inch dust collection hose for a positive fit. The Delta 50-356 is a 4 inch Dust Collection Quick Connect. It works without clamps to quickly thread to a 4 inch dust collection hose for a positive fit.
3.99
Price: 3.99
|
 Jaws are designed to reach around odd shapesOne handed operation, just squeeze to adjust and lock & click to releaseNon-marring swivel padsJaws are designed to reach around odd shapesOne handed operation, just squeeze to adjust and lock & click to releaseNon-marring swivel pads
7.99
Price: 7.99
|
|
|
| Hobart Welders 770190 Welding Value Pack - Welding Glove, Chipping Hammer, & Helmet | Hobart Welders 770193 Stick Welder Value Pack - Gloves, Helmet, and Hammer/Brush |
 Hobart Welders 770190 is a Welding Value Pack. It contains 1 pair of welding gloves, 1 straight chipping hammer and 1 - 2 x 4-1/4 flip-front #10 shade welding helmet.Hobart Welders 770190 is a Welding Value Pack. It contains 1 pair of welding gloves, 1 straight chipping hammer and 1 - 2 x 4-1/4 flip-front #10 shade welding helmet.
29.99
Price: 29.99
|
 The Hobart Welders 770193 is a Deluxe Combo Pack. Contains 1 - 4-1/2 x 5-1/4 flip front welding helmet, 1 chipping hammer/brush and 1 pair deluxe welding gloves.The Hobart Welders 770193 is a Deluxe Combo Pack. Contains 1 - 4-1/2 x 5-1/4 flip front welding helmet, 1 chipping hammer/brush and 1 pair deluxe welding gloves.
38.99
Price: 38.99
|
|
|
| Stabila 07430 REC300 DE-TECH Receiver with Digital Elevation Technology | Stabila 07470 Red Filter Laser Enhancement Glasses |
 Digital read out- tells you exactly how far from grade you areArrows, point in the direction of and intuitively guide you towards gradeDust and water proof- submersible (IP67)Extremely durable-passes the toughest drop tests of 10Dual displays-front and backLarge 4" laser receiving bandDigital read out- tells you exactly how far from grade you areArrows, point in the direction of and intuitively guide you towards gradeDust and water proof- submersible (IP67)Extremely durable-passes the toughest drop tests of 10Dual displays-front and backLarge 4" laser receiving band
299.99
Price: 299.99
|
 The Stabila 07470 Red Filter Laser Enhancement Glasses will help increase the visibility of laser lines, particularly indoors in bright conditions.The Stabila 07470 Red Filter Laser Enhancement Glasses will help increase the visibility of laser lines, particularly indoors in bright conditions.
14.99
Price: 14.99
|
|
|
| Stabila 08590 Elevator Tripod with Lift | Fein 6-39-03-178-01-7 MultiMaster Rigid Scraper Blade |
 The Stabila 08590 is an Elevator Tripod with Lift. Its height ranges from 47" to 90". The elevator column has an adjustment range of 13". The tripod comes with an interlocking leg system and shoulder strap. Total weight: 6. 5 pounds. Rigid, strong aluminum extrusions combined with replaceable steel feet allow for durability. Accordion style bellow system keeps the rack and pinion adjustment mechanism keep the unit running smooth.The Stabila 08590 is an Elevator Tripod with Lift. Its height ranges from 47" to 90". The elevator column has an adjustment range of 13". The tripod comes with an interlocking leg system and shoulder strap. Total weight: 6. 5 pounds. Rigid, strong aluminum extrusions combined with replaceable steel feet allow for durability. Accordion style bellow system keeps the rack and pinion adjustment mechanism keep the unit running smooth.
349.99
Price: 349.99
|
 This is a Fein 6-39-03-178-01-7 MultiMaster Rigid Scraper Blade. This is a rigid scraper blade for the MultiMate tool. This blade can be used any time for a putty knife for removing paint, linoleum flooring, and even carpeting in smaller areas. The blade can be re-sharpened for longer life. This blade also works very well for removing window putty.This is a Fein 6-39-03-178-01-7 MultiMaster Rigid Scraper Blade. This is a rigid scraper blade for the MultiMate tool. This blade can be used any time for a putty knife for removing paint, linoleum flooring, and even carpeting in smaller areas. The blade can be re-sharpened for longer life. This blade also works very well for removing window putty.
29.99
Price: 29.99
|
|
|
| Fein 6-35-02-122-04-2 2-1/2 Inch Precision E-Cut SuperCut Blades - 5 Pack | Bessey KLI3.008 8Inch KliKlamp Ratcheting Bar Clamp |
 The Fein 6-35-02-122-04-2 2-1/2 Inch Precision E-Cut Blades are made for the Fein SuperCut tool. They are suitable for wood, plasterboard, and many plastics and are used when extreme precision is required. The E-Cut Blades are designed with a flush-cut so you can place the blades flat on surfaces perpendicular to your cut. You can cut almost as fast as a jigsaw or reciprocating saw without losing precision quality.The Fein 6-35-02-122-04-2 2-1/2 Inch Precision E-Cut Blades are made for the Fein SuperCut tool. They are suitable for wood, plasterboard, and many plastics and are used when extreme precision is required. The E-Cut Blades are designed with a flush-cut so you can place the blades flat on surfaces perpendicular to your cut. You can cut almost as fast as a jigsaw or reciprocating saw without losing precision quality.
119.99
Price: 119.99
|
 Magnesium jaw, glass-fiber reinforced, polymid lever and world-famous Bessey steel rail Provides pressure form light as a feathers touch to 330 lbs./ Ratchet action resists vibration - the perfect clamp around power tools Quick clamping and quick release Large, glue resistant caps 8 rail length (max. opening), 3 throat. Provide 330 lbs. of pressure. Magnesium jaw, glass-fiber reinforced, polymid lever and world-famous Bessey steel rail Provides pressure form light as a feathers touch to 330 lbs./ Ratchet action resists vibration - the perfect clamp around power tools Quick clamping and quick release Large, glue resistant caps 8 rail length (max. opening), 3 throat. Provide 330 lbs. of pressure.
18.99
Price: 18.99
|
|
|
| Bessey KLI3.012 12Inch KliKlamp Ratcheting Bar Clamp | Kreg KJSCD Stop Collar for 3/8Inch Drill Bit |
 The Bessey KLI3.012 is a 12" KliKlamp Ratcheting Bar Clamp. This ratchet bar clamp has magnesium jaw, glass-fiber reinforced, polymid lever. It also features quick clamping and quick release on virtually any shape. It is perfect for any pressure up to 330 lbs. The Bessey KLI3.012 is a 12" KliKlamp Ratcheting Bar Clamp. This ratchet bar clamp has magnesium jaw, glass-fiber reinforced, polymid lever. It also features quick clamping and quick release on virtually any shape. It is perfect for any pressure up to 330 lbs.
21.49
Price: 21.49
|
 -Stop collar for 3/8 step drill bit-For setting proper drilling depth-Allen wrench included-Stop collar for 3/8 step drill bit-For setting proper drilling depth-Allen wrench included
2.99
Price: 2.99
|
|
|
| Kreg PRS3090 4-Pc 3Inch Dual Locking Caster Set | Kreg KKS-KLRBK Large Bench Clamp 6 Inch Reach Cushion Grip |
 The Kreg PRS3090 is a 4-Pc 3" Dual Locking Caster Set. It has dual-Locking mechanism which protects against caster roll and pivot. It adds true mobility to the universal steel stand. The Kreg PRS3090 is a 4-Pc 3" Dual Locking Caster Set. It has dual-Locking mechanism which protects against caster roll and pivot. It adds true mobility to the universal steel stand.
