|
| |
|
| OTC 7394 Universal Hub Puller | SPX OTC1170 Pilot Bearing Puller |
 The OTC 7394 is a Universal Hub Puller. It has readily adjustable sliding arms to pull wheel hubs quickly and easily. Its maximum reach is 7-1/2 bolt circle. The puller provides a straight pull and will not distort wheel lugs. Five legs should be used on Cadillac and Jeep hubs.The OTC 7394 is a Universal Hub Puller. It has readily adjustable sliding arms to pull wheel hubs quickly and easily. Its maximum reach is 7-1/2 bolt circle. The puller provides a straight pull and will not distort wheel lugs. Five legs should be used on Cadillac and Jeep hubs.
119.99
Price: 119.99
|
 SPX OTC1170 is a pilot bearing puller. It is specially used for inside pulling jobs and particularly for removing flywheel pilot bearings on automobiles, trucks and tractors & also very practical for pulling motor, generator and magneto bearing.SPX OTC1170 is a pilot bearing puller. It is specially used for inside pulling jobs and particularly for removing flywheel pilot bearings on automobiles, trucks and tractors & also very practical for pulling motor, generator and magneto bearing.
64.99
Price: 64.99
|
|
|
| SPX OTC1179 8-Way Slide Hammer Set | SPX OTC4485 Spot Weld Cutter Set |
 The SPX OTC1179 is a 8-Way Slide Hammer Set. The tool can pull flange-type rear axles, remove stubborn oil seals and bearings and other press-fit parts. Puller jaws can be set up for 2/3 jaw internal or external pulling jobs.The SPX OTC1179 is a 8-Way Slide Hammer Set. The tool can pull flange-type rear axles, remove stubborn oil seals and bearings and other press-fit parts. Puller jaws can be set up for 2/3 jaw internal or external pulling jobs.
109.99
Price: 109.99
|
 The OTC4485 is a spot weld cutter set. It is used with electric drill or air drill to cut 5/16 and 3/8 spot welds. Cutter bits have cutting teeth on each end.The OTC4485 is a spot weld cutter set. It is used with electric drill or air drill to cut 5/16 and 3/8 spot welds. Cutter bits have cutting teeth on each end.
29.99
Price: 29.99
|
|
|
| SPX OTC4589 Disc Brake Piston Cube | SPX OTC4602 2-Pc Brass Punch Set |
 The SPX OTC4589 is a Disc Brake Piston Cube. The piston cube tool rotates pistons back into brake calipers when replacing brake pads on vehicles with rear wheel disc brakes. Tool has 3/8 square drive which provides six drive pin configurations to fit most cars and light trucks. It is an updated version which fits more applications than many competitors.The SPX OTC4589 is a Disc Brake Piston Cube. The piston cube tool rotates pistons back into brake calipers when replacing brake pads on vehicles with rear wheel disc brakes. Tool has 3/8 square drive which provides six drive pin configurations to fit most cars and light trucks. It is an updated version which fits more applications than many competitors.
5.99
Price: 5.99
|
 The SPX OTC4602 is a 2-Pc Brass Punch Set. The set has two large, brass non-sparking punches are ideal for use near precision parts or in locations where sparks from ferrous metal could be hazardous. It includes an 8 punch (5/8 hex, tapered to 3/8) and 10 straight punch (3/4 diameter, chamfered at both ends). The SPX OTC4602 is a 2-Pc Brass Punch Set. The set has two large, brass non-sparking punches are ideal for use near precision parts or in locations where sparks from ferrous metal could be hazardous. It includes an 8 punch (5/8 hex, tapered to 3/8) and 10 straight punch (3/4 diameter, chamfered at both ends).
24.99
Price: 24.99
|
|
|
| SPX OTC 4645 Serpentine Belt Tool Set | OTC 4676 Windshield Wiper Puller |
 Fits tensioner pulleys with 13mm-16mm, 18mm hex or 3/8 and 1/2 square drives.For hard to access tensioners; there are 13mm and 15mm 12-point wrenches built into the handle.Fits tensioner pulleys with 13mm-16mm, 18mm hex or 3/8 and 1/2 square drives.For hard to access tensioners; there are 13mm and 15mm 12-point wrenches built into the handle.
34.99
Price: 34.99
|
 The OTC 4676 is a Windshield Wiper Puller that works to remove wiper arms on many foreign and domestic cars and light trucks. Unlike other methods, the OTC 4676 Windshield Wiper Puller will not damage the wiper arm or the hood cowling during removal.The OTC 4676 is a Windshield Wiper Puller that works to remove wiper arms on many foreign and domestic cars and light trucks. Unlike other methods, the OTC 4676 Windshield Wiper Puller will not damage the wiper arm or the hood cowling during removal.
10.99
Price: 10.99
|
|
|
| OTC 6497 Super-Duty Pitman Arm Puller/Tie Rod End Puller | SPX OTC7080 Ball Joint Spanner Wrench |
 The OTC 6497 is a Super-Duty Pitman Arm Puller/Tie Rod End Puller. The OTC 6497 works on 2005 and newer Ford F-250 and F-350 four-wheel drive super-duty trucks. The Pitman arm can be removed from the steering gear while the steering gear is still in the vehicle. Two clamp bolts lock the jaws on the Pitman arm, ensuring a solid grip.The OTC 6497 is a Super-Duty Pitman Arm Puller/Tie Rod End Puller. The OTC 6497 works on 2005 and newer Ford F-250 and F-350 four-wheel drive super-duty trucks. The Pitman arm can be removed from the steering gear while the steering gear is still in the vehicle. Two clamp bolts lock the jaws on the Pitman arm, ensuring a solid grip.
89.99
Price: 89.99
|
 The SPX OTC7080 is a Ball Joint Spanner Wrench. It is designed for removal and installation of ball joint adjusting sleeves on 1/5, 3/4 and 1 ton Dana open yoke front axles found on Ford, GM, Chrysler, IHC and Jeep 4WD vehicles. Tool permits easy torque with 1 socket for proper upper ball joint preload.The SPX OTC7080 is a Ball Joint Spanner Wrench. It is designed for removal and installation of ball joint adjusting sleeves on 1/5, 3/4 and 1 ton Dana open yoke front axles found on Ford, GM, Chrysler, IHC and Jeep 4WD vehicles. Tool permits easy torque with 1 socket for proper upper ball joint preload.
24.99
Price: 24.99
|
|
|
| Bostitch CPACK3 Factory Reconditioned Nailer, Stapler, and Compressor Combo Kit | Bostitch SB-150SX Factory Reconditioned Industrial 1-1/2Inch Finish Stapler Kit, 18 Gauge |
 The Bostitch CPACK3 is a factory reconditioned 3-Tool Finish & Trim Combo Kit that includes pneumatic tools such as a finish nailer, a brad nailer, a finish stapler, and an air compressor. The kit also includes an air hose, and canvas tool bag. The compressor in the Bostitch CPACK3 has heavy-duty motor with 2HP power at the peak, and otherwise smoothly works at 1.5 HP, delivering 3.4 CFM @ 40 PSI and 2.1 CFM @ 90 PSI and maximum 135 PSI. This nailer comperssor has a tank capacity of 6 gallons and oil-free pump that requires no maintenance. The 16-gauge straight finish nailer can drive 1" - 2-1/2" nails into toughest material. Moreover, it has a fast release nose to reduce downtime in case of jams. The 18-gauge brad nailer is designed to drive brads varying from 5/8" to 1-1/4". The narrow crown stapler is an 18-gauge tool that can drive 7/32" crown SX staples from �" to 1". All three tools feature tool-free adjustable exhaust to direct the air away from the user. The non-mar tip protects the surface of the material. The adjustable depth guide of the staler nailer enables the user to easily set the nail depth as required by the application. The housing of the tool in the Bostitch CPACK3 is made from aluminum, which is a lightweight and durable material.The Bostitch CPACK3 is a factory reconditioned 3-Tool Finish & Trim Combo Kit that includes pneumatic tools such as a finish nailer, a brad nailer, a finish stapler, and an air compressor. The kit also includes an air hose, and canvas tool bag. The compressor in the Bostitch CPACK3 has heavy-duty motor with 2HP power at the peak, and otherwise smoothly works at 1.5 HP, delivering 3.4 CFM @ 40 PSI and 2.1 CFM @ 90 PSI and maximum 135 PSI. This nailer comperssor has a tank capacity of 6 gallons and oil-free pump that requires no maintenance. The 16-gauge straight finish nailer can drive 1" - 2-1/2" nails into toughest material. Moreover, it has a fast release nose to reduce downtime in case of jams. The 18-gauge brad nailer is designed to drive brads varying from 5/8" to 1-1/4". The narrow crown stapler is an 18-gauge tool that can drive 7/32" crown SX staples from �" to 1". All three tools feature tool-free adjustable exhaust to direct the air away from the user. The non-mar tip protects the surface of the material. The adjustable depth guide of the staler nailer enables the user to easily set the nail depth as required by the application. The housing of the tool in the Bostitch CPACK3 is made from aluminum, which is a lightweight and durable material.
219.99
Price: 219.99
|
 The Bostitch SB-150SX is a Factory Reconditioned Industrial 1-1/2, 18 gauge Finish Stapler Kit. It has bottom load magazine for fast loading and easy jam clearing and has adjustable deflector which conveniently directs exhaust. The No-mar tip protects work surface.The Bostitch SB-150SX is a Factory Reconditioned Industrial 1-1/2, 18 gauge Finish Stapler Kit. It has bottom load magazine for fast loading and easy jam clearing and has adjustable deflector which conveniently directs exhaust. The No-mar tip protects work surface.
59.99
Price: 59.99
|
|
|
| Big Horn 19650 Drawer Pull Jig | Pull'R Holdings 06400 Tool Boss Vertical Tool Organizer w/Gatemouth |
 -The Big Horn 19650 is a Drawer Pull Jig. It precisely marks position for drawer pulls and center line. Choose boring width needed and position wooden guide for correct spacing and lock. Align jig over center line & mark holes and remove jig and drill. The jig measures 7 wide by 6 tall.-The Big Horn 19650 is a Drawer Pull Jig. It precisely marks position for drawer pulls and center line. Choose boring width needed and position wooden guide for correct spacing and lock. Align jig over center line & mark holes and remove jig and drill. The jig measures 7 wide by 6 tall.
12.99
Price: 12.99
|
 -The latest addition to the BucketBoss product mix! The New ToolBoss combines a Bucket Tool Organizer & the convenience of a Gatemouth Tool Bag. It is constructed of a 600 denier poly fabric for durability and wear. Features dual side Zippered Flap covered Tool Pockets. A rubber bottom keeps your tools dry when the ToolBoss is set on a wet area & provides stability. Comes with a rubber grip for easy handling.-The latest addition to the BucketBoss product mix! The New ToolBoss combines a Bucket Tool Organizer & the convenience of a Gatemouth Tool Bag. It is constructed of a 600 denier poly fabric for durability and wear. Features dual side Zippered Flap covered Tool Pockets. A rubber bottom keeps your tools dry when the ToolBoss is set on a wet area & provides stability. Comes with a rubber grip for easy handling.
42.99
Price: 42.99
|
|
|
| Pull�R Holding 54045 Bucket Boss Rear Guard Tooth Sheath | Performance W1160A 25-Piece 1/2� Dr. Socket Set |
 The PullR Holding 54045 is Bucket Boss Rear Guard Tooth Sheath. The padded and reinforced pouch easily slips into back pants pocket. 4 front pockets hold tools, pencils, wallet and more. The clip loop attaches tape roll and keys. It is abrasion-resistant material. Snap loop secures to belt or bag handle. Creates a mini tool belt.The PullR Holding 54045 is Bucket Boss Rear Guard Tooth Sheath. The padded and reinforced pouch easily slips into back pants pocket. 4 front pockets hold tools, pencils, wallet and more. The clip loop attaches tape roll and keys. It is abrasion-resistant material. Snap loop secures to belt or bag handle. Creates a mini tool belt.
7.99
Price: 7.99
|
 Ratchet, speeder handle, extension bar and spark plug socket 15 SAE sockets 3/8" - 7/8”; 5 Metric sockets 10mm - 16mm Storage case Ratchet, speeder handle, extension bar and spark plug socket 15 SAE sockets 3/8" - 7/8”; 5 Metric sockets 10mm - 16mm Storage case
17.99
Price: 17.99
|
|
|
| Performance Large Dent Puller | Performance W3939 2-1/2Inch Drill Press Vise |
 Sliding hammer style puller Screw adaptor tips included Sliding hammer style puller Screw adaptor tips included
14.99
Price: 14.99
|
 The Performance W3939 is a 2-1/2" Drill Press Vise. The drill press vises feature sturdy construction and etched 2-1/2" jaws for a secure grip. The slotted mounting holes allow for quick easy vise alignment adjustments.The Performance W3939 is a 2-1/2" Drill Press Vise. The drill press vises feature sturdy construction and etched 2-1/2" jaws for a secure grip. The slotted mounting holes allow for quick easy vise alignment adjustments.
10.99
Price: 10.99
|
|
|
| Bench Dog 40-300 ProMax Complete Router Table Receives $100.00 by Mail- in Rebate (exp. 6-30-09) | Performance W32328 1/2Inch Drive 7/8Inch 6-Point Deep Socket |
Bench Dog provides a solid, sturdy base that is more important than ever considering the new cast-iron ProMaxRT weighs almost 100 pounds. Complete with bolt and cross-dowel construction, it can support even the biggest tops. With a 4" dust port located in the back of the cabinet, dust and debris stay out of the way. Combined with pullout router bit shelves, space for adding cabinet doors or drawers, and a wealth of additional storage options, the 24-3/4" wide x 19-1/4" deep x 33-1/2" tall ProMax Baltic Birch Base packs everything you need into one professional system. Bench Dog provides a solid, sturdy base that is more important than ever considering the new cast-iron ProMaxRT weighs almost 100 pounds. Complete with bolt and cross-dowel construction, it can support even the biggest tops. With a 4" dust port located in the back of the cabinet, dust and debris stay out of the way. Combined with pullout router bit shelves, space for adding cabinet doors or drawers, and a wealth of additional storage options, the 24-3/4" wide x 19-1/4" deep x 33-1/2" tall ProMax Baltic Birch Base packs everything you need into one professional system.
840.00
Price: 840.00
|
 Heat treated alloy steel Drop forged for strength Polished chrome plated finish 3/8 drive. 7/8 6-point deep socket. Heat treated alloy steel Drop forged for strength Polished chrome plated finish 3/8 drive. 7/8 6-point deep socket.
4.99
Price: 4.99
|
|
|
| Performance Mechanics' W54004 2-Shelf Utility Cart w/Locking Drawer | Jet 414457 / HBS-56S 5Inch X 6Inch Swivel Band Saw with Hydraulic Downfeeder, 80-200 SFPM, 1/2 HP |
 -16 gauge steel construction-2 swivel casters-Shelf dimensions 28 X 16 x 3-1/2 deep-16 gauge steel construction-2 swivel casters-Shelf dimensions 28 X 16 x 3-1/2 deep
99.99
Price: 99.99
|
 The Jet 414457 / HBS-56S is a 5 X 6 Swivel Band Saw with Hydraulic Downfeeder. It has an unique design which features a swivel-head for miter cutting structurals, pipe and tubing. Large, easy-to-read scale for positioning saw head. The quick-positioning vise lessens set-up time and has a large handwheel and built-in gauge for easy blade tensioning.The Jet 414457 / HBS-56S is a 5 X 6 Swivel Band Saw with Hydraulic Downfeeder. It has an unique design which features a swivel-head for miter cutting structurals, pipe and tubing. Large, easy-to-read scale for positioning saw head. The quick-positioning vise lessens set-up time and has a large handwheel and built-in gauge for easy blade tensioning.
659.00
Price: 659.00
|
|
|
| Polishmaster 00046 Fleece Bonnet | Columbian 33153 3Inch Bench Vise with 2.5Inch Opening |
 -Polishmaster 00046 Fleece Bonnet. These bonnets will fit right over your foam pads. Use them to remove wax, polish, or sealants. These bonnets will reduce labor time and produce an even deeper and wetter shine. -Polishmaster 00046 Fleece Bonnet. These bonnets will fit right over your foam pads. Use them to remove wax, polish, or sealants. These bonnets will reduce labor time and produce an even deeper and wetter shine.
3.99
Price: 3.99
|
 Columbian 33153 3" Bench Vise with 2.5" Opening is portable and compact for light work in the home, garage or shop. Its cast iron body has cast in pipe jaws and double steel guide bars. This clamp has a swivel base and a built-in anvil. Columbian 33153 3" Bench Vise with 2.5" Opening is portable and compact for light work in the home, garage or shop. Its cast iron body has cast in pipe jaws and double steel guide bars. This clamp has a swivel base and a built-in anvil.
39.99
Price: 39.99
|
|
|
| Wilton 34453 Spindle Sander Sleeve Large Set | Powermatic 1660750K Model 66 10Inch Left Tilt Cabinet Saw with 50Inch Acc-Fence, 5 HP, 3 Phase, 208/230V |
 The Wilton 34453 is a set of six large 120 Grit Spindle Sander Sleeves. These spindle sander sleeves are all 4-1/2 Inches in length, designed for use with the Wilton 99179 Oscillating Spindle Sander.The Wilton 34453 is a set of six large 120 Grit Spindle Sander Sleeves. These spindle sander sleeves are all 4-1/2 Inches in length, designed for use with the Wilton 99179 Oscillating Spindle Sander.
4.99
Price: 4.99
|
 The Powermatic 1660750K is a 10 Left Tilt Cabinet Saw. The left tilting blade prevents stock from binding between the blade and fence, substantially reducing the possibility of kickback. Left tilting blade also aids in making clean mitre cuts leaving any tear-out on the bottom side of the workpiece. It features wide stanced, heavy-duty, one-piece trunnion which has a C-flange mount, relieving weight at the saw arm pivot shaft and promoting easier raising and tilting of saw blade. The Exclusive 3VX-belt drive distributes torque more efficiently and generates less heat while operating virtually vibration-free. The Powermatic 1660750K is a 10 Left Tilt Cabinet Saw. The left tilting blade prevents stock from binding between the blade and fence, substantially reducing the possibility of kickback. Left tilting blade also aids in making clean mitre cuts leaving any tear-out on the bottom side of the workpiece. It features wide stanced, heavy-duty, one-piece trunnion which has a C-flange mount, relieving weight at the saw arm pivot shaft and promoting easier raising and tilting of saw blade. The Exclusive 3VX-belt drive distributes torque more efficiently and generates less heat while operating virtually vibration-free.
