|
| |
|
| AO Safety 94028 Dual-Leg 6-Foot Shock Lanyard | AO Safety 94053 2x8 Permanent Roof Anchor |
 The AO Safety 94028 is a Dual-Leg 6-Foot Shock Lanyard. The dual-leg design allows workers to tie off to 2nd anchor points before releasing the 1st, improving safety. The safe-absorb lanyard length design stretches from 4-6 as needed to reduce overall length and a possible work hazard. It meets CSA Z259.11, ANSI Z359.1, OSHA 1910/1926 safety standards.The AO Safety 94028 is a Dual-Leg 6-Foot Shock Lanyard. The dual-leg design allows workers to tie off to 2nd anchor points before releasing the 1st, improving safety. The safe-absorb lanyard length design stretches from 4-6 as needed to reduce overall length and a possible work hazard. It meets CSA Z259.11, ANSI Z359.1, OSHA 1910/1926 safety standards.
62.99
Price: 62.99
|
 The AO Safety 94053 is a 2x8 Permanent Roof Anchor. The 94053 attaches to a 2x4, 2x6 or 2x8 at the framing stage on construction for permanent mounting. It also has a flashing base and cover for waterproof protection from the weather. It meets ANSI Z359.1, OSHA 1910/1926 safety standards.The AO Safety 94053 is a 2x8 Permanent Roof Anchor. The 94053 attaches to a 2x4, 2x6 or 2x8 at the framing stage on construction for permanent mounting. It also has a flashing base and cover for waterproof protection from the weather. It meets ANSI Z359.1, OSHA 1910/1926 safety standards.
44.99
Price: 44.99
|
|
|
| DeWalt DW8061 4Inch x .045Inch x 5/8Inch Metal Thin Cut-Off Wheel | DeWalt DC9099 18-Volt Ni-Cd Low-Profile Battery Without Manufacturer Packaging |
 The DeWalt DW8061 is a 4 x .045 x 5/8 Type 1 Metal Thin Cut-Off Wheel. It has 2 full sheets of fiberglass for durability and safety. The premium resin bonds are 100% inspected before use for product consistency and quality. The DeWalt DW8061 is a 4 x .045 x 5/8 Type 1 Metal Thin Cut-Off Wheel. It has 2 full sheets of fiberglass for durability and safety. The premium resin bonds are 100% inspected before use for product consistency and quality.
1.49
Price: 1.49
|
 The DeWalt DC9099 is a low-profile 18-volt battery that is compatible with all DeWalt 18-volt cordless tools. The DC9099 is 0.5 lbs. lighter than the DW9099 batteries and 3/8" thinner. The DeWalt DC9099 is a low-profile 18-volt battery that is compatible with all DeWalt 18-volt cordless tools. The DC9099 is 0.5 lbs. lighter than the DW9099 batteries and 3/8" thinner.
47.99
Price: 47.99
|
|
|
| DeWalt DW4713 4-1/2 Inch Segmented Rim Industrial Dry/Wet Cut Diamond Blade | DeWalt DW4865B 9Inch 10 TPI Demolition Bi-Metal Reciprocating Saw Blade |
 The DeWalt DW4713 is a 4-1/2 Segmented Rim Industrial Dry/Wet Cut Diamond Blade. It has advanced diamond matrix which provides long life and enhanced material cutting. Segmented rim blades are laser welded with heat treated steel bodies provide increased durability and long life.The DeWalt DW4713 is a 4-1/2 Segmented Rim Industrial Dry/Wet Cut Diamond Blade. It has advanced diamond matrix which provides long life and enhanced material cutting. Segmented rim blades are laser welded with heat treated steel bodies provide increased durability and long life.
16.99
Price: 16.99
|
 The DeWalt DW4865B is a 9 10 TPI Demolition Bi-Metal Reciprocating Saw Blade. The demolition blade is thicker than standard blade thereby preventing breakage. The blade is wider which add more stability to the cut making it easier to cut a straight line. It has reinforced teeth for increased durability when cutting nails and other metals.The DeWalt DW4865B is a 9 10 TPI Demolition Bi-Metal Reciprocating Saw Blade. The demolition blade is thicker than standard blade thereby preventing breakage. The blade is wider which add more stability to the cut making it easier to cut a straight line. It has reinforced teeth for increased durability when cutting nails and other metals.
2.79
Price: 2.79
|
|
|
| Milwaukee 6140-6 4-1/2Inch Grinder/Sander | Kreg Tool KMS712 Top Track |
 The 6140-6 4-1/2 inch 5.5 amp grinder is ideal for getting into tight spaces where other grinders can not. Its low profile and light weight make it perfect for those lighter duty sanding and grinding projects. The tool is double insulated (two prong cord) and incorporates the industry standard 5/8-11 threaded arbor. The comfortable body grip style is easy to hold onto, and in conjunction with the supplied side handle, allows for maximum operator control. The side handle can be attached in three locations. The wheel guard can be moved around the spindle (without the use of tools) for greatest operator protection. This tool can be used as a sander when a 4-1/2 inch backing pad and disc are attached.The 6140-6 4-1/2 inch 5.5 amp grinder is ideal for getting into tight spaces where other grinders can not. Its low profile and light weight make it perfect for those lighter duty sanding and grinding projects. The tool is double insulated (two prong cord) and incorporates the industry standard 5/8-11 threaded arbor. The comfortable body grip style is easy to hold onto, and in conjunction with the supplied side handle, allows for maximum operator control. The side handle can be attached in three locations. The wheel guard can be moved around the spindle (without the use of tools) for greatest operator protection. This tool can be used as a sander when a 4-1/2 inch backing pad and disc are attached.
99.99
Price: 99.99
|
 It mounts to the top-side of a shop-made 3/4 thick fence Extremely versatile and rugged with anodized aluminum extrusion works well with various woodworking machinesTrak features a self-aligning L-shaped mounting foot for easy installation to a shop-made fenceThe top of the track contains a recess for attaching a self-adhesive 1/2 measuring tapeIt mounts to the top-side of a shop-made 3/4 thick fence Extremely versatile and rugged with anodized aluminum extrusion works well with various woodworking machinesTrak features a self-aligning L-shaped mounting foot for easy installation to a shop-made fenceThe top of the track contains a recess for attaching a self-adhesive 1/2 measuring tape
20.49
Price: 20.49
|
|
|
| Alltrade 835708 30� Wrecking Bar | Alltrade 835709 36� Wrecking Bar |
 The Alltrade 835708 is a 30 Wrecking Bar. It is used for medium to heavy stripping and demolition work. It features forged, heat-treated carbon steel bit and handle with corrosion-resistant gray finish.The Alltrade 835708 is a 30 Wrecking Bar. It is used for medium to heavy stripping and demolition work. It features forged, heat-treated carbon steel bit and handle with corrosion-resistant gray finish.
11.99
Price: 11.99
|
The Alltrade 835709 is a 36 Wrecking Bar. It is used for medium to heavy stripping and demolition work. It features forged, heat-treated carbon steel bit and handle with corrosion-resistant gray finish.The Alltrade 835709 is a 36 Wrecking Bar. It is used for medium to heavy stripping and demolition work. It features forged, heat-treated carbon steel bit and handle with corrosion-resistant gray finish.
8.99
Price: 8.99
|
|
|
| Akeda 3522 0.434-Inch Precision Undersized Guide Bushing | DeWalt DWPVTDRV3 3-Piece Mag Impact Ready Pivot Nutsetter Set |
 Akeda 3522 is a 0.434-Inch Undersized Guide Bushing. The high precision thin-wall Akeda guide bushings are accurate to within 0.001. They replace the oversize and undersize router bits. This is a better idea from Akeda, and allows greater adjustment for fit.Akeda 3522 is a 0.434-Inch Undersized Guide Bushing. The high precision thin-wall Akeda guide bushings are accurate to within 0.001. They replace the oversize and undersize router bits. This is a better idea from Akeda, and allows greater adjustment for fit.
11.99
Price: 11.99
|
 Patented geometry reduces rounding of the hexAdvanced hardening process provides maximum durabilityExtra-strength magnets provide strong bit retention Patented geometry reduces rounding of the hexAdvanced hardening process provides maximum durabilityExtra-strength magnets provide strong bit retention
13.99
Price: 13.99
|
|
|
| DeWalt D25103KR Factory Reconditioned D25103K Heavy-Duty 1-Inch 3-Mode Pistol Grip SDS Hammer Kit | Mercer 613080 3Inch x 1/16Inch x 3/8InchC Small Diameter Metal Cut-Off Wheel |
 -2.3 ft-lbs of impact energy provides fast drilling and powerful chipping-7.5 Amp motor provides high performance and overload protection-Reverse feature assists in the removal of fasteners-Variable speed allows for precise hole placement on work surface-Factory set clutch reduces sudden, high torque reactions if bit jams-360 side handle adjusts easily for preference or use in tight spaces -2.3 ft-lbs of impact energy provides fast drilling and powerful chipping-7.5 Amp motor provides high performance and overload protection-Reverse feature assists in the removal of fasteners-Variable speed allows for precise hole placement on work surface-Factory set clutch reduces sudden, high torque reactions if bit jams-360 side handle adjusts easily for preference or use in tight spaces
138.91
Price: 138.91
|
 The Mercer 613080 is a 3 x 1/16 x 3/8C Small Diameter Metal Cut-Off Wheel. The Mercer 613080 is a small diameter, high speed and fully reinforced Cut-Off wheel. The Metal Cut-off wheel is used for cutting all ferrous metals, thin iron pipe, bar stock, metal tubing etc. The cut-off wheel has an aluminum oxide grain and is made up of high strength phenolic resin bond. The Mercer blade also has double external reinforcing with metal centers on 1/16 & 1/8.The Mercer 613080 is a 3 x 1/16 x 3/8C Small Diameter Metal Cut-Off Wheel. The Mercer 613080 is a small diameter, high speed and fully reinforced Cut-Off wheel. The Metal Cut-off wheel is used for cutting all ferrous metals, thin iron pipe, bar stock, metal tubing etc. The cut-off wheel has an aluminum oxide grain and is made up of high strength phenolic resin bond. The Mercer blade also has double external reinforcing with metal centers on 1/16 & 1/8.
1.99
Price: 1.99
|
|
|
| Denver Tools 170050 Professional HVLP Gravity Spray Gun | DeWalt DW7350 Mobile Planer Stand |
 Thee Denver Tools 170050 is a Professional HVLP Gravity Spray Gun. This Spray Gun comes with a 0.6 liter non-drip plastic cup, metal spray gun and throttle strainer. The gun has a stainless steel needle and fluid tip which allow it to be used with water borne materials.Thee Denver Tools 170050 is a Professional HVLP Gravity Spray Gun. This Spray Gun comes with a 0.6 liter non-drip plastic cup, metal spray gun and throttle strainer. The gun has a stainless steel needle and fluid tip which allow it to be used with water borne materials.
16.99
Price: 16.99
|
 The DW7350 mobile planer stand from DeWalt is constructed from heavy gauge steel brackets that support all bench top planers and the materials they are cutting. The top of the base is pre-drilled to accommodate any DeWalt planer while other brands can be used by drilling a few quick holes. The heavy-duty base of the stand utilizes a pedal that engages and disengages the wheels under the stand to allow easy movement of the planer around the shop without lifting or building own transport system. The DW7350 mobile planer stand from DeWalt is constructed from heavy gauge steel brackets that support all bench top planers and the materials they are cutting. The top of the base is pre-drilled to accommodate any DeWalt planer while other brands can be used by drilling a few quick holes. The heavy-duty base of the stand utilizes a pedal that engages and disengages the wheels under the stand to allow easy movement of the planer around the shop without lifting or building own transport system.
169.99
Price: 169.99
|
|
|
| Hobart Welders Weld-It 770203 Tweco MIG Nozzle | Adjustable Clamp 7296 JORGENSEN Steel InchIInch Bar Clamps |
 Hobart Welders Weld-It 770203 is a Tweco MIG Nozzle. It is a replacement MIG nozzle for tweco guns such as Lincoln, Century, Craftsman and other products using Tweco screw-on nozzles.Hobart Welders Weld-It 770203 is a Tweco MIG Nozzle. It is a replacement MIG nozzle for tweco guns such as Lincoln, Century, Craftsman and other products using Tweco screw-on nozzles.
9.99
Price: 9.99
|
 Due to this item being oversized, it is considered a freight shipment and will be subject to an additional 30 shipping fee.The Adjustable Clamp 7296 is a JORGENSEN steel I bar clamps. These heavy-duty clamps have an I Bar design for rigorous daily demands for applications such as school shops, commercial woodworking operations, metalworking, welding and many more applications.Due to this item being oversized, it is considered a freight shipment and will be subject to an additional 30 shipping fee.The Adjustable Clamp 7296 is a JORGENSEN steel I bar clamps. These heavy-duty clamps have an I Bar design for rigorous daily demands for applications such as school shops, commercial woodworking operations, metalworking, welding and many more applications.