59.99
Price: 59.99
|
 The Kreg KKS-KLRBK is a Large 6-Inch Reach Cushion Grip Bench Clamp. This unique clamp glides along the Klamp Trak or secures to the Klamp Plate, providing an amazingly strong 360 Degree clamping station wherever you need it most. Simply remove the Bench Klamp to regain your perfectly flush work surface. Extended reach model features 6-Inch reach and works with stop up to 6-Inch thick.The Kreg KKS-KLRBK is a Large 6-Inch Reach Cushion Grip Bench Clamp. This unique clamp glides along the Klamp Trak or secures to the Klamp Plate, providing an amazingly strong 360 Degree clamping station wherever you need it most. Simply remove the Bench Klamp to regain your perfectly flush work surface. Extended reach model features 6-Inch reach and works with stop up to 6-Inch thick.
34.99
Price: 34.99
|
|
|
| Kreg KKS-KBKSYS Bench Clamp System Cushion Grip | Kreg KKS-KLBKSYS Heavy Duty Bench Clamp System Cushion Grip |
 The Kreg KKS-KBKSYS is a Bench Clamp System with Cushion Grip. Add a helping hand to your workbench with Kreg's Bench Klamp Systems. Perfect for assembling pocket hole joints, or as a general hold-down when routing, sanding, and more. Kreg's most popular Bench Klamp consists of a 3-Inch x 4-Inch x 1/4-Inch thick hard-anodized aluminum insert plate and clamp. Insert plates are also sold separately that can be routed into your workbench to add multiple clamping locations.The Kreg KKS-KBKSYS is a Bench Clamp System with Cushion Grip. Add a helping hand to your workbench with Kreg's Bench Klamp Systems. Perfect for assembling pocket hole joints, or as a general hold-down when routing, sanding, and more. Kreg's most popular Bench Klamp consists of a 3-Inch x 4-Inch x 1/4-Inch thick hard-anodized aluminum insert plate and clamp. Insert plates are also sold separately that can be routed into your workbench to add multiple clamping locations.
42.99
Price: 42.99
|
 The Kreg KKS-KLBKSYS is a Heavy Duty Bench Clamp System with Cushion Grip . If you like the idea of using Kreg's face clamps to keep your joints flush while driving the screw, you'll love the added assembly ease and unlimited flexibility of the Universal Bench Klamp. This clamping system includes a 10-Inch x 10-Inch x 1/4-Inch thick steel plate along with a modified 11-Inch face clamp that easily slides in and out of the channel machined into the plate. Simply rout the steel plate into your workbench to make it flush, insert the clamp and you have a 360 degree pivoting clamping station for all of your pocket hole needs. The clamp is then easily removable to leave you with a perfectly flat work surface. The Universal Bench Klamp also functions as a general hold-down clamp for routing, sanding and securing our other pocket hole tools (Mini Kreg Jig and Rocket Jig) while drilling your pocket holes.The Kreg KKS-KLBKSYS is a Heavy Duty Bench Clamp System with Cushion Grip . If you like the idea of using Kreg's face clamps to keep your joints flush while driving the screw, you'll love the added assembly ease and unlimited flexibility of the Universal Bench Klamp. This clamping system includes a 10-Inch x 10-Inch x 1/4-Inch thick steel plate along with a modified 11-Inch face clamp that easily slides in and out of the channel machined into the plate. Simply rout the steel plate into your workbench to make it flush, insert the clamp and you have a 360 degree pivoting clamping station for all of your pocket hole needs. The clamp is then easily removable to leave you with a perfectly flat work surface. The Universal Bench Klamp also functions as a general hold-down clamp for routing, sanding and securing our other pocket hole tools (Mini Kreg Jig and Rocket Jig) while drilling your pocket holes.
68.99
Price: 68.99
|
|
|
| CheckPoint 302 880 Square Laser Level | Big Horn 11500 5Inch X 4Inch Adaptor |
 The CheckPoint 302 is the new 880 Square Laser Level. The new 880 SQUARE is like no other tool in the marketplace. It combines the proven design of the 880 series but incorporates a patented 45 and 90 degree squaring feature that uniquely allows both flush and offset use of the adjustable squaring system. Along with the squaring system, we have added a threaded aperture, which will adapt all CHECKPOINT lenses and accessory attachments to the nose of the 880 SQUARE. It also incorporates a stronger, brighter 650nm Class III laser systems. It comes in either a tradesman case, which accepts the addition of lenses and a Mag Base, or as a complete presentation kit, which includes the lenses and Bipod system as one full kit.The CheckPoint 302 is the new 880 Square Laser Level. The new 880 SQUARE is like no other tool in the marketplace. It combines the proven design of the 880 series but incorporates a patented 45 and 90 degree squaring feature that uniquely allows both flush and offset use of the adjustable squaring system. Along with the squaring system, we have added a threaded aperture, which will adapt all CHECKPOINT lenses and accessory attachments to the nose of the 880 SQUARE. It also incorporates a stronger, brighter 650nm Class III laser systems. It comes in either a tradesman case, which accepts the addition of lenses and a Mag Base, or as a complete presentation kit, which includes the lenses and Bipod system as one full kit.
82.99
Price: 82.99
|
 -4-5/8 inches long by 5 inches round OD on one side and 4 inches round OD on the other. Connects 5 dust hose to 4 dust hose.-4-5/8 inches long by 5 inches round OD on one side and 4 inches round OD on the other. Connects 5 dust hose to 4 dust hose.
3.99
Price: 3.99
|
|
|
| Big Horn 11748 4-Inch Hose and Pipe Hangers - 5-Pack | Big Horn 19611 Jointer Knife Setting Jig |
 The Big Horn 11748 Hose and Pipe Hangers are a set of 5 heavy-duty I-beam style J-hooks with 6 pre-drilled mounting holes for versatile and secure mounting. You can even mount the hanger parallel to walls or floor joists. The overall length is 16, allowing you to suspend your hose or pipe below floor joists or rafters. The 11748 comes with mounting screws so youll have everything you need for installation.The Big Horn 11748 Hose and Pipe Hangers are a set of 5 heavy-duty I-beam style J-hooks with 6 pre-drilled mounting holes for versatile and secure mounting. You can even mount the hanger parallel to walls or floor joists. The overall length is 16, allowing you to suspend your hose or pipe below floor joists or rafters. The 11748 comes with mounting screws so youll have everything you need for installation.
12.99
Price: 12.99
|
 -The Big Horn 19611 is a Jointer Knife Setting Jig. To set the jointer knife, simply lay the jig flat on the rear table of jointer with the magnets face down to quickly hold blades in perfect alignment. It is used with 3 or 4 knife cutterheads from 4-Inches to 13-Inches and eliminates the frustration of nicked knifes completely. This jig comes in a wooden storage box.-The Big Horn 19611 is a Jointer Knife Setting Jig. To set the jointer knife, simply lay the jig flat on the rear table of jointer with the magnets face down to quickly hold blades in perfect alignment. It is used with 3 or 4 knife cutterheads from 4-Inches to 13-Inches and eliminates the frustration of nicked knifes completely. This jig comes in a wooden storage box.
