|
| |
|
| Performax 60-6080 80 Grit Ready-to-Wrap Abrasive Strips (Pack of 4) | Chicago Pneumatic CP778 5Inch Heavy-Duty Hi-Speed Sander, 14000 RPM, 10.5 CFM |
 The Performax 60-6080 is a pack of 4, 80 Grit Ready-to-Wrap Abrasive Strips. The Ready-to-Wrap Abrasive Sandpaper strips lock in place at the right angle for quick and easy grit changes. The Ready-to-Wrap sheets in the four-pack not only roll up perfectly on the sander for sanding but are also easy to change. The abrasive strips fit the 16-32 like a glove and hence last for a longer duration than other sheets. A sharp, durable aluminum oxide gives a fast and exceptionally long-lasting cut while the high-strength resin grain bonds the system together.The Performax 60-6080 is a pack of 4, 80 Grit Ready-to-Wrap Abrasive Strips. The Ready-to-Wrap Abrasive Sandpaper strips lock in place at the right angle for quick and easy grit changes. The Ready-to-Wrap sheets in the four-pack not only roll up perfectly on the sander for sanding but are also easy to change. The abrasive strips fit the 16-32 like a glove and hence last for a longer duration than other sheets. A sharp, durable aluminum oxide gives a fast and exceptionally long-lasting cut while the high-strength resin grain bonds the system together.
39.99
Price: 39.99
|
 -Built-in regulator and variable speed throttle for precise speed control-Rugged , energy efficient 1/2 HP motor-Lightweight, low vibration for easy handling-Built-in regulator and variable speed throttle for precise speed control-Rugged , energy efficient 1/2 HP motor-Lightweight, low vibration for easy handling
84.99
Price: 84.99
|
|
|
| Alltrade 835691 12-Pound 51-Inch Pinch-Point Crow Bar | Stanley 47-487L FatMax Chalk Reel with FatMax Red Chalk |
 The Alltrade 835691 51 Pinch-Point Crow Bar can be used for prying and alignment work. The 835691 is 12 lbs. for easy wielding. Its forged, heat-treated carbon steel construction ensures strength and durability along with the corrosion-resistant finish and polished bit.The Alltrade 835691 51 Pinch-Point Crow Bar can be used for prying and alignment work. The 835691 is 12 lbs. for easy wielding. Its forged, heat-treated carbon steel construction ensures strength and durability along with the corrosion-resistant finish and polished bit.
26.99
Price: 26.99
|
 The Stanley 47487L is a FatMax Chalk Reel with FatMax Red Chalk. It is 100 in length. The die case aluminum housing for superior durability. The gear ratio is about 5:1 and there is a quick gear release. It rewinds 5 times faster. The line 3 times more abrasion resistant than standard line. The Xtreme chalk is weather resistant/scuff resistant and the chalk is water proof and non-clumping. Snaps longer lasting lines even on wet and dry surfaces.The Stanley 47487L is a FatMax Chalk Reel with FatMax Red Chalk. It is 100 in length. The die case aluminum housing for superior durability. The gear ratio is about 5:1 and there is a quick gear release. It rewinds 5 times faster. The line 3 times more abrasion resistant than standard line. The Xtreme chalk is weather resistant/scuff resistant and the chalk is water proof and non-clumping. Snaps longer lasting lines even on wet and dry surfaces.
14.99
Price: 14.99
|
|
|
| Bosch 1250DEVS 6 inch Dual-Mode Variable Speed Random Orbit Sander/Polisher, 3100-6650 OPM, 6.5 Amps | Bosch PS30-2AR Reconditioned 12-Volt Max Litheon 2 Speed Drill Diver with 2 Batteries and Charger |
 The Bosch 1250DEVS is a 6 inch Dual-Mode Variable Speed Random Orbit Sander/Polisher. The sander with Turbo Action has a 6.5 Amp motor. The dual mode selector allows to quickly switch between aggressive rough sanding and fine swirl-free sanding applications. The variable speeds between 3100-6650 OPM mean quick and controlled stock removal. Constant response circuitry provides soft start and extended gear life. A Micro-cellular backing pad conforms to surfaces for fine finishes. It includes a micro-cellular backing pad, a dust tube, an auxiliary handle, sanding disc and pad wrench. Two other types of backing pads are available separately.The Bosch 1250DEVS is a 6 inch Dual-Mode Variable Speed Random Orbit Sander/Polisher. The sander with Turbo Action has a 6.5 Amp motor. The dual mode selector allows to quickly switch between aggressive rough sanding and fine swirl-free sanding applications. The variable speeds between 3100-6650 OPM mean quick and controlled stock removal. Constant response circuitry provides soft start and extended gear life. A Micro-cellular backing pad conforms to surfaces for fine finishes. It includes a micro-cellular backing pad, a dust tube, an auxiliary handle, sanding disc and pad wrench. Two other types of backing pads are available separately.
249.99
Price: 249.99
|
 The PS30-2A Reconditioned 3/8-Inch Drill/Driver is an ultra compact drill, that is small enough to fit into tight spaces and corners, yet strong enough to get the job done. With a 2 speed capability and the ability to generate 220 Inch-Pounds of torque, this drill/driver is capable of handling 90% of your drilling or driving applications.The PS30-2A Reconditioned 3/8-Inch Drill/Driver is an ultra compact drill, that is small enough to fit into tight spaces and corners, yet strong enough to get the job done. With a 2 speed capability and the ability to generate 220 Inch-Pounds of torque, this drill/driver is capable of handling 90% of your drilling or driving applications.
139.99
Price: 139.99
|
|
|
| Bosch 4405 Single-Bevel Sliding Compound Miter Saw with Electric Brake, 4700 RPM, 13.0 Amps | Bosch 18-Volt Litheon Brute Tough Hammer Drill/Driver Kit |
 The Bosch 4405 10 Compound Miter Saw is an everyday miter saw that will tackle any project. The 4405 Miter Saw has a 25 wide sliding fence and dual glide rails that give extra support for smaller and larger stock, making it easier to produce accurate bevel and miter cuts every time. With a dozen positive stops and an electric brake to reduce blade spin down time, you can get your cuts done in record time.The Bosch 4405 10 Compound Miter Saw is an everyday miter saw that will tackle any project. The 4405 Miter Saw has a 25 wide sliding fence and dual glide rails that give extra support for smaller and larger stock, making it easier to produce accurate bevel and miter cuts every time. With a dozen positive stops and an electric brake to reduce blade spin down time, you can get your cuts done in record time.
449.99
Price: 449.99
|
 High torque mode produces over 650 in.-lbs.High speed mode produces 2,050 RPM, up to 30,750 BPMDurashield Housing & unibody powertrain provide optimum reinforcement to withstand real world conditionsBosch Litheon Batteries - State-of-the-art Lithium-ion battery technology coupled with Bosch's proprietary ECP (Electronic Cell Protection) system guarantees the optimal performance of tool and batteries even for tough work conditionsBosch Litheon Batteries - Designed for maximum cyclelife, minimum self-discharge and not memory effect1/2" Metal Chuck for increased durabilityHigh Strength Metal Collar enhances tool durability and protection when dropped on the chuckNewly Designed Powertrain and Gears increase tool life and durabilityLED Light is great for dark or enclosed areasErgonomic two-tone soft grip handle - For extended comfort and control25 Position ClutchVariable speed trigger for complete controlHigh torque mode produces over 650 in.-lbs.High speed mode produces 2,050 RPM, up to 30,750 BPMDurashield Housing & unibody powertrain provide optimum reinforcement to withstand real world conditionsBosch Litheon Batteries - State-of-the-art Lithium-ion battery technology coupled with Bosch's proprietary ECP (Electronic Cell Protection) system guarantees the optimal performance of tool and batteries even for tough work conditionsBosch Litheon Batteries - Designed for maximum cyclelife, minimum self-discharge and not memory effect1/2" Metal Chuck for increased durabilityHigh Strength Metal Collar enhances tool durability and protection when dropped on the chuckNewly Designed Powertrain and Gears increase tool life and durabilityLED Light is great for dark or enclosed areasErgonomic two-tone soft grip handle - For extended comfort and control25 Position ClutchVariable speed trigger for complete control
299.99
Price: 299.99
|
|
|
| Bosch HS1911 SDS-Max Shank 1 inch x 12 inch Flat Chisel | DeWalt DC330KR Factory Reconditioned DC330K Heavy-Duty XRP 18-Volt Cordless Jig Saw Kit |
 The Bosch HS1911 is a SDS-Max Shank 1 inch x 12 inch Flat Chisel. Boschs R-Tec reflection point is featured on HS1903 and HS1904. When energy is dispersed with each beat of the hammer, the new R-Tec point reflects the hammers energy back into the work material, increasing the rate of removal by 15%. The result is faster demolition which increases overall jobsite productivity and profitability.The Bosch HS1911 is a SDS-Max Shank 1 inch x 12 inch Flat Chisel. Boschs R-Tec reflection point is featured on HS1903 and HS1904. When energy is dispersed with each beat of the hammer, the new R-Tec point reflects the hammers energy back into the work material, increasing the rate of removal by 15%. The result is faster demolition which increases overall jobsite productivity and profitability.
13.99
Price: 13.99
|
 The DeWalt DC330K is a factory reconditioned heavy-duty XRP 18V Cordless Jig Saw Kit. It consists of all metal keyless blade change system that accepts universal and t-shank blades. The tool free adjustable shoe slides forward, backward and bevels 45-1/4 in both directions. 3-position orbital action. Unique counter-balance mechanism. Variable speed trigger 0-2000 SPM for greater control and faster cutting. Dust blower keeps line of cut clear of chips. The DeWalt DC330K is a factory reconditioned heavy-duty XRP 18V Cordless Jig Saw Kit. It consists of all metal keyless blade change system that accepts universal and t-shank blades. The tool free adjustable shoe slides forward, backward and bevels 45-1/4 in both directions. 3-position orbital action. Unique counter-balance mechanism. Variable speed trigger 0-2000 SPM for greater control and faster cutting. Dust blower keeps line of cut clear of chips.
151.19
Price: 151.19
|
|
|
| DeWalt DW3128P5 12-Inch 80 Tooth Thin Kerf Miter Saw Blades Combo Pack | Black & Decker 70-162 6Inch Coarse Wire Wheel Brush |
 The DeWalt DW3128P5 is a Combo 12" 80-Tooth Carbide Tile Saw Blades. Ideal for all cutting applications in softwood, hardwood, chip board, or plywood using a table saw or miter saw. Professional quality thin kerf carbide saw blades produce a smooth finish with minimal material waste. Computer balanced plate reduces vibration for improved accuracy. The DeWalt DW3128P5 is a Combo 12" 80-Tooth Carbide Tile Saw Blades. Ideal for all cutting applications in softwood, hardwood, chip board, or plywood using a table saw or miter saw. Professional quality thin kerf carbide saw blades produce a smooth finish with minimal material waste. Computer balanced plate reduces vibration for improved accuracy.
44.99
Price: 44.99
|
 Provides fast removal of rust, paint and scale on wood, metal and plastic 1/2" shank, 4500 max. RPM 6" diameter, coarseProvides fast removal of rust, paint and scale on wood, metal and plastic 1/2" shank, 4500 max. RPM 6" diameter, coarse
6.99
Price: 6.99
|
|
|
| Grip 55274 Self-Priming Transfer (Siphon) Pump | Ernst 5090 12-Slot Screwdriver Tray |
 Quickly and easily manually transfers all types of liquid including gas and oil Great for the shop, farm, or home Includes Pump, liquid intake hose, liquid discharge hose, inlet nozzle, (2) hose connectors, air pressue hose, and outlet nozzle Quickly and easily manually transfers all types of liquid including gas and oil Great for the shop, farm, or home Includes Pump, liquid intake hose, liquid discharge hose, inlet nozzle, (2) hose connectors, air pressue hose, and outlet nozzle
7.99
Price: 7.99
|
 12 slot screwdriver storage tray12 slot screwdriver storage tray
4.99
Price: 4.99
|
|
|
| Ernst� 18-Inch Socket Rail with 15 Socket Clips - 1/4-Inch Red | Ernst� 1/2Inch Socket Clips - 15 Pack |
 1/4 width, 18 length Twin serrated edges for maximum socket storage and accessory mounting Slotted hang hole allows vertical hanging for convenient storage Rounded head for easy socket engagement, smooth spring action for consistent feel and durable, long life socket grip Secured incremental positioning of clips and accessories - includes (96) I.D stickers Tools Not Included1/4 width, 18 length Twin serrated edges for maximum socket storage and accessory mounting Slotted hang hole allows vertical hanging for convenient storage Rounded head for easy socket engagement, smooth spring action for consistent feel and durable, long life socket grip Secured incremental positioning of clips and accessories - includes (96) I.D stickers Tools Not Included
6.99
Price: 6.99
|
 1/2 clips with (96) I.D stickers Grips organizer sides for firm incremental positioning Durable long life grip Great additional functionality Tools Not Included1/2 clips with (96) I.D stickers Grips organizer sides for firm incremental positioning Durable long life grip Great additional functionality Tools Not Included
2.99
Price: 2.99
|
|
|
| Flexeel AMXFD50-937 Max 3/8-Inch (Inner Diameter) x 50-Foot Hose with Quick Connect Ends | Acme� A750DD25 1/4Inch X 25' Flexeel Reinforced Polyurethane Hose |
 The Acme AMXFD50-937 is a FlexEel Max 3/8-Inch x 50-Foot Hose with Quick Connect Ends. Flexeel Max Reinforced Polyurethane Air Hoses are the most lightweight, most durable, and most flexible. It will still stay ultra-flexible down to temperatures as low as -40 F, and maintain durability up to 165F!The Acme AMXFD50-937 is a FlexEel Max 3/8-Inch x 50-Foot Hose with Quick Connect Ends. Flexeel Max Reinforced Polyurethane Air Hoses are the most lightweight, most durable, and most flexible. It will still stay ultra-flexible down to temperatures as low as -40 F, and maintain durability up to 165F!
59.99
Price: 59.99
|
 1/4 inside diameter, 25 length Offers excellent alternative to bulkier rubber hoses Lightweight and tough; ideal for outdoor road service or indoor body shop use Retains its flexibility in cold environments; -40 degree F to +165 degree, 200 psi working pressure at 70 degree F Hose color may vary 1/4 inside diameter, 25 length Offers excellent alternative to bulkier rubber hoses Lightweight and tough; ideal for outdoor road service or indoor body shop use Retains its flexibility in cold environments; -40 degree F to +165 degree, 200 psi working pressure at 70 degree F Hose color may vary
17.99
Price: 17.99
|
|
|
| Porter-Cable 343VSK 5 inches Variable-Speed Random Orbit Sander Kit, 120V, 3 Amps | Porter-Cable PCL180DK-2 18-Volt Cordless Lithium Drill/Driver Kit |
 The Porter-Cable 343VSK is a 5 inches Variable-Speed Random Orbit Sander Kit. Its top cap design allows users to service & clean out the unit without complete disassembly. It has improved ergonomics which allow for comfortable body & top gripping. It has 3.0 Amp motor for power and durability. Its 8 hole hook & loop pad accepts standard paper. The sander has a variable speed of 7000 - 12000 OPM which enables users to adjust proper pad speed for various applications. The Porter-Cable 343VSK is a 5 inches Variable-Speed Random Orbit Sander Kit. Its top cap design allows users to service & clean out the unit without complete disassembly. It has improved ergonomics which allow for comfortable body & top gripping. It has 3.0 Amp motor for power and durability. Its 8 hole hook & loop pad accepts standard paper. The sander has a variable speed of 7000 - 12000 OPM which enables users to adjust proper pad speed for various applications.