3199.99
Price: 3199.99
|
|
|
| Powermatic 1791288K HPS126 12-16Inch Horizontal Panel Scoring Saw, 7-1/2 HP, 3 Phase, 230V | Powermatic 1791309 720HD Heavy-Duty Mortiser, 1725 RPM, 1-1/2 HP |
 The Powermatic 1791288K is a 12-16 Horizontal Panel Scoring Saw. The machine features a generous size sliding carriage assembly that travels effortlessly on precision ball bearings guided by hardened and ground support rods. Heavy walled extrusions on both the slider and support beam eliminate distortion and twist found on some machines. All carriage parts are hard anodized to prevent marring of the workpiece and insuring the life of the parts. The main table of cast iron supports the rugged rip fence, which locks on a solid steel guide bar. The rip fence features a dual position fence body and has a micro-adjust for precise cuts. The main saw unit consists of massive steel plate that carries the main and scoring motors. All rise/fall and tilting controls are fully enclosed to prevent dust contamination. Blades and riving knives are shrouded under the table and have dust collection and blade brushes to minimize nuisance dust. The Powermatic 1791288K is a 12-16 Horizontal Panel Scoring Saw. The machine features a generous size sliding carriage assembly that travels effortlessly on precision ball bearings guided by hardened and ground support rods. Heavy walled extrusions on both the slider and support beam eliminate distortion and twist found on some machines. All carriage parts are hard anodized to prevent marring of the workpiece and insuring the life of the parts. The main table of cast iron supports the rugged rip fence, which locks on a solid steel guide bar. The rip fence features a dual position fence body and has a micro-adjust for precise cuts. The main saw unit consists of massive steel plate that carries the main and scoring motors. All rise/fall and tilting controls are fully enclosed to prevent dust contamination. Blades and riving knives are shrouded under the table and have dust collection and blade brushes to minimize nuisance dust.
13999.99
Price: 13999.99
|
 Powermatic 1791309 is a Heavy-Duty Mortiser. It has a Heavy-duty cast iron construction and a powerful 1-1/2 HP motor for the most demanding jobs. This Mortiser has a three spring loaded adjustable position handles. Its head con move left to right and forward and back with the spring loaded adjustable position handles. Powermatic 1791309 is a Heavy-Duty Mortiser. It has a Heavy-duty cast iron construction and a powerful 1-1/2 HP motor for the most demanding jobs. This Mortiser has a three spring loaded adjustable position handles. Its head con move left to right and forward and back with the spring loaded adjustable position handles.
2249.99
Price: 2249.99
|
|
|
| Chicago Pneumatic QRS5.0HPD-1 5HP Quiet Rotary Screw Air Compressor with Air Dryer (1 phase) | Chicago Pneumatic 7255 Red 3/16-Inch Orbit 6-Inch Random Orbit Palm Sander |
 5-Year/20,000 Hour Extended Warranty Available Learn MoreQuiet by design with a low sound enclosure and innovative cooling fan, the CPs QRS series offers the lowest noise levels available. Exceptional performance combined with efficient rotary screw technology and a high efficiency TEFC motor, the QRS offers low energy consumption, reducing your monthly electric bill. With its compact space saving design and quiet operation, the QRS series can easily be installed just about anywhere in the shop. With its simple compression concept and continuous contact cooling, the QRS series can operate fully loaded-24 hours a day / 7 days a week. There are no wearing parts, the CP QRS offers increased reliability, reduced maintenance and trouble-free operation. No need to worry about rings, valves, rod inserts, bushings and pistons. Extended service intervals save time and money. Convent service panel with easy access to internal components. 5-Year/20,000 Hour Extended Warranty Available Learn MoreQuiet by design with a low sound enclosure and innovative cooling fan, the CPs QRS series offers the lowest noise levels available. Exceptional performance combined with efficient rotary screw technology and a high efficiency TEFC motor, the QRS offers low energy consumption, reducing your monthly electric bill. With its compact space saving design and quiet operation, the QRS series can easily be installed just about anywhere in the shop. With its simple compression concept and continuous contact cooling, the QRS series can operate fully loaded-24 hours a day / 7 days a week. There are no wearing parts, the CP QRS offers increased reliability, reduced maintenance and trouble-free operation. No need to worry about rings, valves, rod inserts, bushings and pistons. Extended service intervals save time and money. Convent service panel with easy access to internal components.
4899.99
Price: 4899.99
|
 The Chicago Pneumatic 7255 is a Red 6-Inch Random Orbit Palm Sander with a 3/16-Inch Orbit. With a powerful low vibration 160 watt motor this sander makes all your sanding applications easy.The Chicago Pneumatic 7255 is a Red 6-Inch Random Orbit Palm Sander with a 3/16-Inch Orbit. With a powerful low vibration 160 watt motor this sander makes all your sanding applications easy.
149.99
Price: 149.99
|
|
|
| Chicago Pneumatic CP858 Belt Sander, 18000 RPM, 11 CFM | Makita 4324 Factory Reconditioned Variable Speed Orbital Jig Saw, 500-3100 SPM, 3.7 Amps |
 -10 mm belt capacity with quick change belt replacement -Adjustable sanding arm -Handle exhaust -Excellent for paint removal, weld sanding, smoothing and rust removal -10 mm belt capacity with quick change belt replacement -Adjustable sanding arm -Handle exhaust -Excellent for paint removal, weld sanding, smoothing and rust removal
189.99
Price: 189.99
|
 The Makita 4324 factory reconditioned versatile jig saw has three orbital settings plus straight cutting functions for working with an assortment of materials. It features variable speed (500-3100 SPM) for consistency and control and speed dial for setting maximum cutting speed. The saw bevel cuts up to 45 right or left and has positive stops at 90 and 45. Other features include a large trigger switch for predictable control, a lock-on button for long jobs and a vacuum port for connecting to a Makita vacuum.The Makita 4324 factory reconditioned versatile jig saw has three orbital settings plus straight cutting functions for working with an assortment of materials. It features variable speed (500-3100 SPM) for consistency and control and speed dial for setting maximum cutting speed. The saw bevel cuts up to 45 right or left and has positive stops at 90 and 45. Other features include a large trigger switch for predictable control, a lock-on button for long jobs and a vacuum port for connecting to a Makita vacuum.
39.99
Price: 39.99
|
|
|
| Makita 7104L Chain Mortiser, 3200 RPM, 12.0 Amps | Makita BJV180Z 18V Lithium-Ion Cordless Jig Saw - Tool Only |
 The Makita 7104L is a 12 Amp Chain Mortiser. Perfect for the timber framing and log home industries, this innovative power tool notches and/or cuts through-holes in thick wood stock quickly, neatly and accurately. Extremely portable with its built-in carrying handle and 37.4 lb weight. The powerful 12 amp motor can easily handle any size job and the externally accessible brushes makes service quick and easy. Equipped with a standard 23/32-Inch (18.25mm) Cutter Chain, you can max cut up to 12-1/8 Inch wide and 6-1/8 Inch deep. Five additional Cutter Chain widths, from 5/8-Inch to 15/16-Inch, are also available (Optional). Expect the best and get it with Makita Power Tools.The Makita 7104L is a 12 Amp Chain Mortiser. Perfect for the timber framing and log home industries, this innovative power tool notches and/or cuts through-holes in thick wood stock quickly, neatly and accurately. Extremely portable with its built-in carrying handle and 37.4 lb weight. The powerful 12 amp motor can easily handle any size job and the externally accessible brushes makes service quick and easy. Equipped with a standard 23/32-Inch (18.25mm) Cutter Chain, you can max cut up to 12-1/8 Inch wide and 6-1/8 Inch deep. Five additional Cutter Chain widths, from 5/8-Inch to 15/16-Inch, are also available (Optional). Expect the best and get it with Makita Power Tools.
1469.99
Price: 1469.99
|
 The Makita BJV180Z is a 18V Lithium-Ion Cordless Jig Saw - Tool Only. The Makita BJV180Z has 4-Pole position cut settings (3 Orbital and 1 Straight) for fast and efficient cutting in all applications. The large variable speed trigger on the Makita BJV180Z allows for total cutting control (0-2600 SPM). The Makita BJV180Zs LXT Lithium-Ion provides longer run time, 5x lower self-discharge (for use any time) and 16 firm holding contact terminals (for constant high power).The Makita BJV180Z is a 18V Lithium-Ion Cordless Jig Saw - Tool Only. The Makita BJV180Z has 4-Pole position cut settings (3 Orbital and 1 Straight) for fast and efficient cutting in all applications. The large variable speed trigger on the Makita BJV180Z allows for total cutting control (0-2600 SPM). The Makita BJV180Zs LXT Lithium-Ion provides longer run time, 5x lower self-discharge (for use any time) and 16 firm holding contact terminals (for constant high power).
209.99
Price: 209.99
|
|
|
| Makita LXT407 18V LXT Lithium-Ion 4-Pc Cordless Combo Set with FREE Makita Tool by Mail-In Rebate! (exp 6-30-09, see rebate form for free tool choices) | Makita BTD141 18V LXT Lithium-Ion Cordless Impact Driver with FREE Makita Tool by Mail-In Rebate! (exp 6-30-09, see rebate form for free tool choices) |
 The Makita LXT 407 combo kit includes BHP452A 1/2 Hammer Driver-Drill, BTD140 Impact Driver, BJR152 Reciprocating Saw, and BML185 fluorescent flash light. With a new 4-pole motor the hammer driver/drill delivers a maximum 450 in. lbs torque in a small size of 9 � inches.The BTD140 Impact Driver, being a mere 3.3 lbs in weight, substantially reduces the operator fatigue. Like the hammer drill, this power tool features a 4-pole motor as well, which delivers 1,280 in. lbs of torque and up to 3,200 IPM, thus ensuring fast and effective performance with minimal effort.The 8.1 lbs Reciprocating Saw ensures that the operation is less strenuous, especially when it comes to long working hours.The 17 inches long reciprocating table saw cuts fast with 1 1/8 inch stroke length and 2900 SPM.The Flashlight with Xenon bulbs that is available with this Makita combo set can be adjusted and set at 4 different positions as per a user's requirement. The flashlight runs for 4.3 hrs, in single charge, ensuring consistent illumination for a long time.All the matika tools of this kit are powered by Makita LXT Lithium Ion Batteries. With 16 firm holding contact terminals this battery delivers high power consistently.Additionally, as the batteries' self discharge is five times lesser than any other standard batteries, they provide a longer run time for all the cordless tools.The Makita LXT 407 combo kit includes BHP452A 1/2 Hammer Driver-Drill, BTD140 Impact Driver, BJR152 Reciprocating Saw, and BML185 fluorescent flash light. With a new 4-pole motor the hammer driver/drill delivers a maximum 450 in. lbs torque in a small size of 9 � inches.The BTD140 Impact Driver, being a mere 3.3 lbs in weight, substantially reduces the operator fatigue. Like the hammer drill, this power tool features a 4-pole motor as well, which delivers 1,280 in. lbs of torque and up to 3,200 IPM, thus ensuring fast and effective performance with minimal effort.The 8.1 lbs Reciprocating Saw ensures that the operation is less strenuous, especially when it comes to long working hours.The 17 inches long reciprocating table saw cuts fast with 1 1/8 inch stroke length and 2900 SPM.The Flashlight with Xenon bulbs that is available with this Makita combo set can be adjusted and set at 4 different positions as per a user's requirement. The flashlight runs for 4.3 hrs, in single charge, ensuring consistent illumination for a long time.All the matika tools of this kit are powered by Makita LXT Lithium Ion Batteries. With 16 firm holding contact terminals this battery delivers high power consistently.Additionally, as the batteries' self discharge is five times lesser than any other standard batteries, they provide a longer run time for all the cordless tools.
419.99
Price: 419.99
|
 The Makita 18V LXT Lithium-Ion Cordless Impact Driver is a lightweight but powerful impact driver, weighing just over 3 pounds. The light weight combined with the ergonomic shape of the tool make this a very comfortable and easy to handle tool. Lithium-Ion technology gives this impact driver longer run time, add to this a 30-Minute Rapid Charger and you get a more efficient tool with less down time for charging. Built-in L.E.D. lights illuminate your work area for added precision.The Makita 18V LXT Lithium-Ion Cordless Impact Driver is a lightweight but powerful impact driver, weighing just over 3 pounds. The light weight combined with the ergonomic shape of the tool make this a very comfortable and easy to handle tool. Lithium-Ion technology gives this impact driver longer run time, add to this a 30-Minute Rapid Charger and you get a more efficient tool with less down time for charging. Built-in L.E.D. lights illuminate your work area for added precision.
279.99
Price: 279.99
|
|
|
| Makita LCT203W 10.8 Volt Lithium Ion Impact Driver 2 Piece Kit | Makita A-94552 4-1/2 Inch Diamond Turbo Blade, General Purpose |
 The Makita LCT203W is a 10.8V Lithium-Ion 2-piece Combo Kit and includes the 10.8V Driver-Drill, 10.8V Impact Driver, one battery charger, two 10.8V Compact Lithium-Ion batteries, a double-ended Phillips bit and a metallic hard case. Both of these tools feature LED lights to illuminate your work surfaces and ergonomic grips that fit like a glove for even pressure and easy control.The Makita LCT203W is a 10.8V Lithium-Ion 2-piece Combo Kit and includes the 10.8V Driver-Drill, 10.8V Impact Driver, one battery charger, two 10.8V Compact Lithium-Ion batteries, a double-ended Phillips bit and a metallic hard case. Both of these tools feature LED lights to illuminate your work surfaces and ergonomic grips that fit like a glove for even pressure and easy control.
169.99
Price: 169.99
|
 The Makita A-94552 is a 4-1/2 Inch Diamond Turbo Blade for General Purpose Cutting.The Makita A-94552 is a 4-1/2 Inch Diamond Turbo Blade for General Purpose Cutting.
9.99
Price: 9.99
|
|
|
| Makita BTD141Z Factory Reconditioned 18-Volt LXT Lithium-Ion Cordless Impact Driver - Tool Only | Makita BHP454 18-Volt LXT Lithium-Ion 1/2-Inch Cordless Hammer Drill/Driver Kit with FREE Makita Tool by Mail-In Rebate! (exp 6-30-09, see rebate form for free tool choices) |
 Makita BTD141Z 4-pole maximum torque motor delivers 1,330 in./ lbs. of efficient torque in a compact size50% more compact design at only 5-3/4" long and weighs only 3.4 lbs. for less operator fatigueErgonomic shape fits like a glove with even pressure and easy controlBuilt-in L.E.D. light for more illuminated workMakitas proprietary hammer and anvil are made using the highest quality steel and heat hardened to last longerElectric brake for immediate stops and minimizes kickbackTwo-piece armature and field along with externally accessible brushes for serviceability and longer motor lifeLXT Lithium-Ion provides longer run time, 5x lower self-discharge (for use any time) and 16 firm holding contact terminals (for constant high power)Makita BTD141Z 4-pole maximum torque motor delivers 1,330 in./ lbs. of efficient torque in a compact size50% more compact design at only 5-3/4" long and weighs only 3.4 lbs. for less operator fatigueErgonomic shape fits like a glove with even pressure and easy controlBuilt-in L.E.D. light for more illuminated workMakitas proprietary hammer and anvil are made using the highest quality steel and heat hardened to last longerElectric brake for immediate stops and minimizes kickbackTwo-piece armature and field along with externally accessible brushes for serviceability and longer motor lifeLXT Lithium-Ion provides longer run time, 5x lower self-discharge (for use any time) and 16 firm holding contact terminals (for constant high power)
69.99
Price: 69.99
|
 4-Pole motor Delivers 560in. lbs. of Maximum Torque2-Speed All Metal Transmission (0-400/0-1,700 RPM Covers a Wide Range of ApplicationShift-Lock Drive System QuicklyShifts Between Drilling, Driving and Hammer ModesCompact Design at only 9-9/16" Long and Weighs Only 4.9 lbs. for Reduced Operator Fatigue4-Pole motor Delivers 560in. lbs. of Maximum Torque2-Speed All Metal Transmission (0-400/0-1,700 RPM Covers a Wide Range of ApplicationShift-Lock Drive System QuicklyShifts Between Drilling, Driving and Hammer ModesCompact Design at only 9-9/16" Long and Weighs Only 4.9 lbs. for Reduced Operator Fatigue
299.99
Price: 299.99
|
|
|
| Makita 5057KB Factory Reconditioned 7-1/4-Inch Circular Saw with Dust Collector, 13 Amps | Makita HM1500B Factory Reconditioned 42-Pound Demolition Hammer with Case, 1300 BPM, 13.5 Amps |
 The Makita 5057KB is a Factory Reconditioned 7-1/4 Inch Circular Saw. The saw is used for fiber-cement materials. Its 13 Amp motor takes care of five 5/16-Inch siding boards in a single pass. The saw features a dust collection container to keep work environment clean and saw bearings and switch are dust proof to keep them working longer. The control lever on the saw enables guard to be retracted for easier plunge cuts and bevel cuts from 0 - 45.The Makita 5057KB is a Factory Reconditioned 7-1/4 Inch Circular Saw. The saw is used for fiber-cement materials. Its 13 Amp motor takes care of five 5/16-Inch siding boards in a single pass. The saw features a dust collection container to keep work environment clean and saw bearings and switch are dust proof to keep them working longer. The control lever on the saw enables guard to be retracted for easier plunge cuts and bevel cuts from 0 - 45.
169.99
Price: 169.99
|
 Innovative pneumatic compression system automatically adjusts air in the cylinder to minimize power loss and deliver unmatched power-to-weight ratioSpecial idling mechanism (patented) reduces hammering while idlingRubber-ringed brush holder cushions vibrations and lengthens life of brushes and armatureAutomatic brush cut-out systemSide handle swivels 360 for operator comfort and controlAnti-vibration main handle markedly reduced operator fatiguePowerful 13.5 AMP motorAccepts commonly used 1-1/8" hex shank bits and air tool bitsInnovative pneumatic compression system automatically adjusts air in the cylinder to minimize power loss and deliver unmatched power-to-weight ratioSpecial idling mechanism (patented) reduces hammering while idlingRubber-ringed brush holder cushions vibrations and lengthens life of brushes and armatureAutomatic brush cut-out systemSide handle swivels 360 for operator comfort and controlAnti-vibration main handle markedly reduced operator fatiguePowerful 13.5 AMP motorAccepts commonly used 1-1/8" hex shank bits and air tool bits
699.99
Price: 699.99
|
|
|
| Senco SLS20HF Hardwood Flooring Stapler | Senco SC2 Corrugated Fastener Tool, 90 - 110 PSIG |
 The lightweight SLS20HF tongue-and-groove installation stapler drives 1 to 1-1/8 staples at a perfect 45 angle every time and virtually eliminates tongue splitting and floor surface damage. Its front block easily adjusts for different floor thicknesses, while the industry-exclusive safety ensures accurate staple placement. This tool installs pre-finished tongue-in-groove products (1/4, 5/16, 3/8) and some of the 1/2 flooring brands.The lightweight SLS20HF tongue-and-groove installation stapler drives 1 to 1-1/8 staples at a perfect 45 angle every time and virtually eliminates tongue splitting and floor surface damage. Its front block easily adjusts for different floor thicknesses, while the industry-exclusive safety ensures accurate staple placement. This tool installs pre-finished tongue-in-groove products (1/4, 5/16, 3/8) and some of the 1/2 flooring brands.