59.99
Price: 59.99
|
|
|
| Big Horn 20200 8-Inch Dovetail Saw | Mercer 624020 4-1/2� x 1/4� x 7/8� Depressed Center Single Grit Metal Grinding Wheel |
 The Big Horn 20200 8 Dovetail Saw is made in Sheffield, England for Big Horn. It is a fine piece of work with a stained beechwood handle, but looks arent the only thing it has going for it. The 20200 Dovetail Saws blade is made of high carbon steel and has 20 teeth per inch to make dovetailing drawers a cinch.The Big Horn 20200 8 Dovetail Saw is made in Sheffield, England for Big Horn. It is a fine piece of work with a stained beechwood handle, but looks arent the only thing it has going for it. The 20200 Dovetail Saws blade is made of high carbon steel and has 20 teeth per inch to make dovetailing drawers a cinch.
77.99
Price: 77.99
|
 The Mercer 624020 is a 4-1/2 x 1/4 x 7/8 Depressed Center Single Grit Metal Grinding Wheel. The metal grinding wheel is used for grinding all ferrous metals, steel, structural steel, rebar, bar stock, pipe and welds. The grinding wheel has an aluminum oxide grain which increases the life of the wheel. The wheel is also internally reinforced with layers of high tensile strength fiberglass and has a dual grit blend.The Mercer 624020 is a 4-1/2 x 1/4 x 7/8 Depressed Center Single Grit Metal Grinding Wheel. The metal grinding wheel is used for grinding all ferrous metals, steel, structural steel, rebar, bar stock, pipe and welds. The grinding wheel has an aluminum oxide grain which increases the life of the wheel. The wheel is also internally reinforced with layers of high tensile strength fiberglass and has a dual grit blend.
2.99
Price: 2.99
|
|
|
| Mercer 396MRN 4 1/2InchX7/8Inch Aluminum Oxide Prep Wheel | Mercer 396BLK 4 1/2InchX7/8Inch Silicon Carbide Prep Wheel |
 -Type 27 shape-Available with 5/8-11 threaded hub-Non-woven synthetic fiber impregnated with abrasive grain-Three different grades-Type 27 shape-Available with 5/8-11 threaded hub-Non-woven synthetic fiber impregnated with abrasive grain-Three different grades
3.99
Price: 3.99
|
-Type 27 shape-Available with 5/8-11 threaded hub-Non-woven synthetic fiber impregnated with abrasive grain-Three different grades-Type 27 shape-Available with 5/8-11 threaded hub-Non-woven synthetic fiber impregnated with abrasive grain-Three different grades
8.99
Price: 8.99
|
|
|
| Mercer 340080 Flap Disc 80 Grit | Pull'R Holdings 01035 35 pocket Organizer |
 -Fiberglass backing -Heavy X-weight cloth -Resin on resin bond -With/without hub -Fiberglass backing -Heavy X-weight cloth -Resin on resin bond -With/without hub
6.99
Price: 6.99
|
 -The Bucket Boss 35 is made of water-resistant 600-denier fabric with 27 outside pockets and 8 inside. The large interior pockets are perfect for spray cans and larger hand tools. The tape measure pocket enables quick access for one of your most used tools--no more fumbling for the 30-footer. The stay-open hammer loops feature heavy-duty, bar-tacked webbing thats specially designed to keep its shape. -The Bucket Boss 35 is made of water-resistant 600-denier fabric with 27 outside pockets and 8 inside. The large interior pockets are perfect for spray cans and larger hand tools. The tape measure pocket enables quick access for one of your most used tools--no more fumbling for the 30-footer. The stay-open hammer loops feature heavy-duty, bar-tacked webbing thats specially designed to keep its shape.
9.99
Price: 9.99
|
|
|
| Performance W142 Pitman Arm Puller | Performance W805C 3/8Inch Drive Universal Joint |
 Drop forged steelOpening size 1-5/16 Pull travel 2-1/2Fits most cars and light trucksDrop forged steelOpening size 1-5/16 Pull travel 2-1/2Fits most cars and light trucks
8.99
Price: 8.99
|
 Heat treated alloy steelDrop forged for strength Polished chrome plated finishHeat treated alloy steelDrop forged for strength Polished chrome plated finish
3.99
Price: 3.99
|
|
|
| Performance W32534 1/2Inch Drive 1-1/16Inch 12-Point Socket | Baxter Creek SS002 6Inch Sander Sitter |
 Heat treated alloy steel Drop forged for strength Polished chrome plated finish 1/2 drive. 1-1/16 12-point deep socket. Heat treated alloy steel Drop forged for strength Polished chrome plated finish 1/2 drive. 1-1/16 12-point deep socket.
3.99
Price: 3.99
|
 The Baxter Creek SS002 is a 6 Sander Sitter. The sander sitter allows to set random orbit sander down while running, to maneuver work and at the same time cleans sanding disc, extending the life of paper 4-5 times longer. It also allows to set the sander down when user shut it off eliminating that aggravating wind-down. The Sander Sitter 6 is designed to work with all 6 Random Orbital Disc sanders, whether electric or pneumatic. Included is a custom support arm which allows the sander sitter 6 to accommodate right angle or barrel grip sanders. The Baxter Creek SS002 is a 6 Sander Sitter. The sander sitter allows to set random orbit sander down while running, to maneuver work and at the same time cleans sanding disc, extending the life of paper 4-5 times longer. It also allows to set the sander down when user shut it off eliminating that aggravating wind-down. The Sander Sitter 6 is designed to work with all 6 Random Orbital Disc sanders, whether electric or pneumatic. Included is a custom support arm which allows the sander sitter 6 to accommodate right angle or barrel grip sanders.
20.99
Price: 20.99
|
|
|
| Performance W80274 10-Piece T-Handle Hex Key Set SAE. | Powermatic 6295858K Outboard Turning Assembly for the 4224 Lathe |
 Heat treated alloy steel shaftsPlastic grips add comfort & turning power10 Sizes 3/32 - 3/8 Bonus storage tray mounts on wall/benchHeat treated alloy steel shaftsPlastic grips add comfort & turning power10 Sizes 3/32 - 3/8 Bonus storage tray mounts on wall/bench
8.99
Price: 8.99
|
The Powermatic 6295858K Outboard Turning Assembly for the 4224 Lathe includes the 6295845 20" Short Bed Extension with Leg and the 6295846 24" Outboard Toolrest Base Assembly.The Powermatic 6295858K Outboard Turning Assembly for the 4224 Lathe includes the 6295845 20" Short Bed Extension with Leg and the 6295846 24" Outboard Toolrest Base Assembly.
699.99
Price: 699.99
|
|
|
| Jet 708801 JJ-6K 6Inch Jointer Knife Set for Jet JJ-6CSXW | Chicago Pneumatic CP857 Heavy-Duty 7Inch Angle Grinder |
 The Jet 708801 JJ-6K is a 6 jointer knife set for model JJ-6CSXW. The 3-knife cutterhead allows rapid cutting while producing a superior finishThe Jet 708801 JJ-6K is a 6 jointer knife set for model JJ-6CSXW. The 3-knife cutterhead allows rapid cutting while producing a superior finish
64.99
Price: 64.99
|
 -Powerful 1.25 HP high performance motor for fast metal removal-Aluminum alloy housing is rugged, yet lightweight-Spiral bevel gearing in angle head provides extended life and smooth low vibration-Powerful 1.25 HP high performance motor for fast metal removal-Aluminum alloy housing is rugged, yet lightweight-Spiral bevel gearing in angle head provides extended life and smooth low vibration
379.99
Price: 379.99
|
|
|
| Makita N1900B Factory Reconditioned 3-1/4 Inch Planer Kit with Case | Makita 4350FCT Top Handle Jig Saw With LED Light |
 The Makita N1900B is a Factory Reconditioned 3-1/4 Inch Planer Kit with Case. The redesigned 4 Amp motor delivers more output power for increased performance. It has centering balance with front and rear grips positioned for better control, it helps eliminate gouging and uneven planing.The Makita N1900B is a Factory Reconditioned 3-1/4 Inch Planer Kit with Case. The redesigned 4 Amp motor delivers more output power for increased performance. It has centering balance with front and rear grips positioned for better control, it helps eliminate gouging and uneven planing.