55.99
Price: 55.99
|
|
|
| Mechanics M199 1/2� Dr. 250 ft. lbs. Pro Lock Torque Wrench | Channellock 88 6-in-1 Rescue Tool |
 Patented torque adjusting lock/unlock collar High grade spring steel torque mechanism Heavy duty case, and instruction manual included Patented torque adjusting lock/unlock collar High grade spring steel torque mechanism Heavy duty case, and instruction manual included
74.99
Price: 74.99
|
 The Channellock 88 is a 6-in-1 Rescue Tool. Its hardened steel punch shatters safety glass. Its aggressive cross-hatch teeth twist and pull anything that gets in your way. Laser heat-treated cutting edges cut wires and cables easily. Its pry-bar quickly pries open windows and doors. It has a slot for shutting off standard gas safety valves. The spanner wrench tightens and loosens hose couplings.The Channellock 88 is a 6-in-1 Rescue Tool. Its hardened steel punch shatters safety glass. Its aggressive cross-hatch teeth twist and pull anything that gets in your way. Laser heat-treated cutting edges cut wires and cables easily. Its pry-bar quickly pries open windows and doors. It has a slot for shutting off standard gas safety valves. The spanner wrench tightens and loosens hose couplings.
51.99
Price: 51.99
|
|
|
| Makita B-02870 12-1/2 Inch Planer Knives for KP312 | Festool 495462 MFT/3 Multi-Function Table |
 Fits the Makita KP312 12-1/4 Inch PlanerDouble Edged High Speed Steel BladesFits the Makita KP312 12-1/4 Inch PlanerDouble Edged High Speed Steel Blades
34.99
Price: 34.99
|
 ToolKing.com is authorized to sell Festool products only to customers residing the United States and its territoriesToolKing.com promotional discount codes or coupons are NOT valid on Festool productsThe Festool 495462 is a MFT/3 Multi-Function Table. New features include a 35-1/2" work surface height, new V-Groove profile for adapting future accessories, and lighter weight for improved portability. The Festool MFT (multifunction table) system is the most versatile, flexible, and economical workbench solution.ToolKing.com is authorized to sell Festool products only to customers residing the United States and its territoriesToolKing.com promotional discount codes or coupons are NOT valid on Festool productsThe Festool 495462 is a MFT/3 Multi-Function Table. New features include a 35-1/2" work surface height, new V-Groove profile for adapting future accessories, and lighter weight for improved portability. The Festool MFT (multifunction table) system is the most versatile, flexible, and economical workbench solution.
575.00
Price: 575.00
|
|
|
| DeWalt DC930KBR Factory Reconditioned DC930K XRP 1/2-Inch 14.4-Volt Cordless Drill/Driver - Tool Only with Case | Grip 28047 15Inch Ball Bungee Cords (Pack of 12) |
 The DeWalt DC930 is a Factory Reconditioned Heavy-Duty XRP 1/2 14.4V Cordless Drill/Driver. It has DeWalt built high power, high efficiency motor which delivers maximum performance in all drilling and fastening applications. The patented 3-speed all-metal transmission matches the speed to the application for optimal performance. The heavy-duty 1/2 ratcheting chuck locks the sleeve to prevent bits from slipping and falling out. The DeWalt DC930 is a Factory Reconditioned Heavy-Duty XRP 1/2 14.4V Cordless Drill/Driver. It has DeWalt built high power, high efficiency motor which delivers maximum performance in all drilling and fastening applications. The patented 3-speed all-metal transmission matches the speed to the application for optimal performance. The heavy-duty 1/2 ratcheting chuck locks the sleeve to prevent bits from slipping and falling out.
59.53
Price: 59.53
|
 Great for securing hose cables. Ideal for tying down tarps.Elastic bungee cords have polyester covering15 in length, pack of 12Great for securing hose cables. Ideal for tying down tarps.Elastic bungee cords have polyester covering15 in length, pack of 12
7.99
Price: 7.99
|
|
|
| Grip 87120 15 inch Adjustable Wrench | Milwaukee 48-00-4091 Ice Hardened� 6Inch 8/12 TPI SAWZALL� blade |
 Drop forged, heat treated steel Chrome plated polish head resists rust and corrosion Extra thick, double dipped, cushion grip handle for a secure hold during useDrop forged, heat treated steel Chrome plated polish head resists rust and corrosion Extra thick, double dipped, cushion grip handle for a secure hold during use
9.99
Price: 9.99
|
 The Milwaukee 48-00-4091 is an Ice Hardened� 6-Inch 8/12 TPI SAWZALL� blade. Ice Edge� blades are processed with a patent pending cryogenic heat treatment so they can handle the toughest alloy steel materials. Unlike surface coatings that wear away, cryogenics harden to the core by minimizing soft metal (austenite) and creating more hard metal (martensite). The result is a product that is more consistently hard throughout. These blades are made from Matrix II bi-metal material with 8% cobalt. The bi-metal design allows for faster cutting, longer life blades that can bend without shattering.The Milwaukee 48-00-4091 is an Ice Hardened� 6-Inch 8/12 TPI SAWZALL� blade. Ice Edge� blades are processed with a patent pending cryogenic heat treatment so they can handle the toughest alloy steel materials. Unlike surface coatings that wear away, cryogenics harden to the core by minimizing soft metal (austenite) and creating more hard metal (martensite). The result is a product that is more consistently hard throughout. These blades are made from Matrix II bi-metal material with 8% cobalt. The bi-metal design allows for faster cutting, longer life blades that can bend without shattering.
12.99
Price: 12.99
|
|
|
| Milwaukee 48-00-4187 Ice Hardened� 9-Inch 14 TPI SAWZALL� blade | Milwaukee 48-01-9091 Ice Hardened� 6Inch 8/12 TPI SAWZALL� blade |
 The Milwaukee 48-00-4187 is an Ice Hardened� 9-Inch 14 TPI SAWZALL� blade. Ice Edge� blades are processed with a patent pending cryogenic heat treatment so they can handle the toughest alloy steel materials. Unlike surface coatings that wear away, cryogenics harden to the core by minimizing soft metal (austenite) and creating more hard metal (martensite). The result is a product that is more consistently hard throughout. These blades are made from Matrix II bi-metal material with 8% cobalt. The bi-metal design allows for faster cutting, longer life blades that can bend without shattering.The Milwaukee 48-00-4187 is an Ice Hardened� 9-Inch 14 TPI SAWZALL� blade. Ice Edge� blades are processed with a patent pending cryogenic heat treatment so they can handle the toughest alloy steel materials. Unlike surface coatings that wear away, cryogenics harden to the core by minimizing soft metal (austenite) and creating more hard metal (martensite). The result is a product that is more consistently hard throughout. These blades are made from Matrix II bi-metal material with 8% cobalt. The bi-metal design allows for faster cutting, longer life blades that can bend without shattering.
15.99
Price: 15.99
|
 The Milwaukee 48-01-9712 is an Ice Hardened� 6-Inch, 8/12 TPI SAWZALL� blade. Ice Edge� blades are processed with a patent pending cryogenic heat treatment so they can handle the toughest alloy steel materials. Unlike surface coatings that wear away, cryogenics harden to the core by minimizing soft metal (austenite) and creating more hard metal (martensite). The result is a product that is more consistently hard throughout. These blades are made from Matrix II bi-metal material with 8% cobalt. The bi-metal design allows for faster cutting, longer life blades that can bend without shattering.The Milwaukee 48-01-9712 is an Ice Hardened� 6-Inch, 8/12 TPI SAWZALL� blade. Ice Edge� blades are processed with a patent pending cryogenic heat treatment so they can handle the toughest alloy steel materials. Unlike surface coatings that wear away, cryogenics harden to the core by minimizing soft metal (austenite) and creating more hard metal (martensite). The result is a product that is more consistently hard throughout. These blades are made from Matrix II bi-metal material with 8% cobalt. The bi-metal design allows for faster cutting, longer life blades that can bend without shattering.
1.99
Price: 1.99
|
|
|
| Milwaukee 48-01-9093 Ice Hardened� 8-Inch 8/12 TPI SAWZALL� Blade | Milwaukee 48-01-9182 Ice Hardened 6-Inch 14 TPI SAWZALL Blade |
 The Milwaukee 48-01-9093 is an Ice Hardened� 8-Inch, 8/12 TPI SAWZALL� blade. Ice Edge� blades are processed with a patent pending cryogenic heat treatment so they can handle the toughest alloy steel materials. Unlike surface coatings that wear away, cryogenics harden to the core by minimizing soft metal (austenite) and creating more hard metal (martensite). The result is a product that is more consistently hard throughout. These blades are made from Matrix II bi-metal material with 8% cobalt. The bi-metal design allows for faster cutting, longer life blades that can bend without shattering.The Milwaukee 48-01-9093 is an Ice Hardened� 8-Inch, 8/12 TPI SAWZALL� blade. Ice Edge� blades are processed with a patent pending cryogenic heat treatment so they can handle the toughest alloy steel materials. Unlike surface coatings that wear away, cryogenics harden to the core by minimizing soft metal (austenite) and creating more hard metal (martensite). The result is a product that is more consistently hard throughout. These blades are made from Matrix II bi-metal material with 8% cobalt. The bi-metal design allows for faster cutting, longer life blades that can bend without shattering.
2.99
Price: 2.99
|
 The Milwaukee 48-01-9182 is an Ice Hardened� 6-Inch, 14 TPI SAWZALL� blade. Ice Edge� blades are processed with a patent pending cryogenic heat treatment so they can handle the toughest alloy steel materials. Unlike surface coatings that wear away, cryogenics harden to the core by minimizing soft metal (austenite) and creating more hard metal (martensite). The result is a product that is more consistently hard throughout. These blades are made from Matrix II bi-metal material with 8% cobalt. The bi-metal design allows for faster cutting, longer life blades that can bend without shattering.The Milwaukee 48-01-9182 is an Ice Hardened� 6-Inch, 14 TPI SAWZALL� blade. Ice Edge� blades are processed with a patent pending cryogenic heat treatment so they can handle the toughest alloy steel materials. Unlike surface coatings that wear away, cryogenics harden to the core by minimizing soft metal (austenite) and creating more hard metal (martensite). The result is a product that is more consistently hard throughout. These blades are made from Matrix II bi-metal material with 8% cobalt. The bi-metal design allows for faster cutting, longer life blades that can bend without shattering.
2.99
Price: 2.99
|
|
|
| Milwaukee 48-01-9184 Ice Hardened� 6Inch 18 TPI SAWZALL� blade | Milwaukee 48-01-9186 Ice Hardened� 6Inch 24 TPI SAWZALL� blade |
 The Milwaukee 48-01-9184 is an Ice Hardened� 6-Inch, 18 TPI SAWZALL� blade. Ice Edge� blades are processed with a patent pending cryogenic heat treatment so they can handle the toughest alloy steel materials. Unlike surface coatings that wear away, cryogenics harden to the core by minimizing soft metal (austenite) and creating more hard metal (martensite). The result is a product that is more consistently hard throughout. These blades are made from Matrix II bi-metal material with 8% cobalt. The bi-metal design allows for faster cutting, longer life blades that can bend without shattering.The Milwaukee 48-01-9184 is an Ice Hardened� 6-Inch, 18 TPI SAWZALL� blade. Ice Edge� blades are processed with a patent pending cryogenic heat treatment so they can handle the toughest alloy steel materials. Unlike surface coatings that wear away, cryogenics harden to the core by minimizing soft metal (austenite) and creating more hard metal (martensite). The result is a product that is more consistently hard throughout. These blades are made from Matrix II bi-metal material with 8% cobalt. The bi-metal design allows for faster cutting, longer life blades that can bend without shattering.
2.99
Price: 2.99
|
 The Milwaukee 48-01-9712 is an Ice Hardened� 6-Inch, 24 TPI SAWZALL� blade. Ice Edge� blades are processed with a patent pending cryogenic heat treatment so they can handle the toughest alloy steel materials. Unlike surface coatings that wear away, cryogenics harden to the core by minimizing soft metal (austenite) and creating more hard metal (martensite). The result is a product that is more consistently hard throughout. These blades are made from Matrix II bi-metal material with 8% cobalt. The bi-metal design allows for faster cutting, longer life blades that can bend without shattering.The Milwaukee 48-01-9712 is an Ice Hardened� 6-Inch, 24 TPI SAWZALL� blade. Ice Edge� blades are processed with a patent pending cryogenic heat treatment so they can handle the toughest alloy steel materials. Unlike surface coatings that wear away, cryogenics harden to the core by minimizing soft metal (austenite) and creating more hard metal (martensite). The result is a product that is more consistently hard throughout. These blades are made from Matrix II bi-metal material with 8% cobalt. The bi-metal design allows for faster cutting, longer life blades that can bend without shattering.