79.99
Price: 79.99
|
 The Porter-Cable PCL180DK-2 is an 18-Volt Cordless Lithium Drill/Driver Kit. Any drilling job is doable with Porter-Cable's 18 Volt Lithium Drill and Driver Kit. This compact, light-weight drill easily fits into tight spaces not accessible with larger tools. Its 2-position gear box offers flexibility for high-speed drill and driving, and low speed for high-torque applications. And with the Li-Ion batteries and fast charger, you have extended run time for long projects. The Porter-Cable PCL180DK-2 is an 18-Volt Cordless Lithium Drill/Driver Kit. Any drilling job is doable with Porter-Cable's 18 Volt Lithium Drill and Driver Kit. This compact, light-weight drill easily fits into tight spaces not accessible with larger tools. Its 2-position gear box offers flexibility for high-speed drill and driving, and low speed for high-torque applications. And with the Li-Ion batteries and fast charger, you have extended run time for long projects.
189.99
Price: 189.99
|
|
|
| Porter-Cable 6911 D-Handle Base | MK Diamond MK-100 158189 10-Inch Wet Tile Saw with Stand |
 The Porter-Cable 6911 is a D-Handle base. The D-handle base is compatible with Porter-Cable router motors # 6902 and 6912. The D-Handle base provides a comfortable grip and a trigger switch for easier operation. The Porter-Cable 6911 is a D-Handle base. The D-handle base is compatible with Porter-Cable router motors # 6902 and 6912. The D-Handle base provides a comfortable grip and a trigger switch for easier operation.
79.99
Price: 79.99
|
 The MK-100 tile saw features a powerful 115V, 1-1/2 hp GE motor for dependability. It also features a shaft lock for safe, easy blade changes. The MK-100 tile saw is built in the MK Tradition featuring durable, lightweight construction while delivering professional results. This tile saw has a cutting depth capacity of 3-1/4 inches and will rip cut a full 18-inch tile while diagonally cutting a 12-inch tile. Two position cutting head for greater versatility in cutting various tile sizes. Chrome-plated linear guide-bar system ensures precision alignment & accurate cutting. Cast-aluminum blade guard with built-in water distribution system supplies water to both sides of blade. Variable height cutting head allows for plunge cutting and use of blades smaller that 10 in diameter. Blade guard accommodates 6 and 8 profile wheels. Micro V-belt drive.The MK-100 tile saw features a powerful 115V, 1-1/2 hp GE motor for dependability. It also features a shaft lock for safe, easy blade changes. The MK-100 tile saw is built in the MK Tradition featuring durable, lightweight construction while delivering professional results. This tile saw has a cutting depth capacity of 3-1/4 inches and will rip cut a full 18-inch tile while diagonally cutting a 12-inch tile. Two position cutting head for greater versatility in cutting various tile sizes. Chrome-plated linear guide-bar system ensures precision alignment & accurate cutting. Cast-aluminum blade guard with built-in water distribution system supplies water to both sides of blade. Variable height cutting head allows for plunge cutting and use of blades smaller that 10 in diameter. Blade guard accommodates 6 and 8 profile wheels. Micro V-belt drive.
799.99
Price: 799.99
|
|
|
| MK Diamond MK-101 151991 10Inch Wet Tile Saw | MK Diamond MK-CX-3H 159345 14-Inch Wet/Dry Walk Behind Concrete Saw |
 The MK-101 Series is engineered for versatility, durability and precision cutting of tile & marble. Designed with fully enclosed fan-cooled high torque motors, zinc-plated one piece steel frame assemblies, cast aluminum support components, and many other unique features, the 101 series provides unequaled quality. The MK-101 Series is engineered for versatility, durability and precision cutting of tile & marble. Designed with fully enclosed fan-cooled high torque motors, zinc-plated one piece steel frame assemblies, cast aluminum support components, and many other unique features, the 101 series provides unequaled quality.
959.99
Price: 959.99
|
 The MK-CX-3 Series is a compact, light weight line of concrete saws engineered for maneuverability and reliability. MK-CX-3 saws can be used for wet or dry cutting and cuts can be made from both left and right sides of the saw. The MK-CX-3 Series is a compact, light weight line of concrete saws engineered for maneuverability and reliability. MK-CX-3 saws can be used for wet or dry cutting and cuts can be made from both left and right sides of the saw.
1549.99
Price: 1549.99
|
|
|
| MK Diamond MK-370EXP 159943 7Inch Wet Cutting Tile Saw | Hobart 500521A Factory Reconditioned Handler 125EZ Welder InchAInch Stock |
 MK Diamond MK-370EXP 7 Wet Cutting Tile Saw. Powerful and high torque 1-1/4HP 115V 50/60Hz motor. 5500 RPM. Tilting head allows for precise 45 miter cuts Sliding aluminum die-cast cutting table rips 18 tile Maintenance-free, self-lubricating pinion and gear-box assembly3/4 diameter chrome-plated linear guide-bar system Heavy duty on/off switch. MK-Safe switch prevents saw from being operated when locking key is removed. Built-in water pump receptacle. Removable thermoplastic water reservoir. Read more about the MK Diamond 370EXP tile saw at Toologics.com!MK Diamond MK-370EXP 7 Wet Cutting Tile Saw. Powerful and high torque 1-1/4HP 115V 50/60Hz motor. 5500 RPM. Tilting head allows for precise 45 miter cuts Sliding aluminum die-cast cutting table rips 18 tile Maintenance-free, self-lubricating pinion and gear-box assembly3/4 diameter chrome-plated linear guide-bar system Heavy duty on/off switch. MK-Safe switch prevents saw from being operated when locking key is removed. Built-in water pump receptacle. Removable thermoplastic water reservoir. Read more about the MK Diamond 370EXP tile saw at Toologics.com!
419.99
Price: 419.99
|
 -The Handler 125 EZ has Hobarts unique Single-Knob Control making it the quickest and easiest wire welder to set up and use. Just plug it into 115 VAC, select the mild steel thickness with the Single Knob Control and you are ready to weld. -The Handler 125 EZ has Hobarts unique Single-Knob Control making it the quickest and easiest wire welder to set up and use. Just plug it into 115 VAC, select the mild steel thickness with the Single Knob Control and you are ready to weld.
289.99
Price: 289.99
|
|
|
| Stabila 03170 Self-Leveling Indoor LaserBob Kit | Stabila 30030 96-Inch Padded Nylon Case |
 The Stabila 03170 is an indoor LaserBob kit with a receiver. It can level a 150 line and plumb up and down. The included base can attach to steel or tripods. Those kind of capabilities make the Stabila 03170 a go-to for framing and work with drop ceilings. This kit is great for increasing productivity and lessening headaches in indoor settings. If you would like to use this kit in outdoor settings, the RC 210 Receiver by Stabila (sold separately) can increase your visible line range to 300 feet.The Stabila 03170 is an indoor LaserBob kit with a receiver. It can level a 150 line and plumb up and down. The included base can attach to steel or tripods. Those kind of capabilities make the Stabila 03170 a go-to for framing and work with drop ceilings. This kit is great for increasing productivity and lessening headaches in indoor settings. If you would like to use this kit in outdoor settings, the RC 210 Receiver by Stabila (sold separately) can increase your visible line range to 300 feet.
350.00
Price: 350.00
|
 Stabila 30030 96-Inch case is strong, padded liner to protect level in transit. It is convenient loop for hanging on pegs and hooks. Tough high strength nylon outer shell. Heavy duty, large tooth zipper. Convenient shoulder strap for easy carrying.Stabila 30030 96-Inch case is strong, padded liner to protect level in transit. It is convenient loop for hanging on pegs and hooks. Tough high strength nylon outer shell. Heavy duty, large tooth zipper. Convenient shoulder strap for easy carrying.
29.99
Price: 29.99
|
|
|
| Stabila 33610 6-10 ft. Extendable Plate Level | Stabila 37496 96Inch Box Frame Level |
 The Stabila 33610 is a 6-10 Foot Extendable Plate Level Designed for the Residential Stick Framer that Needs Fast and Accurate Wall Installations (Plumb Plate to Plate). Box frame construction will not warp or twist. Fully sealed solid rail (six sided) extension system, eliminates deflection, extension crash, and delivers the smoothest sliding available. Metal stand-offs will not break off in cold weather.The Stabila 33610 is a 6-10 Foot Extendable Plate Level Designed for the Residential Stick Framer that Needs Fast and Accurate Wall Installations (Plumb Plate to Plate). Box frame construction will not warp or twist. Fully sealed solid rail (six sided) extension system, eliminates deflection, extension crash, and delivers the smoothest sliding available. Metal stand-offs will not break off in cold weather.
250.99
Price: 250.99
|
 Stabila 37496 96 Box Frame Level is one of the best professional levels. Rubber pad end caps and wall grips that are functional yet removable for flush measuring. This level has a wider profile which means an even stronger frame. The accuracy is certified, top and bottom readings and sports a new rubber hand grip design.Stabila 37496 96 Box Frame Level is one of the best professional levels. Rubber pad end caps and wall grips that are functional yet removable for flush measuring. This level has a wider profile which means an even stronger frame. The accuracy is certified, top and bottom readings and sports a new rubber hand grip design.
230.99
Price: 230.99
|
|
|
| Adjustable Clamp 7437 Bar Clamp Pads 8PK | Mercer 100180 1Inch X 30Inch 180 Grit Belt |
 -These soft, durable, plastic pads provide a resilient, protective cushion when clamping wood, metal and plastic surfaces. Non-mar, non-stick, non-slip pads eliminate blocks and can be adjusted and removed quickly, if desired.-These soft, durable, plastic pads provide a resilient, protective cushion when clamping wood, metal and plastic surfaces. Non-mar, non-stick, non-slip pads eliminate blocks and can be adjusted and removed quickly, if desired.
3.99
Price: 3.99
|
 -Aluminum Oxide grain-Resin on resin bond-Butt-tape joint for bi-directional sanding-X-weight cloth backing-Unique open/closed coat design-Aluminum Oxide grain-Resin on resin bond-Butt-tape joint for bi-directional sanding-X-weight cloth backing-Unique open/closed coat design
1.39
Price: 1.39
|
|
|
| Performance W7 Folding 4-Way Lug Wrench (SAE) | Performance 18mm Chrome Vanadium Steel Combo Wrench |
 -Heavy duty drop forged steel-Chrome plated to resist corrosion-Folds down for compact storage-11/16, 3/4, 13/16 & 7/8-Heavy duty drop forged steel-Chrome plated to resist corrosion-Folds down for compact storage-11/16, 3/4, 13/16 & 7/8
10.99
Price: 10.99
|
 Heat treated chrome vanadium steel Full pattern, raised panel design Polished, chrome plated finish Heat treated chrome vanadium steel Full pattern, raised panel design Polished, chrome plated finish
2.99
Price: 2.99
|
|
|
| Performance W1159 5-Piece Snap Ring Plier Set | Performance Digital Multi-Tester |
 Plier handle and (4) tip assemblies (2) straight, (1) 45 and (1) 90 (1) spring retainer assembly Vinyl grip handles For Internal or External snap rings Plier handle and (4) tip assemblies (2) straight, (1) 45 and (1) 90 (1) spring retainer assembly Vinyl grip handles For Internal or External snap rings
9.99
Price: 9.99
|
 Features AC/DC volt measurement, DC current measurement, resistance measurement, diode test and Ohms For use on household appliances, automotive and a variety of hobbies Includes 2 test leads, instruction booklet and 9 volt batteryFeatures AC/DC volt measurement, DC current measurement, resistance measurement, diode test and Ohms For use on household appliances, automotive and a variety of hobbies Includes 2 test leads, instruction booklet and 9 volt battery
7.99
Price: 7.99
|
|
|
| Mechanics M3022B 3/4Inch Drive 1-3/16Inch 12 Point Socket | Mechanics M3024B 3/4Inch Drive 1-1/4Inch 12 Point Socket |
 1-3/16 size Drop forged steel Chrome plated to resist rust 1-3/16 size Drop forged steel Chrome plated to resist rust
7.99
Price: 7.99
|
1-1/4 size Drop forged steel Chrome plated to resist rust 1-1/4 size Drop forged steel Chrome plated to resist rust
7.99
Price: 7.99
|
|
|
| Performance W32150 1/2Inch Drive 10Inch Extension | Mechanics M756-26 13/16Inch Deep 1/2Inch Dr. Standard Impact Socket |
 Heat treated alloy steel Drop forged for strength Polished chrome plated finish 1/2 drive 10 extension bar Heat treated alloy steel Drop forged for strength Polished chrome plated finish 1/2 drive 10 extension bar
5.99
Price: 5.99
|
 13/16 depth Drop forged steel 13/16 depth Drop forged steel
4.99
Price: 4.99
|
|
|
| Wilton 34454 Spindle Sander Sleeve Small Set | Makita BJR181Z Factory Reconditioned 18-Volt Cordless LXT Lithium-Ion Reciprocating Saw, 0-2900 SPM - Tool Only |
 The Wilton 34454 is a set of six small 120 Grit Spindle Sander Sleeves. These spindle sander sleeves are all 4-1/2 Inches in length, designed for use with the Wilton 99179 Oscillating Spindle Sander.The Wilton 34454 is a set of six small 120 Grit Spindle Sander Sleeves. These spindle sander sleeves are all 4-1/2 Inches in length, designed for use with the Wilton 99179 Oscillating Spindle Sander.
2.99
Price: 2.99
|
 The Makita BJR181Z is a 18V Cordless LXT Lithium-Ion Reciprocating Saw. The Makita BJR181Z has a compact design at only 19-5/8 inch length and weighing only 8.1 lbs for less operator fatigue. The ergonomic shape of the Makita BJR181Z fits like a glove with even pressure and easy control. LXT Lithium-Ion provides longer run time, 5x lower self-discharge (for use any time) and 16 firm holding contact terminals (for constant high power). 45-minute optimum charger and battery communicates throughout the charging process using the built-in chip in the battery and built-in CPU chip in the charger. The Charger also uses Active 3 Control for current control, thermal control & voltage control. 45-minute Optimum Charger has a built-in fan to cool the battery to produce more lifetime work. The Makita BJR181Z utilizes the latest LXT Lithium-Ion (Li-Ion) battery technology for longer, more powerful working with 40% less weight.The Makita BJR181Z is a 18V Cordless LXT Lithium-Ion Reciprocating Saw. The Makita BJR181Z has a compact design at only 19-5/8 inch length and weighing only 8.1 lbs for less operator fatigue. The ergonomic shape of the Makita BJR181Z fits like a glove with even pressure and easy control. LXT Lithium-Ion provides longer run time, 5x lower self-discharge (for use any time) and 16 firm holding contact terminals (for constant high power). 45-minute optimum charger and battery communicates throughout the charging process using the built-in chip in the battery and built-in CPU chip in the charger. The Charger also uses Active 3 Control for current control, thermal control & voltage control. 45-minute Optimum Charger has a built-in fan to cool the battery to produce more lifetime work. The Makita BJR181Z utilizes the latest LXT Lithium-Ion (Li-Ion) battery technology for longer, more powerful working with 40% less weight.
99.99
Price: 99.99
|
|
|
| Hyde 04150 1-1/2Inch Stiff Red Star 4000 Putty Knife | Alltrade 835934 TradesPro 16 Piece Raised Panel Wrench Set - Metric |
 The Hyde 04150 is a 1-1/2 Stiff Red Star 4000 Putty Knife. It has ergonomically designed and tested one piece handle. The rugged, red polypropylene handle resists most common paint thinners. Its each blade tempered, ground and satin finished. Blade and handle is securely joined to rugged, red polypropylene handles with 2 zinc-plated steel grommets. The ergonomically designed and tested 1-piece handle resist most common paint thinners and feature large loop to hang.The Hyde 04150 is a 1-1/2 Stiff Red Star 4000 Putty Knife. It has ergonomically designed and tested one piece handle. The rugged, red polypropylene handle resists most common paint thinners. Its each blade tempered, ground and satin finished. Blade and handle is securely joined to rugged, red polypropylene handles with 2 zinc-plated steel grommets. The ergonomically designed and tested 1-piece handle resist most common paint thinners and feature large loop to hang.