89.99
Price: 89.99
|
 Anti-vibration technology along with dynamically balanced motor for over 40% reduced vibration and noise than competitive modelsIlluminate your work with on board L.E.D light for increased visibilityThree (3) orbital setting plus straight cutting with powerful 6.3 AMP motor for cutting in all varieties of materialsElectronic variable speed control dial (800-2,800 SPM) maintains consistent speed throughout the cut for superior resultsPatented tool-less blade change system for fast and easy blade installation and removalDie-cast aluminum base adjusts up to 45 right or left and positive stop at 90 for solid cutting performanceBuilt-in dust blower clears the line of cut for greater accuracyErgonomically designed rubberized top handle grip for added comfortOn-board hex wrench for fast, accurate bevel adjustmentsAnti-vibration technology along with dynamically balanced motor for over 40% reduced vibration and noise than competitive modelsIlluminate your work with on board L.E.D light for increased visibilityThree (3) orbital setting plus straight cutting with powerful 6.3 AMP motor for cutting in all varieties of materialsElectronic variable speed control dial (800-2,800 SPM) maintains consistent speed throughout the cut for superior resultsPatented tool-less blade change system for fast and easy blade installation and removalDie-cast aluminum base adjusts up to 45 right or left and positive stop at 90 for solid cutting performanceBuilt-in dust blower clears the line of cut for greater accuracyErgonomically designed rubberized top handle grip for added comfortOn-board hex wrench for fast, accurate bevel adjustments
174.99
Price: 174.99
|
|
|
| Makita BO5012K 5 inch Variable Speed Random Orbit Sander with Case, 4000-12000 OPM, 2.0 Amps | Makita MAC2400 2.5 HP Twin Stack Air Compressor |
 The Makita BO5012K is a 5 inch Variable Speed Random Orbit Sander. The Makita BO5012K Variable Speed Random Orbit Sander is perfect for polishing, finishing sanding and abrasive work with OPM ranging from 4000 to 12000. The Makita BO5012K features true random orbit action for a swirl-free finish. The Makita BO5012Ks ergonomically designed rubberized palm grip ensures comfort and control and its ultra-efficient dust collection system keeps the grit out of the way. The dust bag adjusts 360 to keep the bag conveniently out of the way.The Makita BO5012K is a 5 inch Variable Speed Random Orbit Sander. The Makita BO5012K Variable Speed Random Orbit Sander is perfect for polishing, finishing sanding and abrasive work with OPM ranging from 4000 to 12000. The Makita BO5012K features true random orbit action for a swirl-free finish. The Makita BO5012Ks ergonomically designed rubberized palm grip ensures comfort and control and its ultra-efficient dust collection system keeps the grit out of the way. The dust bag adjusts 360 to keep the bag conveniently out of the way.
89.99
Price: 89.99
|
 Low Noise - Substantially lower noise levels with a large 1720 - RPM pump-enabling greater displacement at lower RPMLow Amp Draw - Reduces incidences of tripped breakers and voltage drop that can cause premature motor failureOil Lubricated - Cooler running pump, minimizes wearRoll-Cage Construction - Complete protection to withstand extreme jobsite environmentsLarge automotive style industrial air filter for increased air intake and greater efficiencyDurable cast iron cylinder reduces wear and increases pump life; removable for easy maintenanceOil sight glass for fast, easy and efficient maintenanceLow Noise - Substantially lower noise levels with a large 1720 - RPM pump-enabling greater displacement at lower RPMLow Amp Draw - Reduces incidences of tripped breakers and voltage drop that can cause premature motor failureOil Lubricated - Cooler running pump, minimizes wearRoll-Cage Construction - Complete protection to withstand extreme jobsite environmentsLarge automotive style industrial air filter for increased air intake and greater efficiencyDurable cast iron cylinder reduces wear and increases pump life; removable for easy maintenanceOil sight glass for fast, easy and efficient maintenance
339.99
Price: 339.99
|
|
|
| Makita By Amana 733325-A 1/2-Inch Top Bearing Straight 2-Flute Router Bit | Makita BO5030K 5-Inch Random Orbit Sander Kit |
 The Makita 733325-A is good for cutting grooves, dados and rabbets where template is on top of the workpiece. It cuts flush with bearing to give exact duplication of template.The Makita 733325-A is good for cutting grooves, dados and rabbets where template is on top of the workpiece. It cuts flush with bearing to give exact duplication of template.
7.77
Price: 7.77
|
 The Makita BO5030K is a 5-Inch Random Orbit Sander Kit. This kit includes a 5-Inch random orbit sander, dust bag, case and one abrasive disc.The Makita BO5030K is a 5-Inch Random Orbit Sander Kit. This kit includes a 5-Inch random orbit sander, dust bag, case and one abrasive disc.
79.99
Price: 79.99
|
|
|
| Makita 9565CV Factory Reconditioned 5-Inch SJS Variable Speed Angle Grinder, 2800 to 10500 RPM, 12.0 Amps | Hyde 09170 Pole Sanding Kit |
 Makita 9565CV 5 inch SJS angle grinder has 12 Amp motor which delivers variable speed of 2800-10500 RPM. It has 5 stage variable speed control dial for matching the RPM to the work. The SJS - super joint system helps prevent tool kickback and gear damage caused by accidental wheel binding.Makita 9565CV 5 inch SJS angle grinder has 12 Amp motor which delivers variable speed of 2800-10500 RPM. It has 5 stage variable speed control dial for matching the RPM to the work. The SJS - super joint system helps prevent tool kickback and gear damage caused by accidental wheel binding.
89.99
Price: 89.99
|
 Allows drywall sanding without harmful dust. Fits all shop-type vacuum cleaners. Features EasyclampTM system for faster, easier abrasive loading. Universal thread for use with any extension pole.Allows drywall sanding without harmful dust. Fits all shop-type vacuum cleaners. Features EasyclampTM system for faster, easier abrasive loading. Universal thread for use with any extension pole.
24.99
Price: 24.99
|
|
|
| AO Safety 91191 Readers Safety Glasses 1.5x | AO Safety 95087 Replacement Filter/Cartridge |
 AO Safety 91191 Readers Safety Glasses 1.5x is Ideal for anyone who wears reading glasses. AO Safety 91191 is Available in 3 different magnification diopters (+1.5, +2.0, +2.5).AO Safety 91191 meets ANSI Z87.1 and CSA industrial safety standardsAO Safety 91191 Readers Safety Glasses 1.5x is Ideal for anyone who wears reading glasses. AO Safety 91191 is Available in 3 different magnification diopters (+1.5, +2.0, +2.5).AO Safety 91191 meets ANSI Z87.1 and CSA industrial safety standards
12.99
Price: 12.99
|
 AO Safety 95087 Replacement Filter/Cartridge Protects against paint, pesticide vapors, solvents, glues, thinner vapors, dust, mists & fumes Retain filter clip for reuse when replacing filters Use with 95115 and 95110 respirators Read and comply with all instructions and warnings before using Replacement Combination Cartridge Filters for Reusable Respirators Organic vapor cartridge, filter clips and R95 filter in one easy to change unit Read and comply with all instructions and warnings before using.AO Safety 95087 Replacement Filter/Cartridge Protects against paint, pesticide vapors, solvents, glues, thinner vapors, dust, mists & fumes Retain filter clip for reuse when replacing filters Use with 95115 and 95110 respirators Read and comply with all instructions and warnings before using Replacement Combination Cartridge Filters for Reusable Respirators Organic vapor cartridge, filter clips and R95 filter in one easy to change unit Read and comply with all instructions and warnings before using.