289.99
Price: 289.99
|
 -Added strength for larger butt joints-Powerful for hard and dense material-Eliminate gluing, milling, doweling, screwing and clamping-Senco corrugated fasteners provide twice the joint strength of ordinary fasteners-Added strength for larger butt joints-Powerful for hard and dense material-Eliminate gluing, milling, doweling, screwing and clamping-Senco corrugated fasteners provide twice the joint strength of ordinary fasteners
589.99
Price: 589.99
|
|
|
| Senco SHF50 1-1/2Inch to 2Inch Hardwood Flooring Nailer, 90 - 110 PSIG, 100 Nails | Alltrade 836431 3 Piece Step Drill Set Titanium Coated |
 The Senco SHF50 is a 1-1/2 to 2 Hardwood Flooring Nailer, 90 - 110 PSIG, 100 Nails. The new SENCO SHF50 Pneumatic Hardwood Flooring Nailer is ergonomically designed with the hardwood installer in mind. It has a rugged composite base to virtually eliminate scratching and damage to the wood surface. Its also the industrys only pneumatic hardwood flooring nailer with a work contact safety, which is activated when the tool is positioned on the flooring tongue - not by depressing a trigger. The Senco SHF50 is a 1-1/2 to 2 Hardwood Flooring Nailer, 90 - 110 PSIG, 100 Nails. The new SENCO SHF50 Pneumatic Hardwood Flooring Nailer is ergonomically designed with the hardwood installer in mind. It has a rugged composite base to virtually eliminate scratching and damage to the wood surface. Its also the industrys only pneumatic hardwood flooring nailer with a work contact safety, which is activated when the tool is positioned on the flooring tongue - not by depressing a trigger.
699.99
Price: 699.99
|
 The Alltrade 836431 is a 3 Piece Set of Titanium Coated Step Drills. This set includes 3 different step drill bits with various sizes. Each bit is titanium coated for cooler and longer running.The Alltrade 836431 is a 3 Piece Set of Titanium Coated Step Drills. This set includes 3 different step drill bits with various sizes. Each bit is titanium coated for cooler and longer running.
12.99
Price: 12.99
|
|
|
| Tenryu CB255TH Circular Saw Blade Gift Pack | Festool 494607 68 Tooth Aluminum Kapex Saw Blade |
 The Tenryu CB255TH is a Circular Saw Blade Gift Pack. The pack includes 3 different series of woodworking blades. The gold medal series blade GM-25540 has saw plate which run-out less than .002 for flat true run. The built-in dampening system reduces vibration, making cuts quieter and more precise. It performs smooth, easy crosscuts and rips. The Mel-Pro series ML-25580AB blade is an ultimate melamine and veneer-faced plywood cutting blade. It has precision ground carbide teeth set on hand-tensioned tool steel bodies which produce finer cuts without chipping and bottom-side blowout. The patented resin bond-filled expansion slots effectively absorb vibration and reduce noise. The industrial blade series IW-25524CBD1 blade has large European style tips for longer life with resin bond, laser slots to absorb and eliminate vibration to produce a cleaner, quieter and more efficient cut.The Tenryu CB255TH is a Circular Saw Blade Gift Pack. The pack includes 3 different series of woodworking blades. The gold medal series blade GM-25540 has saw plate which run-out less than .002 for flat true run. The built-in dampening system reduces vibration, making cuts quieter and more precise. It performs smooth, easy crosscuts and rips. The Mel-Pro series ML-25580AB blade is an ultimate melamine and veneer-faced plywood cutting blade. It has precision ground carbide teeth set on hand-tensioned tool steel bodies which produce finer cuts without chipping and bottom-side blowout. The patented resin bond-filled expansion slots effectively absorb vibration and reduce noise. The industrial blade series IW-25524CBD1 blade has large European style tips for longer life with resin bond, laser slots to absorb and eliminate vibration to produce a cleaner, quieter and more efficient cut.
199.99
Price: 199.99
|
 ToolKing.com is authorized to sell Festool products only to customers residing the United States and its territoriesToolKing.com promotional discount codes or coupons are NOT valid on Festool productsThe Festool 494607 is a 68 Tooth Aluminum Kapex Saw Blade of 30mm Bore. The Kapex Blade is a Carbide-tipped, TC Saw Blade for cutting non-ferrous metals, especially aluminum. This blade can also be used on acrylics and hard plastics.ToolKing.com is authorized to sell Festool products only to customers residing the United States and its territoriesToolKing.com promotional discount codes or coupons are NOT valid on Festool productsThe Festool 494607 is a 68 Tooth Aluminum Kapex Saw Blade of 30mm Bore. The Kapex Blade is a Carbide-tipped, TC Saw Blade for cutting non-ferrous metals, especially aluminum. This blade can also be used on acrylics and hard plastics.
122.00
Price: 122.00
|
|
|
| Grip 67442 10-1/2Inch x 11Inch Magnetic Parts Tray | Paslode 902000F Factory Reconditioned IM250II 16-Gauge Cordless Straight Finish Nailer with Impulse Technology |
 Heavy gauge, stainless steel construction with smooth roleld edges Keeps small parts, tools, screws, needles, and bolts where you put them - no more lost bolts! Four 3-1/4 diamter magnets with rubber covers allows the tray to be attached to any metal base Bright polished dish is easy to clean 10-1/2 x 11 x 1-1/4 depth Heavy gauge, stainless steel construction with smooth roleld edges Keeps small parts, tools, screws, needles, and bolts where you put them - no more lost bolts! Four 3-1/4 diamter magnets with rubber covers allows the tray to be attached to any metal base Bright polished dish is easy to clean 10-1/2 x 11 x 1-1/4 depth
10.99
Price: 10.99
|
 When operating this tool in altitudes from 4,000-9,000 feet it is recommended that the Paslode 219247 High-Altitude Blue Metering Valve (sold separately) be used with the tools yellow fuel cell.Not just cordless - Paslode Cordless. That means no hoses, no compressors, and no hassles. Impulse Technology allows for minimal set-up so you can save time and money on the jobsite. Paslode Cordless uses a patented fuel plus battery system which has resulted in compact, lightweight tools that also offer exceptional power and performance. The Paslode Factory Reconditioned IM250II is a great example of this innovation. This ultra-light nailer packs a hefty punch for only weighing 4.75 pounds. Its able to drive 3/4 to 2-1/2 fasteners with ease, making it extremely versatile. You can also adjust the depth of drive without tools, saving you more time. Convenience of features and portability - what could be better? Attention International Customers Paslode products cannot be shipped outside of the USA.When operating this tool in altitudes from 4,000-9,000 feet it is recommended that the Paslode 219247 High-Altitude Blue Metering Valve (sold separately) be used with the tools yellow fuel cell.Not just cordless - Paslode Cordless. That means no hoses, no compressors, and no hassles. Impulse Technology allows for minimal set-up so you can save time and money on the jobsite. Paslode Cordless uses a patented fuel plus battery system which has resulted in compact, lightweight tools that also offer exceptional power and performance. The Paslode Factory Reconditioned IM250II is a great example of this innovation. This ultra-light nailer packs a hefty punch for only weighing 4.75 pounds. Its able to drive 3/4 to 2-1/2 fasteners with ease, making it extremely versatile. You can also adjust the depth of drive without tools, saving you more time. Convenience of features and portability - what could be better? Attention International Customers Paslode products cannot be shipped outside of the USA.
199.99
Price: 199.99
|
|
|
| Denver Tools 19212810 1/2-Inch Electric Impact Wrench | Stanley 16-291 1-Inch X 12-Inch Cold Chisel |
 The Denver Tools 12810 is a 1/2-Inch Heavy Duty Industrial Electric Impact Wrench. The 19212810 Electric Impact Wrench has a reversiable 7.5amp moter and rugged die cast aluminum gear housing. A rocker trigger allows for easy one-hand operation.The Denver Tools 12810 is a 1/2-Inch Heavy Duty Industrial Electric Impact Wrench. The 19212810 Electric Impact Wrench has a reversiable 7.5amp moter and rugged die cast aluminum gear housing. A rocker trigger allows for easy one-hand operation.
49.99
Price: 49.99
|
 The Stanley 16-291 is 1 X 12 Cold Chisel. The One-piece construction forged from chrome vanadium steel for increased strength and durability. It is hardened, quenched and tempered for long life and added safety. The powder coat finish is for increased visibility.The Stanley 16-291 is 1 X 12 Cold Chisel. The One-piece construction forged from chrome vanadium steel for increased strength and durability. It is hardened, quenched and tempered for long life and added safety. The powder coat finish is for increased visibility.
7.99
Price: 7.99
|
|
|
| Vaughan 116-04 CF2HC 19-Ounce California Framing Hammer With Milled Face | Flex BED163 3 Speed Wet Core Drill with Stand, 0-2100 RPM, 17.6 Amps |
 CF2HC California Framer combines the features of two of their most popular tools, into a rugged, heavy construction hammer. The smoothly swept claws were borrowed from our "999" Rip Hammer, and the extra larger striking face, hatchet eye and sturdy handle are a heritage of our Rigbuilder's Hatchet. The hatchet style handle is best grade, second growth hickory. To provide extra strength, the handle has a large cross section where it joins the fully polished head.CF2HC California Framer combines the features of two of their most popular tools, into a rugged, heavy construction hammer. The smoothly swept claws were borrowed from our "999" Rip Hammer, and the extra larger striking face, hatchet eye and sturdy handle are a heritage of our Rigbuilder's Hatchet. The hatchet style handle is best grade, second growth hickory. To provide extra strength, the handle has a large cross section where it joins the fully polished head.
19.99
Price: 19.99
|
 The Flex BED163 is a portable core drilling unit with anchor or vacuum attachment. The 17.6 Amp strong, three speed drill BSW 2123 C combined with the BD 160 stationary drill stand. It is a lightweight, mobile unit for one-person operation. The drill bits are cooled directly by the central water supply. The seals can be replaced quickly from the outside. The combination shaft with two connections, G 1/2” inside, 1-1/4” UNC outside, makes the connection of standard drill bits possible. The water collector ring prevents water damage. The quality shut-off carbon brushes if the carbon brushes wear down, the motor will be automatically switched off and thus protected from damage. The Flex BED163 is a portable core drilling unit with anchor or vacuum attachment. The 17.6 Amp strong, three speed drill BSW 2123 C combined with the BD 160 stationary drill stand. It is a lightweight, mobile unit for one-person operation. The drill bits are cooled directly by the central water supply. The seals can be replaced quickly from the outside. The combination shaft with two connections, G 1/2” inside, 1-1/4” UNC outside, makes the connection of standard drill bits possible. The water collector ring prevents water damage. The quality shut-off carbon brushes if the carbon brushes wear down, the motor will be automatically switched off and thus protected from damage.
2099.99
Price: 2099.99
|
|
|
| Bosch 1274DVS 3 inch x 21 inch Variable Speed Belt Sander, 550-1100 SFPM, 6.6 Amps | Bosch DLR165K Digital Laser Distance Measurer Kit |
 The Bosch 1274DVS is a 3 inch x 21 inch Variable Speed Belt Sander. The tool features a magnesium-and-plastic housing thats lightweight yet durable. The tool is balanced, comfortable and easy to operate-important features in a tool thats often used for long periods of time for removing large amounts of stock. The Bosch comes with a cast-aluminum platen-so theres none of the warping that affects stamped-steel platens-and it sands perfectly flat right out of the box. The motor is aligned with the belt edge to allow flush sanding into corners. The tools only drawback is that visibility is limited when sanding into tight corners.The Bosch 1274DVS is a 3 inch x 21 inch Variable Speed Belt Sander. The tool features a magnesium-and-plastic housing thats lightweight yet durable. The tool is balanced, comfortable and easy to operate-important features in a tool thats often used for long periods of time for removing large amounts of stock. The Bosch comes with a cast-aluminum platen-so theres none of the warping that affects stamped-steel platens-and it sands perfectly flat right out of the box. The motor is aligned with the belt edge to allow flush sanding into corners. The tools only drawback is that visibility is limited when sanding into tight corners.
169.99
Price: 169.99
|
 The Bosch DLR165K is a Digital Laser Rangefinder Kit. It has four measuring reference points - Back, front, swing-out extension pin for measuring from inside corners or channels or center of optional tripod. It features the precision laser measuring technology in which the laser beam does both pointing and measuring. The indirect length measurement mode calculates inaccessible distances that cannot be measured directly due to obstruction or lack of reflecting surface using Pythagorean theorem (a2 + b2= c2).The Bosch DLR165K is a Digital Laser Rangefinder Kit. It has four measuring reference points - Back, front, swing-out extension pin for measuring from inside corners or channels or center of optional tripod. It features the precision laser measuring technology in which the laser beam does both pointing and measuring. The indirect length measurement mode calculates inaccessible distances that cannot be measured directly due to obstruction or lack of reflecting surface using Pythagorean theorem (a2 + b2= c2).
139.99
Price: 139.99
|
|
|
| Bosch 1617EVSPK-XP 2.25 Combination Plunge and Fixed Base Router w/ Accessory Pack | Bosch 1375A Factory Reconditioned 4-1/2 inch Small Angle Grinder, 11,000 RPM, 6.0 Amps |
 The Bosch 1617EVSPK is used as fixed-base or plunge router. It features a 12 Amp, 2-1/4 HP, 8000 to 25000 RPM (no-load) motor with plunge base and fixed base in a rugged well-organized carrying case. The kit features the exclusive quick-clamp system, allowing tool-free movement of motor from base to base. Other key features include variable speed, soft-start and Constant Response circuitry that maintains speed under load. The depth adjustment system features coarse and microfine bit depth adjustment with re-settable indicators. Both bases have large base openings with 2 inch sub-base openings, accepting larger bits and providing better visibility. The routers right or left switch and cord locations provide both choice and consistency and the motor does not rotate during depth adjustment. The tool-free templet guide adapter allows quick changes and both bases feature the Bosch exclusive precision centering design for centering optional templet guides. The motor has a one-piece armature shaft for accuracy and long bit shank capacity. The Bosch 1617EVSPK-XP includes an accessory package which features a router guide, three template guides (5/16-Inch, 7/16-Inch and 5/8-Inch) and a dust extraction hood.The Bosch 1617EVSPK is used as fixed-base or plunge router. It features a 12 Amp, 2-1/4 HP, 8000 to 25000 RPM (no-load) motor with plunge base and fixed base in a rugged well-organized carrying case. The kit features the exclusive quick-clamp system, allowing tool-free movement of motor from base to base. Other key features include variable speed, soft-start and Constant Response circuitry that maintains speed under load. The depth adjustment system features coarse and microfine bit depth adjustment with re-settable indicators. Both bases have large base openings with 2 inch sub-base openings, accepting larger bits and providing better visibility. The routers right or left switch and cord locations provide both choice and consistency and the motor does not rotate during depth adjustment. The tool-free templet guide adapter allows quick changes and both bases feature the Bosch exclusive precision centering design for centering optional templet guides. The motor has a one-piece armature shaft for accuracy and long bit shank capacity. The Bosch 1617EVSPK-XP includes an accessory package which features a router guide, three template guides (5/16-Inch, 7/16-Inch and 5/8-Inch) and a dust extraction hood.
219.99
Price: 219.99
|
 The Bosch 1375A is a Factory Reconditioned 4-1/2 inch Small Angle Grinder. The multipurpose grinder is designed to grind, sand, brush, sharpen and to deburr. It offers a 5/8 inch-11 spindle thread for attaching the most popular accessories. The slim housing grip is designed for easy handling and the two-position side handle is angled for comfort. The dust-resistant switch and the protected motor deliver longer service life. Save time with the spindle lock for quick wheel changes. The grinder comes complete with guard, side handle, flange kit, wrench and wheel.The Bosch 1375A is a Factory Reconditioned 4-1/2 inch Small Angle Grinder. The multipurpose grinder is designed to grind, sand, brush, sharpen and to deburr. It offers a 5/8 inch-11 spindle thread for attaching the most popular accessories. The slim housing grip is designed for easy handling and the two-position side handle is angled for comfort. The dust-resistant switch and the protected motor deliver longer service life. Save time with the spindle lock for quick wheel changes. The grinder comes complete with guard, side handle, flange kit, wrench and wheel.
59.99
Price: 59.99
|
|
|
| Bosch HS1915 2 inch x 12 inch SDS-Max Scraping Chisel | Bosch 11236VS Factory Reconditioned 1-1/8 inch 3-Mode SDS Plus Rotary Hammer, 0-850 RPM, 7.5 Amps |
 The Bosch HS1915 is a 2 inch x 12 inch SDS-Max Scraping Chisel. The chisel is used for scraping such as removing tile from a concrete floor.The Bosch HS1915 is a 2 inch x 12 inch SDS-Max Scraping Chisel. The chisel is used for scraping such as removing tile from a concrete floor.
24.99
Price: 24.99
|
 The Bosch 11236VS is a factory reconditioned 1-1/8 inch 3-Mode SDS plus rotary hammer. The 7.5 Amps hammer runs on a variable-speed 0 to 850 RPM motor with 0 to 3900 BPM. The hammers Vario-Lock positioning enables the user to rotate and lock the chisel into 36 different positions to optimize the working angle. The unit features 3 operational modes for versatility hammer only, for light chipping applications with chisels; rotation only, for drilling wood, steel and building materials with optional chuck; and hammer/rotation, for drilling concrete, brick, stone and masonry. The tools maximum capacities are 1-1/8 inches in concrete, 1/2 inch in steel, 1-1/4 inches in woodland 4 inches in thin-wall core bit. It includes 360 auxiliary handle, depth gauge and carrying case.The Bosch 11236VS is a factory reconditioned 1-1/8 inch 3-Mode SDS plus rotary hammer. The 7.5 Amps hammer runs on a variable-speed 0 to 850 RPM motor with 0 to 3900 BPM. The hammers Vario-Lock positioning enables the user to rotate and lock the chisel into 36 different positions to optimize the working angle. The unit features 3 operational modes for versatility hammer only, for light chipping applications with chisels; rotation only, for drilling wood, steel and building materials with optional chuck; and hammer/rotation, for drilling concrete, brick, stone and masonry. The tools maximum capacities are 1-1/8 inches in concrete, 1/2 inch in steel, 1-1/4 inches in woodland 4 inches in thin-wall core bit. It includes 360 auxiliary handle, depth gauge and carrying case.