1.99
Price: 1.99
|
 The Alltrade 835934 is a TradesPro 16 Piece Metric Raised Panel Wrench Set. The combination wrench set is made from chrome vanadium steel for durability and comes in a vinyl roll puch with hanger holes for easy portability.The Alltrade 835934 is a TradesPro 16 Piece Metric Raised Panel Wrench Set. The combination wrench set is made from chrome vanadium steel for durability and comes in a vinyl roll puch with hanger holes for easy portability.
34.99
Price: 34.99
|
|
|
| Steel City 80104 Mobile Base Extension for 50 Inch Fence Systems | Stanley 55-101 14-Inch FatMax Wrecking Bar |
 The Steel City 80104 offers convenient maneuverability. The Steel City 80104 is a mobile base extension for 50 Fence Systems and fits Steel City Mobile Bases 80101, 80102 and 80103.The leg extension kit expands the dimensions of a Steel City mobile base.The Steel City 80104 offers convenient maneuverability. The Steel City 80104 is a mobile base extension for 50 Fence Systems and fits Steel City Mobile Bases 80101, 80102 and 80103.The leg extension kit expands the dimensions of a Steel City mobile base.
79.99
Price: 79.99
|
 The Stanley 55101 is 14 FatMax Wrecking Bar. The Stanley 14-Inch FatMax Wrecking Bar is perfect for demolition jobs. Its flat, U-shaped prying end provides a stable base for lifting without damaging surfaces. It features forged, high-carbon steel construction; the wrecking bar is able to withstand 975 foot-pounds of bending momentum. Its cross-sectional area is 50 percent larger than a standard hexagonal bar. For comfort, it is designed with forged recesses for a better grip and a tri-lobe cross section for increased strength and durability. It includes an additional slot designed specifically for pulling nails, making demolition jobs easier. The wrecking bar is designed to withstand wear, with a high-visibility, powder-coated finish.The Stanley 55101 is 14 FatMax Wrecking Bar. The Stanley 14-Inch FatMax Wrecking Bar is perfect for demolition jobs. Its flat, U-shaped prying end provides a stable base for lifting without damaging surfaces. It features forged, high-carbon steel construction; the wrecking bar is able to withstand 975 foot-pounds of bending momentum. Its cross-sectional area is 50 percent larger than a standard hexagonal bar. For comfort, it is designed with forged recesses for a better grip and a tri-lobe cross section for increased strength and durability. It includes an additional slot designed specifically for pulling nails, making demolition jobs easier. The wrecking bar is designed to withstand wear, with a high-visibility, powder-coated finish.
6.99
Price: 6.99
|
|
|
| Bosch HC4511 1/2 inch x 11 inch x 16 inch Spline Shank Rotary Hammer Drill Bit | Bosch 37618-01 18-Volt Cordless Litheon V2SR Drill/Driver Kit |
 The Bosch HC4511 is a 1/2 inch x 11 inch x 16 inch Spline Shank Rotary Hammer Drill Bit. The spline rotary hammer bit is carbide tipped and fit Bosch as well as other spline hammers.The Bosch HC4511 is a 1/2 inch x 11 inch x 16 inch Spline Shank Rotary Hammer Drill Bit. The spline rotary hammer bit is carbide tipped and fit Bosch as well as other spline hammers.
18.99
Price: 18.99
|
 High torque mode produces over 650 in.-lbs.High speed mode produces 1,800 RPMDurashield� Housing & unibody powertrain provide optimum reinforcement to withstand real world conditionsBosch Litheon� Batteries - State-of-art Lithium-ion battery technology coupled with Bosch's proprietary ECP (Electronic Cell Protection) system guarantees the optimal performance of tool and batteries even for tough work conditions.Bosch Litheon� Batteries - Designed for maximum cyclelife, minimum self-discharge and no memory effect 1/2" Metal Chuck for increased durabilityHigh Strength Metal Collar enhances tool durability and protection when dropped on the chuckNewly Designed Powertrain and Gears increases tool life and durabilityLED Light is great for dark or enclosed areasErgonomic two-tone soft grip handle - For extended comfort and control25 Position ClutchVariable speed trigger for complete controlHigh torque mode produces over 650 in.-lbs.High speed mode produces 1,800 RPMDurashield� Housing & unibody powertrain provide optimum reinforcement to withstand real world conditionsBosch Litheon� Batteries - State-of-art Lithium-ion battery technology coupled with Bosch's proprietary ECP (Electronic Cell Protection) system guarantees the optimal performance of tool and batteries even for tough work conditions.Bosch Litheon� Batteries - Designed for maximum cyclelife, minimum self-discharge and no memory effect 1/2" Metal Chuck for increased durabilityHigh Strength Metal Collar enhances tool durability and protection when dropped on the chuckNewly Designed Powertrain and Gears increases tool life and durabilityLED Light is great for dark or enclosed areasErgonomic two-tone soft grip handle - For extended comfort and control25 Position ClutchVariable speed trigger for complete control
279.99
Price: 279.99
|
|
|
| Bosch HC2124 3/4 inch x 12 inch SDS-Plus Shank Bit - Carbide Tipped | Bosch HS2164 3 inch 20-1/2 inch Long Chisel |
 The Bosch HC2124 is a 3/4 inch x 12 inch SDS-Plus Shank Bit - Carbide Tipped. Bosch SDS-plus rotary hammer bits feature a patent-pending 4-flute design which provides fast dust removal. The carbide-tipped drill bit heads are harder, tougher and more resistant to extreme loads.The Bosch HC2124 is a 3/4 inch x 12 inch SDS-Plus Shank Bit - Carbide Tipped. Bosch SDS-plus rotary hammer bits feature a patent-pending 4-flute design which provides fast dust removal. The carbide-tipped drill bit heads are harder, tougher and more resistant to extreme loads.
19.99
Price: 19.99
|
 The Bosch HS2164 is a 3 inch 20-1/2 inch Long Chisel. The two 60 cutting angles clean concrete, scale, rust, cut troughs and some asphalt.The Bosch HS2164 is a 3 inch 20-1/2 inch Long Chisel. The two 60 cutting angles clean concrete, scale, rust, cut troughs and some asphalt.
26.99
Price: 26.99
|
|
|
| Bosch HC2167 1 inch x 18 inch SDS-Plus Shank Bit - Carbide Tipped | Bosch TS1007 Dado Cutter Insert for Table saw Model 4000 |
 The Bosch HC2167 is a 1 inch x 18 inch SDS-Plus Shank Bit - Carbide Tipped. Bosch SDS-plus rotary hammer bits feature a patent-pending 4-flute design which provides fast dust removal. The carbide-tipped drill bit heads are harder, tougher and more resistant to extreme loads.The Bosch HC2167 is a 1 inch x 18 inch SDS-Plus Shank Bit - Carbide Tipped. Bosch SDS-plus rotary hammer bits feature a patent-pending 4-flute design which provides fast dust removal. The carbide-tipped drill bit heads are harder, tougher and more resistant to extreme loads.
31.99
Price: 31.99
|
 13/16 inch x 8 inch dado capacityAccommodates 3/4 inch lumberCustom rabbeting capability13/16 inch x 8 inch dado capacityAccommodates 3/4 inch lumberCustom rabbeting capability
14.99
Price: 14.99
|
|
|
| Johnson B1024 24-Inch Big J Hardwood Level | Johnson 524 24-Inch Brass Bound Mahogany Level |
 The Johnson B1024 is a 24-Inch Big J Hardwood Level. From the large profile to the 16-gauge stainless steel bindings, these levels beg to get noticed. 3-piece tongue and groove construction uses select kiln dried hardwoods. Traditional recessed finger grips are ergonomically located for balance. A handy hang hole makes for easy storage and shock-protecting end caps protect level from drops. Unbreakable dual acrylic vials of high-tech engineered plastic round out the construction. Proudly made in the U.S.A., they have a nameplate for personalizing.The Johnson B1024 is a 24-Inch Big J Hardwood Level. From the large profile to the 16-gauge stainless steel bindings, these levels beg to get noticed. 3-piece tongue and groove construction uses select kiln dried hardwoods. Traditional recessed finger grips are ergonomically located for balance. A handy hang hole makes for easy storage and shock-protecting end caps protect level from drops. Unbreakable dual acrylic vials of high-tech engineered plastic round out the construction. Proudly made in the U.S.A., they have a nameplate for personalizing.
92.99
Price: 92.99
|
 The Johnson 524 24-Inch is a Brass Bound Mahogany Level. This level is made of select kiln-dried mahogany finished with 2 protective coats of clear, hand-rubbed lacquer. The edges are guarded by double-angle screwless brass bindings. Rubber end-caps are screwed on for better shock-absorption and durability. 2 clear curved vials per sight, each solid-set by hand. Heavy glass lenses protect all vials with a water-tight seal.The Johnson 524 24-Inch is a Brass Bound Mahogany Level. This level is made of select kiln-dried mahogany finished with 2 protective coats of clear, hand-rubbed lacquer. The edges are guarded by double-angle screwless brass bindings. Rubber end-caps are screwed on for better shock-absorption and durability. 2 clear curved vials per sight, each solid-set by hand. Heavy glass lenses protect all vials with a water-tight seal.
39.99
Price: 39.99
|
|
|
| Johnson 1415-1200 12-Inch Big J Magnetic Inspector's Torpedo Level with Multi-Pitch Vial | Johnson Level 40-6545 AccuLine Pro Electronic Self-Leveling Rotary Laser Level Kit with GreenBrite Technology |
 Powerful GripTight� V-Groove rare earth magnets hold to flat or round ferrous metal surfacesOversized solid aluminum frame is Job Site ToughOversized 1/2" diameter vials are easy readTop-read windows for easy viewingSurroundView� vial system for enhanced readability4 vials read plumb, level, Multi-Pitch� and 45Multi-Pitch� center vial reads slope in 1/8" incrementsPowerful GripTight� V-Groove rare earth magnets hold to flat or round ferrous metal surfacesOversized solid aluminum frame is Job Site ToughOversized 1/2" diameter vials are easy readTop-read windows for easy viewingSurroundView� vial system for enhanced readability4 vials read plumb, level, Multi-Pitch� and 45Multi-Pitch� center vial reads slope in 1/8" increments
19.99
Price: 19.99
|
 Green beam is 400% brighter than red beam laser levelsElectronically-controlled slope featureRange scan provides two chalk line widths and single point plus electronic rotation controlAutomatic-leveling vertical plane and horizontal beamAutomatic-leveling horizontal plane and plumb-up beamTwo rotating speeds of 200 rpm and 600 rpmIncludes adapter for vertical levelingDust and water resistantGreen beam is 400% brighter than red beam laser levelsElectronically-controlled slope featureRange scan provides two chalk line widths and single point plus electronic rotation controlAutomatic-leveling vertical plane and horizontal beamAutomatic-leveling horizontal plane and plumb-up beamTwo rotating speeds of 200 rpm and 600 rpmIncludes adapter for vertical levelingDust and water resistant
1199.99
Price: 1199.99
|
|
|
| Johnson Level 40-6522 AccuLine Pro Electronic Self-Leveling Rotary Laser Level with Integral Vertical Mount | DeWalt D55152 Heavy-Duty 1.1 HP Continuous 4 Gallon Electric Hand Carry Compressor with Control Panel, 3400 RPM |
 Electronically-controlled slope featureRange scan provides two chalk line widths and single point plus electronic rotation controlAutomatic-leveling vertical plane and horizontal beamAutomatic-leveling horizontal plane and plumb-up beamTwo rotating speeds of 120 rpm and 500 rpmIntegral vertical mountElectronically-controlled slope featureRange scan provides two chalk line widths and single point plus electronic rotation controlAutomatic-leveling vertical plane and horizontal beamAutomatic-leveling horizontal plane and plumb-up beamTwo rotating speeds of 120 rpm and 500 rpmIntegral vertical mount
849.99
Price: 849.99
|
 The DeWalt D55152 is a Heavy-Duty Electric Hand Carry Compressor. The compressor is ready for the job site with the professional contractor. The oil-lubricated pump with cast iron cylinder gives cu-ft. per minute at 90 PSI, enough to run multiple tools off the dual universal couplers. The panel is protected between the two tanks. It features large, easy-to-read gauges for tank pressure and regulated pressure, as well as the regulator and the two quick couplers. It has ball-type tank drain design and roll bars that surround and protect the 2.7 HP motor. The handle offers a well-balanced haul and its light enough for easy portability at 65 lbs. The DeWalt D55152 is a Heavy-Duty Electric Hand Carry Compressor. The compressor is ready for the job site with the professional contractor. The oil-lubricated pump with cast iron cylinder gives cu-ft. per minute at 90 PSI, enough to run multiple tools off the dual universal couplers. The panel is protected between the two tanks. It features large, easy-to-read gauges for tank pressure and regulated pressure, as well as the regulator and the two quick couplers. It has ball-type tank drain design and roll bars that surround and protect the 2.7 HP motor. The handle offers a well-balanced haul and its light enough for easy portability at 65 lbs.
309.99
Price: 309.99
|
|
|
| DeWalt Case 1-Tool Carrying Case | DeWalt DW7232 Miter Saw Workstation Work Piece Support and Length Stop for DW723 Miter Saw |
 The DeWalt Case is a 1-Tool Carrying Case. The DeWalt carrying case holds 1 Dewalt tool. Tools are not included.The DeWalt Case is a 1-Tool Carrying Case. The DeWalt carrying case holds 1 Dewalt tool. Tools are not included.
19.99
Price: 19.99
|
 The DeWalt DW7232 is a miter saw workstation work piece support and length stop for DW723 miter saw. The DeWalt DW7232 is for an exclusive use with the DW723 Miter Saw Workstation. The work stop/support can be repositioned quickly anywhere along the rail.The DeWalt DW7232 is a miter saw workstation work piece support and length stop for DW723 miter saw. The DeWalt DW7232 is for an exclusive use with the DW723 Miter Saw Workstation. The work stop/support can be repositioned quickly anywhere along the rail.
24.99
Price: 24.99
|
|
|
| DeWalt DW059K-2 18V Heavy-Duty Cordless High Torque Impact Wrench Kit, 1650 RPM | DeWalt DW9091 14.4V Battery Pack |
 The DeWalt DW059K-2 is a 18V Heavy-Duty Cordless Impact Wrench Kit. It part of the DeWalt line of heavy-duty cordless impact drivers and wrenches. The cordless impact wrench delivers 300 ft-lbs of maximum torque. Combining high torque with 1650 RPM and 2600 BPM, it provides the power and speed to drive larger lag screws into pressure treated materials and hard woods. The DW059K-2 wrench is the only cordless impact wrench equipped with a rocker switch for quick and easy forward and reverse. The DeWalt DW059K-2 is a 18V Heavy-Duty Cordless Impact Wrench Kit. It part of the DeWalt line of heavy-duty cordless impact drivers and wrenches. The cordless impact wrench delivers 300 ft-lbs of maximum torque. Combining high torque with 1650 RPM and 2600 BPM, it provides the power and speed to drive larger lag screws into pressure treated materials and hard woods. The DW059K-2 wrench is the only cordless impact wrench equipped with a rocker switch for quick and easy forward and reverse.