11.99
Price: 11.99
|
|
|
| Marshalltown SW215 SkyWalker 2.0 15-23 Inch Drywall Stilts | Marshalltown ST18 SkyWalker 1.0 18-30 Inch Drywall Stilts |
 Walk tall with confidence in the Marshalltown SW215 SkyWalker Drywall Stilts. The advanced adjustable ankle movement lets you walk more naturally and comfortably, making it an outstanding choice for beginners and seasoned professionals. The addition of the cushioned calf pad allows you to work for longer periods of time without tiring. While these SW215 SkyWalker Stilts are designed specifically for work with drywall, you cant put a limit on the variety of uses that these stilts have. They are among the best for drywall work, but they are also great for electrical work, painting, siding, or any other general repair that is just out of reach. Many people find them to be easier to maneuver than ladders for jobs at varying heights.Walk tall with confidence in the Marshalltown SW215 SkyWalker Drywall Stilts. The advanced adjustable ankle movement lets you walk more naturally and comfortably, making it an outstanding choice for beginners and seasoned professionals. The addition of the cushioned calf pad allows you to work for longer periods of time without tiring. While these SW215 SkyWalker Stilts are designed specifically for work with drywall, you cant put a limit on the variety of uses that these stilts have. They are among the best for drywall work, but they are also great for electrical work, painting, siding, or any other general repair that is just out of reach. Many people find them to be easier to maneuver than ladders for jobs at varying heights.
259.99
Price: 259.99
|
 Make working on stilts an enjoyable experience with the Marshalltown ST18 SkyWalker Drywall Stilts. They have an adjustable heel plate which will make for a more comfortable fit and a more natural walk, easing back pain and muscle strain. The addition of the padded calf pad allows you to work for longer periods of time without tiring. While these ST18 SkyWalker Stilts are designed specifically for work with drywall, you cant put a limit on the variety of uses that these stilts have. They are among the best for drywall work, but they are also great for electrical work, painting, siding, or any other general repair that is just out of reach. Many people find them to be easier to manuever than ladders for jobs at varying heights.Make working on stilts an enjoyable experience with the Marshalltown ST18 SkyWalker Drywall Stilts. They have an adjustable heel plate which will make for a more comfortable fit and a more natural walk, easing back pain and muscle strain. The addition of the padded calf pad allows you to work for longer periods of time without tiring. While these ST18 SkyWalker Stilts are designed specifically for work with drywall, you cant put a limit on the variety of uses that these stilts have. They are among the best for drywall work, but they are also great for electrical work, painting, siding, or any other general repair that is just out of reach. Many people find them to be easier to manuever than ladders for jobs at varying heights.
179.99
Price: 179.99
|
|
|
| Marshalltown VS792 9-1/4Inch x 3-1/4Inch Drywall Vacuum Sander Kit with 6-Foot Hose | Marshalltown ST24 SkyWalker 1.0 24-40 Inch Drywall Stilts |
 The Marshalltown VS792 Drywall Vacuum Sander Kit helps you keep your sanding free of dust. The VS792 comes with an adapter that allows the included hose to be used with most shop vacs. It also has a pivoting elbow that will keep the hose out of your way during use. With the adjustable vent you have control over the force of the vacuum. The VS792 Drywall Vacuum Sander is easy and comfortable to use because of its ergonomic DuraSoft handle. This Vacuum Sander is designed to work with standard sanding pads, one of which is included so you can get started right away.The Marshalltown VS792 Drywall Vacuum Sander Kit helps you keep your sanding free of dust. The VS792 comes with an adapter that allows the included hose to be used with most shop vacs. It also has a pivoting elbow that will keep the hose out of your way during use. With the adjustable vent you have control over the force of the vacuum. The VS792 Drywall Vacuum Sander is easy and comfortable to use because of its ergonomic DuraSoft handle. This Vacuum Sander is designed to work with standard sanding pads, one of which is included so you can get started right away.
29.99
Price: 29.99
|
 Make working on stilts an enjoyable experience with the Marshalltown ST24 SkyWalker Drywall Stilts. They have an adjustable heel plate which will make for a more comfortable fit and a more natural walk, easing back pain and muscle strain. The addition of the padded calf pad allows you to work for longer periods of time without tiring. While these ST24 SkyWalker Stilts are designed specifically for work with drywall, you cant put a limit on the variety of uses that these stilts have. They are among the best for drywall work, but they are also great for electrical work, painting, siding, or any other general repair that is just out of reach. Many people find them to be easier to manuever than ladders for jobs at varying heights.Make working on stilts an enjoyable experience with the Marshalltown ST24 SkyWalker Drywall Stilts. They have an adjustable heel plate which will make for a more comfortable fit and a more natural walk, easing back pain and muscle strain. The addition of the padded calf pad allows you to work for longer periods of time without tiring. While these ST24 SkyWalker Stilts are designed specifically for work with drywall, you cant put a limit on the variety of uses that these stilts have. They are among the best for drywall work, but they are also great for electrical work, painting, siding, or any other general repair that is just out of reach. Many people find them to be easier to manuever than ladders for jobs at varying heights.
179.99
Price: 179.99
|
|
|
| Paslode 402500 Rechargeable 6-Volt Battery for Impulse Cordless Staplers | Magswitch 8110015 Universal 20mm Featherboard |
 The Paslode 402500 is a replacement battery for the Paslode 900078NT IM200-S16 16-Gauge Cordless Standard Crown Stapler. With the 402500 Impulse Battery you have the power to drive up to 4,000 staples in a single charge. Keep a few on hand to minimize downtime and increase productivity. Attention International Customers Paslode products cannot be shipped outside of the USA.The Paslode 402500 is a replacement battery for the Paslode 900078NT IM200-S16 16-Gauge Cordless Standard Crown Stapler. With the 402500 Impulse Battery you have the power to drive up to 4,000 staples in a single charge. Keep a few on hand to minimize downtime and increase productivity. Attention International Customers Paslode products cannot be shipped outside of the USA.
59.99
Price: 59.99
|
 With the Magswitch 8110015 Universal 20mm Featherboard there is no miter slot limitation! The Magswitch magnets on the 8110015 work on all small, ferrous surface tables including table saws, band saws, planers and joiners. The 8110015 Universal Featherboard is perfect for in-feed/out-feed or left/right applications.With the Magswitch 8110015 Universal 20mm Featherboard there is no miter slot limitation! The Magswitch magnets on the 8110015 work on all small, ferrous surface tables including table saws, band saws, planers and joiners. The 8110015 Universal Featherboard is perfect for in-feed/out-feed or left/right applications.