2.99
Price: 2.99
|
|
|
| Milwaukee 48-01-9188 Ice Hardened� 9-Inch 18 TPI SAWZALL� blade | Milwaukee 48-01-9713 Ice Hardened� 9Inch 10 TPI The Torch� SAWZ |
 The Milwaukee 48-01-9188 is an Ice Hardened� 9-Inch, 18 TPI SAWZALL� blade. Ice Edge� blades are processed with a patent pending cryogenic heat treatment so they can handle the toughest alloy steel materials. Unlike surface coatings that wear away, cryogenics harden to the core by minimizing soft metal (austenite) and creating more hard metal (martensite). The result is a product that is more consistently hard throughout. These blades are made from Matrix II bi-metal material with 8% cobalt. The bi-metal design allows for faster cutting, longer life blades that can bend without shattering.The Milwaukee 48-01-9188 is an Ice Hardened� 9-Inch, 18 TPI SAWZALL� blade. Ice Edge� blades are processed with a patent pending cryogenic heat treatment so they can handle the toughest alloy steel materials. Unlike surface coatings that wear away, cryogenics harden to the core by minimizing soft metal (austenite) and creating more hard metal (martensite). The result is a product that is more consistently hard throughout. These blades are made from Matrix II bi-metal material with 8% cobalt. The bi-metal design allows for faster cutting, longer life blades that can bend without shattering.
2.99
Price: 2.99
|
 The Milwaukee 48-01-9712 is an Ice Hardened� 9-Inch, 10 TPI Torch� SAWZALL� blade. Ice Edge� blades are processed with a patent pending cryogenic heat treatment so they can handle the toughest alloy steel materials. Unlike surface coatings that wear away, cryogenics harden to the core by minimizing soft metal (austenite) and creating more hard metal (martensite). The result is a product that is more consistently hard throughout. These blades are made from Matrix II bi-metal material with 8% cobalt. The bi-metal design allows for faster cutting, longer life blades that can bend without shattering.The Milwaukee 48-01-9712 is an Ice Hardened� 9-Inch, 10 TPI Torch� SAWZALL� blade. Ice Edge� blades are processed with a patent pending cryogenic heat treatment so they can handle the toughest alloy steel materials. Unlike surface coatings that wear away, cryogenics harden to the core by minimizing soft metal (austenite) and creating more hard metal (martensite). The result is a product that is more consistently hard throughout. These blades are made from Matrix II bi-metal material with 8% cobalt. The bi-metal design allows for faster cutting, longer life blades that can bend without shattering.
2.99
Price: 2.99
|
|
|
| Milwaukee 49-56-9010 2-9/16 Inch Big Hawg hole cutter | Milwaukee 48-01-9788 Ice Hardened� 9Inch 18 TPI The Torch� SAWZ |
 The Milwaukee 49-56-9010 is a 2-9/16-Inch Big Hawg� hole cutter. Big Hawg� hole cutters are specifically designed for drilling large holes in rough wood applications with the speed and longevity that HVAC, plumbing, and other professional contractors require. Arbor and pilot bit sold separately.The Milwaukee 49-56-9010 is a 2-9/16-Inch Big Hawg� hole cutter. Big Hawg� hole cutters are specifically designed for drilling large holes in rough wood applications with the speed and longevity that HVAC, plumbing, and other professional contractors require. Arbor and pilot bit sold separately.
27.99
Price: 27.99
|
 The Milwaukee 48-01-9712 is an Ice Hardened� 9-Inch, 18 TPI Torch� SAWZALL� blade. Ice Edge� blades are processed with a patent pending cryogenic heat treatment so they can handle the toughest alloy steel materials. Unlike surface coatings that wear away, cryogenics harden to the core by minimizing soft metal (austenite) and creating more hard metal (martensite). The result is a product that is more consistently hard throughout. These blades are made from Matrix II bi-metal material with 8% cobalt. The bi-metal design allows for faster cutting, longer life blades that can bend without shattering.The Milwaukee 48-01-9712 is an Ice Hardened� 9-Inch, 18 TPI Torch� SAWZALL� blade. Ice Edge� blades are processed with a patent pending cryogenic heat treatment so they can handle the toughest alloy steel materials. Unlike surface coatings that wear away, cryogenics harden to the core by minimizing soft metal (austenite) and creating more hard metal (martensite). The result is a product that is more consistently hard throughout. These blades are made from Matrix II bi-metal material with 8% cobalt. The bi-metal design allows for faster cutting, longer life blades that can bend without shattering.
3.99
Price: 3.99
|
|
|
| Milwaukee 7150-21 18 gauge Brad Nailer Kit | Milwaukee 49-22-1550 Large Drill Chuck Kit |
 -Milwaukees Heavy-Duty 18 gauge Brad Nailer has a powerful oil-free motor eliminating daily oiling and potential work surface contamination. Its ultra lightweight magnesium housing minimizes fatigue, and its ergonomic grip and balance combined with its compact size offers great control and maneuverability. Its reload indicator prevents missing nails in trim work and damage to finer woods. The textured selectable trigger lets you choose sequential or contact actuation by simply turning a knob. The spring loaded magazine allows fast side loading and unloading of fasteners and holds 106 brad nails in 5/8 in. to 2-1/8 in. lengths. The self-cleaning air filter extends life by preventing dirt and debris from entering the tool. The adjustable rear air deflector with muffler directs exhaust away from the work area and holds down the noise. An adjustable and removable belt hook provides convenience for carrying. The tool-free depth of drive adjustment provides precise depth control. A tool-free jam release allows for quick access for clearing occasional jams.-Milwaukees Heavy-Duty 18 gauge Brad Nailer has a powerful oil-free motor eliminating daily oiling and potential work surface contamination. Its ultra lightweight magnesium housing minimizes fatigue, and its ergonomic grip and balance combined with its compact size offers great control and maneuverability. Its reload indicator prevents missing nails in trim work and damage to finer woods. The textured selectable trigger lets you choose sequential or contact actuation by simply turning a knob. The spring loaded magazine allows fast side loading and unloading of fasteners and holds 106 brad nails in 5/8 in. to 2-1/8 in. lengths. The self-cleaning air filter extends life by preventing dirt and debris from entering the tool. The adjustable rear air deflector with muffler directs exhaust away from the work area and holds down the noise. An adjustable and removable belt hook provides convenience for carrying. The tool-free depth of drive adjustment provides precise depth control. A tool-free jam release allows for quick access for clearing occasional jams.
119.99
Price: 119.99
|
 The Milwaukee 49-22-1550 Large Drill Chuck Kit converts the Milwaukee 2404-1 Super Hole Shooter Drill from a no. 3 internal morse taper spindle to a 3/4" jawed chuck. The 49-22-1550 includes a 48-66-2000 Chuck and a 48-07-0100 Arbor.The Milwaukee 49-22-1550 Large Drill Chuck Kit converts the Milwaukee 2404-1 Super Hole Shooter Drill from a no. 3 internal morse taper spindle to a 3/4" jawed chuck. The 49-22-1550 includes a 48-66-2000 Chuck and a 48-07-0100 Arbor.
109.99
Price: 109.99
|
|
|
| Hobart Welders Weld-It 770067 Cross Chisel Head Chipping Hammer | Kreg Tool DB55 Semi-Automatic Foreman Pocket Hole Machine |
 The Hobart Welders Weld-It 770067 Cross chisel head chipping hammer with shock-resistant spring-steel handle with hanging loop.The Hobart Welders Weld-It 770067 Cross chisel head chipping hammer with shock-resistant spring-steel handle with hanging loop.
5.99
Price: 5.99
|
 When your production needs have outpaced the manual Kreg Jigs, look for the added speed and convenience of the FOREMAN Pocket Hole Machine. The semi-automatic FOREMAN features a pneumatic drill motor and automatically adjusting air clamping cylinder. To operate, simply position your material to be drilled and pull the lever forward. This motion supplies air to the clamping cylinder that automatically adjusts to your material thickness as well as activates the 3/4 hp drill motor. Finish the drill stroke by continuing to pull on the lever and then return the lever to the home position to cut the air supply.Now with automatic oiler for pneumatic motorLever operated, 1 second cycle time3/4 hp pneumatic motor, automatic air clamping90-120 psi recommended - Minimum compressor cap. of 5.3 cfm @ 90 psi1/2 to 1-1/2 material capacity19 H x 13-5/8 W x 22-5/8D (35 lbs.)Tabletop height of 6-3/4Fast, semi-automatic operation; automatic hands-free clamping, quiet pneumatic drill motor with lever operated drill stroke.Reliable, one-step drilling operation; drills flat-bottom, round-sided pocket hole that can be plugged.Adjustability to handle 1/2 through 1-1/2 thick material.Stable work surface with easily adjustable swing-stop material positioning guides.Hinged-top that allows easy access to drill bit and motor.When your production needs have outpaced the manual Kreg Jigs, look for the added speed and convenience of the FOREMAN Pocket Hole Machine. The semi-automatic FOREMAN features a pneumatic drill motor and automatically adjusting air clamping cylinder. To operate, simply position your material to be drilled and pull the lever forward. This motion supplies air to the clamping cylinder that automatically adjusts to your material thickness as well as activates the 3/4 hp drill motor. Finish the drill stroke by continuing to pull on the lever and then return the lever to the home position to cut the air supply.Now with automatic oiler for pneumatic motorLever operated, 1 second cycle time3/4 hp pneumatic motor, automatic air clamping90-120 psi recommended - Minimum compressor cap. of 5.3 cfm @ 90 psi1/2 to 1-1/2 material capacity19 H x 13-5/8 W x 22-5/8D (35 lbs.)Tabletop height of 6-3/4Fast, semi-automatic operation; automatic hands-free clamping, quiet pneumatic drill motor with lever operated drill stroke.Reliable, one-step drilling operation; drills flat-bottom, round-sided pocket hole that can be plugged.Adjustability to handle 1/2 through 1-1/2 thick material.Stable work surface with easily adjustable swing-stop material positioning guides.Hinged-top that allows easy access to drill bit and motor.
824.99
Price: 824.99
|
|
|
| DeWalt D51844R Factory Reconditioned D51844 2-Inch - 3-1/2 Inch Full Round Head Framing Nailer, 900 in-lbs, 20� Angle | Black & Decker 70-613 6-Inch Coarse Wire Wheel for Wood and Metal |
 The DeWalt D51844R is a factory reconditioned D51844 lightweight round head framing nailer ideal for framing, sheathing, roof decking and sub flooring. The tool-free adjustable depth allows quick depth setting and minimizes the hassle of going back with a hammer to finish the job. This framing nailer has a dry fire lockout that prevents the nail gun from firing when the magazine is down to 2 nails, thus indicating the need to reload the magazine. The unique internal valve design of the DeWalt D51844 generates enough power to drive 3-1/2 inch nails into standard framing lumber and engineered lumber with minimum recoil. This round head factory reconditioned nailer is equipped with a hassle-free quick-release mechanism which releases jammed nails from the round head within seconds. The D51844 nailer has been constructed using magnesium while the magazine is built of aluminium. The DeWalt D51844 round head framing nailer weighs just 7.6 lbs and can withstand extreme job site conditions.The DeWalt D51844R is a factory reconditioned D51844 lightweight round head framing nailer ideal for framing, sheathing, roof decking and sub flooring. The tool-free adjustable depth allows quick depth setting and minimizes the hassle of going back with a hammer to finish the job. This framing nailer has a dry fire lockout that prevents the nail gun from firing when the magazine is down to 2 nails, thus indicating the need to reload the magazine. The unique internal valve design of the DeWalt D51844 generates enough power to drive 3-1/2 inch nails into standard framing lumber and engineered lumber with minimum recoil. This round head factory reconditioned nailer is equipped with a hassle-free quick-release mechanism which releases jammed nails from the round head within seconds. The D51844 nailer has been constructed using magnesium while the magazine is built of aluminium. The DeWalt D51844 round head framing nailer weighs just 7.6 lbs and can withstand extreme job site conditions.
149.30
Price: 149.30
|
 The Black & Decker 70-613 is a Coarse Crimped Wire Wheel for bench grinders. The 70-613 has a 6" diameter. The coarse wires are specialized for use on wood and metal.The Black & Decker 70-613 is a Coarse Crimped Wire Wheel for bench grinders. The 70-613 has a 6" diameter. The coarse wires are specialized for use on wood and metal.
5.99
Price: 5.99
|
|
|
| Hobart Welders 043856 SGA-100 Spool Gun Control for the Handler 140 and 187 | CST/Berger 57-AL500HVI Electronic Self Leveling Horizontal and Vertical Interior Rotary Laser Level |
 The Hobart Welders 043856 SGA-100 Spool Gun Control is required to connect a spool gun to the Hobart Handler 140 or 187. The 043856 SGA-100 Spool Gun Control allows you to connect a spool gun to virtually any similar MIG Welder - Hobart or other brands.The Hobart Welders 043856 SGA-100 Spool Gun Control is required to connect a spool gun to the Hobart Handler 140 or 187. The 043856 SGA-100 Spool Gun Control allows you to connect a spool gun to virtually any similar MIG Welder - Hobart or other brands.