299.99
Price: 299.99
|
 Powers entire DeWalt line of 14.4V tools allowing users to run multiple tools off of the same battery pack Powers entire DeWalt line of 14.4V tools allowing users to run multiple tools off of the same battery pack
59.99
Price: 59.99
|
|
|
| Grip 21318 5-Pc Ball Joint & Tie Rod Separator Kit | Grip 22200 Universal Bearing Grease Packer |
 One handle fits an air hammer, the other is for use with a standard hammer Drop forged, chrome vandium steel forks Includes 3 different sized forks, air hammer handle, and standard hammer handleOne handle fits an air hammer, the other is for use with a standard hammer Drop forged, chrome vandium steel forks Includes 3 different sized forks, air hammer handle, and standard hammer handle
11.99
Price: 11.99
|
 Easy to use with either air or hand operated grease gunsPortable or bench mountZinc plated steelWorking height capacity 0-2. Bearing capacity Min. 25/64 inner diameter to max. 5-5/16 outer diameterEasy to use with either air or hand operated grease gunsPortable or bench mountZinc plated steelWorking height capacity 0-2. Bearing capacity Min. 25/64 inner diameter to max. 5-5/16 outer diameter
4.99
Price: 4.99
|
|
|
| Grip 28582 1-1/2Inch x 15Inch Ratchet Tie Down Strap | Grip 28744 2Inch x 27' Jumbo Cargo Latch Ratchet Tie Down Strap with InchJInch Hooks |
 Weather resistant nylon webbing for maximum strength Trouble free push button quick-release ratchet lock-down Durable straps will not loosen with road vibration Ideal for trucks, trailers, and hand dollies Double vinyl coated forged J hooks provide a secure hold without scratching 3000 lbs. weight capacity. 1-1/2 x 15 strap. Includes 1. Weather resistant nylon webbing for maximum strength Trouble free push button quick-release ratchet lock-down Durable straps will not loosen with road vibration Ideal for trucks, trailers, and hand dollies Double vinyl coated forged J hooks provide a secure hold without scratching 3000 lbs. weight capacity. 1-1/2 x 15 strap. Includes 1.
7.99
Price: 7.99
|
 Weather resistant nylon webbing for maximum strength Steel ratchet action lever easily tightens, locks, and releases easily with a trouble free push button quick release Durable straps will not loosen with road vibration Ideal for trucks, trailers, and all terrain vehicles, and more Double vinyl coated forged steel J hooks provide a secure hold with scratching 10,000 lbs. weight capacity. 2 x 27 ft. strap. Includes 1. Weather resistant nylon webbing for maximum strength Steel ratchet action lever easily tightens, locks, and releases easily with a trouble free push button quick release Durable straps will not loosen with road vibration Ideal for trucks, trailers, and all terrain vehicles, and more Double vinyl coated forged steel J hooks provide a secure hold with scratching 10,000 lbs. weight capacity. 2 x 27 ft. strap. Includes 1.
25.99
Price: 25.99
|
|
|
| Grip 32045A 4Inch Micro Ratcheting Bar Clamp & Spreader | Grip 32081A 36Inch Ratcheting Bar Clamp & Spreader |
 Strong and lightweightQuickly converts from a bar clamp to a spreaderNylon fiber filled jawsUse to hold workpiece in place while gluing or cutting in wood workingStrong and lightweightQuickly converts from a bar clamp to a spreaderNylon fiber filled jawsUse to hold workpiece in place while gluing or cutting in wood working
2.99
Price: 2.99
|
Strong and lightweightQuickly converts from a bar clamp to a spreaderNylon fiber filled jawsUse to hold workpiece in place while gluing or cutting in wood workingStrong and lightweightQuickly converts from a bar clamp to a spreaderNylon fiber filled jawsUse to hold workpiece in place while gluing or cutting in wood working
7.99
Price: 7.99
|
|
|
| Grip 35205 115-Piece Titanium Drill Bit Set | Grip 61038 100pc 3/16 inch x 1/2 inch Rivet Set |
 M2 high speed steel, titanium nitride coated Precision ground flutes cut quickly and cleanly Bits can be resharpened Includes (29) fractional sizes 1/16 to 1/2 by 1/64, (60) numbered sizes 1 to 60 gauge, and (26) letter sizes A to Z in storage case M2 high speed steel, titanium nitride coated Precision ground flutes cut quickly and cleanly Bits can be resharpened Includes (29) fractional sizes 1/16 to 1/2 by 1/64, (60) numbered sizes 1 to 60 gauge, and (26) letter sizes A to Z in storage case
54.99
Price: 54.99
|
 Rust proof aluminum heads with steel shanksPopular saizes blind rivets fit all hand and air riveters, foreign and domesticPlastic sectioned storage case includedRust proof aluminum heads with steel shanksPopular saizes blind rivets fit all hand and air riveters, foreign and domesticPlastic sectioned storage case included
3.99
Price: 3.99
|
|
|
| Grip 61155 3-Piece Cold Chisel Set | Grip 62401 25 Piece 2-Inch #2 Phillips Bits |
 Drop forged, heat treated, chrome vandium steel Professional quality Includes 3/8 x 5-1/2, 1/2 x 6, and 5/8 x 6-1/2 cold chisels Drop forged, heat treated, chrome vandium steel Professional quality Includes 3/8 x 5-1/2, 1/2 x 6, and 5/8 x 6-1/2 cold chisels
4.99
Price: 4.99
|
The Grip 62401 is set of 25 2-Inch #2 Phillips Bits.The Grip 62401 is set of 25 2-Inch #2 Phillips Bits.
5.99
Price: 5.99
|
|
|
| Grip 67040 3-Piece 3/8Inch Drive Chrome Extension Bars | Grip 67060 3-Piece 1/2-Inch Drive Chrome Extension Bars |
 Drop forged carbon steel Full poliched chrome finish Notches on extensions lock into sockets and ratchets Includes 15, 18, and 24 3/8 drive extensions Drop forged carbon steel Full poliched chrome finish Notches on extensions lock into sockets and ratchets Includes 15, 18, and 24 3/8 drive extensions
7.99
Price: 7.99
|
 Drop forged carbon steel Full poliched chrome finish Notches on extensions lock into sockets and ratchets Includes 15, 18, and 24 1/2 drive extensions Drop forged carbon steel Full poliched chrome finish Notches on extensions lock into sockets and ratchets Includes 15, 18, and 24 1/2 drive extensions
9.99
Price: 9.99
|
|
|
| Grip 92090 6-Piece Jumbo Hex Key Set - MM | Grip 93100 18Inch Steel Pipe Wrench |
 Heat treated chrome vandium steel with black oxide finishProfessional qualityIdeal for use on large machineryIncludes 8mm, 10mm, 12mm, 14mm, 17mm, and 19mm hex keys and heavy duty vinyl roll-up storage pouchHeat treated chrome vandium steel with black oxide finishProfessional qualityIdeal for use on large machineryIncludes 8mm, 10mm, 12mm, 14mm, 17mm, and 19mm hex keys and heavy duty vinyl roll-up storage pouch
17.99
Price: 17.99
|
 Drop forged, heat treated jaws and nutsHeavy duty cast iron I-beam handlesSturdy cast iron housing and I-beam handles for a comfortable grip and strength without excess weight18 long, 3-1/8 jaw openingDrop forged, heat treated jaws and nutsHeavy duty cast iron I-beam handlesSturdy cast iron housing and I-beam handles for a comfortable grip and strength without excess weight18 long, 3-1/8 jaw opening
15.99
Price: 15.99
|
|
|
| Milwaukee 49-22-1178 Jig Saw Blade Assortment | Milwaukee 48-11-1024 14.4V Ni-Cd Battery |
 The Milwaukee 49-22-1178 is a Jig Saw Blade Assortment. These Jig Saw blades are designed and manufactured for the professional user. Bi-metal blades last longer than high speed steel or carbon blades. Detail to the material used, teeth shape and sharpness make these blades cut clean, fast and have a longer life. These blades use a T-Shank and fit Milwaukee Jig Saws 6266-6, 6276-6, 6267-20, 6267-21 and other popular brands. It includes 5 individual blades. The Milwaukee 49-22-1178 is a Jig Saw Blade Assortment. These Jig Saw blades are designed and manufactured for the professional user. Bi-metal blades last longer than high speed steel or carbon blades. Detail to the material used, teeth shape and sharpness make these blades cut clean, fast and have a longer life. These blades use a T-Shank and fit Milwaukee Jig Saws 6266-6, 6276-6, 6267-20, 6267-21 and other popular brands. It includes 5 individual blades.
8.99
Price: 8.99
|
 14.4V, 2.4 Amp-Hour battery for use with Milwaukee 14.4V Driver Drills and Hammer DrillsMore powerful than the 1.7 AH battery for longer run times between chargesReversible Battery Pack allows to work in tight spaces and adjusts the balance of the toolsCan also be used with the Work Light, 49-24-015014.4V, 2.4 Amp-Hour battery for use with Milwaukee 14.4V Driver Drills and Hammer DrillsMore powerful than the 1.7 AH battery for longer run times between chargesReversible Battery Pack allows to work in tight spaces and adjusts the balance of the toolsCan also be used with the Work Light, 49-24-0150
79.99
Price: 79.99
|
|
|
| Milwaukee 6742-20 Drywall Screwdriver, 0-4000 RPM | Acme A751ADD25 Flexeel 25-Foot Recoil Hose |
 At 0-4000 RPM you can drive drywall screws as fast as your arm can move and have all the control you need for framing with the smooth activating trigger speed control Powerful 6.5 amp motor, 0 to 4000 RPM, variable speed control Ramp-off depth locator for easy depth adjustments All metal gear case and diaphragm 10 ft. 2-wire rubber cord Ergonomic tactile grip and two finger trigger for user comfort and balance Removable belt clip with bit storage Includes Screwdriver, belt clip, #2 drywall bit tip, magnetic bit tip holder, and depth locator assembly At 0-4000 RPM you can drive drywall screws as fast as your arm can move and have all the control you need for framing with the smooth activating trigger speed control Powerful 6.5 amp motor, 0 to 4000 RPM, variable speed control Ramp-off depth locator for easy depth adjustments All metal gear case and diaphragm 10 ft. 2-wire rubber cord Ergonomic tactile grip and two finger trigger for user comfort and balance Removable belt clip with bit storage Includes Screwdriver, belt clip, #2 drywall bit tip, magnetic bit tip holder, and depth locator assembly
54.99
Price: 54.99
|
 The Acme A751ADD25 is a Flexeel 25-Foot Recoil Hose. This hose has excellent coil memory, a very small bend radius, a tight coil diameter and up to 90% working length. The 8" supply end and 16" working end pigtails eliminate the need for a whip hose. Withstands 200 PSI working pressure.The Acme A751ADD25 is a Flexeel 25-Foot Recoil Hose. This hose has excellent coil memory, a very small bend radius, a tight coil diameter and up to 90% working length. The 8" supply end and 16" working end pigtails eliminate the need for a whip hose. Withstands 200 PSI working pressure.
29.99
Price: 29.99
|
|
|
| Porter-Cable 8924 9.6V -19.2V Battery Charger | Porter-Cable DA15200G 2 inch 15 Gauge Galvanized DA Finish Nails |
 The Porter-Cable 8924 is a 9.6V - 19.2V Battery Charger. Designed to prolong battery life, the advanced diagnostic charger senses the condition of the battery before charging. If the battery is too hot or too cold to be charged without risking damage, the charger will wait until the battery is in the proper temperature range before charging. A green light flashes while the charger is waiting and then lights solid during charging. When the battery is fully charged, the light goes off and the charger switches to trickle-charge mode. The battery can be left on the charger and it will remain fully charged without overcharging. Also, a second indicator light will flash red during charging to indicate a battery that is getting weak or has been fully discharged. If the battery is nearing the end of its useful life, the red light will continue to blink during the charging cycle. When a battery needs to be replaced because it will no longer take a charge, both lights-red and green-will blink during charging. The Porter-Cable 8924 is a 9.6V - 19.2V Battery Charger. Designed to prolong battery life, the advanced diagnostic charger senses the condition of the battery before charging. If the battery is too hot or too cold to be charged without risking damage, the charger will wait until the battery is in the proper temperature range before charging. A green light flashes while the charger is waiting and then lights solid during charging. When the battery is fully charged, the light goes off and the charger switches to trickle-charge mode. The battery can be left on the charger and it will remain fully charged without overcharging. Also, a second indicator light will flash red during charging to indicate a battery that is getting weak or has been fully discharged. If the battery is nearing the end of its useful life, the red light will continue to blink during the charging cycle. When a battery needs to be replaced because it will no longer take a charge, both lights-red and green-will blink during charging.
54.99
Price: 54.99
|
 2 inch 15 Gauge Finish Nails For DA model angle nailer, 32 degree nails Galvanized 4000 per box 2 inch 15 Gauge Finish Nails For DA model angle nailer, 32 degree nails Galvanized 4000 per box
42.99
Price: 42.99
|
|
|
| Porter-Cable DA15250 2-1/2 inch 15 Gauge DA Finish Nails | Delta 17-940 25-Piece Sanding Drum Kit (Contains 3/4 inch, 1 inch, 1-1/2 inch and 2 inch Drums) |
 2-1/2 inch15 Gauge Finish NailsFor DA model angle nailer, 32 degree nails4000 per box 2-1/2 inch15 Gauge Finish NailsFor DA model angle nailer, 32 degree nails4000 per box
43.99
Price: 43.99
|
 The Delta 17-940 is a 25-Piece Sanding Drum Kit. The Kit Converts the drill press for use as a spindle sander with these sanding drums. Five different drum sizes are included for sanding a variety of contour sizes. The drums can also be used in hand drills for freehand operations. This kit includes everything needed to get started, including two sets each of 80 and 120 grit sanding sleeves and a storage case. Fits any drill or drill press with a 1/4 inch or larger chuck. The Delta 17-940 is a 25-Piece Sanding Drum Kit. The Kit Converts the drill press for use as a spindle sander with these sanding drums. Five different drum sizes are included for sanding a variety of contour sizes. The drums can also be used in hand drills for freehand operations. This kit includes everything needed to get started, including two sets each of 80 and 120 grit sanding sleeves and a storage case. Fits any drill or drill press with a 1/4 inch or larger chuck.
31.99
Price: 31.99
|
|
|
| Delta 36-R31X-BC50 X5 10 inch Right Tilt Unisaw with 50 inch Biesemeyer Fence, 3450 RPM, 3.0 HP***** | Delta 43-495X Industrial X5 Heavy-Duty Shaper, 3 HP, 230V |
 The Delta 36-R31X-BC50 is a 10 inch right tilt unisaw with 50 inch biesemeyer fence. A 3 HP single phase motor housed in a new-age computer designed cover with integral 4 inch dust connector standard for optimal dust collection. The saw features two 10 inch cast-iron wings and the right extension table. The Delta 36-R31X-BC50 is a 10 inch right tilt unisaw with 50 inch biesemeyer fence. A 3 HP single phase motor housed in a new-age computer designed cover with integral 4 inch dust connector standard for optimal dust collection. The saw features two 10 inch cast-iron wings and the right extension table.