46.99
Price: 46.99
|
|
|
| Stanley 10-788 Instant Change Retractable Knife | Stanley 33-740 40 Foot FatMax Tape |
 The Stanley 10-788 is an instant change retractable knife. This contractor grade utility knife features strong, durable construction that combines a cast-metal core with bi-material soft panels for a sure grip. The blade can be changed with the push of a button, with no tools required. A curved handle design offers users comfort, control and balance, while the swing-out blade storage offers easy blade access. An integrated string cutter and retractable slide, a large hang hole for pegboard storage, and a padded thumb rest top off the features of this heavy-duty utility knife. Swing-out blade storage offers easy blade access.The Stanley 10-788 is an instant change retractable knife. This contractor grade utility knife features strong, durable construction that combines a cast-metal core with bi-material soft panels for a sure grip. The blade can be changed with the push of a button, with no tools required. A curved handle design offers users comfort, control and balance, while the swing-out blade storage offers easy blade access. An integrated string cutter and retractable slide, a large hang hole for pegboard storage, and a padded thumb rest top off the features of this heavy-duty utility knife. Swing-out blade storage offers easy blade access.
8.99
Price: 8.99
|
 The Stanley 33740 is 40 FatMax Tape. The worlds longest self-retracting tape rule Gives the professional the length of a long tape with the versatility of a spring retractable hand tape 11' tape standout 1-1/4" wide blade for easy readability. BladeArmor coating on the first 6in. maximizes durability of hook end. The FatMax retractable tape measure makes measuring extended lengths of today's engineered building materials a cinch. Top-forward blade lock makes locking and unlocking a cinch. With a wider design than regular normal tape rules, the FatMax tape rule has an 11 foot stand out with a 1.25 in. blade. With a high-visibility mylar polyester film to extend the life of entire blade and improve measurement visibility.The Stanley 33740 is 40 FatMax Tape. The worlds longest self-retracting tape rule Gives the professional the length of a long tape with the versatility of a spring retractable hand tape 11' tape standout 1-1/4" wide blade for easy readability. BladeArmor coating on the first 6in. maximizes durability of hook end. The FatMax retractable tape measure makes measuring extended lengths of today's engineered building materials a cinch. Top-forward blade lock makes locking and unlocking a cinch. With a wider design than regular normal tape rules, the FatMax tape rule has an 11 foot stand out with a 1.25 in. blade. With a high-visibility mylar polyester film to extend the life of entire blade and improve measurement visibility.
34.90
Price: 34.90
|
|
|
| Stanley 62-552 FatMax 1/4-Inch Flat Stubby Screwdriver | Fastcap 3-H MAG Magnetic Laser Mount |
 The Stanley 62552 1/4 FatMax Flat Stubby Screwdriver. Ergonomically designed tri-lobular handle design provides maximum tip torque. The slip-resistant rubber grip increases user comfort. High strength nylon handle core over-molded onto bar for more torque handling and impact resistance. The precision machined and sand blasted tip grips faster securely and resists slip out. Color dot on handle end helps identify tip. The lacquer coated bar resists rust.The Stanley 62552 1/4 FatMax Flat Stubby Screwdriver. Ergonomically designed tri-lobular handle design provides maximum tip torque. The slip-resistant rubber grip increases user comfort. High strength nylon handle core over-molded onto bar for more torque handling and impact resistance. The precision machined and sand blasted tip grips faster securely and resists slip out. Color dot on handle end helps identify tip. The lacquer coated bar resists rust.
2.99
Price: 2.99
|
 The Fastcap 3-H MAG is a Magnetic Laser Mount which utilizes powerful neodymium magnets to securely attach your laser to the 3rd Hand. The laserline becomes the actual line you work from, eliminating the need for chalk lines. In seconds the LaserMount can easily position any laser exactly where you want it.The Fastcap 3-H MAG is a Magnetic Laser Mount which utilizes powerful neodymium magnets to securely attach your laser to the 3rd Hand. The laserline becomes the actual line you work from, eliminating the need for chalk lines. In seconds the LaserMount can easily position any laser exactly where you want it.
19.99
Price: 19.99
|
|
|
| DeWalt DW2163HEX 37 Piece Screwdriving Set In Case | DeWalt DC9319 7.2 to 18-Volt NiCd/NiMH/Li-Ion Vehicle Charger |
 The DeWalt DW2163HEX is a 37 Piece Screwdriving Set with a case. Heat-treated and durable to withstand abuse, these hard bits provide higher torque and better driving power. The specially designed tips help minimize the hassle of stripping. Plus, it includes a compact magnetic drive guide, which helps minimize wobbling and slipping while driving. The DeWalt DW2163HEX is a 37 Piece Screwdriving Set with a case. Heat-treated and durable to withstand abuse, these hard bits provide higher torque and better driving power. The specially designed tips help minimize the hassle of stripping. Plus, it includes a compact magnetic drive guide, which helps minimize wobbling and slipping while driving.
12.99
Price: 12.99
|
 The DeWalt DC9319 is a 7.2 to 18-Volt NiCd/NiMH/Li-Ion Vehicle Charger . Eliminate downtime with the ability to charge batteries in your vehicle while driving to work or on a jobsite. This heavy-duty vehicle charger is compatible with 7.2V-18V NiCd/NiMH/Li-Ion and will charge the batteries in 1 hour or less. The automatic shut-off protects excessive discharge of the vehicle's battery as well. The DeWalt DC9319 is a 7.2 to 18-Volt NiCd/NiMH/Li-Ion Vehicle Charger . Eliminate downtime with the ability to charge batteries in your vehicle while driving to work or on a jobsite. This heavy-duty vehicle charger is compatible with 7.2V-18V NiCd/NiMH/Li-Ion and will charge the batteries in 1 hour or less. The automatic shut-off protects excessive discharge of the vehicle's battery as well.
109.99
Price: 109.99
|
|
|
| Grip 50107 14 Gauge Electric Shears | Grip 21200 6Inch Suction Cup Dent Puller |
 The Grip 50107 is a 14 Gauge Electric Shear. It is used to cut straight, round or curved lines in sheet metal as thick as 14 gauges. The high speed steel blades provide clean and accurate cuts. It has heavy-duty metal and plastic housing.The Grip 50107 is a 14 Gauge Electric Shear. It is used to cut straight, round or curved lines in sheet metal as thick as 14 gauges. The high speed steel blades provide clean and accurate cuts. It has heavy-duty metal and plastic housing.
63.99
Price: 63.99
|
 Easily pops dented hoods, doors, and fenders into place. Also works great as a glass holder/lifter. Left edge to release suction 6" in diameter with a handle and support plates for strong pulling power Easily pops dented hoods, doors, and fenders into place. Also works great as a glass holder/lifter. Left edge to release suction 6" in diameter with a handle and support plates for strong pulling power
3.99
Price: 3.99
|
|
|
| Grip 29060 6Inch Dual Action Sanding Pad | Grip 30050 4-Piece Professional 8Inch Steel File Set |
 Professional quality 10,000 max. RPM 6 x 5/16 x 24 threads Professional quality 10,000 max. RPM 6 x 5/16 x 24 threads
3.99
Price: 3.99
|
 Heat treated, mad eof high quality alloy steel Large square handles Includes 1 each round, half round, square, and flat files in plastic storage tray Heat treated, mad eof high quality alloy steel Large square handles Includes 1 each round, half round, square, and flat files in plastic storage tray
8.99
Price: 8.99
|
|
|
| Grip 30290 Leather Belt Working Tool Bag | Grip 30432 5 - Piece Mini Carving Chisel Set |
 The Grip 30290 Leather Belt Working Tool Bag is a fine accessory for any handyman, it boasts ballistic nylon construction and is double stitched with reinforced rivets. Along with rip-proof belt loops, it features formed pockets for detached storage and includes nail bags, a hammer holder and tool storage.The Grip 30290 Leather Belt Working Tool Bag is a fine accessory for any handyman, it boasts ballistic nylon construction and is double stitched with reinforced rivets. Along with rip-proof belt loops, it features formed pockets for detached storage and includes nail bags, a hammer holder and tool storage.