239.99
Price: 239.99
|
 The CST/Berger 57-AL500HVI is a Horizontal/Vertical Electronic Self-Level Rotary Laser Interior. The AL-500H is fully electronic self-leveling (5) and provides accuracy of up to 1/8-in at 100-ft (3.2mm at 30m) with a working range of 1,000-ft (305m) when used with the LD-90 Rotary Laser Detector. Simple one button operation makes this 600RPM rotary laser easy to set-up and use. The durable design of the AL-500H features a heavy-duty protective cage for the laser beacon and co-molded water resistant rubber housing (IP54). The AL-500H is powered by 6 AA Alkaline batteries.The CST/Berger 57-AL500HVI is a Horizontal/Vertical Electronic Self-Level Rotary Laser Interior. The AL-500H is fully electronic self-leveling (5) and provides accuracy of up to 1/8-in at 100-ft (3.2mm at 30m) with a working range of 1,000-ft (305m) when used with the LD-90 Rotary Laser Detector. Simple one button operation makes this 600RPM rotary laser easy to set-up and use. The durable design of the AL-500H features a heavy-duty protective cage for the laser beacon and co-molded water resistant rubber housing (IP54). The AL-500H is powered by 6 AA Alkaline batteries.
579.99
Price: 579.99
|
|
|
| Channellock� 338 8Inch Cutting Plier Lap Joint | Chicago Pneumatic 0367010060 Replacement V-Belt for the QRS10 Air Compressors |
 8 length, 25/32 cutting length, 25/32 jaw length Precision made of fine polished, high carbon drop forged steel Perfectly mated cutter, heat treated to hold its edge High leverage, heavy duty construction Distinctive Channellock� blue comfort grips 100% guaranteed against breakage and failure8 length, 25/32 cutting length, 25/32 jaw length Precision made of fine polished, high carbon drop forged steel Perfectly mated cutter, heat treated to hold its edge High leverage, heavy duty construction Distinctive Channellock� blue comfort grips 100% guaranteed against breakage and failure
17.99
Price: 17.99
|
 The Chicago Pneumatic 0367010060 is a replacement belt for the QRS10 Air Compressors. The 0367010060 helps maintain superior function of your QRS Air Compressors.The Chicago Pneumatic 0367010060 is a replacement belt for the QRS10 Air Compressors. The 0367010060 helps maintain superior function of your QRS Air Compressors.
34.99
Price: 34.99
|
|
|
| Hyde 06570 4Inch Flexible MaxxGrip Hammer Head Joint Knife | AO Safety 91295 XLR8 White Hard Hat With Pinlock |
 -High carbon steel blades-Full tang blade construction-Blades run straight from the working edge through handle to nail setting end-Blades individually ground, polished, mirror finished and clear coated-The ergo-engineered soft-grip handles fit user fit for less user fatigue-cushion to absorb shock and perform comfortably during extended use-High carbon steel blades-Full tang blade construction-Blades run straight from the working edge through handle to nail setting end-Blades individually ground, polished, mirror finished and clear coated-The ergo-engineered soft-grip handles fit user fit for less user fatigue-cushion to absorb shock and perform comfortably during extended use
6.85
Price: 6.85
|
 AO Safety 91295 XLR8 is a White Hard Hat with Pinlock. AO Safety hard hats offer excellent protection from falling objects and overhead hazards. Our new style is stronger than ever and looks great too with its new contemporary shell design.AO Safety 91295 XLR8 is a White Hard Hat with Pinlock. AO Safety hard hats offer excellent protection from falling objects and overhead hazards. Our new style is stronger than ever and looks great too with its new contemporary shell design.
6.99
Price: 6.99
|
|
|
| AO Safety 91296 XLR8 Yellow Hard Hat with Pinlock | Denver Tools 417002 3/8-Inch Electric Angle Drill |
 AO Safety 91296 XLR8 is a Yellow Hard Hat with Pinlock. AO Safety hard hats offer excellent protection from falling objects and overhead hazards. Our new style is stronger than ever and looks great too with its new contemporary shell design.AO Safety 91296 XLR8 is a Yellow Hard Hat with Pinlock. AO Safety hard hats offer excellent protection from falling objects and overhead hazards. Our new style is stronger than ever and looks great too with its new contemporary shell design.
6.99
Price: 6.99
|
 The Denver Tools 417002 is a 3/8-Inch Electric Angle Drill. This reversible drill features an easy to operate pull on/off paddle switch and a locking mechanism for continuous rotation. The ergonomic design and 55 degree angled chuck this drill easy to use in confined working areas.The Denver Tools 417002 is a 3/8-Inch Electric Angle Drill. This reversible drill features an easy to operate pull on/off paddle switch and a locking mechanism for continuous rotation. The ergonomic design and 55 degree angled chuck this drill easy to use in confined working areas.
22.99
Price: 22.99
|
|
|
| Denver Tools 464002 12V Cordless Grease Gun with Two Batteries | Denver Tools 613002 2 Ton Engine Crane |
 The Denver Tools 464002 is a 12-Volt Cordless Grease Gun. This grease gun can either be used with grease cartridges or it can be filled from a bulk container. Its lightweight assembly and cordless technology makes this grease gun extremely use to use and maneuver.The Denver Tools 464002 is a 12-Volt Cordless Grease Gun. This grease gun can either be used with grease cartridges or it can be filled from a bulk container. Its lightweight assembly and cordless technology makes this grease gun extremely use to use and maneuver.
69.99
Price: 69.99
|
 The Denver Tools 613002 is a 2 Ton Engine Crane. This engine crane has four settings for half ton, full ton, one and a half ton and two ton loads and features a hydraulic action pump for easy lifting. The legs and easily fold up into the body for easy storage and four caster wheels are attached to the bottom of the main body so it can easily be rolled away.The Denver Tools 613002 is a 2 Ton Engine Crane. This engine crane has four settings for half ton, full ton, one and a half ton and two ton loads and features a hydraulic action pump for easy lifting. The legs and easily fold up into the body for easy storage and four caster wheels are attached to the bottom of the main body so it can easily be rolled away.
219.99
Price: 219.99
|
|
|
| Flex LRP1503VRA Boa All-Around Polishing Pipe Sander Kit | Grip 46110 12Inch Professional Scraper with Three Blades |
 The Flex LRP1503VRA Boa is the perfect solution for sanding and polishing pipe constructions. The sanding arm of the LRP1503VRA wraps itself around the pipe like a snake when pressure is applied, tackling radii up to 270 degrees. Spring resistance between the deflection rollers means that the sanding arm and sanding belt are always uniformly pretensioned. The Boa needs only be be rotated slightly to continue treatment and achieve the perfect finish. In tight places - e.g. handrails that are fixed close to walls - the additional handle can be rotated 180 degrees.The Flex LRP1503VRA Boa is the perfect solution for sanding and polishing pipe constructions. The sanding arm of the LRP1503VRA wraps itself around the pipe like a snake when pressure is applied, tackling radii up to 270 degrees. Spring resistance between the deflection rollers means that the sanding arm and sanding belt are always uniformly pretensioned. The Boa needs only be be rotated slightly to continue treatment and achieve the perfect finish. In tight places - e.g. handrails that are fixed close to walls - the additional handle can be rotated 180 degrees.
749.99
Price: 749.99
|
 Designed to reach into tight spaces Ideal for removing stickers from windshields and bumpers Spring release allows easy interchange of blades Hollow handle stores blades when hot in use Includes Scraper, 3 stainless steel blades, and one plastic blade for use on safety plastic laminated glass Designed to reach into tight spaces Ideal for removing stickers from windshields and bumpers Spring release allows easy interchange of blades Hollow handle stores blades when hot in use Includes Scraper, 3 stainless steel blades, and one plastic blade for use on safety plastic laminated glass
3.99
Price: 3.99
|
|
|
| Grip 65230 7-Piece 5/16-Inch Magnetic Thumb Driver Set | Milwaukee 9677-20 3 Ton, 8' Chain Hoist |
 The Grip 65230 is a 7-Pc 5/16 Magnetic Thumb Driver Set. Thumb drivers provide access to confined working areas and applications where ordinary screwdrivers cannot fit. These sandblasted, chrome vanadium steel bits come with a PVC organizer.The Grip 65230 is a 7-Pc 5/16 Magnetic Thumb Driver Set. Thumb drivers provide access to confined working areas and applications where ordinary screwdrivers cannot fit. These sandblasted, chrome vanadium steel bits come with a PVC organizer.
2.99
Price: 2.99
|
 3 ton rated capacity, 8 ft. standard liftChain pull to lift rated load 65 lbs. Feet of chain overhauled to lift load one foot 154 ft.Equipped with hardened load chain for flexibility and long wearWheel cover with guide slots minimizes jamming and slippingThese Hand Chain Hoists from Milwaukee are equipped with hardened load chain for flexibility and long wear3 ton rated capacity, 8 ft. standard liftChain pull to lift rated load 65 lbs. Feet of chain overhauled to lift load one foot 154 ft.Equipped with hardened load chain for flexibility and long wearWheel cover with guide slots minimizes jamming and slippingThese Hand Chain Hoists from Milwaukee are equipped with hardened load chain for flexibility and long wear
479.99
Price: 479.99
|
|
|
| Milwaukee 7100-20 3-1/2 in. Round Head Framing Nailer | Milwaukee 6154-20 4-1/2Inch Super Magnum Grinder/Sander w/Electronic Feedback |
 Milwaukees Heavy-Duty Round Head Framing Nailer with its ergonomic magnesium housing is the lightest Full Round Head Framer in its class. Load 22 full round head plastic collated nails 2 in. to 3-1/2 in. length and diameters .113 in. to .148 in. Its easy select trigger lets you move quickly from single nail placement to contact actuation for maximum control and application versatility. The easy to read and tool free depth of drive lets you quickly adjust the depth setting without having to reset the air line pressure. The self-cleaning air filter extends life by preventing dirt and debris from entering the tool. The adjustable air deflector with muffler directs exhaust away from the work area and holds down the noise. A reload indicator lets you reload before firing blanks. The rear-loading magazine with bypass pusher allows smooth and fast reloads. The adjustable rafter hook is removable.Milwaukees Heavy-Duty Round Head Framing Nailer with its ergonomic magnesium housing is the lightest Full Round Head Framer in its class. Load 22 full round head plastic collated nails 2 in. to 3-1/2 in. length and diameters .113 in. to .148 in. Its easy select trigger lets you move quickly from single nail placement to contact actuation for maximum control and application versatility. The easy to read and tool free depth of drive lets you quickly adjust the depth setting without having to reset the air line pressure. The self-cleaning air filter extends life by preventing dirt and debris from entering the tool. The adjustable air deflector with muffler directs exhaust away from the work area and holds down the noise. A reload indicator lets you reload before firing blanks. The rear-loading magazine with bypass pusher allows smooth and fast reloads. The adjustable rafter hook is removable.
279.99
Price: 279.99
|
 Offers extra heavy duty grinding capability in a compact body grip ergonomic design12 amp, 2.1 HP AC motor. Dial speed control 4,000 - 11,000 RPM.Electronic feedback maintains speed and torque under load conditions. Soft start.Power to weight ratio makes it perfect for those extra heavy duty confined area grinding projectsSpiral cut bevel gears for optimum transmission of torque to the work piece. All ball and roller bearing construction.Integrated lock-off button is featured in the paddle switch. Lock-on button is also available for continuous use operations.Comfortable body grip style is easy to hold onto, side handle can be attached in three positions and allows for maximum operator controlWheel guard can be moved around the spindle (without the use of tools) for greatest operator protectionDouble insulated. 10 ft., 2-wire Quik-Lok cord set.Sold as a grinder with guard, this tool can be used as a sander when a 4-1/2 backing pad and disc are attachedIncludes Tool, guard, grinding wheel, spanner wrench and side handleOffers extra heavy duty grinding capability in a compact body grip ergonomic design12 amp, 2.1 HP AC motor. Dial speed control 4,000 - 11,000 RPM.Electronic feedback maintains speed and torque under load conditions. Soft start.Power to weight ratio makes it perfect for those extra heavy duty confined area grinding projectsSpiral cut bevel gears for optimum transmission of torque to the work piece. All ball and roller bearing construction.Integrated lock-off button is featured in the paddle switch. Lock-on button is also available for continuous use operations.Comfortable body grip style is easy to hold onto, side handle can be attached in three positions and allows for maximum operator controlWheel guard can be moved around the spindle (without the use of tools) for greatest operator protectionDouble insulated. 10 ft., 2-wire Quik-Lok cord set.Sold as a grinder with guard, this tool can be used as a sander when a 4-1/2 backing pad and disc are attachedIncludes Tool, guard, grinding wheel, spanner wrench and side handle
149.99
Price: 149.99
|
|
|
| Milwaukee 48-11-0200 12V Ni-Cd Battery | Gorilla 6200002 Wood Glue 8 oz Bottle |
 The Milwaukee 48-11-0200 is a 12V Ni-Cad Battery. The 12V Ni-Cad battery powers Milwaukees Cordless 12V Super Tough Drills, Driver Drills and Impact Wrenches. It is packed with more power in a compact design. The battery works with the Super Charger II 48-59-0192 120V One Hour and 12V Auto Charger 48-59-0172. The battery does not have a memory effect, it uses all the power capacity available.The Milwaukee 48-11-0200 is a 12V Ni-Cad Battery. The 12V Ni-Cad battery powers Milwaukees Cordless 12V Super Tough Drills, Driver Drills and Impact Wrenches. It is packed with more power in a compact design. The battery works with the Super Charger II 48-59-0192 120V One Hour and 12V Auto Charger 48-59-0172. The battery does not have a memory effect, it uses all the power capacity available.