1999.00
Price: 1999.00
|
 The Delta 43-495X is a powerful, easy to use, and heavy-duty shaper. The Delta X5 is equipped with a 3HP TEFC motor runs on single-phase 230V and delivers enough power to perform most shaping operations. The motor of the Delta 43-495X shaper can run at 7000 and 10000 RPM and performs a shaping task in lesser time as oppose to its other counterparts. The forward and reverse options enables adjustments of the spindles smoothly and without much worry. The quick response controls are useful in making use of the two spindle speeds, which enable high speed shaping.The Delta 43-495X shaper has a full voltage motor starter (GPE), a poly V-belt, and two 10 inch cast-iron extension wings. The micro adjustable fence and a guard assembly of this power tool shaper add to the safety and flexibility of this tool. The cutter guard is a utility tool that is easy to use and can be the smoothly tapered start pin offers safety. The Delta 43-495X X5 Heavy-Duty Shaper comes with a best in class 5 year warranty.The Delta 43-495X is a powerful, easy to use, and heavy-duty shaper. The Delta X5 is equipped with a 3HP TEFC motor runs on single-phase 230V and delivers enough power to perform most shaping operations. The motor of the Delta 43-495X shaper can run at 7000 and 10000 RPM and performs a shaping task in lesser time as oppose to its other counterparts. The forward and reverse options enables adjustments of the spindles smoothly and without much worry. The quick response controls are useful in making use of the two spindle speeds, which enable high speed shaping.The Delta 43-495X shaper has a full voltage motor starter (GPE), a poly V-belt, and two 10 inch cast-iron extension wings. The micro adjustable fence and a guard assembly of this power tool shaper add to the safety and flexibility of this tool. The cutter guard is a utility tool that is easy to use and can be the smoothly tapered start pin offers safety. The Delta 43-495X X5 Heavy-Duty Shaper comes with a best in class 5 year warranty.
2499.00
Price: 2499.00
|
|
|
| Irwin� Vise-Grip� 11R 11Inch Locking C-Clamp with Regular Tips | Titan 11060 8Inch Stubby Adjustable Wrench |
 11 with a jaw adjustment of up to 4, and a throat depth of 2-5/8Adjusts to the correct opening, Easily adjusted to various sizesLocks with the squeeze of one hand11 with a jaw adjustment of up to 4, and a throat depth of 2-5/8Adjusts to the correct opening, Easily adjusted to various sizesLocks with the squeeze of one hand
19.99
Price: 19.99
|
 Precision scale up to 1 capacity Chrome Vanadium steel construction Contoured cushion grip handle High Quality Imported Precision scale up to 1 capacity Chrome Vanadium steel construction Contoured cushion grip handle High Quality Imported
7.99
Price: 7.99
|
|
|
| Hobart H222106R22 .030 Flux-Cored Welding Wire - E71T-11 Carbon-Steel | Hobart Welders Weld-It H222108-R22 E71T-11 Flux Cored/Carbon Steel Welding Wire - .035Inch, 10 lbs. |
 -Great in single- or multi-pass welds particularly on thin-gauge mild or galvanized steel. -Typically used for light structural, machinery part fabrication, prefab construction, railroad car repair, short assembly welds, tanks and general fabrication. -Great in single- or multi-pass welds particularly on thin-gauge mild or galvanized steel. -Typically used for light structural, machinery part fabrication, prefab construction, railroad car repair, short assembly welds, tanks and general fabrication.
74.99
Price: 74.99
|
Hobart Welders Weld-It H222108-R22 is a Flux-Cored Welding Wire. Great in single- or multi-pass welds particularly on thin-gauge mild or galvanized steel. Typically used for light structural, machinery part fabrication, prefab construction, railroad car repair, short assembly welds, tanks and general fabrication.Hobart Welders Weld-It H222108-R22 is a Flux-Cored Welding Wire. Great in single- or multi-pass welds particularly on thin-gauge mild or galvanized steel. Typically used for light structural, machinery part fabrication, prefab construction, railroad car repair, short assembly welds, tanks and general fabrication.
54.99
Price: 54.99
|
|
|
| Hobart Welders Weld-It 770456 5-Pound Plastic Container of 6011 Welding Stick Electrodes - 3/32Inch | Hobart Welders Weld-It 770463 10-Pound Plastic Container of 6011 Welding Stick Electrodes - 5/32Inch |
 Hobart Welders Weld-It 770456 6011 is a Welding Stick Electrode. It is an all-purpose stick electrode for use in all positions on carbon and galvanized steel which has 60,000 PSI tensile strength. It runs on AC or DCEP (reverse) polarity. It is a deep penetrating welding rod, ideal for welding through light to medium amounts of dirty, rusty or painted materials.Hobart Welders Weld-It 770456 6011 is a Welding Stick Electrode. It is an all-purpose stick electrode for use in all positions on carbon and galvanized steel which has 60,000 PSI tensile strength. It runs on AC or DCEP (reverse) polarity. It is a deep penetrating welding rod, ideal for welding through light to medium amounts of dirty, rusty or painted materials.
13.99
Price: 13.99
|
Hobart Welders Weld-It 770463 6011 Welding Stick an all-purpose stick electrode for use in all positions on carbon and galvanized steel which has 60,000 PSI tensile strength. It runs on AC or DCEP (reverse) polarity. It is a deep penetrating welding rod, ideal for welding through light to medium amounts of dirty, rusty or painted materials.Hobart Welders Weld-It 770463 6011 Welding Stick an all-purpose stick electrode for use in all positions on carbon and galvanized steel which has 60,000 PSI tensile strength. It runs on AC or DCEP (reverse) polarity. It is a deep penetrating welding rod, ideal for welding through light to medium amounts of dirty, rusty or painted materials.
17.99
Price: 17.99
|
|
|
| Hobart Welders Weld-It 770009 Arc Welding Helmet Replacement Lens- #9 4-1/2Inch x 5-1/4Inch (2-Pack) | Hobart Welders 770123 Haynes Welding Manual |
 Hobart Welders Weld-It 770009 shaded lens is standard size replacement for helmets. It offers high-quality eye protection for all types of arc welding, including the necessary protection against ultraviolet rays. Clear cover plates, inserted in front of the shaded lens protect them from molten metal spatter, and typical wear.Hobart Welders Weld-It 770009 shaded lens is standard size replacement for helmets. It offers high-quality eye protection for all types of arc welding, including the necessary protection against ultraviolet rays. Clear cover plates, inserted in front of the shaded lens protect them from molten metal spatter, and typical wear.
4.99
Price: 4.99
|
 -The fundamentals of welding in a well written book for do-it-yourselfers or beginner welders who want to learn the methods and principles of welding from the ground up.-The fundamentals of welding in a well written book for do-it-yourselfers or beginner welders who want to learn the methods and principles of welding from the ground up.
19.99
Price: 19.99
|
|
|
| Hobart 770265 Protective Lems Shield Kit for Welding Helmet | Adjustable Clamps Jorgensen 7272 72 in. I-Bar Clamp |
-Hobart 770265 Protective Lems Shield Kit for Welding Helmet-Hobart 770265 Protective Lems Shield Kit for Welding Helmet
5.99
Price: 5.99
|
 -These heavy-duty clamps are designed for high-demand professional and industrial use. The steel I-bar is extremely strong and resistant to twisting and bending. The sliding head is cast of tough ductile iron and features a 4-piece, hardened steel clutch.-These heavy-duty clamps are designed for high-demand professional and industrial use. The steel I-bar is extremely strong and resistant to twisting and bending. The sliding head is cast of tough ductile iron and features a 4-piece, hardened steel clutch.
45.99
Price: 45.99
|
|
|
| Big Horn 19547 2Inch x 2Inch x 12Inch Abrasive Belt Cleaner | Big Horn 19680 25-Piece Miter Clamp Set with Case |
 -The Big Horn 19547 is a 2 x 2 x 12 Abrasive Belt Cleaner. It is used for cleaning sanding belts and discs. It provides great control during abrasive belt cleaning. The belt cleaner does not feature a handle but it can be connected to the cleaner.-The Big Horn 19547 is a 2 x 2 x 12 Abrasive Belt Cleaner. It is used for cleaning sanding belts and discs. It provides great control during abrasive belt cleaning. The belt cleaner does not feature a handle but it can be connected to the cleaner.
12.99
Price: 12.99
|
 -Quick and easy to apply made from tempered spring steel, these sharp ended clamps hold by pulling the pointed ends apart to engage. Set includes one spreader and 4 clamps each of the 6 sizes listed. (24 clamps total)-Quick and easy to apply made from tempered spring steel, these sharp ended clamps hold by pulling the pointed ends apart to engage. Set includes one spreader and 4 clamps each of the 6 sizes listed. (24 clamps total)
69.99
Price: 69.99
|
|
|
| Pull'r 94000 Zombie� Gel-Dome Kneepads | Performance W750 7-Piece Chisel and Punch Set |
 Patent Pending Gel-Dome technology allow displacement of gel to the areas of the knee that need it mostNo Rock� pad provides stabilitySewn cap with Wingsprovides more protectionAdjustable cross hatch Patent Pending Velcro� strapsRubberized cap protects work surfaces from being marred or scratchedPatent Pending Gel-Dome technology allow displacement of gel to the areas of the knee that need it mostNo Rock� pad provides stabilitySewn cap with Wingsprovides more protectionAdjustable cross hatch Patent Pending Velcro� strapsRubberized cap protects work surfaces from being marred or scratched
24.99
Price: 24.99
|
 Heat treated carbon steel Popular size range (3) cold chisels, (2) taper punches, (1) pin punch & (1) center punch Heat treated carbon steel Popular size range (3) cold chisels, (2) taper punches, (1) pin punch & (1) center punch
8.99
Price: 8.99
|
|
|
| Bench Dog 10-027 Polymer Crown-Cut Crown Molding Cutting Jig | Performance W2500P - 3/8� Dr. Impact Driver |
 The safest and easiest way to cut crown moldingEliminates trial and errorMade from durable polymer in the USAFits all 10" and larger miter sawsExclusive fence risers adjust to fit crown molding up to 6" wideThe safest and easiest way to cut crown moldingEliminates trial and errorMade from durable polymer in the USAFits all 10" and larger miter sawsExclusive fence risers adjust to fit crown molding up to 6" wide
34.99
Price: 34.99
|
 Loosen rusted bolts, screws, etc. Reversible action Includes 4 bits #2 and #3 Phillips and 5/16 and 3/8 regular Handy storage case Loosen rusted bolts, screws, etc. Reversible action Includes 4 bits #2 and #3 Phillips and 5/16 and 3/8 regular Handy storage case
14.99
Price: 14.99
|
|
|
| Performance W4001DB 40pc Tap and Die Set (SAE) | Mechanics M7109 3-1/2lb Axe With Fiberglass Handle |
 NC, NF and NPT sizes17 taps & 17 diesTap wrench, T-handle tap wrench, die stock, screwdriver & screw pitch gaugeStorage caseNC, NF and NPT sizes17 taps & 17 diesTap wrench, T-handle tap wrench, die stock, screwdriver & screw pitch gaugeStorage case
18.99
Price: 18.99
|
 Great for many uses including fishing, hunting, and cutting woodFine polished steel head with high visibility fiberglass handle3-1/2lb axe 33 inches long.Great for many uses including fishing, hunting, and cutting woodFine polished steel head with high visibility fiberglass handle3-1/2lb axe 33 inches long.
18.99
Price: 18.99
|
|
|
| Wilmar W54006 Mechanic's Shop Cart with Tool Holder, Bins and Drawer | Makita 194093-8 Adjustable Portable Table Saw Stand with Wheels |
 The Wilmar W54006 is a Mechanics Shop Cart with Tool Holder, Bins and Drawer.The Wilmar W54006 is a Mechanics Shop Cart with Tool Holder, Bins and Drawer.
89.99
Price: 89.99
|
 Makita 194093-8 is adjustable portable table saw stand with Wheels which is made from high quality tubeless steel and comes fully assembled except for the base plate which can be easily attached using the two nuts and bolts supplied.There are five height settings (260mm � 630mm) including the transportation mode which effectively turns the stand into a sack barrow for easy transportation.The stand and saw can then be stored on its end using the flat base for limited storage environments. The height of the stand can be easily adjusted thanks to the gas rams weight assistance mechanism while the leveling feet ensure perfect all round ground contact.Makita 194093-8 is adjustable portable table saw stand with Wheels which is made from high quality tubeless steel and comes fully assembled except for the base plate which can be easily attached using the two nuts and bolts supplied.There are five height settings (260mm � 630mm) including the transportation mode which effectively turns the stand into a sack barrow for easy transportation.The stand and saw can then be stored on its end using the flat base for limited storage environments. The height of the stand can be easily adjusted thanks to the gas rams weight assistance mechanism while the leveling feet ensure perfect all round ground contact.
379.99
Price: 379.99
|
|
|
| Makita A-94736 14 inch Segmented Rim Diamond Masonry Blade | Makita 714085-A 3 inch Carbide Tipped Hole Saw Bit |
 The Makita A-94736 is a 14 inch Segmented Rim Diamond Masonry Blade. It features segmented rim slots which help deliver a faster and cooler cut in multiple applications. It is used for general purpose cutting and is also great for cutting cured concrete, block and brick.The Makita A-94736 is a 14 inch Segmented Rim Diamond Masonry Blade. It features segmented rim slots which help deliver a faster and cooler cut in multiple applications. It is used for general purpose cutting and is also great for cutting cured concrete, block and brick.
99.99
Price: 99.99
|
 Lasts 15x longer and drills 2.6x faster than Bi-M hole sawsSpecially designed carbide tips for cutting clean holesCuts a 3 inch diameter hole; max. depth of 1/8 inch with a 2-1/2 inch overall lengthLasts 15x longer and drills 2.6x faster than Bi-M hole sawsSpecially designed carbide tips for cutting clean holesCuts a 3 inch diameter hole; max. depth of 1/8 inch with a 2-1/2 inch overall length
139.99
Price: 139.99
|
|
|
| Makita 714073-A 7/8 inch Carbide Tipped Hole Saw Bit | Makita 714078-A 1-3/8 inch Carbide Tipped Hole Saw Bit |
 Lasts 15x longer and drills 2.6x faster than Bi-M hole sawsSpecially designed carbide tips for cutting clean holesCuts a 7/8 inch diameter hole; max. depth of 1/8 inch with a 2-1/2 inch overall lengthLasts 15x longer and drills 2.6x faster than Bi-M hole sawsSpecially designed carbide tips for cutting clean holesCuts a 7/8 inch diameter hole; max. depth of 1/8 inch with a 2-1/2 inch overall length
39.99
Price: 39.99
|
 Lasts 15x longer and drills 2.6x faster than Bi-M hole sawsSpecially designed carbide tips for cutting clean holesCuts a 1-3/8 inch diameter hole; max. depth of 1/8 inch with a 2-1/2 inch overall lengthLasts 15x longer and drills 2.6x faster than Bi-M hole sawsSpecially designed carbide tips for cutting clean holesCuts a 1-3/8 inch diameter hole; max. depth of 1/8 inch with a 2-1/2 inch overall length
49.99
Price: 49.99
|
|
|
| Makita 317934-3 Dado Head Insert for 2704X1 Table Saw | Makita 721005-A 3-3/8 inch 24 Teeth Carbide Tipped Saw Blade |
 The Makita 317934-3 is a Dado Head Insert for 2704X1 Table Saw. This dado insert has a wider dado blade slot for cutting precision grooves.The Makita 317934-3 is a Dado Head Insert for 2704X1 Table Saw. This dado insert has a wider dado blade slot for cutting precision grooves.
29.99
Price: 29.99
|
 Special thin kerf design for more cuts per battery chargeCarbide tipped for fast, smooth cuts and long life in wood, plastics and hard woodSpecial thin kerf design for more cuts per battery chargeCarbide tipped for fast, smooth cuts and long life in wood, plastics and hard wood
23.99
Price: 23.99
|
|
|
| Makita 194086-5 Left Extension Table for 2704 Table Saw | Makita 194087-3 Rear Extension Table for 2704 Table Saw |
 The Makita 194086-5 is a Left Extension Table for 2704 Table Saw. This table helps to support long work pieces for ripping them on a single pass.The Makita 194086-5 is a Left Extension Table for 2704 Table Saw. This table helps to support long work pieces for ripping them on a single pass.
44.99
Price: 44.99
|
 The Makita 194087-3 is a Rear Extension Table for 2704 Table Saw. This table helps to support long work pieces for ripping them on a single pass.The Makita 194087-3 is a Rear Extension Table for 2704 Table Saw. This table helps to support long work pieces for ripping them on a single pass.