259.99
Price: 259.99
|
|
|
| Johnson 5500M-Glo 9-Inch Heavy-Duty Magnetic Aluminum Torpedo Level with Glo-View | Bosch 1619EVS Factory Reconditioned 3.25 HP Electronic Variable Speed Plunge Router, 8000-21000 RPM, 15.0 Amps |
 Patented Glo-View vial surrounds illuminate in dim light making vials easy to readPowerful GripTight rare earth magnets hold to ferrous metal surfacesSuper strong 9" solid aluminum frame is Job Site ToughV-Groove frame fits on pipe and conduit3 vials read plumb, level and 45Top-read window for easy viewingGlo-View allows for use in dark areasVials are illuminated by patented glow-in-the-dark surroundsNatural light or hand-held light sources re-charge the vial surroundsPatented Glo-View vial surrounds illuminate in dim light making vials easy to readPowerful GripTight rare earth magnets hold to ferrous metal surfacesSuper strong 9" solid aluminum frame is Job Site ToughV-Groove frame fits on pipe and conduit3 vials read plumb, level and 45Top-read window for easy viewingGlo-View allows for use in dark areasVials are illuminated by patented glow-in-the-dark surroundsNatural light or hand-held light sources re-charge the vial surrounds
9.99
Price: 9.99
|
 The Bosch 1619EVS is a factory reconditioned power tool. The Bosch 1619EVS electronic plunge router is the most versatile and precise router above and below the table. It features a powerful 3-1/4 HP, 15 Amp motor and 3-3/4 inch base opening, allowing it to handle any routing task, including raised panels. The motor features a variable speed range of 8000 to 21000 RPM (no-load), soft-start and Constant Response circuitry that maintains speed under load. The plunge mechanism features dual plunge post bearings for smooth and accurate plunging action. The routers one-piece armature shaft provides accuracy and long bit shank capacity. The 1619EVS also has the Bosch-exclusive precision centering design for centering optional templet guides.The Bosch 1619EVS is a factory reconditioned power tool. The Bosch 1619EVS electronic plunge router is the most versatile and precise router above and below the table. It features a powerful 3-1/4 HP, 15 Amp motor and 3-3/4 inch base opening, allowing it to handle any routing task, including raised panels. The motor features a variable speed range of 8000 to 21000 RPM (no-load), soft-start and Constant Response circuitry that maintains speed under load. The plunge mechanism features dual plunge post bearings for smooth and accurate plunging action. The routers one-piece armature shaft provides accuracy and long bit shank capacity. The 1619EVS also has the Bosch-exclusive precision centering design for centering optional templet guides.
239.99
Price: 239.99
|
|
|
| DeWalt D28402D 4-1/2-Inch Small Angle Grinder and 3/8-Inch Variable-Speed Reversible Drill Combo Kit | DeWalt DW734R Factory Reconditioned DW734 Heavy-Duty 12-1/2 Inch Portable Planer |
 D28402 Small Angle Grinder10.0 Amp AC/DC 11,000 RPM motor designed for faster material removal and higher overload protectionDust Ejection System provides durability by ejecting dust particles that enter the tool through the air intake ventsJam-pot, low profile gear case provides precise gear alignment for a smoother, quieter transmission while allowing access to tight spacesOne-piece brush arm prevents brush hang-up due to dust ingressQuick-change wheel release provides easier and quicker wheel removal without the need for a wrenchKeyless adjustable guard provides tool free guard adjustment thus increasing productivityVibration-reducing removable side handle provides user comfort and reduces user-felt vibrationAuto-off brushes shut the tool down when the brushes need replacing to avoid tool damageOversized, protected spindle lock button provides easier and quicker wheel changesPaddle switch lock-off provides the user protection from accidental start upMatching wheel flanges allow the use of common accessoriesD210075-amp motor offers the user superior power and durability3/8" keyless chuck offers greater bit retentionAll ball-bearing construction provides greater durability and longer tool lifeBuilt-in two-way level for drilling accurate vertical and horizontal holesContoured textured handle provides better gripping surface and reduces user fatigueGlass-filled nylon housing is durable, impact resistant and provides lower maintenance cost D28402 Small Angle Grinder10.0 Amp AC/DC 11,000 RPM motor designed for faster material removal and higher overload protectionDust Ejection System provides durability by ejecting dust particles that enter the tool through the air intake ventsJam-pot, low profile gear case provides precise gear alignment for a smoother, quieter transmission while allowing access to tight spacesOne-piece brush arm prevents brush hang-up due to dust ingressQuick-change wheel release provides easier and quicker wheel removal without the need for a wrenchKeyless adjustable guard provides tool free guard adjustment thus increasing productivityVibration-reducing removable side handle provides user comfort and reduces user-felt vibrationAuto-off brushes shut the tool down when the brushes need replacing to avoid tool damageOversized, protected spindle lock button provides easier and quicker wheel changesPaddle switch lock-off provides the user protection from accidental start upMatching wheel flanges allow the use of common accessoriesD210075-amp motor offers the user superior power and durability3/8" keyless chuck offers greater bit retentionAll ball-bearing construction provides greater durability and longer tool lifeBuilt-in two-way level for drilling accurate vertical and horizontal holesContoured textured handle provides better gripping surface and reduces user fatigueGlass-filled nylon housing is durable, impact resistant and provides lower maintenance cost
119.99
Price: 119.99
|
 The DeWalt DW734 is a Factory Reconditioned Heavy-Duty 12-1/2 Inch Thickness Planer. It has a three knife cutter-head, which sets the surface finish delivered by the factory reconditioned DW734 thickness planer above the rest. The powerful 15 Amps, 10000 RPM motor combines with the three knife cutter-head to remove 96 cuts per inch. The M2 laminated knives are disposable and reversible. An intuitive, one tool knife change system allows the operator to easily seat new knives on pins that are precision machined on the cutter-head. The pins ensure ease of installation and parallelism of all three knife edges. Extra-large folding tables and a 4 column carriage lock work together to minimize the movement that causes snipe. A material removal gauge, thickness scale and turret depth stop display accurate measurements of material dimensions and removal rate. The DeWalt DW734 is a Factory Reconditioned Heavy-Duty 12-1/2 Inch Thickness Planer. It has a three knife cutter-head, which sets the surface finish delivered by the factory reconditioned DW734 thickness planer above the rest. The powerful 15 Amps, 10000 RPM motor combines with the three knife cutter-head to remove 96 cuts per inch. The M2 laminated knives are disposable and reversible. An intuitive, one tool knife change system allows the operator to easily seat new knives on pins that are precision machined on the cutter-head. The pins ensure ease of installation and parallelism of all three knife edges. Extra-large folding tables and a 4 column carriage lock work together to minimize the movement that causes snipe. A material removal gauge, thickness scale and turret depth stop display accurate measurements of material dimensions and removal rate.
349.64
Price: 349.64
|
|
|
| DeWalt DC628KR Factory Reconditioned DC628K Heavy-Duty XRP 18-Volt Cordless 15 Gauge 34� Angled Finish Nailer Kit | DeWalt DC2PAKCAR Factory Reconditioned DC2PAKCA XRP 18-Volt Cordless Hammerdrill / Reciprocating Saw Combo Kit |
 The factory reconditioned DeWalt DC628K Heavy-Duty XRP 18V 1-1/4 - 2-1/2 inch 15 Gauge 34 Angled Cordless Finish Nailer Kit is designed for serious professionals who demand the most out of their nailer. The Contact Trip Lock-Off disables the nailer trigger when not in use thus ensuring user safety. Capable of consistently nailing hard and soft joints, the DeWalt DC628K finish nailer works well when it comes to framing, sheathing, roof decking and sub flooring. This DeWalt finish nailer features integrated LED lights to illuminate any low lit or dark job site environments and provide clear visibility.The 6-position dial on the DC628K lets you select the exact depth setting quickly and eliminates the hassle of manually changing the depth depending on the application. The DeWalt DC628K's high performance engine provides enough power to smoothly and easily gun 15 ga nails. Powered by XRP extended run time batteries this, finish nailer promises longer runtime in a single charge.With two operating modes, sequential and bump, the DeWalt DC628K takes care of precision placement and production speed. A few of the other features worth mentioning on the DC628K are the reversible belt hook, 34 degree angled magazine with 110 nils capacity, rear load magazine for convenience, and top cap to make it impact resistant.The factory reconditioned DeWalt DC628K Heavy-Duty XRP 18V 1-1/4 - 2-1/2 inch 15 Gauge 34 Angled Cordless Finish Nailer Kit is designed for serious professionals who demand the most out of their nailer. The Contact Trip Lock-Off disables the nailer trigger when not in use thus ensuring user safety. Capable of consistently nailing hard and soft joints, the DeWalt DC628K finish nailer works well when it comes to framing, sheathing, roof decking and sub flooring. This DeWalt finish nailer features integrated LED lights to illuminate any low lit or dark job site environments and provide clear visibility.The 6-position dial on the DC628K lets you select the exact depth setting quickly and eliminates the hassle of manually changing the depth depending on the application. The DeWalt DC628K's high performance engine provides enough power to smoothly and easily gun 15 ga nails. Powered by XRP extended run time batteries this, finish nailer promises longer runtime in a single charge.With two operating modes, sequential and bump, the DeWalt DC628K takes care of precision placement and production speed. A few of the other features worth mentioning on the DC628K are the reversible belt hook, 34 degree angled magazine with 110 nils capacity, rear load magazine for convenience, and top cap to make it impact resistant.
236.24
Price: 236.24
|
 The DeWalt DC2PAKCA Factory Reconditioned Combo Kit offers you the convenience of speed and power in two tools - a hammerdrill and a reciprocating saw. The DC925 hammerdrill is easy to handle and is beautifully balanced. The 1/2 chuck grabs the bit powerfully and centers it quickly, locking it into place with the ratcheting system. Vibration is down to a minimum in the DC925 hammerdrill even at maximum RPM, so its not difficult to control.The DC385 reciprocating saw has a keyless blade clamp system that makes for easy blade changes. The DC385 is also extremely powerful, with up to 3,000 strokes per minute. The stroke length is 1-1/8, so you can get aggressive cutting and more even blade wear. You can set the blade in four positions to help you reach whatever youre cutting and the depth adjustment is as easy as pushing a button and adjusting the show. You get great control from this tool with the comfort grip that reduces vibration. The two tools together make the DC2PAKCA Factory Reconditioned Combo Kit a tremendous value! The DeWalt DC2PAKCA Factory Reconditioned Combo Kit offers you the convenience of speed and power in two tools - a hammerdrill and a reciprocating saw. The DC925 hammerdrill is easy to handle and is beautifully balanced. The 1/2 chuck grabs the bit powerfully and centers it quickly, locking it into place with the ratcheting system. Vibration is down to a minimum in the DC925 hammerdrill even at maximum RPM, so its not difficult to control.The DC385 reciprocating saw has a keyless blade clamp system that makes for easy blade changes. The DC385 is also extremely powerful, with up to 3,000 strokes per minute. The stroke length is 1-1/8, so you can get aggressive cutting and more even blade wear. You can set the blade in four positions to help you reach whatever youre cutting and the depth adjustment is as easy as pushing a button and adjusting the show. You get great control from this tool with the comfort grip that reduces vibration. The two tools together make the DC2PAKCA Factory Reconditioned Combo Kit a tremendous value!
229.99
Price: 229.99
|
|
|
| DeWalt DC720KAR Factory Reconditioned DC720KA 18-Volt Cordless 1/2-Inch Drill/Driver Kit | DeWalt DW311KR Factory Reconditioned DW311K Heavy-Duty Reciprocating Saw Kit |
 The DeWalt DC720KA Compact 1/2-Inch drill/driver provides users with superior ergonomics, better performance and enhanced durability. The DeWalt DC720KA offers end-users a dual-speed range of 0-500 and 0-1700 respectively, all packed into 4.8 pounds of compact weight and size. In addition, the DeWalt DC720KA has new components including a frameless motor that delivers 410 unit watts of power and all metal planetary gears for enhanced durability. Built in features include a LED light, 1/2-Inch single sleeve ratcheting chuck to reduce bit slippage and onboard bit storage. The DeWalt DC720KA Compact 1/2-Inch drill/driver provides users with superior ergonomics, better performance and enhanced durability. The DeWalt DC720KA offers end-users a dual-speed range of 0-500 and 0-1700 respectively, all packed into 4.8 pounds of compact weight and size. In addition, the DeWalt DC720KA has new components including a frameless motor that delivers 410 unit watts of power and all metal planetary gears for enhanced durability. Built in features include a LED light, 1/2-Inch single sleeve ratcheting chuck to reduce bit slippage and onboard bit storage.
179.54
Price: 179.54
|
 Designed for different type of cutting applications on wood, metal, plastic, and composites, DeWalt DW311K is a factory reconditioned heavy-duty reciprocating saw kit. The 13Amp motor enables 0-2900 strokes per minute for fast cutting. Each stroke can be of 1/8" in length. The stainless steel keyless blade clamp makes for secure and faster blade change. The keyless adjustments of the shoe also add to the versatility of the product.The speed of this DeWalt tool can be adjusted as per the requirement, letting its user full control over the tool. The ergonomics of the body and the anti-slip handle both ensure a comfortable working with this power tool. The compact size (18.0 inch in length) and the lightweight (14lbs)gives this equipment easy portability. Apart from the saw the kit also includes carrying case, metal blades, and an instruction manual.Designed for different type of cutting applications on wood, metal, plastic, and composites, DeWalt DW311K is a factory reconditioned heavy-duty reciprocating saw kit. The 13Amp motor enables 0-2900 strokes per minute for fast cutting. Each stroke can be of 1/8" in length. The stainless steel keyless blade clamp makes for secure and faster blade change. The keyless adjustments of the shoe also add to the versatility of the product.The speed of this DeWalt tool can be adjusted as per the requirement, letting its user full control over the tool. The ergonomics of the body and the anti-slip handle both ensure a comfortable working with this power tool. The compact size (18.0 inch in length) and the lightweight (14lbs)gives this equipment easy portability. Apart from the saw the kit also includes carrying case, metal blades, and an instruction manual.
137.77
Price: 137.77
|
|
|
| DeWalt D25313K Heavy-Duty 1 inch SDS L-Shape 3 Mode Hammer | DeWalt DC668KA 18V Heavy-Duty Light Gauge Steel Framing Screwdriver, 0-900 RPM & 0-2700 RPM, 180 in-lbs |
 The DeWalt D25313K is a Heavy-Duty 1 inch SDS L-Shape 3 Mode Hammer. The D25313Ks design offers superior balance and control for a variety of applications. The hammer is 11-1/2 inch and is the most compact in the market. The D25313Ks chipping (Hammer-Only) mode allows user to perform light chipping applications such as removal of mortar splatter, while Rotation-Only mode allows tool to be used for wood and metal drilling (using SDS-to-Round Shank Adapter). The DeWalt D25313K allows its users to get into tight spaces very easily. It features a lightweight design (6-1/2 lbs) which provides comfort for extended use. The DeWalt D25313K is a Heavy-Duty 1 inch SDS L-Shape 3 Mode Hammer. The D25313Ks design offers superior balance and control for a variety of applications. The hammer is 11-1/2 inch and is the most compact in the market. The D25313Ks chipping (Hammer-Only) mode allows user to perform light chipping applications such as removal of mortar splatter, while Rotation-Only mode allows tool to be used for wood and metal drilling (using SDS-to-Round Shank Adapter). The DeWalt D25313K allows its users to get into tight spaces very easily. It features a lightweight design (6-1/2 lbs) which provides comfort for extended use.
239.99
Price: 239.99
|
 The DeWalt DC668KA is an 18V Heavy-Duty Light Gauge Steel Framing Screwdriver. The DeWalt screwdriver is designed for a variety of steel stud framing applications. The registered Versa-Clutch torque adjustment dial allows to set the tool to a specific torque and prevents the stripping of fasteners. The heavy-duty screwdriver is also equipped with dual speeds running either 0-900 RPM or 0-2700 RPM which allows optimal performance using variety of fasteners. It uses a 1/4 inch hex drive which accommodates all fastening accessories including screw driving bits and nut runners.The DeWalt DC668KA is an 18V Heavy-Duty Light Gauge Steel Framing Screwdriver. The DeWalt screwdriver is designed for a variety of steel stud framing applications. The registered Versa-Clutch torque adjustment dial allows to set the tool to a specific torque and prevents the stripping of fasteners. The heavy-duty screwdriver is also equipped with dual speeds running either 0-900 RPM or 0-2700 RPM which allows optimal performance using variety of fasteners. It uses a 1/4 inch hex drive which accommodates all fastening accessories including screw driving bits and nut runners.
239.99
Price: 239.99
|
|
|
| DeWalt DW716 Heavy-Duty 12Inch Double-Bevel Compound Miter Saw, 3600 RPM, 15.0 Amps | DeWalt DC727VA Heavy-Duty 12-Volt Cordless 3/8-Inch Compact Drill/Driver Kit with Vehicle Charger |
 The DeWalt DW716 is powered by a 15 Amp motor and comes equipped with a 12 carbide blade spinning at 3600 RPM. The DW716 features extra tall fences and double bevel feature delivering unmatched performance. The DeWalt DW716 incorporates an adjustable stainless steel miter detent plate with 11 positive stops for the most common miter cuts. The cam lock miter handle eliminates the need to twist the miter handle to lock in on the miter angle and delivers a quick and solid miter lock. The saw features a miter detent override which allows the user to override the miter stops and adjust to the miter setting desired without the saw slipping into the miter detents while the new precise miter system delivers more repeatable and accurate miter angles. The innovative machined base fence design of the DeWalt DW716 delivers long term fence straightness by providing additional support to the fence. The DeWalt DW716 delivers the capacity to cut up to 6-1/2 base molding against the fence when mitered to the left or right and delivers up to a 2 x 10 crosscut with the innovative back fence design. The DeWalt DW716 is powered by a 15 Amp motor and comes equipped with a 12 carbide blade spinning at 3600 RPM. The DW716 features extra tall fences and double bevel feature delivering unmatched performance. The DeWalt DW716 incorporates an adjustable stainless steel miter detent plate with 11 positive stops for the most common miter cuts. The cam lock miter handle eliminates the need to twist the miter handle to lock in on the miter angle and delivers a quick and solid miter lock. The saw features a miter detent override which allows the user to override the miter stops and adjust to the miter setting desired without the saw slipping into the miter detents while the new precise miter system delivers more repeatable and accurate miter angles. The innovative machined base fence design of the DeWalt DW716 delivers long term fence straightness by providing additional support to the fence. The DeWalt DW716 delivers the capacity to cut up to 6-1/2 base molding against the fence when mitered to the left or right and delivers up to a 2 x 10 crosscut with the innovative back fence design.