64.99
Price: 64.99
|
 Gorilla Wood Glue, bonds stronger, faster for wood-to-wood applications. Its hard working and long lasting. The special formula was created for a variety of wood surfaces, is water-resistant, and has no dyes for a better looking bond line.Gorilla Wood Glue, bonds stronger, faster for wood-to-wood applications. Its hard working and long lasting. The special formula was created for a variety of wood surfaces, is water-resistant, and has no dyes for a better looking bond line.
3.99
Price: 3.99
|
|
|
| Gorilla Glue 7800102 Super Glue Two 3 Gram Tubes | Gorilla Glue 5201108 Fast Cure 0.75oz Precision Glue Pen |
 The Gorilla Glue 7800102 is a pack of Two 3 Gram Super Glue Tubes. The Gorilla Super Glue has an Impact-Tough� Formula that makes this a super glue that keeps holding strong, even when the bond takes a hit. Just hold in place for 30-60 seconds while the formula sets, no clamping necessary.The Gorilla Glue 7800102 is a pack of Two 3 Gram Super Glue Tubes. The Gorilla Super Glue has an Impact-Tough� Formula that makes this a super glue that keeps holding strong, even when the bond takes a hit. Just hold in place for 30-60 seconds while the formula sets, no clamping necessary.
3.99
Price: 3.99
|
 The Gorilla Glue 5201108 is a Fast Cure 0.75oz Precision Glue Pen. The unique pen tip applicator makes hard to reach and tight spots easily accessible. Use it for quick fixes, repairs, and craft projects. Fast Curing, white-drying formula in a 0.75 fl. oz. bottle slips in tool belts, toolboxes, purse, camping gear, pockets or drawers. The pen tip ensures even, accurate, no-mess adhesion. Precision Pen-dispensed Gorilla Glue is works well on indoor and outdoor applications on material, and more.The Gorilla Glue 5201108 is a Fast Cure 0.75oz Precision Glue Pen. The unique pen tip applicator makes hard to reach and tight spots easily accessible. Use it for quick fixes, repairs, and craft projects. Fast Curing, white-drying formula in a 0.75 fl. oz. bottle slips in tool belts, toolboxes, purse, camping gear, pockets or drawers. The pen tip ensures even, accurate, no-mess adhesion. Precision Pen-dispensed Gorilla Glue is works well on indoor and outdoor applications on material, and more.
4.99
Price: 4.99
|
|
|
| Gorilla Glue 7805002 Super Glue 15 Gram Bottle Carded | Gorilla Tape 1.88in X 35yards |
 The Gorilla Glue 7805002 is a 15 Gram Bottle of Gorilla Glue Super Glue. This new adhesive features an Impact-Tough impact resistant formula. Gorilla Super Glue sets in 30-60 seconds, with no clamping required. Projects dry fast and last long, standing up to drops, bumps and bangs.The Gorilla Glue 7805002 is a 15 Gram Bottle of Gorilla Glue Super Glue. This new adhesive features an Impact-Tough impact resistant formula. Gorilla Super Glue sets in 30-60 seconds, with no clamping required. Projects dry fast and last long, standing up to drops, bumps and bangs.
4.99
Price: 4.99
|
 Gorilla tough - now on a roll Bonds to things ordinary tape can't, including brick, stucco, wood, and more! Made with double thick adhesive, strong reinforced backing, and a tough all-weather shell. 1.88 inches wide, 35 yards long Gorilla tough - now on a roll Bonds to things ordinary tape can't, including brick, stucco, wood, and more! Made with double thick adhesive, strong reinforced backing, and a tough all-weather shell. 1.88 inches wide, 35 yards long
9.99
Price: 9.99
|
|
|
| CST/Berger 57-AL500H Electronic Self-Leveling Rotary Laser | CST/Berger 57-AL500HVDI Electronic Self Leveling Horizontal and Vertical Rotary Laser Level with Detector |
 The CST/Berger 57-AL500H is an Electronic Self-Leveling Rotary Laser. The AL-500H is fully electronic self-leveling (5) and provides accuracy of up to 1/8-Inch at 100-ft (3.2mm at 30m) with a working range of 1,000-ft (305m) when used with the LD-90 Rotary Laser Detector. Simple one button operation makes this 600RPM rotary laser easy to set-up and use. The durable design of the AL-500H features a heavy-duty protective cage for the laser beacon and co-molded water resistant rubber housing (IP54). The AL-500H is powered by 6 AA Alkaline batteries.The CST/Berger 57-AL500H is an Electronic Self-Leveling Rotary Laser. The AL-500H is fully electronic self-leveling (5) and provides accuracy of up to 1/8-Inch at 100-ft (3.2mm at 30m) with a working range of 1,000-ft (305m) when used with the LD-90 Rotary Laser Detector. Simple one button operation makes this 600RPM rotary laser easy to set-up and use. The durable design of the AL-500H features a heavy-duty protective cage for the laser beacon and co-molded water resistant rubber housing (IP54). The AL-500H is powered by 6 AA Alkaline batteries.
579.99
Price: 579.99
|
 The CST/Berger 57-AL500HVDI is an Electronic Self Leveling Horizontal and Vertical Rotary Laser Level with Detector. The AL-500H is fully electronic self-leveling (5) and provides accuracy of up to 1/8-Inch at 100-Feet (3.2mm at 30m) with a working range of 1,000-Feet (305m) when used with the LD-90 Rotary Laser Detector. Simple one button operation makes this 600RPM rotary laser easy to set-up and use. The durable design of the AL-500H features a heavy-duty protective cage for the laser beacon and co-molded water resistant rubber housing (IP54). The AL-500H is powered by 6 AA Alkaline batteries.The CST/Berger 57-AL500HVDI is an Electronic Self Leveling Horizontal and Vertical Rotary Laser Level with Detector. The AL-500H is fully electronic self-leveling (5) and provides accuracy of up to 1/8-Inch at 100-Feet (3.2mm at 30m) with a working range of 1,000-Feet (305m) when used with the LD-90 Rotary Laser Detector. Simple one button operation makes this 600RPM rotary laser easy to set-up and use. The durable design of the AL-500H features a heavy-duty protective cage for the laser beacon and co-molded water resistant rubber housing (IP54). The AL-500H is powered by 6 AA Alkaline batteries.
699.99
Price: 699.99
|
|
|
| CST/Berger 57-AL500HVPKG Horizontal/Vertical Electronic Self-Leveling Rotary Laser with Detector, Tripod, Pole | CST/Berger 57-LMHCUPK Laser Kit |
The CST/Berger 57-AL500HVPKG is a Horizontal/Vertical Electronic Self-Leveling Rotary Laser with Detector, Tripod, Pole. The AL-500H is fully electronic self-leveling (5) and provides accuracy of up to 1/8-Inch at 100-Feet (3.2mm at 30m) with a working range of 1,000-Feet (305m) when used with the LD-90 Rotary Laser Detector. Simple one button operation makes this 600RPM rotary laser easy to set-up and use. The durable design of the AL-500H features a heavy-duty protective cage for the laser beacon and co-molded water resistant rubber housing (IP54). The AL-500H is powered by 6 AA Alkaline batteries.The CST/Berger 57-AL500HVPKG is a Horizontal/Vertical Electronic Self-Leveling Rotary Laser with Detector, Tripod, Pole. The AL-500H is fully electronic self-leveling (5) and provides accuracy of up to 1/8-Inch at 100-Feet (3.2mm at 30m) with a working range of 1,000-Feet (305m) when used with the LD-90 Rotary Laser Detector. Simple one button operation makes this 600RPM rotary laser easy to set-up and use. The durable design of the AL-500H features a heavy-duty protective cage for the laser beacon and co-molded water resistant rubber housing (IP54). The AL-500H is powered by 6 AA Alkaline batteries.
789.99
Price: 789.99
|
 -The LMH Series levels itself via electronic sensors interfaced with motors, eliminating the need for re-leveling or rechecks. No more fussing with manual leveling screws or bubbles; just turn it on and you are ready for work! Plus, the built-in Anti-Drift System (ADS) sensor provides peace of mind when working on a busy job site; if the lasers height of instrument (H.I.) is altered due to tripod movement or an accidental bump, the operator is instantly alerted. -The LMH Series levels itself via electronic sensors interfaced with motors, eliminating the need for re-leveling or rechecks. No more fussing with manual leveling screws or bubbles; just turn it on and you are ready for work! Plus, the built-in Anti-Drift System (ADS) sensor provides peace of mind when working on a busy job site; if the lasers height of instrument (H.I.) is altered due to tripod movement or an accidental bump, the operator is instantly alerted.
799.99
Price: 799.99
|
|
|
| CST/Berger 57-ALH Electronic Self Leveling Horizontal Rotary Laser Level | CST/Berger 57-ALHV Electronic Self Leveling Horizontal and Vertical Interior Rotary Laser Level |
 The CST/Berger 57-ALH electronic self leveling horizontal rotary laser level delivers accurate, reliable, performance for the professional who demands fast and accurate leveling. The CST/Berger 57-ALH single-slope capable with electronic cross-axis leveling makes the ALH ideal for exterior applications such as grading and excavating, concrete forms, machine control, site prep, marking elevation, landscaping, driveway paving.The CST/Berger 57-ALH electronic self leveling horizontal rotary laser level delivers accurate, reliable, performance for the professional who demands fast and accurate leveling. The CST/Berger 57-ALH single-slope capable with electronic cross-axis leveling makes the ALH ideal for exterior applications such as grading and excavating, concrete forms, machine control, site prep, marking elevation, landscaping, driveway paving.
799.99
Price: 799.99
|
 The CST/Berger 57-ALHV electronic self leveling horizontal and vertical interior rotary laser level delivers, accurate, reliable, performance for the professional who demands fast and accurate leveling. The CST/Berger 57-ALHV is dual-slope capable in both horizontal and vertical position with cross-axis leveling make the ALHV suitable for indoor and outdoor jobs.The CST/Berger 57-ALHV electronic self leveling horizontal and vertical interior rotary laser level delivers, accurate, reliable, performance for the professional who demands fast and accurate leveling. The CST/Berger 57-ALHV is dual-slope capable in both horizontal and vertical position with cross-axis leveling make the ALHV suitable for indoor and outdoor jobs.
849.99
Price: 849.99
|
|
|
| Max JP524H Battery Charger for RB650A | Max SN890CH/34 2Inch - 3-1/2Inch Clipped Head Framing Nailer, 70 - 100 PSI, 90 Nails |
 -Max JP524H is a Battery Charger for use with RB650A Re-Bar Tying tool.-Max JP524H is a Battery Charger for use with RB650A Re-Bar Tying tool.
159.99
Price: 159.99
|
 -Anti-double fire mechanism (US patent 5597106, UK Patent 2286790)-Dial adjustable depth control-Easy jam clearance door (Patent pending)-Tangle free swivel joint (Added from 2002 production)-Lock-out Mechanism - Tool will not fire unless more than three nails are in the magazine-Adjustable exhaust deflector-Maintenance free end cap filter (US Patent 5637125, UK Patent 2294412)-Anti-double fire mechanism (US patent 5597106, UK Patent 2286790)-Dial adjustable depth control-Easy jam clearance door (Patent pending)-Tangle free swivel joint (Added from 2002 production)-Lock-out Mechanism - Tool will not fire unless more than three nails are in the magazine-Adjustable exhaust deflector-Maintenance free end cap filter (US Patent 5637125, UK Patent 2294412)
329.99
Price: 329.99
|
|
|
| Flex LW1509 4-1/2Inch High Speed Wet Angle Grinder, 10000 RPM, 7.8 Amps | Flex LW603VR 5Inch Electronic Variable Speed Wet Polisher, 1000-2800 RPM, 13.0 Amps |
 The Flex LW1509 is a 4-1/2 High Speed Wet Angle Grinder. The compact 4-1/2 grinder is designed for maximum material removal of concrete or natural stone. With its 10000 RPM and 7.8 Amp motor, it is the fastest wet grinder in the market. It is intended for all heavy-duty stone grinding applications like bulk material removal, edge breaking, coarse grinding of uneven surfaces and polish preparation work. The Flex LW1509 is a 4-1/2 High Speed Wet Angle Grinder. The compact 4-1/2 grinder is designed for maximum material removal of concrete or natural stone. With its 10000 RPM and 7.8 Amp motor, it is the fastest wet grinder in the market. It is intended for all heavy-duty stone grinding applications like bulk material removal, edge breaking, coarse grinding of uneven surfaces and polish preparation work.