44.99
Price: 44.99
|
|
|
| Makita A-94758 10-Inch Premium Crosscutting Carbide-Tipped Miter Saw Blade with 40 Teeth | Makita A-94683 4-1/2 Inch Segmented Diamond Blade, General Purpose |
 ATAF (alternate top and alternate face) tooth design for ultra precision cuttingJapanese ultra-thin kerf carbide-tipped design provides smoother cuts with less drag on the motor and minimal material lossFully-hardened and expertly hand-tensioned steel saw plates for true cutsMicro-grain Carbide Teeth are honed with up to 600 grit for a mirror finishUltra-coated blades provide reduced pitch build-upUltra-coated blades feature resin bond filled laser cut slots for quiet and smooth cuttingATAF (alternate top and alternate face) tooth design for ultra precision cuttingJapanese ultra-thin kerf carbide-tipped design provides smoother cuts with less drag on the motor and minimal material lossFully-hardened and expertly hand-tensioned steel saw plates for true cutsMicro-grain Carbide Teeth are honed with up to 600 grit for a mirror finishUltra-coated blades provide reduced pitch build-upUltra-coated blades feature resin bond filled laser cut slots for quiet and smooth cutting
52.99
Price: 52.99
|
 The Makita A-94683 is a 4-1/2 Inch Segmented Diamond Blade for General Purpose Cutting.The Makita A-94683 is a 4-1/2 Inch Segmented Diamond Blade for General Purpose Cutting.
10.99
Price: 10.99
|
|
|
| Makita A-94699 5-Inch Segmented Diamond Blade, General Purpose | Makita A-94714 7-Inch Segmented Diamond Blade, General Purpose |
 The Makita A-94699 is a 5-Inch Segmented Diamond Blade for General Purpose Cutting.The Makita A-94699 is a 5-Inch Segmented Diamond Blade for General Purpose Cutting.
12.99
Price: 12.99
|
 The Makita A-94714 is a 7-Inch Segmented Diamond Blade for General Purpose Cutting.The Makita A-94714 is a 7-Inch Segmented Diamond Blade for General Purpose Cutting.
18.99
Price: 18.99
|
|
|
| Makita 122720-A Outfeed Tables From Rousseau Co. | Makita A-34481 3/8 inch x 21 inch 10 PK Abrasive Sanding Belts 120 Grit |
 The Makita 122720-A attaches itself to saw tables #1222700 and 122731-A. It is a folding unit and can be positioned anywhere. The outfeed table measures 18 inch x 45 inch. The front edge of the table is slightly lower than the saw surface to prevent material from hanging up.The Makita 122720-A attaches itself to saw tables #1222700 and 122731-A. It is a folding unit and can be positioned anywhere. The outfeed table measures 18 inch x 45 inch. The front edge of the table is slightly lower than the saw surface to prevent material from hanging up.
199.99
Price: 199.99
|
 The Makita A-34481 is a pack of 10, 3/8 inch x 21 inch 10 PK Abrasive Sanding Belts 120 Grit. It is used for wood, plastics, resins and metals. They fit Makita model 9032 3/8 inch Belt Sander.The Makita A-34481 is a pack of 10, 3/8 inch x 21 inch 10 PK Abrasive Sanding Belts 120 Grit. It is used for wood, plastics, resins and metals. They fit Makita model 9032 3/8 inch Belt Sander.
11.99
Price: 11.99
|
|
|
| Makita A-34562 1/2 inch x 21 inch 10 PK Abrasive Sanding Belts 40 Grit | Senco PC0781/A20 Pneumatic Palm Nailer, 50 - 125 PSIG |
 The Makita A-34562 is a pack of 10, 1/2 inch x 21 inch 10 PK Abrasive Sanding Belts 40 Grit. It is used for wood, plastics, resins and metals. They fit Makita model 9032 3/8 inch Belt Sander.The Makita A-34562 is a pack of 10, 1/2 inch x 21 inch 10 PK Abrasive Sanding Belts 40 Grit. It is used for wood, plastics, resins and metals. They fit Makita model 9032 3/8 inch Belt Sander.
13.99
Price: 13.99
|
 The Senco PC0781/A20 is a Pneumatic Palm Nailer. The pneumatic hand nailer is the ideal tool for tight space nailing and metal connector attachment. The tool weighs less than 3 lbs and fits into the palm of the hand. This makes it ideal for joust hangers, metal straps and pole barn assembly. It eliminates the possibility of marred work surfaces that often result from errant hammer blows, because it just needs a slight hand pressure to activate the tool.The Senco PC0781/A20 is a Pneumatic Palm Nailer. The pneumatic hand nailer is the ideal tool for tight space nailing and metal connector attachment. The tool weighs less than 3 lbs and fits into the palm of the hand. This makes it ideal for joust hangers, metal straps and pole barn assembly. It eliminates the possibility of marred work surfaces that often result from errant hammer blows, because it just needs a slight hand pressure to activate the tool.
79.99
Price: 79.99
|
|
|
| Alltrade 648591 One-Man Brake Bleeder | Steel City 40200H 13-Inch Deluxe Portable Planer with Helical Head |
 The Alltrade 648591 is a One-Man Brake Bleeder. It is used for bleeding of all types of automotive hydraulic cylinders by one person. It features durable plastic bottle with magnetic clamp, tapered fittings that fit both bleed screws & master cylinder fittings and 3 pieces of vinyl hose. The Alltrade 648591 is a One-Man Brake Bleeder. It is used for bleeding of all types of automotive hydraulic cylinders by one person. It features durable plastic bottle with magnetic clamp, tapered fittings that fit both bleed screws & master cylinder fittings and 3 pieces of vinyl hose.
5.72
Price: 5.72
|
 Powerful 15 amp Motor: Drives the patented Helical Head cutterhead to provide plenty of power for full width planing or long run jobs.Patented Helical Head:Helical Head has 26 indexible HSS inserts for superior finish, longer cut time, and quieter operation.Extra Large In-Feed & Out Feed Tables:Offers extra support for large work pieces and folds up easily for storage or transport.Depth of cut Indicator:Easy to read indicator allows for precise cuts and fast set up time.Snipe Lock:Firmly locks cutter head assembly to help minimize snipe.Powerful 15 amp Motor: Drives the patented Helical Head cutterhead to provide plenty of power for full width planing or long run jobs.Patented Helical Head:Helical Head has 26 indexible HSS inserts for superior finish, longer cut time, and quieter operation.Extra Large In-Feed & Out Feed Tables:Offers extra support for large work pieces and folds up easily for storage or transport.Depth of cut Indicator:Easy to read indicator allows for precise cuts and fast set up time.Snipe Lock:Firmly locks cutter head assembly to help minimize snipe.
599.99
Price: 599.99
|
|
|
| Steel City 35920 10-Inch Granite Cabinet Saw | Steel City 35930 10-Inch Deluxe Granite Cabinet Saw |
 Cabinet-Mounted Trunion System:The precision-machined cast iron trunions are mounted to the cabinet to ensure perfect blade alignment, increased stability and ease of adjustment.Built-In Riving Knife:Quick release riving knife gives you additional safety when making a variety of cuts.Built-In Mobile Base:Mobile base is integrated into the stand for excellent maneuverability and total portability without the added expense.Totally Enclosed Cabinet with 4" Dust Port:Provides more efficient dust collection than an open or partially enclosed stand unit.Exterior Adjustment for 45 Degree and 90 Degree Blade Stops:Provides easy and accurate settings for the 45 degree and 90 degree positive stops.1.75 HP TEFC Dual Capacitor Motor:Provides plenty of power for tough cutting operations.Cabinet-Mounted Trunion System:The precision-machined cast iron trunions are mounted to the cabinet to ensure perfect blade alignment, increased stability and ease of adjustment.Built-In Riving Knife:Quick release riving knife gives you additional safety when making a variety of cuts.Built-In Mobile Base:Mobile base is integrated into the stand for excellent maneuverability and total portability without the added expense.Totally Enclosed Cabinet with 4" Dust Port:Provides more efficient dust collection than an open or partially enclosed stand unit.Exterior Adjustment for 45 Degree and 90 Degree Blade Stops:Provides easy and accurate settings for the 45 degree and 90 degree positive stops.1.75 HP TEFC Dual Capacitor Motor:Provides plenty of power for tough cutting operations.
649.99
Price: 649.99
|
1 3/4 HP TEFC Dual Capacity MotorSolid Granite Table and WingsBuilt-in Riving KnifeCabinet Mounted Trunion System1 3/4 HP TEFC Dual Capacity MotorSolid Granite Table and WingsBuilt-in Riving KnifeCabinet Mounted Trunion System
999.99
Price: 999.99
|
|
|
| Steel City 40625 6-Inch Delixe Jointer with QC Knives | Steel City 40635 6-Inch Granite Jointer with QC Knives |
 Center Mounted Fence:Oversized center-mounted fence provides maximum support throughout the entire cut. Fence tilts in and out for bevel or chamfering operations.Wedge Bed Design:Oversized tables are mounted on dovetailed ways providing stability and long life.Built-In Mobile Base:Mobile base is integrated into the stand for excellent maneuverability and total portability without the added expense.Center Mounted Fence:Oversized center-mounted fence provides maximum support throughout the entire cut. Fence tilts in and out for bevel or chamfering operations.Wedge Bed Design:Oversized tables are mounted on dovetailed ways providing stability and long life.Built-In Mobile Base:Mobile base is integrated into the stand for excellent maneuverability and total portability without the added expense.
899.99
Price: 899.99
|
 Please note that this item is on backorder until late MaySolid Granite Beds and FenceLarge Extra Long 68 Granite TablePowerful 1-1/2 HP MotorHelical CutterheadBuilt-in Mobile BasePlease note that this item is on backorder until late MaySolid Granite Beds and FenceLarge Extra Long 68 Granite TablePowerful 1-1/2 HP MotorHelical CutterheadBuilt-in Mobile Base
949.99
Price: 949.99
|
|
|
| Steel City 40640 6-Inch Granite Jointer with Helical Head | Steel City 40655 8-Inch Granite Jointer with QC Knives |
Solid Granite Beds and FenceLarge Extra Long 68 Granite TablePowerful 1-1/2 HP MotorHelical CutterheadBuilt-in Mobile BaseSolid Granite Beds and FenceLarge Extra Long 68 Granite TablePowerful 1-1/2 HP MotorHelical CutterheadBuilt-in Mobile Base
1199.99
Price: 1199.99
|
 Center Mounted Granite Fence: Extra Large center mounted granite fence provides maximum support throughout the entire cut. Fence tilts in and out for bevel or chamfering operations.Quick Change Knives: Cutterhead has quick change knives for ease of replacement and efficient operation.Large Extra Long 77" Granite Table: A Steel City exclusive, the oversized granite beds give you unsurpassed accuracy, will never twist or warp, and will not rust or corrode.Conveniently-Positioned Paddle Type Magnetic Switch: Switch is placed high above the table, in full operator view for greater visibility and quick access.Conveniently-Located 4" Dust Port: Provides more efficient dust collection than an open or partially enclosed stand unit.Built-In Mobile Base: Mobile base is integrated into the stand for excellent maneuverability and total portability without the added expense.Center Mounted Granite Fence: Extra Large center mounted granite fence provides maximum support throughout the entire cut. Fence tilts in and out for bevel or chamfering operations.Quick Change Knives: Cutterhead has quick change knives for ease of replacement and efficient operation.Large Extra Long 77" Granite Table: A Steel City exclusive, the oversized granite beds give you unsurpassed accuracy, will never twist or warp, and will not rust or corrode.Conveniently-Positioned Paddle Type Magnetic Switch: Switch is placed high above the table, in full operator view for greater visibility and quick access.Conveniently-Located 4" Dust Port: Provides more efficient dust collection than an open or partially enclosed stand unit.Built-In Mobile Base: Mobile base is integrated into the stand for excellent maneuverability and total portability without the added expense.
1349.99
Price: 1349.99
|
|
|
| Steel City 40660 8-Inch Granite Jointer with Helical Head | Steel City 50125 14-Inch Granite Bandsaw |
Solid Granite Beds & FenceLarge Extra Long 75 TablePowerful 2 HP MotorHelical CutterheadBuilt in Mobile BaseSolid Granite Beds & FenceLarge Extra Long 75 TablePowerful 2 HP MotorHelical CutterheadBuilt in Mobile Base
1649.99
Price: 1649.99
|
 Powerful 3/4 HP Motor: The 3/4 HP Induction motor provides plenty of power for all your sawing needs.Exclusive Granite Table: Solid granite table provides unsurpassed rust resistance, flatness, and will never twist or warp. Micro-Adjustable Guides: Micro-adjusted upper and lower guides give you safe and accurate set-ups when changing blade sizes. Paddle Type Safety Switch: Paddle type on/off switch provides increased visibility and operator safety. Switch can also be locked to prevent unauthorized use. Precision balanced Cast Aluminum Wheels: Precision balanced upper and lower wheels ensure worry free tracking and less vibration. 4" Dust Port: Integral dust port provides maximum extraction of dust chips, while brush minimizes sawdust build-up on the lower wheel.Powerful 3/4 HP Motor: The 3/4 HP Induction motor provides plenty of power for all your sawing needs.Exclusive Granite Table: Solid granite table provides unsurpassed rust resistance, flatness, and will never twist or warp. Micro-Adjustable Guides: Micro-adjusted upper and lower guides give you safe and accurate set-ups when changing blade sizes. Paddle Type Safety Switch: Paddle type on/off switch provides increased visibility and operator safety. Switch can also be locked to prevent unauthorized use. Precision balanced Cast Aluminum Wheels: Precision balanced upper and lower wheels ensure worry free tracking and less vibration. 4" Dust Port: Integral dust port provides maximum extraction of dust chips, while brush minimizes sawdust build-up on the lower wheel.
519.99
Price: 519.99
|
|
|
| Paslode 404525 1-1/4 Inch x .120 Inch Roofer's Choice� Roofing Coil Nails (7,200 Per Box) | Stanley 16-288 5/8-Inch X 6-3/4-Inch Cold Chisel |
 All Paslode fasteners feature high holding power, ease of drive and advanced collation methods. They are engineered to ensure trouble-free performance on the job site. The Paslode 404525 1-1/4 x .120 Roofers Choice� Roofing Coil Nails come in a wire coil which saves you time and trouble because it prevents jamming of your tool and reduces the chances of the nails breaking. With the Paslode 404525, you can focus on the task at hand instead of worrying about the performance of your tool. The Paslode 404525 Roofing Coil Nails can be used with the Paslode 501245 R175-C Roofers Choice� Pneumatic Roofing Coil Nailer.Attention International Customers Paslode products cannot be shipped outside of the USA.All Paslode fasteners feature high holding power, ease of drive and advanced collation methods. They are engineered to ensure trouble-free performance on the job site. The Paslode 404525 1-1/4 x .120 Roofers Choice� Roofing Coil Nails come in a wire coil which saves you time and trouble because it prevents jamming of your tool and reduces the chances of the nails breaking. With the Paslode 404525, you can focus on the task at hand instead of worrying about the performance of your tool. The Paslode 404525 Roofing Coil Nails can be used with the Paslode 501245 R175-C Roofers Choice� Pneumatic Roofing Coil Nailer.Attention International Customers Paslode products cannot be shipped outside of the USA.
39.99
Price: 39.99
|
 The Stanley is 16288 5/8 x 6-3/4 Cold Chisel. The One-piece construction forged from chrome vanadium steel for increased strength and durability. It is hardened, quenched and tempered for long life and added safety. The powder coat finish is for increased visibility.The Stanley is 16288 5/8 x 6-3/4 Cold Chisel. The One-piece construction forged from chrome vanadium steel for increased strength and durability. It is hardened, quenched and tempered for long life and added safety. The powder coat finish is for increased visibility.