399.00
Price: 399.00
|
 Lightweight and durable, DeWalt's DC727VA 12-Volt Drill/Driver Kit packs plenty of power and versatility to take on the continual, heavy-duty use that electricians, carpenters, HVAC installers, and woodworkers are faced with everyday. This is one of the lightest compact cordless drills on the market. Weighing just 3.9 pounds, the tool makes no sacrifices in the power department, where it out-muscles any drill in its class with 350 in./lbs. of torque. And, with low and high speed ranges maxing out at 400 and 1,400 rpm, this is one fast and versatile tool, too. Seventeen clutch settings let you fine-tune the tool to a wide variety of drilling/driving tasks. The DC727VA Drill is also outfitted with a 3/8" ratcheting chuck to virtually eliminate bit slippage. All metal planetary gears and a high performance motor mean optimal durability. A compact design handles like a champ in the tightest work areas. A newly designed, rubber grip means increased comfort and control, which helps the wrist out a lot on those high-torque, extended jobs. The kit includes a patented, three-stage charger and an automatic tune-up mode for longer life. Lightweight and durable, DeWalt's DC727VA 12-Volt Drill/Driver Kit packs plenty of power and versatility to take on the continual, heavy-duty use that electricians, carpenters, HVAC installers, and woodworkers are faced with everyday. This is one of the lightest compact cordless drills on the market. Weighing just 3.9 pounds, the tool makes no sacrifices in the power department, where it out-muscles any drill in its class with 350 in./lbs. of torque. And, with low and high speed ranges maxing out at 400 and 1,400 rpm, this is one fast and versatile tool, too. Seventeen clutch settings let you fine-tune the tool to a wide variety of drilling/driving tasks. The DC727VA Drill is also outfitted with a 3/8" ratcheting chuck to virtually eliminate bit slippage. All metal planetary gears and a high performance motor mean optimal durability. A compact design handles like a champ in the tightest work areas. A newly designed, rubber grip means increased comfort and control, which helps the wrist out a lot on those high-torque, extended jobs. The kit includes a patented, three-stage charger and an automatic tune-up mode for longer life.
119.99
Price: 119.99
|
|
|
| DeWalt DC920KAR Factory Reconditioned DC920KA Heavy-Duty XRP 1/2-Inch 18-Volt Cordless Drill/Driver Kit | DeWalt D25213K Factory Reconditioned D25213KR 1-Inch SDS D-Handle 3 Mode Hammer |
 With 480 unit Watts of power, the DeWalt DC920KA is ideally suited for drilling, driving or fastening. The DC920KA's patented 3-speed transmission optimizes the performance by letting the drill easily change speeds depending on the requirements of the application. The � inch ratcheting chuck tightly grips the DeWalt DC920KA's bit in place and prevents it from slipping while in use, thus ensuring complete user safety. The DC920KA is designed to store standard nut drivers and screwdriver tips. This factory reconditioned heavy-duty XRP � inch 18V cordless drill/driver has a great reputation in the industry for its performance and durability. Its XRP battery has an extended run time and provides a long battery life. The DC920KA's ergonomic design provides a comfortable grip and optimal balance, size, and weight. Weighing just 10 lbs, the cordless DeWalt DC920KA can be easily transported to the jobsite and used without any annoying cables.With 480 unit Watts of power, the DeWalt DC920KA is ideally suited for drilling, driving or fastening. The DC920KA's patented 3-speed transmission optimizes the performance by letting the drill easily change speeds depending on the requirements of the application. The � inch ratcheting chuck tightly grips the DeWalt DC920KA's bit in place and prevents it from slipping while in use, thus ensuring complete user safety. The DC920KA is designed to store standard nut drivers and screwdriver tips. This factory reconditioned heavy-duty XRP � inch 18V cordless drill/driver has a great reputation in the industry for its performance and durability. Its XRP battery has an extended run time and provides a long battery life. The DC920KA's ergonomic design provides a comfortable grip and optimal balance, size, and weight. Weighing just 10 lbs, the cordless DeWalt DC920KA can be easily transported to the jobsite and used without any annoying cables.
149.77
Price: 149.77
|
 The DeWalt D25213K Factory Reconditioned Heavy-Duty 1-Inch SDS D-Handle 3 Mode Hammer features 2.5 ft-lbs of impact energy that provides for fast drilling and powerful chipping. The unit has an 8.0 Amp motor that provides high performance and overload protection. This rotary hammer has a capacity to cover a broad range of mechanical and epoxy anchoring applications. The optimal range for this hammer in concrete is 5/32-Inch to 5/8-Inch. The reverse feature assists in the removal of fasteners. Use the tools variable speed for precise hole placement on work surface. The tool comes with a factory set clutch which reduces sudden, high torque reactions if the bit jams. The 360 degree side handle adjusts easily for preference or use in tight spaces. The DeWalt D25213K Factory Reconditioned Heavy-Duty 1-Inch SDS D-Handle 3 Mode Hammer features 2.5 ft-lbs of impact energy that provides for fast drilling and powerful chipping. The unit has an 8.0 Amp motor that provides high performance and overload protection. This rotary hammer has a capacity to cover a broad range of mechanical and epoxy anchoring applications. The optimal range for this hammer in concrete is 5/32-Inch to 5/8-Inch. The reverse feature assists in the removal of fasteners. Use the tools variable speed for precise hole placement on work surface. The tool comes with a factory set clutch which reduces sudden, high torque reactions if the bit jams. The 360 degree side handle adjusts easily for preference or use in tight spaces.
149.30
Price: 149.30
|
|
|
| DeWalt DW092PKR Factory Reconditioned DW092PK 20X Transit Level Kit | DeWalt DC925BKR Factory Reconditioned DC925BK 18-Volt Cordless XRP Hammer Drill/Driver - Tool Only with Case |
 The DeWalt DW092PK Factory Reconditioned 20x transit level package is a contractor-grade optical instrument best suited for manual long distance measurements that demand precision and accuracy in semi-large projects. It is ideal for landscaping, ground leveling, road and building construction, sewerage, drainage work and agricultural activities. With a magnification of 20 x, the DeWalt DW092PK transit level is manually accurate to per 100 ft with a maximum range of 200 ft. The standout features are its 360 horizontal circle with a 5-arc vernier scale for the purpose of accurate measurement of horizontal angles and an endless tangent drive usually found in auto levels and surveying instruments. The vertical angles are determined by the transit capability of the tool. The DeWalt DW092PK comes with a stadia ratio of 1100 for determining topographic details. The heavy-duty 8 aluminum inbuilt leveling bases with three knob leveling system add to the leveling capability and accuracy of the transit level. The foam-padded kit box for the lenses and vials ensures protection from the environmental hazards. The DeWalt DW092PK Factory Reconditioned 20x transit level package is a contractor-grade optical instrument best suited for manual long distance measurements that demand precision and accuracy in semi-large projects. It is ideal for landscaping, ground leveling, road and building construction, sewerage, drainage work and agricultural activities. With a magnification of 20 x, the DeWalt DW092PK transit level is manually accurate to per 100 ft with a maximum range of 200 ft. The standout features are its 360 horizontal circle with a 5-arc vernier scale for the purpose of accurate measurement of horizontal angles and an endless tangent drive usually found in auto levels and surveying instruments. The vertical angles are determined by the transit capability of the tool. The DeWalt DW092PK comes with a stadia ratio of 1100 for determining topographic details. The heavy-duty 8 aluminum inbuilt leveling bases with three knob leveling system add to the leveling capability and accuracy of the transit level. The foam-padded kit box for the lenses and vials ensures protection from the environmental hazards.
219.99
Price: 219.99
|
 The DeWalt DC925K is an 18V Hammer Drill/Driver Tool Only with Case. It has a powerful 18V combination tool for heavy-duty hammerdrilling and screwdriving applications. There are three speed settings for optimum performance in high torque, normal use and high speed applications. In addition, the 22-position adjustable torque control allows for uniform results and optimized precision when screwdriving. You get superior bit-gripping strength with the 13 mm self-tightening chuck, which tightens throughout operation. You also get better control of the tool because of an electronic brake and the modular design,w hich gives you easy access to key components and serviceability. The high-performance fan-cooled motor is built for maximum power and durability with replaceable brushes. An all-around great tool with all the features youll need to get the job done right. The DeWalt DC925K is an 18V Hammer Drill/Driver Tool Only with Case. It has a powerful 18V combination tool for heavy-duty hammerdrilling and screwdriving applications. There are three speed settings for optimum performance in high torque, normal use and high speed applications. In addition, the 22-position adjustable torque control allows for uniform results and optimized precision when screwdriving. You get superior bit-gripping strength with the 13 mm self-tightening chuck, which tightens throughout operation. You also get better control of the tool because of an electronic brake and the modular design,w hich gives you easy access to key components and serviceability. The high-performance fan-cooled motor is built for maximum power and durability with replaceable brushes. An all-around great tool with all the features youll need to get the job done right.
99.99
Price: 99.99
|
|
|
| DeWalt D26451K Heavy-Duty 5Inch Random Orbit Sander Kit, 12000 OPM, 3.0 Amps | DeWalt D26453K Heavy-Duty 5Inch Variable Speed Random Orbit Sander Kit, 7000-12000 OPM, 3.0 Amps |
 The DeWalt D26451K random orbit sander has a 3.0 Amp motor which deliver 12000 OPM. The D26451K random orbit sander features the Controlled Finishing System (CFS), exclusive to DeWalt. CFS mechanically controls pad speed and minimizes material gouging that can occur during start up. The random orbit sander offer a 3/32 orbit diameter that provides an optimal pad swath for the progressive removal of material. To increase durability. The tool features a DeWalt built and designed motor, dust sealed switch to prevent contamination as well as 100% sealed ball bearing construction, which provide longer life for the tool. In addition to the rubber grip, the sander is also equipped with a dual-plane counter-balanced fan that mechanically reduces vibration further and, in turn, decreases the likelihood of operator fatigue.The DeWalt D26451K random orbit sander has a 3.0 Amp motor which deliver 12000 OPM. The D26451K random orbit sander features the Controlled Finishing System (CFS), exclusive to DeWalt. CFS mechanically controls pad speed and minimizes material gouging that can occur during start up. The random orbit sander offer a 3/32 orbit diameter that provides an optimal pad swath for the progressive removal of material. To increase durability. The tool features a DeWalt built and designed motor, dust sealed switch to prevent contamination as well as 100% sealed ball bearing construction, which provide longer life for the tool. In addition to the rubber grip, the sander is also equipped with a dual-plane counter-balanced fan that mechanically reduces vibration further and, in turn, decreases the likelihood of operator fatigue.
69.99
Price: 69.99
|
 The DeWalt D26453K random orbit sander has a 3.0 Amp motor that deliver a variable speed range of 7000-12000 OPM. The D2645K3 random orbit sander features the Controlled Finishing System (CFS). The CFS mechanically controls pad speed and minimizes material gouging that can occur during start up. The random orbit sander offer a 3/32 orbit diameter that provides an optimal pad swath for the progressive removal of material. To increase durability, the tool has a DeWalt built and designed motor, dust sealed switch to prevent contamination as well as 100% sealed ball bearing construction. In addition to the rubber grip, the sander is also equipped with a dual-plane counter-balanced fan that mechanically reduces vibration further and, in turn, decreases the likelihood of user fatigue.The DeWalt D26453K random orbit sander has a 3.0 Amp motor that deliver a variable speed range of 7000-12000 OPM. The D2645K3 random orbit sander features the Controlled Finishing System (CFS). The CFS mechanically controls pad speed and minimizes material gouging that can occur during start up. The random orbit sander offer a 3/32 orbit diameter that provides an optimal pad swath for the progressive removal of material. To increase durability, the tool has a DeWalt built and designed motor, dust sealed switch to prevent contamination as well as 100% sealed ball bearing construction. In addition to the rubber grip, the sander is also equipped with a dual-plane counter-balanced fan that mechanically reduces vibration further and, in turn, decreases the likelihood of user fatigue.
89.00
Price: 89.00
|
|
|
| DeWalt DW9083 18V Flashlight Replacement Bulb - 2 Pack | Black & Decker� U1450 5Inch Polishing/Sander Kit |
 The DeWalt DW9083 is a pack of 2 18V Flashlight Replacement Bulbs. The bulbs are used with DeWalt DW919, DW908, 18V Flashlights and 36V DC509 Flashlight. The extra-bright DeWalt 18V Replacement Bulb is made with Xenon, supplying 325 lumens. The flashlight bulbs come two to a pack.The DeWalt DW9083 is a pack of 2 18V Flashlight Replacement Bulbs. The bulbs are used with DeWalt DW919, DW908, 18V Flashlights and 36V DC509 Flashlight. The extra-bright DeWalt 18V Replacement Bulb is made with Xenon, supplying 325 lumens. The flashlight bulbs come two to a pack.
10.99
Price: 10.99
|
 4-piece polishing/sander kit Includes wheel arbor backing pad polishing bonnet sanding disc Not intended for industrial use4-piece polishing/sander kit Includes wheel arbor backing pad polishing bonnet sanding disc Not intended for industrial use
6.99
Price: 6.99
|
|
|
| DeWalt D51845R Factory Reconditioned D51845 20-Degree Full Round Head Framing Nailer | DeWalt DC011 Heavy-Duty Worksite Radio/Charger |
 DeWalts D51845 full round-head framing nailer weighs less than the competition and has more power to sink nails into the toughest building materials. Weighing in at just 7.6 pounds, it is constructed using magnesium and titanium to minimize weight while adding durability to withstand extreme job site abuse. In addition, at 12-3/4 inch tall, the nailer is compact enough to drive nails in even the tightest openings. DeWalts unique internal valve design generates plenty of power with minimum recoil for driving nails into hard materials such as laminated engineered lumbers. For lighter applications, such as sheathing and decking, nail depth is controlled with an innovative tool-free pushbutton adjustment, eliminating the need for special wrenches or changes in air pressure to set nail heads flush. DeWalts D51845 full round-head framing nailer weighs less than the competition and has more power to sink nails into the toughest building materials. Weighing in at just 7.6 pounds, it is constructed using magnesium and titanium to minimize weight while adding durability to withstand extreme job site abuse. In addition, at 12-3/4 inch tall, the nailer is compact enough to drive nails in even the tightest openings. DeWalts unique internal valve design generates plenty of power with minimum recoil for driving nails into hard materials such as laminated engineered lumbers. For lighter applications, such as sheathing and decking, nail depth is controlled with an innovative tool-free pushbutton adjustment, eliminating the need for special wrenches or changes in air pressure to set nail heads flush.
188.99
Price: 188.99
|
 Good music is the only sure-shot way to make hard work more enjoyable. The DeWalt DC 011 charges 7.2V to 18V NiCd/NIMH batteries (except Univolt) in an hour and also plays stereo or AM radio. The 11-inch, dual pivoting flexible antenna of this work site radio charger ensures better reception. The heavy duty charger features a digital tuner with an LCD display, a built-in clock and 8 station presets.DeWalt DC011 work site charger sports oversized buttons and knobs, which is a boon at the worksite, as it can be operated with the gloves on. It has an AUX in port that allows an mp3 or CD player, or portable satellite receiver to be connected. The DC011 radio charger uses DeWalt 7.2 V to 18 V rechargeable batteries, and thus is as good as a cordless radio. The speakers deliver maximum bass and are also weather resistant.As a heavy duty charger too, the DeWalt DC011 is quite convenient as the weather sealed charger door opens quite easily to facilitate faster battery changes. This Heavy-Duty Worksite Radio/Charger is just ideal for charging your batteries as well as listening to music, whether at tough job site conditions, inside your store or even at home.Good music is the only sure-shot way to make hard work more enjoyable. The DeWalt DC 011 charges 7.2V to 18V NiCd/NIMH batteries (except Univolt) in an hour and also plays stereo or AM radio. The 11-inch, dual pivoting flexible antenna of this work site radio charger ensures better reception. The heavy duty charger features a digital tuner with an LCD display, a built-in clock and 8 station presets.DeWalt DC011 work site charger sports oversized buttons and knobs, which is a boon at the worksite, as it can be operated with the gloves on. It has an AUX in port that allows an mp3 or CD player, or portable satellite receiver to be connected. The DC011 radio charger uses DeWalt 7.2 V to 18 V rechargeable batteries, and thus is as good as a cordless radio. The speakers deliver maximum bass and are also weather resistant.As a heavy duty charger too, the DeWalt DC011 is quite convenient as the weather sealed charger door opens quite easily to facilitate faster battery changes. This Heavy-Duty Worksite Radio/Charger is just ideal for charging your batteries as well as listening to music, whether at tough job site conditions, inside your store or even at home.
139.99
Price: 139.99
|
|
|
| DeWalt D55153R Factory Reconditioned D55153 1.1-Horsepower 4-Gallon Electric Hand Carry Twin Stack Compressor | Grip 90120 7 Pc. Super Thin Wrench SAE |
 The DeWalt D55153 is a factory reconditioned 1.1 HP 4 Gallon Electric Hand Carry Twin Stack Compressor. The electric compressor packs all the air needed plus high-quality features into a small, lightweight unit. Delivering 3.8 cu-ft. per minute at 100 PSI, the stacked tank unit with U.S. fittings and an overload-protected motor is designed to exceed any contractors expectations. The D55153 is oil-lubricated with a cast-iron cylinder to ensure that it is built for long life. The compressor includes the initial fill of DeWalt synthetic air compressor oil with regulator. The DeWalt D55153 is a factory reconditioned 1.1 HP 4 Gallon Electric Hand Carry Twin Stack Compressor. The electric compressor packs all the air needed plus high-quality features into a small, lightweight unit. Delivering 3.8 cu-ft. per minute at 100 PSI, the stacked tank unit with U.S. fittings and an overload-protected motor is designed to exceed any contractors expectations. The D55153 is oil-lubricated with a cast-iron cylinder to ensure that it is built for long life. The compressor includes the initial fill of DeWalt synthetic air compressor oil with regulator.
217.34
Price: 217.34
|
 -Drop forged, heat treated steel-Chrome plated for added durability and to resist rust and corrosion-Thin, but extra strong design, to reach confined working areas where traditional wrenches cannot reach-Drop forged, heat treated steel-Chrome plated for added durability and to resist rust and corrosion-Thin, but extra strong design, to reach confined working areas where traditional wrenches cannot reach
14.99
Price: 14.99
|
|
|
| Grip 12705 3/8-Inch x 50-Foot Rubber Air Hose | Grip 14012 1/2Inch to 1Inch Air Pin Nailer, 23 Gauge, 120 PSI |
The Grip 12705 is a 3/8-Inch x 50-Foott Rubber Air Hose Gray.The Grip 12705 is a 3/8-Inch x 50-Foott Rubber Air Hose Gray.