359.99
Price: 359.99
|
 The Flex LW603VR is a 5 Electronic Variable Speed Wet Polisher. The Flex LW603VR is the most cost-effective and sophisticated wet polisher. Infinitely adjustable polishing speeds (1000-2800 RPM) make this polisher ideal for very sensitive materials and offers users maximum flexibility. The LW603VR is a two-handed tool and is commonly used as a large surface polisher.The Flex LW603VR is a 5 Electronic Variable Speed Wet Polisher. The Flex LW603VR is the most cost-effective and sophisticated wet polisher. Infinitely adjustable polishing speeds (1000-2800 RPM) make this polisher ideal for very sensitive materials and offers users maximum flexibility. The LW603VR is a two-handed tool and is commonly used as a large surface polisher.
429.99
Price: 429.99
|
|
|
| Flex BH812VV 2-Speed Electronic Dry Handled Core Drill, 0-3800 RPM, 14 Amps | Flex L1509FR 5-Inch Angle Grinder, 10000 RPM, 11.0 Amps |
 The Flex BH 812 VV is a 2-Speed Electronic Dry Handled Core Drill. The drill has 14 Amp motor and infinitely adjustable speeds (0-3800 RPM). It is suited for vibration free drilling up to 6” holes into masonry, brick, clay, cinder block, soft limestone and asphalt. It is not for use on concrete. The Flex five-fold VV electronic control gives consistent speed control, soft start with acceleration trigger, overload protection, temperature monitoring and speed pre-selection. The drill has no hammering noise, no vibrations. These drills can be used in inhabited buildings without a second thought. The Flex BH 812 VV is a 2-Speed Electronic Dry Handled Core Drill. The drill has 14 Amp motor and infinitely adjustable speeds (0-3800 RPM). It is suited for vibration free drilling up to 6” holes into masonry, brick, clay, cinder block, soft limestone and asphalt. It is not for use on concrete. The Flex five-fold VV electronic control gives consistent speed control, soft start with acceleration trigger, overload protection, temperature monitoring and speed pre-selection. The drill has no hammering noise, no vibrations. These drills can be used in inhabited buildings without a second thought.
699.99
Price: 699.99
|
 The Flex L1509FR powerful 11 Amp electronic angle grinder is a true powerhouse. It is designed for absolute rugged treatment and is intended for the most demanding applications. It has Flexgrip the multi-handle with built-in holding wrench for exchanging the discs without additional tools. Slender rear special grip is ideal for surface finishing because of extremely flat attack angle and balanced weight distribution. With dust-protected on/off switch located underneath, safety catch and lock. Patented safety disc guard can be adjusted without tools in 24 steps by 360. Turnable in one direction only.The Flex L1509FR powerful 11 Amp electronic angle grinder is a true powerhouse. It is designed for absolute rugged treatment and is intended for the most demanding applications. It has Flexgrip the multi-handle with built-in holding wrench for exchanging the discs without additional tools. Slender rear special grip is ideal for surface finishing because of extremely flat attack angle and balanced weight distribution. With dust-protected on/off switch located underneath, safety catch and lock. Patented safety disc guard can be adjusted without tools in 24 steps by 360. Turnable in one direction only.
189.99
Price: 189.99
|
|
|
| Flex LP1503VR Electronic Metal-Surface Finishing Machine, 9 Amps | Bosch HCBG03 3/16 inch x 2 inch x 3 inch Blue Granite Hammer Drill Masonry Bit |
 The Flex LP1503VR is a burnishing machine for highly polished surfaces. The LP1503VR specializes in shadow-free, transitionless finishes on metal (stainless steel or aluminum), wood and, plastic surfaces. The electronic control and speed preselection over a broad RPM range lends the LP1503VR unique versatility. It is ideal for finishing, polishing, smoothing, dulling, graining, brushing and deburring, thanks to an extensive range of accessories (sold separately).The Flex LP1503VR is a burnishing machine for highly polished surfaces. The LP1503VR specializes in shadow-free, transitionless finishes on metal (stainless steel or aluminum), wood and, plastic surfaces. The electronic control and speed preselection over a broad RPM range lends the LP1503VR unique versatility. It is ideal for finishing, polishing, smoothing, dulling, graining, brushing and deburring, thanks to an extensive range of accessories (sold separately).
519.99
Price: 519.99
|
 The Bosch HCBG03 is a 3/16 inch x 2 inch x 3 inch Blue Granite Hammer Drill Masonry Bit. The masonry bit is ideal for concrete, brick & masonry. It has perfect "On-Center" diamond tip grinding. It features U-flute design which removes debris and increases speed.The Bosch HCBG03 is a 3/16 inch x 2 inch x 3 inch Blue Granite Hammer Drill Masonry Bit. The masonry bit is ideal for concrete, brick & masonry. It has perfect "On-Center" diamond tip grinding. It features U-flute design which removes debris and increases speed.
3.99
Price: 3.99
|
|
|
| DeWalt DW8420 4 inch DCW Metal/Thin Cutting Wheel | DeWalt D51822R Factory Reconditioned D51822 Heavy-Duty 31� Clipped Head Framing Nailer |
 The DeWalt DW8420 is a 4 inch DCW Metal/Thin Cutting Wheel. The wheel has 2 full sheets of fiberglass for durability and safety. Its premium resin bonds are 100% inspected before use for product consistency and quality.The DeWalt DW8420 is a 4 inch DCW Metal/Thin Cutting Wheel. The wheel has 2 full sheets of fiberglass for durability and safety. Its premium resin bonds are 100% inspected before use for product consistency and quality.
1.49
Price: 1.49
|
 The DeWalt D51822 is a Factory Reconditioned Heavy-Duty 31 Clipped Head Framing Nailer. It has 7.5 lbs magnesium housing and aluminum magazine which result in one of the lightest nailers in the industry. Its 12-3/4 Inch height allows for toe-nailing in confined areas. The unique engine design generates power to bury nails in both standard framing lumber and engineered lumber with minimal recoil. Dry fire lockout extends bumper life by preventing tool from actuating when magazine is empty. The impact resistant exhaust deflector protects tool from damage to the cap. The DeWalt D51822 is a Factory Reconditioned Heavy-Duty 31 Clipped Head Framing Nailer. It has 7.5 lbs magnesium housing and aluminum magazine which result in one of the lightest nailers in the industry. Its 12-3/4 Inch height allows for toe-nailing in confined areas. The unique engine design generates power to bury nails in both standard framing lumber and engineered lumber with minimal recoil. Dry fire lockout extends bumper life by preventing tool from actuating when magazine is empty. The impact resistant exhaust deflector protects tool from damage to the cap.
119.77
Price: 119.77
|
|
|
| Grip 29018 3-Inch 60-Grit Flap Sanding Wheel | Grip 29020 3-Inch 80-Grit Flap Sanding Wheel |
 The Grip 29018 is a 60-Grit 3-Inch Flap Sanding Wheel. The sanding wheels can smooth rough edges. The sanding tools feature aluminum oxide construction provides long durable use. It has a maximum speed of 20,000 RPM.The Grip 29018 is a 60-Grit 3-Inch Flap Sanding Wheel. The sanding wheels can smooth rough edges. The sanding tools feature aluminum oxide construction provides long durable use. It has a maximum speed of 20,000 RPM.
2.99
Price: 2.99
|
 The Grip 29020 is an 80-Grit 3-Inch Flap Sanding Wheel. The sanding wheels can smooth rough edges. The sanding tools feature aluminum oxide construction provides long durable use. It has a maximum speed of 20,000 RPM.The Grip 29020 is an 80-Grit 3-Inch Flap Sanding Wheel. The sanding wheels can smooth rough edges. The sanding tools feature aluminum oxide construction provides long durable use. It has a maximum speed of 20,000 RPM.
2.99
Price: 2.99
|
|
|
| Grip 29022 3-Inch 120-Grit Flap Sanding Wheel | Grip 61124 4-Piece Head Pin Punch Set with Safety Cap |
 The Grip 29022 is 120-Grit 3 Flap Sanding Wheel. The sanding wheels can smooth rough edges. The sanding tools feature aluminum oxide construction provides long durable use. It has a maximum speed of 20,000 RPM.The Grip 29022 is 120-Grit 3 Flap Sanding Wheel. The sanding wheels can smooth rough edges. The sanding tools feature aluminum oxide construction provides long durable use. It has a maximum speed of 20,000 RPM.
2.99
Price: 2.99
|
 The Grip 61124 is 4-Piece Head Pin Punch Set with Safety Cap. Grip heavy-duty pin punches feature an extra-wide head that provides a larger striking surface, preventing mis-hits and mushrooming. Polymer safety cap reduces noise, vibration and spalling, while minimizing shock and hammer kickback. Drop forged, heat-treated chrome vanadium steel.The Grip 61124 is 4-Piece Head Pin Punch Set with Safety Cap. Grip heavy-duty pin punches feature an extra-wide head that provides a larger striking surface, preventing mis-hits and mushrooming. Polymer safety cap reduces noise, vibration and spalling, while minimizing shock and hammer kickback. Drop forged, heat-treated chrome vanadium steel.
9.99
Price: 9.99
|
|
|
| Acme A564 Digital Pencil Tire Gauge | Hobart Welders 770074 MIG Nozzle Gel |
 The Acme A564 is a Digital Pencil Tire Gauge. This durable and easy-to-use gauge displays pressure with a high degree of accuracy, ensuring longer tire life and improved gas mileage. A tire-pressure monitoring system (TPMS) is an electronic system to monitor the air inside a tire. TPMS delivers real time tire pressure information to the driver of the vehicle � either via a gauge or a simple low pressure warning light. These systems employ physical pressure sensors inside each tire and a means of sending that information from inside the tire to the vehicle instrument cluster.The Acme A564 is a Digital Pencil Tire Gauge. This durable and easy-to-use gauge displays pressure with a high degree of accuracy, ensuring longer tire life and improved gas mileage. A tire-pressure monitoring system (TPMS) is an electronic system to monitor the air inside a tire. TPMS delivers real time tire pressure information to the driver of the vehicle � either via a gauge or a simple low pressure warning light. These systems employ physical pressure sensors inside each tire and a means of sending that information from inside the tire to the vehicle instrument cluster.
24.99
Price: 24.99
|
 Hobart Welders 770075 is a Mig Accessory Nozzle Gel which prevents adhesion of weld spatter to MIG nozzle and weld surface.Hobart Welders 770075 is a Mig Accessory Nozzle Gel which prevents adhesion of weld spatter to MIG nozzle and weld surface.
9.99
Price: 9.99
|
|
|
| Hobart Welders Weld-It 770080 Single-Flint Striker | Chicago Pneumatic CP7763-6 3/4-Inch Heavy-Duty Impact Wrench with 6-Inch Extended Anvil |
 This single-flint torch lighter with high-tensile wire frame, nickel-plated hood and rotating cylindrical file delivers a good spark on demand. Flints are replaceable.This single-flint torch lighter with high-tensile wire frame, nickel-plated hood and rotating cylindrical file delivers a good spark on demand. Flints are replaceable.
2.99
Price: 2.99
|
 -The Chicago Pneumatic 7763-6 Heavy Duty High Power 3/4-Inch Drive Impact Wrench is capable of producing a free speed of 6,300 RPMs, and weighs less than 12-pounds. Other highlighted features include a twin hammer clutch for extreme durability, a six vane motor for increased speed and power, and an onboard handle exhaust for added safety and versatility. A 3-position power regulator and directional control is operated by a single lever making the wrench an ideal choice for high-volume truck spring, truck maintenance, and heavy equipment shop applications.-The Chicago Pneumatic 7763-6 Heavy Duty High Power 3/4-Inch Drive Impact Wrench is capable of producing a free speed of 6,300 RPMs, and weighs less than 12-pounds. Other highlighted features include a twin hammer clutch for extreme durability, a six vane motor for increased speed and power, and an onboard handle exhaust for added safety and versatility. A 3-position power regulator and directional control is operated by a single lever making the wrench an ideal choice for high-volume truck spring, truck maintenance, and heavy equipment shop applications.
409.99
Price: 409.99
|
|
|
| AO Safety 91270 Vented Ratchet White Hard Hat | DeWalt D28474WR Factory Reconditioned D28474W 7-Inch Large Angle Grinder, 8000 RPM, 15.0 Amps |
 The AO Safety 91270 Vented Ratchet White Hard Hat has a high density polyethylene shell and UV protective finish. It has a four part ratchet suspension and meets ANSI Z89.1, Type 1, Class C and G safety standardThe AO Safety 91270 Vented Ratchet White Hard Hat has a high density polyethylene shell and UV protective finish. It has a four part ratchet suspension and meets ANSI Z89.1, Type 1, Class C and G safety standard
15.99
Price: 15.99
|
 The DeWalt D28474W factory reconditioned large angle grinder has the right combination of power, torque and speed. Powered by a new breed of 4 HP motors, the 15 Amp AC/DC DeWalt grinder runs cool and efficiently to provide maximum power, even under heavy loading. Combined with high power, the helical cut-steel gears provide high torque for faster in-use operating speeds. The tool is protected from abrasion through the use of labyrinth protected and sealed bearings and electrostatic coated motor windings. The keyless adjustable guard allows users to make guard adjustments without looking for tools. The DeWalt D28474W factory reconditioned large angle grinder has the right combination of power, torque and speed. Powered by a new breed of 4 HP motors, the 15 Amp AC/DC DeWalt grinder runs cool and efficiently to provide maximum power, even under heavy loading. Combined with high power, the helical cut-steel gears provide high torque for faster in-use operating speeds. The tool is protected from abrasion through the use of labyrinth protected and sealed bearings and electrostatic coated motor windings. The keyless adjustable guard allows users to make guard adjustments without looking for tools.