2.99
Price: 2.99
|
|
|
| Stanley 47974 16 Oz. Brass Plumb Bob | Fastcap POWER MAG Power Magnets |
 Stanley 47974 is 16 Oz. Brass Plumb Bob. It has a long-lasting, replaceable hardened steel tip. The screw top simplifies attaching string to center of plumb. Through hole ensures easy tightening.Stanley 47974 is 16 Oz. Brass Plumb Bob. It has a long-lasting, replaceable hardened steel tip. The screw top simplifies attaching string to center of plumb. Through hole ensures easy tightening.
10.99
Price: 10.99
|
 The Fastcap POWER MAG is a set of 10 Power Magnets. These high-performance neodymium magnets will transform the way you think about and use magnets. They are versatile and powerful and can be used to make invisible magnetic catches, as well as hold anything and everything to metal.The Fastcap POWER MAG is a set of 10 Power Magnets. These high-performance neodymium magnets will transform the way you think about and use magnets. They are versatile and powerful and can be used to make invisible magnetic catches, as well as hold anything and everything to metal.
10.99
Price: 10.99
|
|
|
| Bosch HCBG20 5/8 inch Industrial Hammer Drill Bit | Bosch RotoZip RZ05-2100 Factory Reconditioned Zip mate Cut-Off Kit, 30000 RPM, 5.0 Amps |
 The Bosch HCBG20 is a 5/8 inch Industrial Hammer Drill Bit. The BlueGranite hammer drill bit deliver fast impact drilling in concrete, stone and masonry. It has low voltage, high temperature brazing which prevents the carbide cutting edge from breaking out even when heat builds up during deep drilling.The Bosch HCBG20 is a 5/8 inch Industrial Hammer Drill Bit. The BlueGranite hammer drill bit deliver fast impact drilling in concrete, stone and masonry. It has low voltage, high temperature brazing which prevents the carbide cutting edge from breaking out even when heat builds up during deep drilling.
9.99
Price: 9.99
|
 The Bosch RotoZip RZ05-2100 Factory Reconditioned Zip mate Cut-Off Kit is the tool that can do it all. The beefy 5 Amps saw in the kit not only saws but also cuts, grinds, sands and polishes. The kit includes a masonry wheel, a metal wheel, a dry diamond wheel, a sabrecut bit, guide point bits in a case, a wrench and a soft tool bag for portability. It is used to cut drywall, bath tile, plywood, cinderblock, PVC pipe or any other building material.The Bosch RotoZip RZ05-2100 Factory Reconditioned Zip mate Cut-Off Kit is the tool that can do it all. The beefy 5 Amps saw in the kit not only saws but also cuts, grinds, sands and polishes. The kit includes a masonry wheel, a metal wheel, a dry diamond wheel, a sabrecut bit, guide point bits in a case, a wrench and a soft tool bag for portability. It is used to cut drywall, bath tile, plywood, cinderblock, PVC pipe or any other building material.
49.99
Price: 49.99
|
|
|
| Bosch HC4521 5/8 inch x 16 inch Spline Shank Bit | Bosch HC5022 5/8 inch x 16 inch SDS Max Shank Wild Bore Bit |
 The Bosch HC4521 is a 5/8 inch x 16 inch Spline Shank Bit. Bosch spline rotary hammer bit is carbide tipped and fit Bosch as well as other spline hammers.The Bosch HC4521 is a 5/8 inch x 16 inch Spline Shank Bit. Bosch spline rotary hammer bit is carbide tipped and fit Bosch as well as other spline hammers.
26.99
Price: 26.99
|
 The Bosch HC5022 is a 5/8 inch x 16 inch SDS Max Shank Wild Bore Bit. Bosch carbide rotary hammer bit features tip that stay sharper longer and deliver more holes within their ANSI specification than competitors bits. Also, Bosch shafts wear at a much slower rate than most others and can take more abuse because of Boschs technologically advanced conditioning process.The Bosch HC5022 is a 5/8 inch x 16 inch SDS Max Shank Wild Bore Bit. Bosch carbide rotary hammer bit features tip that stay sharper longer and deliver more holes within their ANSI specification than competitors bits. Also, Bosch shafts wear at a much slower rate than most others and can take more abuse because of Boschs technologically advanced conditioning process.
34.99
Price: 34.99
|
|
|
| Johnson Level 40-6535 AccuLine Pro Electronic Self-Leveling Horizontal Rotary Laser Level with Detector and Remote | Johnson Level 40-6537 AccuLine Pro Heavy-Duty Electronic Self-Leveling Rotary Laser Level with Beam Shield Technology |
 Automatic-leveling horizontal planeLarge 5 electronic auto-leveling rangeSlope function allows user to perform slope at different inclination in both x and y axisHeight of instrument alarm function ensures product accuracyDust and rain resistant housingRemote power off functionIncluded detector and remote control for convenient operationAutomatic-leveling horizontal planeLarge 5 electronic auto-leveling rangeSlope function allows user to perform slope at different inclination in both x and y axisHeight of instrument alarm function ensures product accuracyDust and rain resistant housingRemote power off functionIncluded detector and remote control for convenient operation
579.99
Price: 579.99
|
 Electronic beam shield to turn the laser beam off from 1-3 quadrants for multiple laser usageReinforced metal roof and glass enclosed beaconElectronic self-leveling and designed for outdoor useVibrate mode ignores slight movements as in windy conditionsElectronically-controlled dual slope featureVisual and audible alarms when beyond leveling rangeElectronic beam shield to turn the laser beam off from 1-3 quadrants for multiple laser usageReinforced metal roof and glass enclosed beaconElectronic self-leveling and designed for outdoor useVibrate mode ignores slight movements as in windy conditionsElectronically-controlled dual slope featureVisual and audible alarms when beyond leveling range
739.99
Price: 739.99
|
|
|
| DeWalt DC385KR Factory Reconditioned 18-Volt Cordless Reciprocating Saw Kit, 0-2900 SPM | DeWalt DC720KB 18-Volt Cordless 1/2-Inch Drill/Driver - Tool Only with Case |
 If you are looking for an ideal wood cutting tool, stop your search at the cordless DeWalt 18 volt reciprocating saw kit. Charged within one hour, this reciprocating saw is ready for its next run in a short time and once its battery gets exhausted - the charger is already available with the saw kit!The one-inch stroke length along with 2900 SPM of this factory reconditioned saw with nano technology makes for quick cutting. The DeWalt DC385K has a keyless blade clamp that enables you to change its blade suiting your application. The ware-tare of the blade is minimized by the electric blade. The blade can be positioned in two ways, giving you the liberty to use it for flush cutting. For better visibility, this reciprocating tool is enhanced with pivoting shoe with open top. All of these features are neatly fixed into a lightweight, compact, and rugged body.If you are looking for an ideal wood cutting tool, stop your search at the cordless DeWalt 18 volt reciprocating saw kit. Charged within one hour, this reciprocating saw is ready for its next run in a short time and once its battery gets exhausted - the charger is already available with the saw kit!The one-inch stroke length along with 2900 SPM of this factory reconditioned saw with nano technology makes for quick cutting. The DeWalt DC385K has a keyless blade clamp that enables you to change its blade suiting your application. The ware-tare of the blade is minimized by the electric blade. The blade can be positioned in two ways, giving you the liberty to use it for flush cutting. For better visibility, this reciprocating tool is enhanced with pivoting shoe with open top. All of these features are neatly fixed into a lightweight, compact, and rugged body.
158.75
Price: 158.75
|
 The DeWalt DC720 is a compact 1/2 drill/driver which provides users with superior ergonomics, better performance and enhanced durability. The DeWalt DC720 offers end-users a dual- speed range of 0-500 and 0-1700 respectively, all packed into 4.8 pounds of compact weight and size. In addition, the DeWalt DC720 has new components including a frameless motor that delivers 410 unit watts of power and all metal planetary gears for enhanced durability. Built in features include a LED light, 1/2 single sleeve ratcheting chuck to reduce bit slippage and onboard bit storage. The DeWalt DC720 is a compact 1/2 drill/driver which provides users with superior ergonomics, better performance and enhanced durability. The DeWalt DC720 offers end-users a dual- speed range of 0-500 and 0-1700 respectively, all packed into 4.8 pounds of compact weight and size. In addition, the DeWalt DC720 has new components including a frameless motor that delivers 410 unit watts of power and all metal planetary gears for enhanced durability. Built in features include a LED light, 1/2 single sleeve ratcheting chuck to reduce bit slippage and onboard bit storage.
99.99
Price: 99.99
|
|
|
| DeWalt DW682K Heavy-Duty Biscuit Plate Joiner with Case, 10000 RPM, 6.5 Amps | DeWalt DW4770 4-Inch Extended Performance Single-Row Diamond Cup Grinding Wheel for Masonry |
 The DeWalt DW682K is a heavy duty biscuit (plate) joiner with case. The rack and pinion control provides precise vertical adjustment and fence alignment, so the risk of making an inaccurate cut is virtually eliminated. Its integral, adjustable fence tilts 0-90 so as to make the cut at exactly the proper angle. For cabinet construction, flush cuts can be made at 0 without having to remove the fence. For fine woodworking, the fence can be located on either the inside or outside face of the mitered joint. This unit includes a 6-tooth carbide blade, dust bag, dust deflector vacuum adapter, torn screwdriver, wrench and carrying case. The DeWalt DW682K is a heavy duty biscuit (plate) joiner with case. The rack and pinion control provides precise vertical adjustment and fence alignment, so the risk of making an inaccurate cut is virtually eliminated. Its integral, adjustable fence tilts 0-90 so as to make the cut at exactly the proper angle. For cabinet construction, flush cuts can be made at 0 without having to remove the fence. For fine woodworking, the fence can be located on either the inside or outside face of the mitered joint. This unit includes a 6-tooth carbide blade, dust bag, dust deflector vacuum adapter, torn screwdriver, wrench and carrying case.
189.00
Price: 189.00
|
 The DeWalt DW4770 4" Diamond Cup Grinding Wheel is designed to be used with angle grinders for quick material removal. The DW4770 has an optimized cutting matrix height for maximum diamond exposure, increasing your productivity. The high concentration of diamond lets you cut faster, easier, and longer. This DW4770 is built to last. If you are looking for superior performance for rough griding, deburring, and fast material removal look no further than the DeWalt DW4770 Diamond Cup Grinding Wheel. The DeWalt DW4770 4" Diamond Cup Grinding Wheel is designed to be used with angle grinders for quick material removal. The DW4770 has an optimized cutting matrix height for maximum diamond exposure, increasing your productivity. The high concentration of diamond lets you cut faster, easier, and longer. This DW4770 is built to last. If you are looking for superior performance for rough griding, deburring, and fast material removal look no further than the DeWalt DW4770 Diamond Cup Grinding Wheel.
54.99
Price: 54.99
|
|
|
| DeWalt DC410 Heavy-Duty 4-1/2 inch 18V Cordless Cut-Off Tool, 6500 RPM - Tool Only | DeWalt DW735 13-Inch Two Speed Portable Planer, 10000 RPM, 15 Amps |
 The DeWalt DC410 is a Heavy-Duty 4-1/2 inch 18V Cordless Cut-Off Tool Tool Only. The tool is designed for quick cutting and light grinding, in tight spaces and areas where power is not available. The DC410 4-1/2 inch cut-off tool just made for cutting easier and more convenient. It is powered by DeWalts 18V system.The DeWalt DC410 is a Heavy-Duty 4-1/2 inch 18V Cordless Cut-Off Tool Tool Only. The tool is designed for quick cutting and light grinding, in tight spaces and areas where power is not available. The DC410 4-1/2 inch cut-off tool just made for cutting easier and more convenient. It is powered by DeWalts 18V system.
79.99
Price: 79.99
|
 The DeWalt DW735 13-Inch two speed portable planer that easily planes wood from oak, walnut, exotics, etc easily using its powerful 15 amperage, 10000 RPM motor. With a one-of-a-kind three knife cutter-head, the 100-pound dewalt planer provides best in class surface finish even on hard to plane figured woods.The portable planer at 96 or 179 cuts per inch produces a quality of finish yet only produced on a bench top thickness planer. With its two speed gear box, users can change feed speed for optimizing cuts per inch. Its three knife cutter-head lasts 30% longer and provides changing any of the three knives quick and simple. With powerful the motor handles larger cuts in wider materials with ease.The planer has a fan-assisted chip ejection system that removes chips and other fine sawdust and exhausts them out of the machine. Its unique automatic carriage lock minimizes movement that causes snipe and prevents unwanted damage to the material. The solid 19-3/4 cast aluminum base of the DeWalt DW735 portable planer provides superior rigidity than conventional base support systems. The planer tool pack comes accessorized with dust hose adapter and dust ejection chute.The DeWalt DW735 13-Inch two speed portable planer that easily planes wood from oak, walnut, exotics, etc easily using its powerful 15 amperage, 10000 RPM motor. With a one-of-a-kind three knife cutter-head, the 100-pound dewalt planer provides best in class surface finish even on hard to plane figured woods.The portable planer at 96 or 179 cuts per inch produces a quality of finish yet only produced on a bench top thickness planer. With its two speed gear box, users can change feed speed for optimizing cuts per inch. Its three knife cutter-head lasts 30% longer and provides changing any of the three knives quick and simple. With powerful the motor handles larger cuts in wider materials with ease.The planer has a fan-assisted chip ejection system that removes chips and other fine sawdust and exhausts them out of the machine. Its unique automatic carriage lock minimizes movement that causes snipe and prevents unwanted damage to the material. The solid 19-3/4 cast aluminum base of the DeWalt DW735 portable planer provides superior rigidity than conventional base support systems. The planer tool pack comes accessorized with dust hose adapter and dust ejection chute.
649.00
Price: 649.00
|
|
|
| DeWalt D51238K Heavy-Duty 18 Gauge 2-Inch Brad Nailer Kit, 70-120 PSI | Altraco MT-06 6 Pc Telescoping Gage Set |
 The DeWalt D51238K is a brad nailer kit that includes a heavy-duty 18 gauge 2" brad nailer, DeWalt safety glasses, Allen wrench, and a kit box. The side-load magazine of this brad nailer can hold up to 110 nails or brads of 5/8, 1, 1 1/4 and 2. This pneumatic brad nailer alerts the user, when the magazine has only 6 nails left, following the countdown till it is empty. The user can see the status in the window and know when it is time to reload.The quite motor of 18 gauge brad nailer delivers 70-120 psi under pressure. The brad nailer can handle various depths, locate the perfect depth setting easily, and has a vertical slide with four indexed positions. The brad nailer gives a neat flush finish in any thickness of material. The 360-degree tool-free adjustable exhaust setting helps to direct the airflow away from the user, in any direction. The safety drive behind the driver in DeWalt D51238K brad nailer allows the user to shoot nails at any angle. With tool-free, front latch jam clearing, it is easy to remove jammed brads from the nosepiece.The over molded no-mar pad of the DeWalt D51238K has low profile rubber that protects the surface of the work material. The trigger lock-off avoids the possibility of dry-firing by disabling the tool when not in use. The safety switch is conveniently placed such that it can be controlled using the same hand with which the user is holding the tool. The DeWalt D51238K is a versatile trim nailer with a lightweight, well-balanced, and compact body helps drive nails even into difficult to reach areas.The DeWalt D51238K is a brad nailer kit that includes a heavy-duty 18 gauge 2" brad nailer, DeWalt safety glasses, Allen wrench, and a kit box. The side-load magazine of this brad nailer can hold up to 110 nails or brads of 5/8, 1, 1 1/4 and 2. This pneumatic brad nailer alerts the user, when the magazine has only 6 nails left, following the countdown till it is empty. The user can see the status in the window and know when it is time to reload.The quite motor of 18 gauge brad nailer delivers 70-120 psi under pressure. The brad nailer can handle various depths, locate the perfect depth setting easily, and has a vertical slide with four indexed positions. The brad nailer gives a neat flush finish in any thickness of material. The 360-degree tool-free adjustable exhaust setting helps to direct the airflow away from the user, in any direction. The safety drive behind the driver in DeWalt D51238K brad nailer allows the user to shoot nails at any angle. With tool-free, front latch jam clearing, it is easy to remove jammed brads from the nosepiece.The over molded no-mar pad of the DeWalt D51238K has low profile rubber that protects the surface of the work material. The trigger lock-off avoids the possibility of dry-firing by disabling the tool when not in use. The safety switch is conveniently placed such that it can be controlled using the same hand with which the user is holding the tool. The DeWalt D51238K is a versatile trim nailer with a lightweight, well-balanced, and compact body helps drive nails even into difficult to reach areas.