17.99
Price: 17.99
|
 -Nail length regulator automatically sets nails to desired pin length-Used to install window frames, door frames, molding and more-Single sequential safety trip mechanism-Depth adjustment for flush or below level-Nail length regulator automatically sets nails to desired pin length-Used to install window frames, door frames, molding and more-Single sequential safety trip mechanism-Depth adjustment for flush or below level
35.99
Price: 35.99
|
|
|
| Grip 16238 Trailer Hitch Locking Receiver Pin | Grip 18103 1 Ton Chain Hoist |
 Plastic lock coverChrome plated pinKeyed lock5/8 diameter for use with 2 x 2 receiversPlastic lock coverChrome plated pinKeyed lock5/8 diameter for use with 2 x 2 receivers
8.99
Price: 8.99
|
 Excellent way to lift and move heavy objects 10 lift, 2000 lbs. weight capacity Drop forged hooks Excellent way to lift and move heavy objects 10 lift, 2000 lbs. weight capacity Drop forged hooks
39.99
Price: 39.99
|
|
|
| Grip 19060 4 Ton Porta Power | Grip 22102 1-1/2Inch - 2-1/2Inch Tail Pipe Expander |
 Complete kit for a variety of auto body, frame repair and construction jobs Hydraulic equipment needed for lifting, pushing, pulling, bending, straightening and spreading Includes 4 ton ram and hydraulic pump, extension tubes, serrates saddle, v-base, wedge head, plunger, ram toes, 1/2 ton capacity spreader, flat base, and storage case Complete kit for a variety of auto body, frame repair and construction jobs Hydraulic equipment needed for lifting, pushing, pulling, bending, straightening and spreading Includes 4 ton ram and hydraulic pump, extension tubes, serrates saddle, v-base, wedge head, plunger, ram toes, 1/2 ton capacity spreader, flat base, and storage case
119.99
Price: 119.99
|
 A must for muffler shops Designed to quickly and easily straighten out dents in mufflers and tailpipes Rugger tool made of the toughest steel For 1-1/2 to 2-1/2 diameter pipes A must for muffler shops Designed to quickly and easily straighten out dents in mufflers and tailpipes Rugger tool made of the toughest steel For 1-1/2 to 2-1/2 diameter pipes
16.99
Price: 16.99
|
|
|
| Grip 22124 10-in-1 Universal Trim Tool | Grip 23032 25' x 4Inch Tow Strap with End Hooks |
 Made of tempered spring steel Ideal for people specializing in car interior work 10 uses Molding remover, windshield wiper wrench, door rubber metal clip inseter, door weather strip clip remover, door trim bezel clip remover, door handle clip remover, headlamp spring tool, windshield molding remover, door rubber plastic clip remover, and serrated edge for panel seam clean up Made of tempered spring steel Ideal for people specializing in car interior work 10 uses Molding remover, windshield wiper wrench, door rubber metal clip inseter, door weather strip clip remover, door trim bezel clip remover, door handle clip remover, headlamp spring tool, windshield molding remover, door rubber plastic clip remover, and serrated edge for panel seam clean up
5.99
Price: 5.99
|
 Super strong strap made of nylon 66 webbing by DuPont Ideal for cars, trucks, boats, farm, or home use Heavy duty, drop forged, heat treated end hooks 15,000 lb. towing capacity. 25 ft. long, 4 wide strap.Available only in assorted colors, you may receive yellow, red, or blue upon delivery Super strong strap made of nylon 66 webbing by DuPont Ideal for cars, trucks, boats, farm, or home use Heavy duty, drop forged, heat treated end hooks 15,000 lb. towing capacity. 25 ft. long, 4 wide strap.Available only in assorted colors, you may receive yellow, red, or blue upon delivery
27.99
Price: 27.99
|
|
|
| Grip 27135 10Inch Wire Brush | Grip 28022 6Inch Ball Bungee Cords (Pack of 12) |
 A must for use in the house or garage. Clean stubborn areas with this tough wire brush.Steel wires are tough enough to scrape off dirt, rust, paint, and grime. Ideal for cleaning barbecues.Hardened and tempered carbon steel bristles. Plastic handle for a comfortable grip.A must for use in the house or garage. Clean stubborn areas with this tough wire brush.Steel wires are tough enough to scrape off dirt, rust, paint, and grime. Ideal for cleaning barbecues.Hardened and tempered carbon steel bristles. Plastic handle for a comfortable grip.
1.99
Price: 1.99
|
 Great for securing hose cables. Ideal for tying down tarps. Bungees have polyester covering 6 in length, pack of 12 Great for securing hose cables. Ideal for tying down tarps. Bungees have polyester covering 6 in length, pack of 12
2.99
Price: 2.99
|
|
|
| Grip 28641 4pc 1Inch x 6' Buckle Tie Down Set | Grip 31078 12Inch Heavy Duty C-Clamp |
 Double vinyl-coated steel S hooks provide a secure hold w/out scratchesTrouble free, push-button quick release buckle camWeather resistant, 1 inch wide nylon webbing for maximum strengthDurable 6-foot strap will not loosen with road vibrationsDouble vinyl-coated steel S hooks provide a secure hold w/out scratchesTrouble free, push-button quick release buckle camWeather resistant, 1 inch wide nylon webbing for maximum strengthDurable 6-foot strap will not loosen with road vibrations
8.99
Price: 8.99
|
 Holds parts firmly for guing, nailing, frilling, welding, cutting, and bending Super heavy duty for either industrial or commercial use Sliding T-bar handles, malleable steel frames Chrome plated steel screw and swivel pad Holds parts firmly for guing, nailing, frilling, welding, cutting, and bending Super heavy duty for either industrial or commercial use Sliding T-bar handles, malleable steel frames Chrome plated steel screw and swivel pad
15.99
Price: 15.99
|
|
|
| Grip 35385 25-Piece HSS Brad Point Drill Bit Set | Grip 35393 3pc 25Inch Wood Drill Bit Set |
 Super sharp flutes actually shave the wood to a smooth polished finish Will not clog, bind, or tear wood grain in even the softest blasa wood Specialty brad points keep the tip from walking off of the mark 3/8 shanks Includes Sizes 1/8 to 1/2 in 1/64 increments and blow molded storage case Super sharp flutes actually shave the wood to a smooth polished finish Will not clog, bind, or tear wood grain in even the softest blasa wood Specialty brad points keep the tip from walking off of the mark 3/8 shanks Includes Sizes 1/8 to 1/2 in 1/64 increments and blow molded storage case
16.99
Price: 16.99
|
 Tapered drill bits with a countersink and adjustable stop collarIncludes wrench to adjust collars and handy storage casePrecision-sharpened high-speed steel for smooth cutsTapered drill bits with a countersink and adjustable stop collarIncludes wrench to adjust collars and handy storage casePrecision-sharpened high-speed steel for smooth cuts
8.99
Price: 8.99
|
|
|
| Grip 37128 28-Piece Electrical Clip Kit - With Alligator and Charging Clips | Grip 37240 LED Aluminum Flashlight |
 Repair broken leads on test equipment and chargers Make your own low voltage jumper leads Includes 6 pc 2 alligator clips, 6 pc 1-1/2 alligator clips, 10 pc mini alligator clips, 2 pc 30 amp charging clips, 2 pc 25 amp charging clips, and 2 pc 10 amp charging clips Repair broken leads on test equipment and chargers Make your own low voltage jumper leads Includes 6 pc 2 alligator clips, 6 pc 1-1/2 alligator clips, 10 pc mini alligator clips, 2 pc 30 amp charging clips, 2 pc 25 amp charging clips, and 2 pc 10 amp charging clips
4.99
Price: 4.99
|
 -Space age, solid state circuitry allows flashlight to remain on continuously for over 20 hours-Water proof, shock resistant housing.-Industrial grade switch rated for 10,000 on/off operations-Four high intensity, super bright LED light bulbs.-Includes 3AAA batteries-Space age, solid state circuitry allows flashlight to remain on continuously for over 20 hours-Water proof, shock resistant housing.-Industrial grade switch rated for 10,000 on/off operations-Four high intensity, super bright LED light bulbs.-Includes 3AAA batteries
5.44
Price: 5.44
|
|
|
| Grip 41520 5-Piece Fiberglass Ball Pein Hammer Set W/Case | Grip-On-Tools 52026 Rolling Knee Dolly |
 Precision machined face and pein, drop forged, heat treated steelHigh visiblity rubber contoured fiberglass handle for comfortable gripEpoxy wedge holds head firmlySet contains 8oz, 12oz, 16oz, 24oz, 32oz hammers and carrying casePrecision machined face and pein, drop forged, heat treated steelHigh visiblity rubber contoured fiberglass handle for comfortable gripEpoxy wedge holds head firmlySet contains 8oz, 12oz, 16oz, 24oz, 32oz hammers and carrying case
18.99
Price: 18.99
|
 -Protect knees from hard surfaces and provide maximum mobility while installing carpet, working on brakes and car detailing, gardening, and more. features comfortable knee padding, 3 wide magnetic tool tray, and six 2 PVC swivel casters.-Protect knees from hard surfaces and provide maximum mobility while installing carpet, working on brakes and car detailing, gardening, and more. features comfortable knee padding, 3 wide magnetic tool tray, and six 2 PVC swivel casters.
34.99
Price: 34.99
|
|
|
| Grip 52033 Heavy Duty Mover's Dolly | Grip 53390 Pen Style Telescoping Magnetic Pick Up Tool - Holds 5 lbs. |
 Easy way to move heavy objectsSoft cushions protect bottom surface of object from damageEasy way to move heavy objectsSoft cushions protect bottom surface of object from damage
49.99
Price: 49.99
|
 Pen style Ideal for retrieving metal objects from hard to reach areas Extends to 31 Powerful magnet holds up to 5 lbs. Pen style Ideal for retrieving metal objects from hard to reach areas Extends to 31 Powerful magnet holds up to 5 lbs.
2.99
Price: 2.99
|
|
|
| Grip 54080 Multi Surface Push Broom | Grip 56030 2-Piece Mini Locking Pliers Set |
 Bolted connection prevents handle form loosening Extra thick foam comfort grip Swivel hanger tip for easy storage Maximum filled, long lasting bristles Top quality laquered hardwood block Works great on smooth or rough surfaces including concrete, tile, and slate 58 steel handle Bolted connection prevents handle form loosening Extra thick foam comfort grip Swivel hanger tip for easy storage Maximum filled, long lasting bristles Top quality laquered hardwood block Works great on smooth or rough surfaces including concrete, tile, and slate 58 steel handle
11.99
Price: 11.99
|
 Professional qualityHeat treated, drop forged steel. Nickel plated.Includes One regular locking plier and one long nose locking plierProfessional qualityHeat treated, drop forged steel. Nickel plated.Includes One regular locking plier and one long nose locking plier
3.99
Price: 3.99
|
|
|
| Grip 61280 28-Piece Transfer Punch Set | Grip 62100 100pc Security Screwdriver Bit Set |
 Heat treated tempered steel with industrial black oxide finish Ideal for tool makers and machinists Includes 3/32 to 1/2 (by 1/64) punches in stand Heat treated tempered steel with industrial black oxide finish Ideal for tool makers and machinists Includes 3/32 to 1/2 (by 1/64) punches in stand
16.99
Price: 16.99
|
 Fits all corded and cordless brands of drillsIncludes a heavy duty kit box with metal latchesIncludes the most commonly used bits and accessoriesRapid load holder for quick and fast accessory changesMagnetic driver guides reduce stripping and wobbleBlack oxide drill bits feature 135 degree split point tips that start drilling on contactIncludes Rapid Load Chuck, Magnetic driver guide, Pilot Point drill bits, Screwdriver bits, Sockets, Drywall dimplers, Nutdrivers and kit boxFits all corded and cordless brands of drillsIncludes a heavy duty kit box with metal latchesIncludes the most commonly used bits and accessoriesRapid load holder for quick and fast accessory changesMagnetic driver guides reduce stripping and wobbleBlack oxide drill bits feature 135 degree split point tips that start drilling on contactIncludes Rapid Load Chuck, Magnetic driver guide, Pilot Point drill bits, Screwdriver bits, Sockets, Drywall dimplers, Nutdrivers and kit box
9.99
Price: 9.99
|
|
|
| Grip 73580 15-Piece 1/2Inch Drive Deep Impact Socket Set - SAE | Grip 77215 50' Fish Tape |
 Drop forged, heat treated, chrome vandium steelBlack oxide finish resists rust and corrosionMeets of exceeds ANSI specs B107.2Drop forged, heat treated, chrome vandium steelBlack oxide finish resists rust and corrosionMeets of exceeds ANSI specs B107.2
34.99
Price: 34.99
|
 Soring steel tape helps thread cables and wire through drywall, conduit, and insulation Reel winds up and stores excess tape as wire is pulled Built in thumb lock holds wire in place 50 ft. long tape Soring steel tape helps thread cables and wire through drywall, conduit, and insulation Reel winds up and stores excess tape as wire is pulled Built in thumb lock holds wire in place 50 ft. long tape
9.99
Price: 9.99
|
|
|
| Grip 77240 1000' Measuring Wheel | Grip 85240 9Inch MIG Weld Pliers |
 Take accurate measurements without the hassle of a measuring tapeCounter with reset button measures up to 1000 ft.Rubber wheels with PVC rimsHandle extends to 26-1/4 length. 5-5/8 diameter wheel.Actual product may varyTake accurate measurements without the hassle of a measuring tapeCounter with reset button measures up to 1000 ft.Rubber wheels with PVC rimsHandle extends to 26-1/4 length. 5-5/8 diameter wheel.Actual product may vary
11.99
Price: 11.99
|
 Drop forged, heat treated Heavy insulated grip for comfort Spring loaded handle Small serrated hole MIG tips Wire cutter for trimming MIG wire Large serrated holes for nozzles Drop forged, heat treated Heavy insulated grip for comfort Spring loaded handle Small serrated hole MIG tips Wire cutter for trimming MIG wire Large serrated holes for nozzles
7.99
Price: 7.99
|
|
|
| Grip 89340 15-Piece Combination Wrench Set - MM | Grip 90150 14-Piece 1/2Inch Drive Jumbo Crowfoot Wrench Set - SAE |
 Heat treated, chrome plated, drop forged carbon steel Buffed to a mirror polished finish - high polish finish resists corrosion Precsion machined 15 degree open and 12 point box ends Includes 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm, 23mm, and 24mm wrenches in heavy duty roll-up storage pouch Heat treated, chrome plated, drop forged carbon steel Buffed to a mirror polished finish - high polish finish resists corrosion Precsion machined 15 degree open and 12 point box ends Includes 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm, 23mm, and 24mm wrenches in heavy duty roll-up storage pouch
21.99
Price: 21.99
|
Drop forged, heat treated, chrome plated carbon steelWorks where conventional sockets and wrenches cannot reachIncludes 1-1/16 inch, 1-1/8 inch, 1-3/16 inch, 1-1/4 inch, 1-5/16 inch, 1-3/8 inch, 1-7/16 inch, 1-1/2 inch, 1-5/8 inch, 1-11/16 inch, 1-3/4 inch, 1-13/16 inch, 1-7/8 inch, and 2 inch crowfoot wrenches in blow molded storage trayDrop forged, heat treated, chrome plated carbon steelWorks where conventional sockets and wrenches cannot reachIncludes 1-1/16 inch, 1-1/8 inch, 1-3/16 inch, 1-1/4 inch, 1-5/16 inch, 1-3/8 inch, 1-7/16 inch, 1-1/2 inch, 1-5/8 inch, 1-11/16 inch, 1-3/4 inch, 1-13/16 inch, 1-7/8 inch, and 2 inch crowfoot wrenches in blow molded storage tray
61.99
Price: 61.99
|
|
|
| Grip 92155 12-Piece Jumbo Hex Key Set - SAE & MM | Milwaukee 0719-22 V28 28-Volt Lithium-Ion Cordless Sawzall Reciprocating Saw Kit |
 Heat treated chrome vandium steel with black oxide finish Professional quality Ideal for use on large machinery Includes 3/8, 7/16, 1/2, 9/16, 5/8, 3/4, 8mm, 10mm, 12mm, 14mm, 17mm, and 19mm hex keys in blow molded storage case Heat treated chrome vandium steel with black oxide finish Professional quality Ideal for use on large machinery Includes 3/8, 7/16, 1/2, 9/16, 5/8, 3/4, 8mm, 10mm, 12mm, 14mm, 17mm, and 19mm hex keys in blow molded storage case
21.99
Price: 21.99
|
 The Milwaukee 0719 Cordless V28 Sawzall Reciprocating Saw uses a high-powered Milwaukee-built motor to deliver faster cutting and performance. Powering the 0719 is the revolutionary 28-volt lithium-ion battery pack, exclusively from Milwaukee. The 28-volt battery pack weighs less than an 18-volt pack, yet delivers two times the run-time, making this the ideal solution in cordless reciprocating saws. The battery is positioned so that it does not interfere with plunge cutting capabilities. This Sawzall saw has a 1-1/8 in. stroke length that delivers speed. The variable speed trigger delivers two levels of speed range: 0-2000 spm for metal cutting and other hard materials and 0-3000 spm for cutting in wood and other materials encountered. The gear protecting clutch protects the tool against impact, delivering on the legendary Sawzall durability. The keyless shoe adjustment allows for better control in cutting and longer blade life. The QUIK-LOK blade clamp makes changing blades a snap. A comfortable non-slip soft grip handle provides a better gripping surface and reduces vibration and operator fatigue.The Milwaukee 0719 Cordless V28 Sawzall Reciprocating Saw uses a high-powered Milwaukee-built motor to deliver faster cutting and performance. Powering the 0719 is the revolutionary 28-volt lithium-ion battery pack, exclusively from Milwaukee. The 28-volt battery pack weighs less than an 18-volt pack, yet delivers two times the run-time, making this the ideal solution in cordless reciprocating saws. The battery is positioned so that it does not interfere with plunge cutting capabilities. This Sawzall saw has a 1-1/8 in. stroke length that delivers speed. The variable speed trigger delivers two levels of speed range: 0-2000 spm for metal cutting and other hard materials and 0-3000 spm for cutting in wood and other materials encountered. The gear protecting clutch protects the tool against impact, delivering on the legendary Sawzall durability. The keyless shoe adjustment allows for better control in cutting and longer blade life. The QUIK-LOK blade clamp makes changing blades a snap. A comfortable non-slip soft grip handle provides a better gripping surface and reduces vibration and operator fatigue.
379.99
Price: 379.99
|
|
|
| Milwaukee 6509-82 Factory Reconditioned 10 Amps Sawzall Reciprocating Saw, 0-2800 SPM | Milwaukee 49-22-4105 19-pc Master Electricians Ice Hardened |
 The Milwaukee 6509-82 Factory Reconditioned 10 Amp Sawzall Reciprocating Saw is the most durable reciprocating saw on the market, and at only 7 pounds, it offers the best power to weight ratio in its class. This Milwaukee reciprocating saw offers a 0-2800 strokes per minute variable speed trigger with 3/4 inch stroke length and a Quik-Lok blade clamp for fast, tool-less blade changes. The Milwaukee 6509-82's rubber boot provides superior gripping and the adjustable shoe provides longer blade life and more cut control. The Milwaukee 6509-82 reciprocating saw's blades can even be clamped upside down for special cutting needs.The Milwaukee 6509-82 Factory Reconditioned 10 Amp Sawzall Reciprocating Saw is the most durable reciprocating saw on the market, and at only 7 pounds, it offers the best power to weight ratio in its class. This Milwaukee reciprocating saw offers a 0-2800 strokes per minute variable speed trigger with 3/4 inch stroke length and a Quik-Lok blade clamp for fast, tool-less blade changes. The Milwaukee 6509-82's rubber boot provides superior gripping and the adjustable shoe provides longer blade life and more cut control. The Milwaukee 6509-82 reciprocating saw's blades can even be clamped upside down for special cutting needs.