118.12
Price: 118.12
|
|
|
| Big Horn 11430 4-Inch Universal Dust Port | Mechanics M763 Impact Driver Adaptor |
 Big Horn 11430 is a 4-Inch Universal dust Port.Big Horn 11430 is a 4-Inch Universal dust Port.
4.99
Price: 4.99
|
 Adaptor for 1/2 (F) to 3/8 (M) impact driver Adaptor for 1/2 (F) to 3/8 (M) impact driver
4.99
Price: 4.99
|
|
|
| Mechanics M764 Impact Driver Adaptor | Jet 70440 40 inch Parallel Clamp |
 Adaptor for 1/2 (F) to 3/4 (M) impact driver Adaptor for 1/2 (F) to 3/4 (M) impact driver
14.99
Price: 14.99
|
 -Exclusive Design (patent pending) - Provides precision and power with exact 90 degree clamping at up to 1,000 lbs. pressure-Precision-Rule� Measurement System (patent pending) - Provides a consistent setup and quick identification of opening capacity-Slide-Glide Trigger (patent pending) - Makes precise adjustments rapidly-Ergonomic SUMOGRIP� Handle - Integrated with soft grip for added comfort and increased power-Moveable Rail Stand/End Stop - Helps preset clamping capacity rapidly and accurately-Non-marring Composite Resin Jaw Faces - Glue Resistant in design, ensure even clamping pressure- Reversible Clamping - Movable jaw can easily reverse to be used as a spreader-Extended Side Profile - Allows narrow clamping on the side of the jaw face-Acme Thread - Turns easy without binding-Exclusive Design (patent pending) - Provides precision and power with exact 90 degree clamping at up to 1,000 lbs. pressure-Precision-Rule� Measurement System (patent pending) - Provides a consistent setup and quick identification of opening capacity-Slide-Glide Trigger (patent pending) - Makes precise adjustments rapidly-Ergonomic SUMOGRIP� Handle - Integrated with soft grip for added comfort and increased power-Moveable Rail Stand/End Stop - Helps preset clamping capacity rapidly and accurately-Non-marring Composite Resin Jaw Faces - Glue Resistant in design, ensure even clamping pressure- Reversible Clamping - Movable jaw can easily reverse to be used as a spreader-Extended Side Profile - Allows narrow clamping on the side of the jaw face-Acme Thread - Turns easy without binding
45.99
Price: 45.99
|
|
|
| Jet 900904 Shop Class Series Shaper Video - VHS *********** | Jet 709287 1-Inch x 6 TPI Hook Tooth Band Saw Blade, 0.025-Inch Gauge |
 The Jet 900904 is a Shop Class Series Shaper VHS Video. The shopclass series guide is to set-up and operation. It helps user to learn how to choose the right tool for the job. It also helps the user to learn about properly setting up the tools and working with them safely, maintaining them and getting the most out of them. The user can learn about how to make linear moldings that are used in furniture and in architectural trim work and how to make raised panels that are part of frame-and-panel construction from this video. The Jet 900904 is a Shop Class Series Shaper VHS Video. The shopclass series guide is to set-up and operation. It helps user to learn how to choose the right tool for the job. It also helps the user to learn about properly setting up the tools and working with them safely, maintaining them and getting the most out of them. The user can learn about how to make linear moldings that are used in furniture and in architectural trim work and how to make raised panels that are part of frame-and-panel construction from this video.
4.99
Price: 4.99
|
 The Jet 709287 1-Inch x 6 TPI Hook Tooth Band Saw Blade is used for band saws with speed reduction to cut nonferrous metals and aluminum, It is built with a specially formulated alloy for superior performance, controllability, shock resistance and durability.The Jet 709287 1-Inch x 6 TPI Hook Tooth Band Saw Blade is used for band saws with speed reduction to cut nonferrous metals and aluminum, It is built with a specially formulated alloy for superior performance, controllability, shock resistance and durability.
37.99
Price: 37.99
|
|
|
| Jet 1791292 Mobile Base for Model DDS-225 Dual Drum Sander | Chicago Pneumatic CP749K 1/2Inch Super-Duty Air Impact Wrench Kit, 5.5 CFM |
 -This is a Jet 1791292 Mobile Base for Model DDS-225 Dual Drum Sander.-This is a Jet 1791292 Mobile Base for Model DDS-225 Dual Drum Sander.
199.99
Price: 199.99
|
 -Patented Spring Hammer clutch provides smooth operation and extreme durability-One hand push button forward/reverse power regulator-4 positive power settings in forward and ultimate power in reverse-Compact design with comfortable contoured handle-Patented Spring Hammer clutch provides smooth operation and extreme durability-One hand push button forward/reverse power regulator-4 positive power settings in forward and ultimate power in reverse-Compact design with comfortable contoured handle
199.99
Price: 199.99
|
|
|
| Chicago Pneumatic S1813BCD 1Inch Drive Budd Wheel | Makita 714081-A 2 inch Carbide Tipped Hole Saw Bit |
 -The 1" Budd Drive Wheel is Specifically designed for automotive applications. -The 1" Budd Drive Wheel is Specifically designed for automotive applications.
19.99
Price: 19.99
|
 Lasts 15x longer and drills 2.6x faster than Bi-M hole sawsSpecially designed carbide tips for cutting clean holesCuts a 2 inch diameter hole; max. depth of 1/8 inch with a 2-1/2 inch overall lengthLasts 15x longer and drills 2.6x faster than Bi-M hole sawsSpecially designed carbide tips for cutting clean holesCuts a 2 inch diameter hole; max. depth of 1/8 inch with a 2-1/2 inch overall length
69.99
Price: 69.99
|
|
|
| Makita BJR182Z 18V LXT Lithium-Ion Cordless Reciprocating Saw - Tool Only | Makita A-34590 1/2 inch x 21 inch 10 PK Abrasive Sanding Belts 100 Grit |
 Makita built, D35 high torque motor delivers 50% faster cutting with a 1-1/8" stroke that cuts 2,900 SPMCompact design at only 17-3/4" length and weighs only 8.1 lbs. (with battery, not included) for less operator fatigueErgonomic shape fits like a glove with even pressure and easy controlOne-handed, fast tool-less blade changes and shoe adjustmentsMakita built, D35 high torque motor delivers 50% faster cutting with a 1-1/8" stroke that cuts 2,900 SPMCompact design at only 17-3/4" length and weighs only 8.1 lbs. (with battery, not included) for less operator fatigueErgonomic shape fits like a glove with even pressure and easy controlOne-handed, fast tool-less blade changes and shoe adjustments
99.99
Price: 99.99
|
 The Makita A-34590 is a pack of 10, 1/2 inch x 21 inch 10 PK Abrasive Sanding Belts 100 Grit. It is used for wood, plastics, resins and metals. They fit Makita model 9032 3/8 inch Belt Sander.The Makita A-34590 is a pack of 10, 1/2 inch x 21 inch 10 PK Abrasive Sanding Belts 100 Grit. It is used for wood, plastics, resins and metals. They fit Makita model 9032 3/8 inch Belt Sander.
10.99
Price: 10.99
|
|
|
| Hyde 02980 Black & Silver 2-1/2Inch Hammer Head 6-in-1 Tool | Hyde 06870 6Inch Flexible MaxxGrip Hammer Head Joint Knife |
 The Hyde 02980 is a Black & Silver 2-1/2 Hammer Head 6-in-1 Tool. It features a sharp blade which is used as a scraper, putty remover and spreader with 1/2-round cutout to remove paint from rollers and sharp point to open cracks for patching. Full tang, high-carbon steel blade, individually ground, polished, mirror-finished and clear-coated, runs from working edge to end of nylon Projection-Interlock handle. It uses Flo-Lock fasteners with fishhook thread for a stronger blade-to-handle hold than conventional rivets. The Hyde 02980 is a Black & Silver 2-1/2 Hammer Head 6-in-1 Tool. It features a sharp blade which is used as a scraper, putty remover and spreader with 1/2-round cutout to remove paint from rollers and sharp point to open cracks for patching. Full tang, high-carbon steel blade, individually ground, polished, mirror-finished and clear-coated, runs from working edge to end of nylon Projection-Interlock handle. It uses Flo-Lock fasteners with fishhook thread for a stronger blade-to-handle hold than conventional rivets.
6.08
Price: 6.08
|
 -High carbon steel blades-Full tang blade construction-Blades run straight from the working edge through handle to nail setting end-Blades individually ground, polished, mirror finished and clear coated-The ergo-engineered soft-grip handles fit user fit for less user fatigue-cushion to absorb shock and perform comfortably during extended use-High carbon steel blades-Full tang blade construction-Blades run straight from the working edge through handle to nail setting end-Blades individually ground, polished, mirror finished and clear coated-The ergo-engineered soft-grip handles fit user fit for less user fatigue-cushion to absorb shock and perform comfortably during extended use
9.99
Price: 9.99
|
|
|
| Alltrade 648595 Carburetor Adjusting Tool | Festool 494369 Kapex KS 120 EB Miter Saw Crown Stop with Base |
 The Alltrade 648595 is a Carburetor Adjusting Tool. It is used for adjusting carburetors where idle and mixture adjusting screws are difficult to reach with a regular screwdriver. It includes a screwdriver end, 5 mm socket end, hex bit tool end and Double D bit tool end for use on 1979 and later GM carburetors.The Alltrade 648595 is a Carburetor Adjusting Tool. It is used for adjusting carburetors where idle and mixture adjusting screws are difficult to reach with a regular screwdriver. It includes a screwdriver end, 5 mm socket end, hex bit tool end and Double D bit tool end for use on 1979 and later GM carburetors.
6.02
Price: 6.02
|
 ToolKing.com is authorized to sell Festool products only to customers residing the United States and its territoriesToolKing.com promotional discount codes or coupons are NOT valid on Festool productsThe Festool 494369 is a Crown Stop with Base for the Kapex KS 120 EB Miter Saw. This crown stop supports nested workpieces at any angle. The base extensions provide enhanced material support to the left or right, and enable additional clamping possibilities when used with Festool FS clamps. (Includes 1 base extension and 1 crown stop, 2 are needed for use with FS Clamps).ToolKing.com is authorized to sell Festool products only to customers residing the United States and its territoriesToolKing.com promotional discount codes or coupons are NOT valid on Festool productsThe Festool 494369 is a Crown Stop with Base for the Kapex KS 120 EB Miter Saw. This crown stop supports nested workpieces at any angle. The base extensions provide enhanced material support to the left or right, and enable additional clamping possibilities when used with Festool FS clamps. (Includes 1 base extension and 1 crown stop, 2 are needed for use with FS Clamps).
85.00
Price: 85.00
|
|
|
| Festool 495565 MFT/3-Kapex Miter Saw Stand | Festool 494693 SZ-KS120 Kapex Clamping Kit - 2 Pack |
 ToolKing.com is authorized to sell Festool products only to customers residing the United States and its territoriesToolKing.com promotional discount codes or coupons are NOT valid on Festool productsThe Festool 495565 is a MFT/3-Kapex Saw Stand for the Kapex KS 120 EB Miter Saw. The Festool MFT/3-Kapex Stand is specially designed for use with the Kapex Sliding Compound Miter Saw. It has holes in the perforated top for the feet of the Kapex and for mounting clamps of the Kapex Mounting Kit.ToolKing.com is authorized to sell Festool products only to customers residing the United States and its territoriesToolKing.com promotional discount codes or coupons are NOT valid on Festool productsThe Festool 495565 is a MFT/3-Kapex Saw Stand for the Kapex KS 120 EB Miter Saw. The Festool MFT/3-Kapex Stand is specially designed for use with the Kapex Sliding Compound Miter Saw. It has holes in the perforated top for the feet of the Kapex and for mounting clamps of the Kapex Mounting Kit.
390.00
Price: 390.00
|
 ToolKing.com is authorized to sell Festool products only to customers residing the United States and its territoriesToolKing.com promotional discount codes or coupons are NOT valid on Festool productsThe Festool 494693 is a SZ-KS120 Kapex Clamping Kit, containing two clamps used for securing the Kapex saw to a multifunction table.ToolKing.com is authorized to sell Festool products only to customers residing the United States and its territoriesToolKing.com promotional discount codes or coupons are NOT valid on Festool productsThe Festool 494693 is a SZ-KS120 Kapex Clamping Kit, containing two clamps used for securing the Kapex saw to a multifunction table.