69.99
Price: 69.99
|
 For true measurement of hole, slot or recess from 5/16 � 6Plunger expands in hole to be measuredKnurl locks the setting for sizing with micrometer or caliperSatin chrome finishIn plastic folding pouchFor true measurement of hole, slot or recess from 5/16 � 6Plunger expands in hole to be measuredKnurl locks the setting for sizing with micrometer or caliperSatin chrome finishIn plastic folding pouch
16.99
Price: 16.99
|
|
|
| Grip 23017 14' x 3/8Inch Tow Chain | Milwaukee 0721-21 V28 Cordless Right Angle Drill Kit, 0-400/0-1000 RPM |
 Ideal for farmers, truckers, and contractorsNot recommended for overhead liftingGrade 70 industrial strength chain includes two 3/8 clevis grab hooks4000 lb. load limit. 14 ft. long, 3/8 chain.Ideal for farmers, truckers, and contractorsNot recommended for overhead liftingGrade 70 industrial strength chain includes two 3/8 clevis grab hooks4000 lb. load limit. 14 ft. long, 3/8 chain.
29.99
Price: 29.99
|
 Milwaukee 0721-21 is a V28 Cordless Right Angle Drill Kit. This cordless right angle drill is designed for boring large holes between studs or joists or in tight areas. This tool is great for plumbing and electrical applications such as drilling holes to run wire through studs and joists or boring holes in floors for plumbing venting. The tool features an extremely rugged motor and gear train that is capable of handling some of the toughest jobs and is durable enough to withstand job-site abuse. The 0721 features a 1/2 keyed chuck that includes a thick, clear coat finish to help prevent rusting.Milwaukee 0721-21 is a V28 Cordless Right Angle Drill Kit. This cordless right angle drill is designed for boring large holes between studs or joists or in tight areas. This tool is great for plumbing and electrical applications such as drilling holes to run wire through studs and joists or boring holes in floors for plumbing venting. The tool features an extremely rugged motor and gear train that is capable of handling some of the toughest jobs and is durable enough to withstand job-site abuse. The 0721 features a 1/2 keyed chuck that includes a thick, clear coat finish to help prevent rusting.
399.99
Price: 399.99
|
|
|
| Milwaukee 8975-8 Factory Reconditioned Dual Temperature Heat Gun, 11.6 Amps | Milwaukee 49-24-0171 M18 18-Volt Work Light |
 The Milwaukee 8975-8 is a Factory Reconditioned Dual Temperature Heat Gun. The professional line of heat gun offers ergonomic style and powerful heating elements. With stay cool handles and heat shields, user can use these all day while staying cool. It offers 570 and 1000 temperature ranges.The Milwaukee 8975-8 is a Factory Reconditioned Dual Temperature Heat Gun. The professional line of heat gun offers ergonomic style and powerful heating elements. With stay cool handles and heat shields, user can use these all day while staying cool. It offers 570 and 1000 temperature ranges.
49.99
Price: 49.99
|
 The Milwaukee 49-24-0171 is a 18-Volt Work Light. Milwaukee Electric Tool Corporation introduces the new M18 Work Light designed to increase productivity in a compact, lightweight package. The 49-24-0171 utilizes both the 18-Volt Compact Lithium-Ion battery and the 18-Volt XC High Capacity Lithium-Ion battery to provide longer run-time. It features a Xenon incandescent bulb to maximize brightness over work areas, and a convenient fold-away utility hook for hands-free use.Battery and Charger are NOT IncludedThe Milwaukee 49-24-0171 is a 18-Volt Work Light. Milwaukee Electric Tool Corporation introduces the new M18 Work Light designed to increase productivity in a compact, lightweight package. The 49-24-0171 utilizes both the 18-Volt Compact Lithium-Ion battery and the 18-Volt XC High Capacity Lithium-Ion battery to provide longer run-time. It features a Xenon incandescent bulb to maximize brightness over work areas, and a convenient fold-away utility hook for hands-free use.Battery and Charger are NOT Included
44.99
Price: 44.99
|
|
|
| Milwaukee 0928-89 Factory Reconditioned Lithium-Ion 28V Cordless 4-Tool Combo Kit | Liberty� 7270 Gray Welder Glove (Large) |
 The Milwaukee 0928-89R is a Factory Reconditioned Lithium-Ion 28V Cordless 4-Tool Combo Kit. The 0928-29 features the revolutionary 28V Lithium-Ion battery pack exclusively from Milwaukee. The 28V battery pack weighs less than an 18V pack yet delivers two times the run-time making this the ideal solution for all cutting, drilling and driving needs. The Milwaukee 0724 28V 1/2 hammer drill uses the Milwaukee built high power motor to develop an enormous 600 in-lbs of maximum torque and 0 to 600/0 to 1800 RPM. The 0724 comes standard with a 1/2, all-metal, single-sleeve ratcheting chuck with all carbide jaws that keeps bits from falling out and drill bits from slipping. A comfortable non-slip, soft-grip handle reduces vibration and fatigue. The 0719 28V sawzall reciprocating saw produces an amazing two times the runtime of 18V reciprocating saws. The 0730 6-1/2 circular saw has the most power of any cordless circular saw, enough to cut over 300 2 x 4s on a single charge. The 0730 has a left-side blade for increased cut-line visibility, 4200 RPM for extremely fast cutting, 50 bevel capacity and all-metal blade guards. The 49-24-0185 work light features a high intensity Xenon bulb, is Clip-Lok System compatible and delivers over 5 hours of run-time on a single battery. The Milwaukee 0928-89R is a Factory Reconditioned Lithium-Ion 28V Cordless 4-Tool Combo Kit. The 0928-29 features the revolutionary 28V Lithium-Ion battery pack exclusively from Milwaukee. The 28V battery pack weighs less than an 18V pack yet delivers two times the run-time making this the ideal solution for all cutting, drilling and driving needs. The Milwaukee 0724 28V 1/2 hammer drill uses the Milwaukee built high power motor to develop an enormous 600 in-lbs of maximum torque and 0 to 600/0 to 1800 RPM. The 0724 comes standard with a 1/2, all-metal, single-sleeve ratcheting chuck with all carbide jaws that keeps bits from falling out and drill bits from slipping. A comfortable non-slip, soft-grip handle reduces vibration and fatigue. The 0719 28V sawzall reciprocating saw produces an amazing two times the runtime of 18V reciprocating saws. The 0730 6-1/2 circular saw has the most power of any cordless circular saw, enough to cut over 300 2 x 4s on a single charge. The 0730 has a left-side blade for increased cut-line visibility, 4200 RPM for extremely fast cutting, 50 bevel capacity and all-metal blade guards. The 49-24-0185 work light features a high intensity Xenon bulb, is Clip-Lok System compatible and delivers over 5 hours of run-time on a single battery.
529.99
Price: 529.99
|
 Gray regular shoulder leather, cotton thread sewn, full sock lined, and wing thumbSize Large Gray regular shoulder leather, cotton thread sewn, full sock lined, and wing thumbSize Large
5.99
Price: 5.99
|
|
|
| Porter-Cable 513 Heavy-Duty Lock Mortiser, 23000 RPM, 1-1/2 HP | Porter-Cable 7310 Laminate Trim Router, 30000 RPM, 5.6 Amps |
 Porter-Cable 513 is a 1-1/2 HP Heavy-Duty Lock Mortiser. This tool helps in quick and accurate cutting of mortises for box locks. It cuts mortises up to 7 inch long, 1-1/4 inch wide, 4-3/4 inch deep.Porter-Cable 513 is a 1-1/2 HP Heavy-Duty Lock Mortiser. This tool helps in quick and accurate cutting of mortises for box locks. It cuts mortises up to 7 inch long, 1-1/4 inch wide, 4-3/4 inch deep.
999.99
Price: 999.99
|
 The Porter-Cable 7310 is a laminate trim router. It has 100% ball bearing construction for durability and smooth operation and a metal lower motor housing for heat dissipation. A powerful 5.6 Amps AC/DC motor turns 30000 RPM to make quick work of trimming tasks. A built-in spindle lock and flat-top design allow for quick and easy one-wrench bit changes. The 1/4 inch collets accepts laminate trimming bits as well as router bits. Precise bit depth adjustments are easy with the Micro-set adjustment knob.The Porter-Cable 7310 is a laminate trim router. It has 100% ball bearing construction for durability and smooth operation and a metal lower motor housing for heat dissipation. A powerful 5.6 Amps AC/DC motor turns 30000 RPM to make quick work of trimming tasks. A built-in spindle lock and flat-top design allow for quick and easy one-wrench bit changes. The 1/4 inch collets accepts laminate trimming bits as well as router bits. Precise bit depth adjustments are easy with the Micro-set adjustment knob.
109.99
Price: 109.99
|
|
|
| Porter-Cable 352VS Factory Reconditioned 3 inch x 21 inch Variable Speed Belt Sander, 850-1300 SFPM, 8.0 Amps | Porter-Cable 698 Router Table without Motor |
 The Porter-Cable 352VS is a Factory Reconditioned 3 inch x 21 inch Variable Speed Belt Sander with Dust Bag. The motor is located over platen for maximum performance and perfect balance. The tool is designed for flush sanding up to vertical surfaces for versatility. The Porter-Cable 352VS is a Factory Reconditioned 3 inch x 21 inch Variable Speed Belt Sander with Dust Bag. The motor is located over platen for maximum performance and perfect balance. The tool is designed for flush sanding up to vertical surfaces for versatility.
149.99
Price: 149.99
|
 The Porter-Cable 698 is a Router Table without Motor. The table top is machined aluminum, lightweight but stable and measures out at a pretty generous 19-3/4 by 16-3/4 inches with a 3/4 inch miter gauge slot. There are two starter pin positions for folks who like to use them. As on most tables this size, the fence is a split design and while that has its detractors. Each section adjusts smoothly, giving flexibility in both front-to-back and lateral positioning. The table hole is large enough for a 3-1/2 inch bit and two inserts are included one with a large opening, the other small. The legs are a tad over a foot high, plenty of room for most routers and theyre wide and sturdy with predrilled holes on the bottom flanges. The Porter-Cable 698 is a Router Table without Motor. The table top is machined aluminum, lightweight but stable and measures out at a pretty generous 19-3/4 by 16-3/4 inches with a 3/4 inch miter gauge slot. There are two starter pin positions for folks who like to use them. As on most tables this size, the fence is a split design and while that has its detractors. Each section adjusts smoothly, giving flexibility in both front-to-back and lateral positioning. The table hole is large enough for a 3-1/2 inch bit and two inserts are included one with a large opening, the other small. The legs are a tad over a foot high, plenty of room for most routers and theyre wide and sturdy with predrilled holes on the bottom flanges.
179.99
Price: 179.99
|
|
|
| Porter-Cable PIN23100 23 Gauge 1 inches Pin Nails (2000 Pack) | Porter-Cable 42186 Router Sub-Base |
 1 inches long23 gauge pin nailsPackage of 2000Bottom load magazine holds 170 pin micro nails 1 inches long23 gauge pin nailsPackage of 2000Bottom load magazine holds 170 pin micro nails
6.99
Price: 6.99
|
 The Porter-Cable 42186 is a router sub-base. The Porter-Cable sub-base is the standard replacement for Porter-Cable routers with 5-3/4 inch sub bases. The center hole is 1-1/8 inch in diameter and accepts Porter-Cable template guides. It fits current and past models including 100, 690, 691, 693, 9690 and 693PK. The Porter-Cable 42186 is a router sub-base. The Porter-Cable sub-base is the standard replacement for Porter-Cable routers with 5-3/4 inch sub bases. The center hole is 1-1/8 inch in diameter and accepts Porter-Cable template guides. It fits current and past models including 100, 690, 691, 693, 9690 and 693PK.
8.99
Price: 8.99
|
|
|
| Porter-Cable 43763PC 1/4-Inch Double Roman Ogee Router Bit | Porter-Cable 54741 7 inch Hook & Loop Polishing Bonnet for 7401 & 7428 Polishers |
 The Porter-Cable 43763PC is a 1/4 inch Double Roman Ogee Router Bit. It is used for forming decorative edges on projects such as molding, furniture and shelving. The Porter-Cable 43763PC is a 1/4 inch Double Roman Ogee Router Bit. It is used for forming decorative edges on projects such as molding, furniture and shelving.
10.77
Price: 10.77
|
 The Porter-Cable 54741 is a 7 inch Hook & Loop Polishing Bonnet for 7401 & 7428 Polishers. The Porter-Cable 54741 polishing pad is used to polish painted surfaces, metals and other materials. The hook and loop surface mounts easily onto a 7 inch power polisher with a hook and loop back-up pad which eliminates clamping, bending and tucking. The Porter-Cable 54741 fits Porter-Cable 7401 and 7428 Polishers. The Porter-Cable 54741 is a 7 inch Hook & Loop Polishing Bonnet for 7401 & 7428 Polishers. The Porter-Cable 54741 polishing pad is used to polish painted surfaces, metals and other materials. The hook and loop surface mounts easily onto a 7 inch power polisher with a hook and loop back-up pad which eliminates clamping, bending and tucking. The Porter-Cable 54741 fits Porter-Cable 7401 and 7428 Polishers.
12.99
Price: 12.99
|
|
|
| Porter-Cable 59381 Hinge Butt Template Kit | Delta 17-924 Mortising Attachment (Drill Press) with 4 Chisel and Bit Set Contains 1/4 inch, 5/16 inch, 3/8 inch and 1/2 inch |
 The Porter-Cable 59381 is a Hinge Butt Template Kit. The hinge butt template is easy to operate and permits mortising of a door and jamb from 78 to 84 inches long. It assures perfect matching of hinge locations on door and jamb. The hinge template can be adjusted for cutting 3- to 6 inches mortises for common hinge sizes. The Porter-Cable 59381 is a Hinge Butt Template Kit. The hinge butt template is easy to operate and permits mortising of a door and jamb from 78 to 84 inches long. It assures perfect matching of hinge locations on door and jamb. The hinge template can be adjusted for cutting 3- to 6 inches mortises for common hinge sizes.
269.99
Price: 269.99
|
 The Delta 17-924 Mortising attachment comes with four popular mortising chisel and bit sets plus a handy carrying case that holds everything for easy storage. It offers large 4 inch capacity under hold-downs; 2-3/4 inch from ends of hood rods to fence. Also fits drill presses with quill diameters of 66 mm, 50.8 mm, 48 mm and 38 mm. The Delta 17-924 Mortising attachment comes with four popular mortising chisel and bit sets plus a handy carrying case that holds everything for easy storage. It offers large 4 inch capacity under hold-downs; 2-3/4 inch from ends of hood rods to fence. Also fits drill presses with quill diameters of 66 mm, 50.8 mm, 48 mm and 38 mm.
89.99
Price: 89.99
|
|
|
| |
|
|