89.99
Price: 89.99
|
 Milwaukee's 49-22-4105 19 piece Master Electricians Ice Hardened trade Hole Saw Kit is perfect for a cleaner more consistent cut. The Ice Hardened trade products are made from a cryogenic hardening process rather than heat to create a more durable and longer lasting hole sawMilwaukee's 49-22-4105 19 piece Master Electricians Ice Hardened trade Hole Saw Kit is perfect for a cleaner more consistent cut. The Ice Hardened trade products are made from a cryogenic hardening process rather than heat to create a more durable and longer lasting hole saw
129.99
Price: 129.99
|
|
|
| Milwaukee 49-22-4185 28-Piece All-Purpose Professional Ice-Hardened Hole Saw Kit | Milwaukee 48-01-9712 Ice Hardened� 6Inch 10 TPI The Torch� SAWZ |
 Milwaukee's Ice-Hardened products utilize a proprietary cryogenic hardening process that improves upon traditional heat treat processes. Unlike surface coatings that wear away, cryogenics harden to the core by minimizing soft metal (austenite) and creating more hard metal (martensite). The result is a product that is more consistently hard throughout, resulting in life up to 50% longer than the competition.Milwaukee's Ice-Hardened products utilize a proprietary cryogenic hardening process that improves upon traditional heat treat processes. Unlike surface coatings that wear away, cryogenics harden to the core by minimizing soft metal (austenite) and creating more hard metal (martensite). The result is a product that is more consistently hard throughout, resulting in life up to 50% longer than the competition.
149.99
Price: 149.99
|
 The Milwaukee 48-01-9712 is an Ice Hardened� 6-Inch, 10 TPI Torch� SAWZALL� blade. Ice Edge� blades are processed with a patent pending cryogenic heat treatment so they can handle the toughest alloy steel materials. Unlike surface coatings that wear away, cryogenics harden to the core by minimizing soft metal (austenite) and creating more hard metal (martensite). The result is a product that is more consistently hard throughout. These blades are made from Matrix II bi-metal material with 8% cobalt. The bi-metal design allows for faster cutting, longer life blades that can bend without shattering.The Milwaukee 48-01-9712 is an Ice Hardened� 6-Inch, 10 TPI Torch� SAWZALL� blade. Ice Edge� blades are processed with a patent pending cryogenic heat treatment so they can handle the toughest alloy steel materials. Unlike surface coatings that wear away, cryogenics harden to the core by minimizing soft metal (austenite) and creating more hard metal (martensite). The result is a product that is more consistently hard throughout. These blades are made from Matrix II bi-metal material with 8% cobalt. The bi-metal design allows for faster cutting, longer life blades that can bend without shattering.
1.99
Price: 1.99
|
|
|
| Milwaukee 48-01-9784 Ice Hardened� 6Inch 18 TPI The Torch� SAWZ | Milwaukee 48-01-9782 Ice Hardened� 6Inch 14 TPI The Torch� SAWZ |
 The Milwaukee 48-01-9784 is an Ice Hardened� 6-Inch, 18 TPI Torch� SAWZALL� blade. Ice Edge� blades are processed with a patent pending cryogenic heat treatment so they can handle the toughest alloy steel materials. Unlike surface coatings that wear away, cryogenics harden to the core by minimizing soft metal (austenite) and creating more hard metal (martensite). The result is a product that is more consistently hard throughout. These blades are made from Matrix II bi-metal material with 8% cobalt. The bi-metal design allows for faster cutting, longer life blades that can bend without shattering.The Milwaukee 48-01-9784 is an Ice Hardened� 6-Inch, 18 TPI Torch� SAWZALL� blade. Ice Edge� blades are processed with a patent pending cryogenic heat treatment so they can handle the toughest alloy steel materials. Unlike surface coatings that wear away, cryogenics harden to the core by minimizing soft metal (austenite) and creating more hard metal (martensite). The result is a product that is more consistently hard throughout. These blades are made from Matrix II bi-metal material with 8% cobalt. The bi-metal design allows for faster cutting, longer life blades that can bend without shattering.
1.99
Price: 1.99
|
 The Milwaukee 48-01-9712 is an Ice Hardened� 6-Inch, 14 TPI Torch� SAWZALL� blade. Ice Edge� blades are processed with a patent pending cryogenic heat treatment so they can handle the toughest alloy steel materials. Unlike surface coatings that wear away, cryogenics harden to the core by minimizing soft metal (austenite) and creating more hard metal (martensite). The result is a product that is more consistently hard throughout. These blades are made from Matrix II bi-metal material with 8% cobalt. The bi-metal design allows for faster cutting, longer life blades that can bend without shattering.The Milwaukee 48-01-9712 is an Ice Hardened� 6-Inch, 14 TPI Torch� SAWZALL� blade. Ice Edge� blades are processed with a patent pending cryogenic heat treatment so they can handle the toughest alloy steel materials. Unlike surface coatings that wear away, cryogenics harden to the core by minimizing soft metal (austenite) and creating more hard metal (martensite). The result is a product that is more consistently hard throughout. These blades are made from Matrix II bi-metal material with 8% cobalt. The bi-metal design allows for faster cutting, longer life blades that can bend without shattering.
1.99
Price: 1.99
|
|
|
| Milwaukee 0824-24E V18 Lithium Ion Cordless Hammer Drill Kit with 220V European Charger | Milwaukee 2691-22 M18 18-Volt Compact Drill & Impact |
 The Milwaukee 0824-24 V18� Hammer Drill with its Li-ion battery cuts up to 25 2-9/16 Inch selfeed bit holes per charge. High output motor provides 550 in-lbs. of torque. Patented reversible battery allows drill to fit in tight areas and optimizes balance while working overhead. 1/2 in. metal ratcheting chuck with carbide jaws provides superior bit grip. The Universal Li-ion/NiCd Charger will charge any 18V to 28V Milwaukee Battery in 1 hour or less. Tool is backwards compatible with existing Milwaukee NiCd 18V Batteries. We at Tool King are pleased to introduce this kit with a 220-volt European charger for our International customers.The Milwaukee 0824-24 V18� Hammer Drill with its Li-ion battery cuts up to 25 2-9/16 Inch selfeed bit holes per charge. High output motor provides 550 in-lbs. of torque. Patented reversible battery allows drill to fit in tight areas and optimizes balance while working overhead. 1/2 in. metal ratcheting chuck with carbide jaws provides superior bit grip. The Universal Li-ion/NiCd Charger will charge any 18V to 28V Milwaukee Battery in 1 hour or less. Tool is backwards compatible with existing Milwaukee NiCd 18V Batteries. We at Tool King are pleased to introduce this kit with a 220-volt European charger for our International customers.
349.99
Price: 349.99
|
 The Milwaukee 2691-22 is an 18-Volt Compact Drill & Impact. This M18 2-Tool Combo Kit Combines Power Tools and Accessories in a Convenient Carrying Case. The M18 Series is a revolutionary redesign of Lithium-Ion battery technology that allows Milwaukee&trade tools to deliver more power, with faster speeds and longer tool run times. The new M18 series tools are lighter and more compact than traditional Milwaukee&trade tools, which eliminates user fatigue and improves overall work. The M18 series batteries are designed to only work with M18 Series tools in order to maximize tool and battery efficiency.The Milwaukee 2691-22 is an 18-Volt Compact Drill & Impact. This M18 2-Tool Combo Kit Combines Power Tools and Accessories in a Convenient Carrying Case. The M18 Series is a revolutionary redesign of Lithium-Ion battery technology that allows Milwaukee&trade tools to deliver more power, with faster speeds and longer tool run times. The new M18 series tools are lighter and more compact than traditional Milwaukee&trade tools, which eliminates user fatigue and improves overall work. The M18 series batteries are designed to only work with M18 Series tools in order to maximize tool and battery efficiency.
199.00
Price: 199.00
|
|
|
| Milwaukee 2611-24P M18 18-Volt Hammerdrill Kit with Impact Driver and FREE Bare Tool or Battery by Mail-In Rebate! (exp. 6-30-09) | Milwaukee 0724-84 Factory Reconditioned Lithium-Ion 28V 1/2Inch Cordless Hammer Drill/Driver Kit Plus BONUS Milwaukee 48-89-1110 14-Piece Thunderbolt� Black and Bronze Drill Bit Set a $30 Value! |
 The Milwaukee 2611-24P is a 18-Volt Hammerdrill Kit W/ Impact. This kit includes two 18-Volt batteries and a charger all in a durable plastic case.The Milwaukee 2611-24P is a 18-Volt Hammerdrill Kit W/ Impact. This kit includes two 18-Volt batteries and a charger all in a durable plastic case.
339.99
Price: 339.99
|
 The Milwaukee 0724-84 is a factory reconditioned 28V 1/2" Hammer Drill Kit. The Milwaukee 0724-84 is powered by a 28-volt lithium-ion battery which doubles the run time compared to any other drill or driver in its category. The 0724-84 is ideal for drilling and driving applications capable of drilling larger holes and driving larger screws in less time than comparable drills.The Milwaukee 0724-84 drill uses a battery that can be loaded in a reverse position, which is particularly helpful while executing overhead jobs. This feature also helps to balance the tool and makes it easier to handle in such tight conditions. The high power motor delivers a torque of maximum 600 in-lbs and 0-1800 RPM. The Milwaukee 0724-84 offers reduced drill bit slippage- thanks to an all metal, single sleeve, ratcheting chuck with carbide jaws. The anti slip, soft grip design prevents user fatigue during prolonged work and provides for great comfort and ergonomics.This Milwaukee cordless drill also features a Clip Lock system that provides convenient positioning of drill by keeping it at arms length. The Milwaukee 0724-84 cordless drill is a great all-around drill for DIY'ers and professionals alike.The Milwaukee 0724-84 is a factory reconditioned 28V 1/2" Hammer Drill Kit. The Milwaukee 0724-84 is powered by a 28-volt lithium-ion battery which doubles the run time compared to any other drill or driver in its category. The 0724-84 is ideal for drilling and driving applications capable of drilling larger holes and driving larger screws in less time than comparable drills.The Milwaukee 0724-84 drill uses a battery that can be loaded in a reverse position, which is particularly helpful while executing overhead jobs. This feature also helps to balance the tool and makes it easier to handle in such tight conditions. The high power motor delivers a torque of maximum 600 in-lbs and 0-1800 RPM. The Milwaukee 0724-84 offers reduced drill bit slippage- thanks to an all metal, single sleeve, ratcheting chuck with carbide jaws. The anti slip, soft grip design prevents user fatigue during prolonged work and provides for great comfort and ergonomics.This Milwaukee cordless drill also features a Clip Lock system that provides convenient positioning of drill by keeping it at arms length. The Milwaukee 0724-84 cordless drill is a great all-around drill for DIY'ers and professionals alike.
279.99
Price: 279.99
|
|
|
| Milwaukee 49-17-0110 Contractor Parts Organizer Bag | Milwaukee 48-55-3530 Contractor Bag |
 6 oversized pocktes inside, 14 outside Draw cord lock for easy and secure cinching down Convenient carrying strap Made of rugged, lightweight, water-resistant material 6 oversized pocktes inside, 14 outside Draw cord lock for easy and secure cinching down Convenient carrying strap Made of rugged, lightweight, water-resistant material
11.99
Price: 11.99
|
 Milwaukee 48-55-3530 is a Contractor Bag. The soft side contractor bag is made of tough water resistant 600 denier material. It provides extra storage for job site tools and accessories. It has shoulder strap and dual handle straps for easy carrying.Milwaukee 48-55-3530 is a Contractor Bag. The soft side contractor bag is made of tough water resistant 600 denier material. It provides extra storage for job site tools and accessories. It has shoulder strap and dual handle straps for easy carrying.
21.99
Price: 21.99
|
|
|
| Milwaukee 49-17-0195 Heavy-Duty 33 Pocket/5 Piece Tool Belt | Acme� A815BL 1/4Inch Ball Foot Air Chuck |
 Milwaukee 49-17-0195 Heavy-Duty 33 Pocket/5 Piece Tool Belt is made from water-resistant 1800 Denier Ballistic Polyester Material. The Tool Belt features 33 total pockets of various sizes and shapes, large flat bottom pouches, speed square pockets in each large pouch and a detachable cell phone/2-way radio holder. It also comes with two heavy-duty die-cast tape measure holders that can accommodate up to a 30 ft. tape measure and a Milwaukee compact driver/drill.Milwaukee 49-17-0195 Heavy-Duty 33 Pocket/5 Piece Tool Belt is made from water-resistant 1800 Denier Ballistic Polyester Material. The Tool Belt features 33 total pockets of various sizes and shapes, large flat bottom pouches, speed square pockets in each large pouch and a detachable cell phone/2-way radio holder. It also comes with two heavy-duty die-cast tape measure holders that can accommodate up to a 30 ft. tape measure and a Milwaukee compact driver/drill.
49.99
Price: 49.99
|
 1/4 female NPT Close check for live air line use with non-gauged inflation Solid brass construction1/4 female NPT Close check for live air line use with non-gauged inflation Solid brass construction
3.99
Price: 3.99
|
|
|
| Porter-Cable CFBN125B Factory Reconditioned Brad Nailer and Air Compressor Combo Kit, 18 Gauge | Porter-Cable 712401005 2-1/2-Inch x 14-Inch 100-Grit Sanding Belts for the 371K Compact Belt Sander - 5 Pack |
 The Porter-Cable CFBN125B is a factory reconditioned brad nailer and air compressor combo kit. The brad reconditioned nailer features adjustable depth-of-drive, jam release mechanism, and tool-free quick-release nosepiece. A non-marring nose tip, hardened driver blade, side-load magazine and muffled adjustable exhaust port are some of the other salient features of Porter-Cable CFBN125B. This reconditioned nailer uses 18 gauge, 5/8 inch to 1-1/4 inch brad nails.The 0.8 running HP pancake compressor has a 10 Amp, 120V AC motor. It also has 150-PSI pressure to provide quicker recovery and 6 gallon capacity for longer tool run time, and the oil-free pump helps in making the compressor maintenance free. The Porter-Cable CFBN125B compressor comes with 25 ft. of 1/4-inch air hose with a coupler and plug nailer oil, and works on standard household current.This multipurpose nailer compressor combo kit can be widely used for nailing applications like rimming, moldings, paneling and furniture assembling.The Porter-Cable CFBN125B is a factory reconditioned brad nailer and air compressor combo kit. The brad reconditioned nailer features adjustable depth-of-drive, jam release mechanism, and tool-free quick-release nosepiece. A non-marring nose tip, hardened driver blade, side-load magazine and muffled adjustable exhaust port are some of the other salient features of Porter-Cable CFBN125B. This reconditioned nailer uses 18 gauge, 5/8 inch to 1-1/4 inch brad nails.The 0.8 running HP pancake compressor has a 10 Amp, 120V AC motor. It also has 150-PSI pressure to provide quicker recovery and 6 gallon capacity for longer tool run time, and the oil-free pump helps in making the compressor maintenance free. The Porter-Cable CFBN125B compressor comes with 25 ft. of 1/4-inch air hose with a coupler and plug nailer oil, and works on standard household current.This multipurpose nailer compressor combo kit can be widely used for nailing applications like rimming, moldings, paneling and furniture assembling.
139.99
Price: 139.99
|
 The Porter-Cable 712401005 is a 5-pack of 2-1/2" x 14" sanding belts. These sanding belts have a grit of 100 for fine sanding and can be used with the Porter-Cable 371K Compact Belt Sander, available right here at Tool King as a new unit and here as a factory-reconditioned unit. The Porter-Cable 712401005 is a 5-pack of 2-1/2" x 14" sanding belts. These sanding belts have a grit of 100 for fine sanding and can be used with the Porter-Cable 371K Compact Belt Sander, available right here at Tool King as a new unit and here as a factory-reconditioned unit.
11.99
Price: 11.99
|
|
|
| Porter-Cable 712401205 2-1/2-Inch x 14-Inch 120-Grit Sanding Belts for the 371K Compact Belt Sander - 5 Pack | Porter-Cable 712401805 2-1/2-Inch x 14-Inch 150-Grit Sanding Belts for the 371K Compact Belt Sander - 5 Pack |
The Porter-Cable 712401205 is a 5-pack of 2-1/2" x 14" sanding belts. These sanding belts have a grit of 120 for fine sanding and can be used with the Porter-Cable 371K Compact Belt Sander, available right here at Tool King as a new unit and here as a factory-reconditioned unit. The Porter-Cable 712401205 is a 5-pack of 2-1/2" x 14" sanding belts. These sanding belts have a grit of 120 for fine sanding and can be used with the Porter-Cable 371K Compact Belt Sander, available right here at Tool King as a new unit and here as a factory-reconditioned unit.
11.99
Price: 11.99
|
The Porter-Cable 712401805 is a 5-pack of 2-1/2" x 14" sanding belts. These sanding belts have a grit of 150 for fine sanding and can be used with the Porter-Cable 371K Compact Belt Sander, available right here at Tool King as a new unit and here as a factory-reconditioned unit. The Porter-Cable 712401805 is a 5-pack of 2-1/2" x 14" sanding belts. These sanding belts have a grit of 150 for fine sanding and can be used with the Porter-Cable 371K Compact Belt Sander, available right here at Tool King as a new unit and here as a factory-reconditioned unit.
11.99
Price: 11.99
|
|
|
| Porter-Cable 121 Portable Oscillating Spindle Sander, 2400-3600 RPM, 6.0 Amps | Porter-Cable 12855 6 inch, 40-Tooth Thin Kerf Riptide Saw Blade |
 The Porter-Cable 121 spindle sander features variable speed control which allows rotation from 2400 to 3600 RPM and 38 to 60 oscillations per minute for sanding a variety of materials including hard and soft woods, solid surfaces, laminates, plastics and marble. The beefy 6 Amp motor has plenty of power for all sanding applications. The included edge guide allows accurate, pre-set removal of material for jointing and edge-smoothing operations. The Porter-Cable 121 spindle sander features variable speed control which allows rotation from 2400 to 3600 RPM and 38 to 60 oscillations per minute for sanding a variety of materials including hard and soft woods, solid surfaces, laminates, plastics and marble. The beefy 6 Amp motor has plenty of power for all sanding applications. The included edge guide allows accurate, pre-set removal of material for jointing and edge-smoothing operations.