27.70
Price: 27.70
|
 For woodworkingLarge, easy to grip wooden handlesIncludes 3/8 chisel, 1/2 screw chisel, 1/4 gauge, 3/16 veiner, and 3/16 v-parting chiselFor woodworkingLarge, easy to grip wooden handlesIncludes 3/8 chisel, 1/2 screw chisel, 1/4 gauge, 3/16 veiner, and 3/16 v-parting chisel
5.99
Price: 5.99
|
|
|
| Grip 35133 8Pc Double Carbide Rotary Burr Set | Grip 37252 5 LED Blinking Head Light |
 -Ideal for use in deburring steel, cast iron, and other ferrous metal parts.-Precision grounded for vibration free operation.-Heat treated for long durable use.-Ideal for use in deburring steel, cast iron, and other ferrous metal parts.-Precision grounded for vibration free operation.-Heat treated for long durable use.
27.99
Price: 27.99
|
 The Grip 37252 is a 5 LED Blinking Head Light. It is designed to increase visibility and increase safety while walking and biking. The adjustable head bands fit over any biking helmet.The Grip 37252 is a 5 LED Blinking Head Light. It is designed to increase visibility and increase safety while walking and biking. The adjustable head bands fit over any biking helmet.
9.99
Price: 9.99
|
|
|
| Grip 42025 4pc Professional Hacksaw Kit | Grip 46093 O-Ring & Seal Pick Hook Set |
 The kit includes the hacksaw itself, four 6 inch blades and the miter box.Comforatable handle design features quick change knob for fast blade changes.The kit includes the hacksaw itself, four 6 inch blades and the miter box.Comforatable handle design features quick change knob for fast blade changes.
8.99
Price: 8.99
|
For use in a variety of applications that can include marking metal, punching holes and working with O rings, gaskets, washers and other small parts.Each tool in the set also features a patented 2-composite handle with a capped end for solid striking.For use in a variety of applications that can include marking metal, punching holes and working with O rings, gaskets, washers and other small parts.Each tool in the set also features a patented 2-composite handle with a capped end for solid striking.
2.99
Price: 2.99
|
|
|
| Grip 50095 4-1/2Inch Angle Grinder Kit | Grip 55166 34-Piece Hose Clamp (Worm Clamp) Assortment Kit |
 Left or right side handle Safety on/off switch 120 volts, 60 Hz. 10,000 RPM. UL listed Includes Grinder, 4-1/2 x 5/8 wire wheel brush, 4-1/2 x 7/8 cut off wheel, 4-1/2 x 7/8 grinding wheel, 4-1/2 x 5/8 backing pad, 40 grit sanding disc, 60 grit sanding disc, 80 grit sanding disc, and (2) 100 grit sanding discs Left or right side handle Safety on/off switch 120 volts, 60 Hz. 10,000 RPM. UL listed Includes Grinder, 4-1/2 x 5/8 wire wheel brush, 4-1/2 x 7/8 cut off wheel, 4-1/2 x 7/8 grinding wheel, 4-1/2 x 5/8 backing pad, 40 grit sanding disc, 60 grit sanding disc, 80 grit sanding disc, and (2) 100 grit sanding discs
29.99
Price: 29.99
|
 Worm clamp gear type clamps Zinc plated Use for securing hoses around pipes - great for securing hoses in automotive applications Includes (2) 2-3/4, (6) 1-3/4, (2) 2-1/2, (6) 1-1/2, (4) 2-1/4, (6) 1-1/4, (4) 2, and (4) 1-16 diameter clamps Worm clamp gear type clamps Zinc plated Use for securing hoses around pipes - great for securing hoses in automotive applications Includes (2) 2-3/4, (6) 1-3/4, (2) 2-1/2, (6) 1-1/2, (4) 2-1/4, (6) 1-1/4, (4) 2, and (4) 1-16 diameter clamps
6.99
Price: 6.99
|
|
|
| Grip 61052 Large Capacity Hand Riveter | Grip 64394 1/4Inch x 6Inch Flathead Professional Screwdriver |
 Extra long handles with comfort grip Includes nozzles for 1/8, 3/16, 3/32, and 1/4 rivets Includes Riveter, (4) nozzles, (25) 1/8 rivets, (25) 3/16 rivets, (25) 3/32 rivets, and (25) 1/4 rivets Extra long handles with comfort grip Includes nozzles for 1/8, 3/16, 3/32, and 1/4 rivets Includes Riveter, (4) nozzles, (25) 1/8 rivets, (25) 3/16 rivets, (25) 3/32 rivets, and (25) 1/4 rivets
23.99
Price: 23.99
|
 -Heat treated chrome vanadium steel blades -Heat treated chrome vanadium steel blades
3.99
Price: 3.99
|
|
|
| Grip 77142 100' x 1/2Inch Open Reel Tape Measure | Grip 93102 18 inch Offset Pipe Wrench |
 For large measuring jobs that require more length that a traditional tape measure can offer 100 ft. long tape, 1/2 tape width For large measuring jobs that require more length that a traditional tape measure can offer 100 ft. long tape, 1/2 tape width
5.99
Price: 5.99
|
 The Grip 93102 is an 18 inch Offset Pipe Wrench. The drop forged, heat treated angled wrench gets at those hard to reach pipes.The Grip 93102 is an 18 inch Offset Pipe Wrench. The drop forged, heat treated angled wrench gets at those hard to reach pipes.
11.99
Price: 11.99
|
|
|
| Milwaukee 49-56-0132 2-1/4 Inch Ice Hardened Hole Saw | Milwaukee 6310-20 18-Volt Cordless 6-1/2-Inch Circular Saw |
 The Milwaukee 49-56-0132 is a 2-1/4 Inch Ice Hardened Hole Saw. Ice Hardened trade hole saws are made form a cryogenic hardening process rather than heat to create a more durable and longer lasting hole saw.The Milwaukee 49-56-0132 is a 2-1/4 Inch Ice Hardened Hole Saw. Ice Hardened trade hole saws are made form a cryogenic hardening process rather than heat to create a more durable and longer lasting hole saw.
13.99
Price: 13.99
|
 The 6310-20 Milwaukee 18 Volt Cordless Circular Saw operates on a 2.4 amp hour nickel-cadmium battery providing the most 2 x 4 cuts per battery charge in the industry. On a single charge, the Milwaukee Cordless Circular Saw can cut up to 145 2 x 4s or 106 feet of 5/8 inch OSB material. Milwaukee uses only no memory effect batteries, always providing the user with full battery capacity. This 6-1/2 inch saw includes an electric brake which stops the blade in seconds. The Cordless Circular Saw can bevel up to 50 degrees for cutting extreme angles. The saw features all-metal upper and lower guards and a rigid aluminum shoe for rigorous jobsite use. A soft grip handle results in a more comfortable gripping surface. Batteries are interchangeable with other Milwaukee 18 volt tools adding versatility.The 6310-20 Milwaukee 18 Volt Cordless Circular Saw operates on a 2.4 amp hour nickel-cadmium battery providing the most 2 x 4 cuts per battery charge in the industry. On a single charge, the Milwaukee Cordless Circular Saw can cut up to 145 2 x 4s or 106 feet of 5/8 inch OSB material. Milwaukee uses only no memory effect batteries, always providing the user with full battery capacity. This 6-1/2 inch saw includes an electric brake which stops the blade in seconds. The Cordless Circular Saw can bevel up to 50 degrees for cutting extreme angles. The saw features all-metal upper and lower guards and a rigid aluminum shoe for rigorous jobsite use. A soft grip handle results in a more comfortable gripping surface. Batteries are interchangeable with other Milwaukee 18 volt tools adding versatility.