279.99
Price: 279.99
|
 The Porter-Cable 12855 is a 6 inch, 40-Tooth Thin Kerf Riptide Saw Blade. The thin-kerf design reduces drag on the motor and allows the saw to cut more effectively. The teeth are made of fine-grained tungsten-carbide to stay sharp longer. Each teeth is ground on all four exposed sides for maximum sharpness. Even though the blade is thinner than standard blades, the body is fully heat hardened and has computer-mapped cooling vents to maintain trueness. The Porter-Cable 12855 is a 6 inch, 40-Tooth Thin Kerf Riptide Saw Blade. The thin-kerf design reduces drag on the motor and allows the saw to cut more effectively. The teeth are made of fine-grained tungsten-carbide to stay sharp longer. Each teeth is ground on all four exposed sides for maximum sharpness. Even though the blade is thinner than standard blades, the body is fully heat hardened and has computer-mapped cooling vents to maintain trueness.
21.99
Price: 21.99
|
|
|
| Porter-Cable 42900PC 1 inches Core Box Router Bit | Porter-Cable 42901PC 3/16 inch Roundover Router Bit |
 The Porter-Cable 42900PC 1 inches Core Box is designed for reading, fluting and general ornamentation. It is especially effective in fluting flat surfaces. The Porter-Cable 42900PC 1 inches Core Box is designed for reading, fluting and general ornamentation. It is especially effective in fluting flat surfaces.
6.77
Price: 6.77
|
 The Porter-Cable 42901PC is a 3/16 inch Roundover Router Bit. The 42901PC router bit is designed for making smooth and uniformly rounded edges on the furniture. The Porter-Cable roundover router bit has a unique feature of lower depth setting which results in rounded corner with decorative fillet. The Porter-Cable 42901PC is a 3/16 inch Roundover Router Bit. The 42901PC router bit is designed for making smooth and uniformly rounded edges on the furniture. The Porter-Cable roundover router bit has a unique feature of lower depth setting which results in rounded corner with decorative fillet.
9.77
Price: 9.77
|
|
|
| Porter-Cable 42908PC 3/4 inch Core Box | Porter-Cable 42948PC 1/4 inch V-Groove Router Bit |
 Porter-Cable 42908PC 3/4 inch Core BoxFor Reeding, Fluting and General Ornamentation. Especially effective in Fluting Flat Surfaces Porter-Cable 42908PC 3/4 inch Core BoxFor Reeding, Fluting and General Ornamentation. Especially effective in Fluting Flat Surfaces
11.77
Price: 11.77
|
 The Porter-Cable 42948PC is a 1/4 inch Shank V-Groove Router Bit. The bit is excellent for front door grooving, lettering and sign work. It also simulates plank construction on panels. The Porter-Cable 42948PC is a 1/4 inch Shank V-Groove Router Bit. The bit is excellent for front door grooving, lettering and sign work. It also simulates plank construction on panels.
4.77
Price: 4.77
|
|
|
| Porter-Cable 43144PC 3/8 inch Core Box | Porter-Cable 43147PC 3/4 inch Core Box |
 Porter-Cable 43144PC 3/8 inch Core BoxFor Reeding, Fluting and General OrnamentationEspecially effective in Fluting Flat Surfaces Porter-Cable 43144PC 3/8 inch Core BoxFor Reeding, Fluting and General OrnamentationEspecially effective in Fluting Flat Surfaces
5.77
Price: 5.77
|
 Porter-Cable 43147PC 3/4 inch Core Box For Reeding, Fluting and General Ornamentation Especially effective in Fluting Flat Surfaces Porter-Cable 43147PC 3/4 inch Core Box For Reeding, Fluting and General Ornamentation Especially effective in Fluting Flat Surfaces
7.77
Price: 7.77
|
|
|
| Porter-Cable 43189PC 5/8 inch Straight-Cutting Double Flute Router Bit | Porter-Cable 43213PC 3/8-Inch 90� V-Groove Router Bit |
 The Porter-Cable 43189PC is a 5/8 inch Porter-Cable 43189PC 5/8 inch Straight-Cutting Double Flute Router Bit. The router bit is designed for general cutting including edge trimming and flat-bottomed grooves and dadoes. The double flute design of the bit provides superior balance and vibration-free cutting for a smoother finish and longer bit life. The Porter-Cable 43189PC bit is carbide-tipped for durability and long-lasting sharpness and fits all routers with 1/4 inch collets. The Porter-Cable 43189PC is a 5/8 inch Porter-Cable 43189PC 5/8 inch Straight-Cutting Double Flute Router Bit. The router bit is designed for general cutting including edge trimming and flat-bottomed grooves and dadoes. The double flute design of the bit provides superior balance and vibration-free cutting for a smoother finish and longer bit life. The Porter-Cable 43189PC bit is carbide-tipped for durability and long-lasting sharpness and fits all routers with 1/4 inch collets.
5.77
Price: 5.77
|
 The Porter-Cable 43213PC is a 3/8 inches 90 V-Groove Router Bit. Porter-Cable Professional Edge router bit is constructed of 4140 Alloy Steel, a harder grade of steel than standard cast steel bit bodies. The bit is annealed and heat treated to Rockwell hardness of 40-45, harder than is possible with cast steel bodies. The carbide tip is made from a specially blended micro grain carbide for superior results and longer lasting sharpness. The bit 5/8 inches in diameter or large has a chip limiting design which provides more cutting control, better balance and more body mass for a cleaner cut. A black oxide coating protects against corrosion while preventing resin build-up and improving chip clearance. The Porter-Cable 43213PC is a 3/8 inches 90 V-Groove Router Bit. Porter-Cable Professional Edge router bit is constructed of 4140 Alloy Steel, a harder grade of steel than standard cast steel bit bodies. The bit is annealed and heat treated to Rockwell hardness of 40-45, harder than is possible with cast steel bodies. The carbide tip is made from a specially blended micro grain carbide for superior results and longer lasting sharpness. The bit 5/8 inches in diameter or large has a chip limiting design which provides more cutting control, better balance and more body mass for a cleaner cut. A black oxide coating protects against corrosion while preventing resin build-up and improving chip clearance.
4.77
Price: 4.77
|
|
|
| Porter-Cable 43230PC 9/16 inch Straight Router Bit | Porter-Cable 43253PC 25� Bevel Laminate Trimming Router Bit |
 The Porter-Cable 43230PC is a 9/16 inch Straight Router Bit. The bit is designed for general stock removal where superior balance and vibration-free cutting provide a smoother finish and longer bit life. The Porter-Cable 43230PC is a 9/16 inch Straight Router Bit. The bit is designed for general stock removal where superior balance and vibration-free cutting provide a smoother finish and longer bit life.
5.77
Price: 5.77
|
 For trimming high-pressure plastic laminate countertop edges where a bevel is required For trimming high-pressure plastic laminate countertop edges where a bevel is required
7.77
Price: 7.77
|
|
|
| Porter-Cable 43300PC 5/16 inch Straight Router Bit | Porter-Cable 43326PC 5/8 inches Pattern Cutting Router Bit |
 The Porter-Cable 43300PC is a 5/16 inch 2 Flute Straight Router Bit. It is designed for general stock removal where superior balance and vibration-free cutting provides a smoother finish and longer bit life. The Porter-Cable 43300PC is a 5/16 inch 2 Flute Straight Router Bit. It is designed for general stock removal where superior balance and vibration-free cutting provides a smoother finish and longer bit life.
3.77
Price: 3.77
|
 The Porter-Cable 43326PC is a 5/8 inches Pattern Cutting Router Bit. It is designed for through-templet cuts where guiding with a ball bearing is desired. The Porter-Cable 43326PC is a 5/8 inches Pattern Cutting Router Bit. It is designed for through-templet cuts where guiding with a ball bearing is desired.
6.77
Price: 6.77
|
|
|
| Porter-Cable 43327PC 9/16 inch Straight Router Bit | Porter-Cable 43413PC 3/8 inches Beading Router Bit |
 The Porter-Cable 43327PC is a 9/16 inch 2 Flute Straight Router Bit. It is designed for general stock removal where superior balance and vibration-free cutting provides a smoother finish and longer bit life. The Porter-Cable 43327PC is a 9/16 inch 2 Flute Straight Router Bit. It is designed for general stock removal where superior balance and vibration-free cutting provides a smoother finish and longer bit life.
6.77
Price: 6.77
|
 For decorative period edging Pozi-Stop Shank Monster Carbide For decorative period edging Pozi-Stop Shank Monster Carbide
9.77
Price: 9.77
|
|
|
| Porter-Cable 43454PC 1/2 inches 10� Dovetail Router Bit | Porter-Cable 43514PC 45� Lock Miter Router Bit |
 1/2 inches dovetail profile10 angled flute1/2 inches shankCarbide-tipped for long lasting sharpness and durability 1/2 inches dovetail profile10 angled flute1/2 inches shankCarbide-tipped for long lasting sharpness and durability
6.77
Price: 6.77
|
 Create interlocking corner joints without having to change bit depth setting Monster Carbide Note Not for use in hand-held routers Create interlocking corner joints without having to change bit depth setting Monster Carbide Note Not for use in hand-held routers
21.77
Price: 21.77
|
|
|
| Porter-Cable 43597PC 1/4 inches Beading Router Bit | Porter-Cable 43692PC Tru-Match Solid Surface Bit |
 1/4 inches beading profile Ball-bearing pilot 1/2 inches flute length 1/2 inches shank Carbide-tipped for long lasting sharpness and durability 1/4 inches beading profile Ball-bearing pilot 1/2 inches flute length 1/2 inches shank Carbide-tipped for long lasting sharpness and durability
10.77
Price: 10.77
|
 The Porter-Cable 43692PC is a Tru-Match Solid Surface bit. The bit is designed to join solid surface materials with a seamless look. The 43692PC is used for producing self-aligning mating edges on solid surface materials. The specially shaped cutting edge of the Tru-Match router bit improves glue joints in three ways. The wavy cut allows perfect alignment of mating edges when used with the Tru-Match sub-base (sold separately). Also, because the glue joint is not a straight line, it is less obvious and tends to disappear for a seamless look. Finally, the wavy edge has more surface area for gluing, increasing the strength of the joint. The Porter-Cable 43692PC is a Tru-Match Solid Surface bit. The bit is designed to join solid surface materials with a seamless look. The 43692PC is used for producing self-aligning mating edges on solid surface materials. The specially shaped cutting edge of the Tru-Match router bit improves glue joints in three ways. The wavy cut allows perfect alignment of mating edges when used with the Tru-Match sub-base (sold separately). Also, because the glue joint is not a straight line, it is less obvious and tends to disappear for a seamless look. Finally, the wavy edge has more surface area for gluing, increasing the strength of the joint.
16.77
Price: 16.77
|
|
|
| Porter-Cable 43751PC Classical Router Bit | Porter-Cable 43816PC 1/4 inches Straight Solid Carbide Router Bit |
 Beautiful bead and cove combination provide a quality accent to any project. Pozi-stop shank Monster carbide Beautiful bead and cove combination provide a quality accent to any project. Pozi-stop shank Monster carbide
17.77
Price: 17.77
|
 1/4 inches straight cutting profile 3/4 inches flute length, single fluted for a more aggressive cut Cuts harder plastics, melamine and laminates 1/4 inches shank Solid carbide construction for long lasting sharpness and durability 1/4 inches straight cutting profile 3/4 inches flute length, single fluted for a more aggressive cut Cuts harder plastics, melamine and laminates 1/4 inches shank Solid carbide construction for long lasting sharpness and durability
5.77
Price: 5.77
|
|
|
| Porter-Cable 7800 Factory Reconditioned 4.7-Amp Long Reach Drywall Sander | RoboToolz RT-3620-2K Two Beam Rotating Laser System with Detector and Bracket |
 The Porter-Cable 7800 is a Factory Reconditioned 4.7 Amp Long Reach Drywall Sander. The sander is long enough to sand 10 ft. ceilings from the ground, lightweight (8 lbs) and able to suck up the vast majority of the fine, potentially harmful dust with an attachable vacuum. The 1-1/4 inches vacuum hose is 13 ft. long. It easily sands three times faster than hand-sanding-maybe even four times faster. The Porter-Cable 7800 is a Factory Reconditioned 4.7 Amp Long Reach Drywall Sander. The sander is long enough to sand 10 ft. ceilings from the ground, lightweight (8 lbs) and able to suck up the vast majority of the fine, potentially harmful dust with an attachable vacuum. The 1-1/4 inches vacuum hose is 13 ft. long. It easily sands three times faster than hand-sanding-maybe even four times faster.
369.99
Price: 369.99
|
 The RoboToolz RT-3620-2K Two Beam Rotating Laser System with Detector and Bracket has a spin, line dither / scan and dot modes for interior and exterior level, plumb and square applications. It has a squaring beam for 90 layouts.It operates at 3 rotational speeds, 50, 250, 600 RPMThe RoboToolz RT-3620-2K Two Beam Rotating Laser System with Detector and Bracket has a spin, line dither / scan and dot modes for interior and exterior level, plumb and square applications. It has a squaring beam for 90 layouts.It operates at 3 rotational speeds, 50, 250, 600 RPM
129.99
Price: 129.99
|
|
|
| RoboToolz RT-7715-2 Automatic Leveling 2-Beam, Level and Plumb Crossliner Laser | RoboToolz RT-A1150-123 Aluminum Contractor's Tripod |
 RoboToolz RT-7715-2 has a super High Visibility Beams, its 140 vertical and 120 horizontal fan angles gives you amazing line lengths for limitless layout versatility.RoboToolz RT-7715-2 has a super High Visibility Beams, its 140 vertical and 120 horizontal fan angles gives you amazing line lengths for limitless layout versatility.
139.99
Price: 139.99
|
 The RoboToolz RT-A1150-123 is a adjustable aluminum contractor tripod for contractors and surveyors alike. It is equipped with 3 precision bubble vials with protective cap. It also has a quick release leg clamps for easier and faster adjustment.The RoboToolz RT-A1150-123 is a adjustable aluminum contractor tripod for contractors and surveyors alike. It is equipped with 3 precision bubble vials with protective cap. It also has a quick release leg clamps for easier and faster adjustment.
69.99
Price: 69.99
|
|
|
| Irwin 1905 1/2InchPipe Tap | Hobart Welders 500425 Tigmate 230V AC/DC TIG & Stick Welder with Foot Control |
 Cuts internal threads in pipesNominal size of the tap is that of the pipe fitting being tappedAvailable in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP)Ideal for pipe fittingsTapered at a rate of 3/4 per footCuts internal threads in pipesNominal size of the tap is that of the pipe fitting being tappedAvailable in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP)Ideal for pipe fittingsTapered at a rate of 3/4 per foot
10.99
Price: 10.99
|
 The TIGMATE is a complete AC/DC, TIG and Stick welding package. The TIGMATE offers superior performance 18 gauge to 3/16 in. (1.2 to 4.8 mm) steel and stainless steel; 14 gauge to 3/16 in. (1.8 to 4.8 mm) aluminum. For thicker metals, take advantage of the Stick mode using 3/32 and 1/8 in. (2.4 and 3.2 mm) electrodes.The TIGMATE is a complete AC/DC, TIG and Stick welding package. The TIGMATE offers superior performance 18 gauge to 3/16 in. (1.2 to 4.8 mm) steel and stainless steel; 14 gauge to 3/16 in. (1.8 to 4.8 mm) aluminum. For thicker metals, take advantage of the Stick mode using 3/32 and 1/8 in. (2.4 and 3.2 mm) electrodes.
1549.99
Price: 1549.99
|
|
|
| Systimatic 37210 Glue Joint Rip Blade- 12Inch, 36 Teeth | Systimatic 37426 12Inch 100T TFE Bandit Teflon Coated Saw Blade |
 For smooth, straight, ready-to-glue cuts in all types of solid wood Produces a smooth, true surface for gluing or finish work Especially recommended for hardwoods In general, choose a higher tooth count for power feed applications and a lower count for hand-fed machines 22 degree hook tooth angle. Triple chip grind. 12 diameter, 36 teeth. 1 arbor. .161 kerf. .109 plate. For smooth, straight, ready-to-glue cuts in all types of solid wood Produces a smooth, true surface for gluing or finish work Especially recommended for hardwoods In general, choose a higher tooth count for power feed applications and a lower count for hand-fed machines 22 degree hook tooth angle. Triple chip grind. 12 diameter, 36 teeth. 1 arbor. .161 kerf. .109 plate.
49.99
Price: 49.99
|
 The Systimatic 37426 is a 12 100T TFE Bandit Teflon Coated Saw Blade. The Teflon coating on the blade is a tough commercial aerospace grade, with a low drag coefficient used in high friction wear applications. The exclusive tooth geometry gives user very smooth cut performance in all types of wood. A low drag coefficient is used in high friction wear applications.The Systimatic 37426 is a 12 100T TFE Bandit Teflon Coated Saw Blade. The Teflon coating on the blade is a tough commercial aerospace grade, with a low drag coefficient used in high friction wear applications. The exclusive tooth geometry gives user very smooth cut performance in all types of wood. A low drag coefficient is used in high friction wear applications.
129.99
Price: 129.99
|
|
|
| Fein 6-35-021-47-03-7 E Cut Metal Supercut 25 Pack | Fein 6-35-02-119-04-8 1-3/8 Inch Precision E-Cut SuperCut Blades - 5 Pack |
 The Fein 6-35-021-47-03-7 is a Pack of 25 E-Cut Metal Supercut Blades. They are suitable for metal, wood, and synthetics. The E-Cut Blades are designed with a flush-cut so you can place the blades flat on surfaces perpendicular to your cut. You can cut almost as fast as a jigsaw or reciprocating saw without losing precision quality.The Fein 6-35-021-47-03-7 is a Pack of 25 E-Cut Metal Supercut Blades. They are suitable for metal, wood, and synthetics. The E-Cut Blades are designed with a flush-cut so you can place the blades flat on surfaces perpendicular to your cut. You can cut almost as fast as a jigsaw or reciprocating saw without losing precision quality.
429.99
Price: 429.99
|
 The Fein 6-35-02-119-04-8 1-3/8 Inch Precision E-Cut Blades are made for the Fein SuperCut tool. They are suitable for wood, plasterboard, and many plastics and are used when extreme precision is required. The E-Cut Blades are designed with a flush-cut so you can place the blades flat on surfaces perpendicular to your cut. You can cut almost as fast as a jigsaw or reciprocating saw without losing precision quality.The Fein 6-35-02-119-04-8 1-3/8 Inch Precision E-Cut Blades are made for the Fein SuperCut tool. They are suitable for wood, plasterboard, and many plastics and are used when extreme precision is required. The E-Cut Blades are designed with a flush-cut so you can place the blades flat on surfaces perpendicular to your cut. You can cut almost as fast as a jigsaw or reciprocating saw without losing precision quality.
109.99
Price: 109.99
|
|
|
| |
|
|