59.99
Price: 59.99
|
|
|
| Milwaukee 48-28-4001 5 -1/2 Inch Bit Extension | Ernst� 3/8Inch Socket Clips - 15 Pack |
 The Milwaukee 48-28-4001 as a 5-1/2 Inch bit extension for self-feed bits, auger bits and hole saws (1 inch diameter and larger).The Milwaukee 48-28-4001 as a 5-1/2 Inch bit extension for self-feed bits, auger bits and hole saws (1 inch diameter and larger).
14.99
Price: 14.99
|
 3/8 clips with (96) I.D stickers Grips organizer sides for firm incremental positioning Durable long life grip Great additional functionality Tools Not Included3/8 clips with (96) I.D stickers Grips organizer sides for firm incremental positioning Durable long life grip Great additional functionality Tools Not Included
2.99
Price: 2.99
|
|
|
| Acme A680-TK01 Typhoon Adapter/Tip Kit | Porter-Cable 4212 12 inches Deluxe Dovetail Jig |
 The Acme A680-TK01 is a Typhoon Adapter/Tip Kit which includes the A680-ADP Blow Gun Adapter. This adapter allows our popular Typhoon Blow Gun to employ any of the wide array of standard Acme Blow Gun Replacement tips, Needle Blow Gun Tips, and Safety Extensions originally designed for use with our A633A636, A637, and A671 Series Blow Guns. This kit also includes 3 different needle tips, one rubber safety tip and one standard rubber tip.The Acme A680-TK01 is a Typhoon Adapter/Tip Kit which includes the A680-ADP Blow Gun Adapter. This adapter allows our popular Typhoon Blow Gun to employ any of the wide array of standard Acme Blow Gun Replacement tips, Needle Blow Gun Tips, and Safety Extensions originally designed for use with our A633A636, A637, and A671 Series Blow Guns. This kit also includes 3 different needle tips, one rubber safety tip and one standard rubber tip.
19.99
Price: 19.99
|
 The Porter-Cable 4212 is a 12 inches Deluxe Dovetail Jig. It is a heavy-duty and easy-to-use dovetail jig. A 1/8 inches thick steel base along with CNC machined aluminum templates give the jig the strength and precision. Patented wood alignment lines along with a patented router bit depth stop make setup a breeze. The 4212 will cut through dovetails, box joints, half-blind dovetails, rabbeted half-blind dovetails and dovetail dadoes (sliding dovetails).The Porter-Cable 4212 is a 12 inches Deluxe Dovetail Jig. It is a heavy-duty and easy-to-use dovetail jig. A 1/8 inches thick steel base along with CNC machined aluminum templates give the jig the strength and precision. Patented wood alignment lines along with a patented router bit depth stop make setup a breeze. The 4212 will cut through dovetails, box joints, half-blind dovetails, rabbeted half-blind dovetails and dovetail dadoes (sliding dovetails).
169.00
Price: 169.00
|
|
|
| Porter-Cable PIN100 23-Gauge Pin Nailer Kit, 60-100 PSI | Porter-Cable PIN23075 23 Gauge 3/4 inches Pin Nails (2000 Pack) |
 The Porter-Cable PIN100 is a 23 Gauge Pin Nailer Kit. The hole produced with the pin is so small that a wipe with a damp rag makes the hole virtually invisible to the naked eye. The unit is small and lightweight but does not lack in performance or features. The PIN100 can shoot all 23 Gauge pin nails from 1/2 inches to 1 inch in length. It features an automatic magazine adjustment to accommodate the length of pin. All other pinners have a manual adjustment that takes time to adjust each time a different length of pin is used. The bottom load magazine holds 170 pins and provides a visual signal when the magazine is getting low on pins. The handle utilizes a rubber grip for comfort and better control and the rear exhaust directs the blow away from the user.The Porter-Cable PIN100 is a 23 Gauge Pin Nailer Kit. The hole produced with the pin is so small that a wipe with a damp rag makes the hole virtually invisible to the naked eye. The unit is small and lightweight but does not lack in performance or features. The PIN100 can shoot all 23 Gauge pin nails from 1/2 inches to 1 inch in length. It features an automatic magazine adjustment to accommodate the length of pin. All other pinners have a manual adjustment that takes time to adjust each time a different length of pin is used. The bottom load magazine holds 170 pins and provides a visual signal when the magazine is getting low on pins. The handle utilizes a rubber grip for comfort and better control and the rear exhaust directs the blow away from the user.
109.99
Price: 109.99
|
 3/4 inches long23 gauge pin nailsPackage of 2000Dual trigger feature 3/4 inches long23 gauge pin nailsPackage of 2000Dual trigger feature
5.99
Price: 5.99
|
|
|
| Delta 20-619 6 inch Quick Release Drill Press Vise (1 inch X 6 inch Jaw with 6 inch Opening) | Delta 31-423 12 inch 120 Grit PSA Fine Abrasive Disc |
 The Delta 20-619 is a Drill Press Vise that holds material up to 6 inch wide and comes with a quick-release feature that saves time. The Delta 20-619 is a Drill Press Vise that holds material up to 6 inch wide and comes with a quick-release feature that saves time.
41.99
Price: 41.99
|
 The Delta 31-423 is a 12 inch 120 Grit PSA Fine Abrasive Disc. The aluminum oxide sandpaper disc fits the Delta 31-120, 31-280 and 31-730 sanders and any other sander requiring a 12 adhesive-backed disc. The 120 grit helps in aggressive stock removal while sanding. The Aluminum oxide abrasive disc performs efficient sanding and lasts longer than other abrasive disc. The Delta 31-423 is a 12 inch 120 Grit PSA Fine Abrasive Disc. The aluminum oxide sandpaper disc fits the Delta 31-120, 31-280 and 31-730 sanders and any other sander requiring a 12 adhesive-backed disc. The 120 grit helps in aggressive stock removal while sanding. The Aluminum oxide abrasive disc performs efficient sanding and lasts longer than other abrasive disc.
11.99
Price: 11.99
|
|
|
| Delta 31-789 1/2 inch x 4-1/2 inch, 120 Grit Abrasive Sleeves for SA350/K OS Sander (6-Pack) | Delta 31-797 1 inch x 4-1/2 inch, 120 Grit Abrasive Sleeves for SA350/K OS Sander (6-Pack) |
 The Delta 31-789 is an Aluminum oxide abrasive sleeve for sandpaper. It has small 1/2 inch diameter for sanding smaller contours and curves. These sanding sleeves fit the Delta 31-780 Bench oscillating spindle sander. The Delta 31-789 is an Aluminum oxide abrasive sleeve for sandpaper. It has small 1/2 inch diameter for sanding smaller contours and curves. These sanding sleeves fit the Delta 31-780 Bench oscillating spindle sander.
13.99
Price: 13.99
|
 The Delta 31-797 is an Aluminum oxide abrasive sleeve for sandpaper. It has small 1 inch diameter for sanding smaller contours and curves. These sanding sleeves fit the Delta 31-780 Bench oscillating spindle sander. The Delta 31-797 is an Aluminum oxide abrasive sleeve for sandpaper. It has small 1 inch diameter for sanding smaller contours and curves. These sanding sleeves fit the Delta 31-780 Bench oscillating spindle sander.
16.99
Price: 16.99
|
|
|
| |
|
|