17.50
Price: 17.50
|
|
|
| 10C Technologies 10CAD09 12V-18V Hilti Adapter | 10C Technologies 10CLI03 Lithium-Ion 10.8V Bosch Adapter |
Easy to UseColor Coded Release TabJob Site Tough DesignFor use with 10C Charging Units OnlyFor Use with 12V-18V BatteriesEasy to UseColor Coded Release TabJob Site Tough DesignFor use with 10C Charging Units OnlyFor Use with 12V-18V Batteries
14.99
Price: 14.99
|
Lithium-Ion TechnologyEasy to UseColor Coded Release TabJob Site Tough DesignFor use with 10C Charging Units OnlyFor Use with 10.8V Batteries OnlyLithium-Ion TechnologyEasy to UseColor Coded Release TabJob Site Tough DesignFor use with 10C Charging Units OnlyFor Use with 10.8V Batteries Only
24.99
Price: 24.99
|
|
|
| AO Safety 94026 Advanced Harness | AO Safety 94027 Upgraded 6-Foot Tybak Shock Lanyard |
 The AO Safety 94026 is an Advanced Harness. The Advanced Harness has a special non-elastic helical yarn webbing that stretches and moves with wearers for non-binding mobility. Unlike competitive harnesses that utilize elastic blend webbing, this harness maintains its shape and structural integrity wear after wear and during a fall. It is the best of worlds, comfort and quality. It meets CSA Z259.10-06, ANSI Z359.1, OSHA 1910/1926 safety standards.The AO Safety 94026 is an Advanced Harness. The Advanced Harness has a special non-elastic helical yarn webbing that stretches and moves with wearers for non-binding mobility. Unlike competitive harnesses that utilize elastic blend webbing, this harness maintains its shape and structural integrity wear after wear and during a fall. It is the best of worlds, comfort and quality. It meets CSA Z259.10-06, ANSI Z359.1, OSHA 1910/1926 safety standards.
79.99
Price: 79.99
|
 The AO Safety 94027 is a 6-Foot Tybak Shock Lanyard. The unique design improves tie off option by allowing lanyard to sagely tie back on webbing to an appropriate anchor point. It has 3 double locking snap hooks. It meets CSA Z259.11, ANSI Z359.1, OSHA 1910/1926 safety standards.The AO Safety 94027 is a 6-Foot Tybak Shock Lanyard. The unique design improves tie off option by allowing lanyard to sagely tie back on webbing to an appropriate anchor point. It has 3 double locking snap hooks. It meets CSA Z259.11, ANSI Z359.1, OSHA 1910/1926 safety standards.
59.99
Price: 59.99
|
|
|
| Akeda 3814 14 Degree Dovetail Cutter Router Bit | Bosch HC4040 WildBore 7/8 inch x 11 inch x 16 inch Spline Shank Rotary Hammer Drill Bit |
 Akeda 3814 is a 14 Degree Dovetail Cutter Router Bit. This Akeda 14 x 3/8-Inch deep dovetail bit with 8mm shank is used with the 14 pin guides to form through dovetails from 3/8-Inch down to 1/4-Inch thick. It is also used to form fixed depth (3/8-Inch) half blind dovetails using the guide fingers included with the jig. This bit has an 8mm shank, so you may need a 1/20-Inch to 8mm collet reducer for your router.Akeda 3814 is a 14 Degree Dovetail Cutter Router Bit. This Akeda 14 x 3/8-Inch deep dovetail bit with 8mm shank is used with the 14 pin guides to form through dovetails from 3/8-Inch down to 1/4-Inch thick. It is also used to form fixed depth (3/8-Inch) half blind dovetails using the guide fingers included with the jig. This bit has an 8mm shank, so you may need a 1/20-Inch to 8mm collet reducer for your router.
18.99
Price: 18.99
|
 The Bosch HC4040 is a WildBore 7/8 inch x 11 inch x 16 inch Spline Shank Rotary Hammer Drill Bit. The spline rotary hammer bit is carbide tipped and fit Bosch as well as other spline hammers.The Bosch HC4040 is a WildBore 7/8 inch x 11 inch x 16 inch Spline Shank Rotary Hammer Drill Bit. The spline rotary hammer bit is carbide tipped and fit Bosch as well as other spline hammers.
36.99
Price: 36.99
|
|
|
| DeWalt DW8930 Blade for the DW893 Shear | DeWalt DW3128B 12-Inch 80-Tooth Thin-Kerf Fine Crosscutting Carbide Circular Saw Blade |
 The DeWalt DW8930 shear blade is made from hardened steel for long life. It is machined to strict tolerances at the factory for superior performance. The DeWalt DW8930 shear blade is made from hardened steel for long life. It is machined to strict tolerances at the factory for superior performance.
39.99
Price: 39.99
|
 Thin kerf for fast and smooth cutting action with minimal material wasteComputer balanced plate reduces vibration for improved accuracy and better finishExclusive wedge shoulder design puts more steel behind each tip for increased durability and accuracyIdeal for all cutting applications in softwood, hardwood, chip board, or plywood using a table or miter sawTougher tungsten carbide stays sharper longer Thin kerf for fast and smooth cutting action with minimal material wasteComputer balanced plate reduces vibration for improved accuracy and better finishExclusive wedge shoulder design puts more steel behind each tip for increased durability and accuracyIdeal for all cutting applications in softwood, hardwood, chip board, or plywood using a table or miter sawTougher tungsten carbide stays sharper longer
34.99
Price: 34.99
|
|
|
| DeWalt DW9116 7.2V 18V 1 Hour Charger with Automatic Tune-Up Mode - Accessory Only | DeWalt DW3774-5 3-Inch 18 TPI T-Shank Cobalt Steel Jig Saw Blade - 5 Pack |
 The DeWalt DW9116 is a 7.2V - 18V One Hour Charger with Automatic Tune-Up Mode. It is used to optimize the performance and life of DeWalt batteries. It is required to leave the battery in the charger for 4 to 10 hours to revitalize the battery, approximately every tenth charge. Every charge gives longer run time and up to 20% more cycle life. It has diagnostics with 5 LED indicators which are used to communicate battery charge status like charged, charging, power line problem, replace pack and battery too hot or too cold.The DeWalt DW9116 is a 7.2V - 18V One Hour Charger with Automatic Tune-Up Mode. It is used to optimize the performance and life of DeWalt batteries. It is required to leave the battery in the charger for 4 to 10 hours to revitalize the battery, approximately every tenth charge. Every charge gives longer run time and up to 20% more cycle life. It has diagnostics with 5 LED indicators which are used to communicate battery charge status like charged, charging, power line problem, replace pack and battery too hot or too cold.
29.99
Price: 29.99
|
 The DeWalt DW3774-5 is a pack of 5 3-Inch, 18 TPI T-Shank Cobalt Steel Jig Saw Blades. These blades have unique curved teeth design which minimizes stress points for longer blade life and faster cuts. It features T-shank design fits all Bosch and DeWalt jig saws. The DeWalt DW3774-5 is a pack of 5 3-Inch, 18 TPI T-Shank Cobalt Steel Jig Saw Blades. These blades have unique curved teeth design which minimizes stress points for longer blade life and faster cuts. It features T-shank design fits all Bosch and DeWalt jig saws.
8.99
Price: 8.99
|
|
|
| DeWalt DW4906 8Inch Crimped Bench Grinder Wire Wheel Brush | Grip 27031 2-Piece Detail Cleaning Brush Set |
 The DeWalt DW4906 is a 8" Crimped Bench Grinder Wire Wheel Brush. The wire wheel brush is manufactured using highly specified wire grades and is constructed for perfect balance. Every wheel is properly inspected to ensure that each of them meets the prescribed quality standard and one of the highest wire content counts in the industry. The bench grinder wheel brush is available in crimped wire for lighter duty applications such as deburring, weld cleaning, rust removal and surface preparation. The DeWalt DW4906 is a 8" Crimped Bench Grinder Wire Wheel Brush. The wire wheel brush is manufactured using highly specified wire grades and is constructed for perfect balance. Every wheel is properly inspected to ensure that each of them meets the prescribed quality standard and one of the highest wire content counts in the industry. The bench grinder wheel brush is available in crimped wire for lighter duty applications such as deburring, weld cleaning, rust removal and surface preparation.
19.99
Price: 19.99
|
The Grip 27031 is a 2-Piece Detail Cleaning Brush Set. It is ideal for cleaning dirt and grime out of small parts within the engine compartment prolonging engine life. The angled head allows greater access into hard to reach areas.The Grip 27031 is a 2-Piece Detail Cleaning Brush Set. It is ideal for cleaning dirt and grime out of small parts within the engine compartment prolonging engine life. The angled head allows greater access into hard to reach areas.
3.99
Price: 3.99
|
|
|
| Grip 28380 Heavy Duty Elastic Hold-Down Strap (Pack of 6) | Grip 35357 21-Piece Cobalt Drill Bit Set |
 Use these straps for quick, convenient load binding Heavy duty elastic provides constnt tension and a firm hold Perfect for tarps, cars, trucks, trailers, bikes, and motorcycles Non-marring, high strength hooks eliminate knots Pack of 6- 2 each 12, 18 and 24 Use these straps for quick, convenient load binding Heavy duty elastic provides constnt tension and a firm hold Perfect for tarps, cars, trucks, trailers, bikes, and motorcycles Non-marring, high strength hooks eliminate knots Pack of 6- 2 each 12, 18 and 24
1.99
Price: 1.99
|
 Professional quality Use for drilling in tough, high tensile strength materials Lasts up to 12 times longer than standard bits! Includes Drill bits 1/16 to 3/8 by 1/64 in handy storage box Professional quality Use for drilling in tough, high tensile strength materials Lasts up to 12 times longer than standard bits! Includes Drill bits 1/16 to 3/8 by 1/64 in handy storage box
19.99
Price: 19.99
|
|
|
| Grip 41010 1-1/2 lb. Steel Forged Brick Hammer | Grip 43092 10 Piecec 12 Inch x 1/8 Inch Heat Shrink Tubes |
 Polished head with rubber cushion grip A must have for every brick worker Solid forged steel C45 1-1/2 lbs., 10 long handle Polished head with rubber cushion grip A must have for every brick worker Solid forged steel C45 1-1/2 lbs., 10 long handle
13.99
Price: 13.99
|
 The Grip 43092 is a set of 10 12-Inch x 1/8-Inch Heat Shrink Tubes.The Grip 43092 is a set of 10 12-Inch x 1/8-Inch Heat Shrink Tubes.
2.99
Price: 2.99
|
|
|
| Grip 43096 10 Piece 12 Inch x 1/4 Inch Heat Shrink Tubes | Grip 43142 151-Pc Eye Bolt Assortment |
 The Grip 43096 is a set of 10 12-Inch x 1/4-Inch Heat Shrink Tubes.The Grip 43096 is a set of 10 12-Inch x 1/4-Inch Heat Shrink Tubes.
2.89
Price: 2.89
|
 -Drop forged, galvanized steel construction -Sectioned plastic storage case -Consists of screw eyes and screw hooks, bolts not included. -Drop forged, galvanized steel construction -Sectioned plastic storage case -Consists of screw eyes and screw hooks, bolts not included.
6.99
Price: 6.99
|
|
|
| Grip 46062 8 Way Multi-Purpose Knife | Grip 46071 100 Piece Hook Blade Dispenser |
 The Grip 46062 is 8 Way Multi-Purpose Knife. The use for clean and precise cuts in paper, plastic, leather, rubber, carpet, vinyl, and more. Four versatile cutting blades constructed from heavy gauge manganese alloy steel. Multi-angle design is ideal for use in confined working areas.The Grip 46062 is 8 Way Multi-Purpose Knife. The use for clean and precise cuts in paper, plastic, leather, rubber, carpet, vinyl, and more. Four versatile cutting blades constructed from heavy gauge manganese alloy steel. Multi-angle design is ideal for use in confined working areas.
13.99
Price: 13.99
|
The Grip 46071 is a 100 Piece Hook Blade Dispenser. The heat treated steel blades that fit all types of utility knifes. Hook blade is ideal for cutting flooring such as linoleum and carpet. This dispenser provides safe storage while keeping blades readily available for use.The Grip 46071 is a 100 Piece Hook Blade Dispenser. The heat treated steel blades that fit all types of utility knifes. Hook blade is ideal for cutting flooring such as linoleum and carpet. This dispenser provides safe storage while keeping blades readily available for use.
17.99
Price: 17.99
|
|
|
| Grip 50098 Adjustable Pin Wrench | Milwaukee 48-00-4712 Ice Hardened� 6-Inch 10 TPI Torch� SAWZALL Blade |
Grip 50098 is an Adjustable Pin Wrench.Grip 50098 is an Adjustable Pin Wrench.
4.99
Price: 4.99
|
 The Milwaukee 48-00-4712 is an Ice Hardened� 6-Inch 10 TPI Torch� SAWZALL blade. Ice Edge� blades are processed with a patent pending cryogenic heat treatment so they can handle the toughest alloy steel materials. Unlike surface coatings that wear away, cryogenics harden to the core by minimizing soft metal (austenite) and creating more hard metal (martensite). The result is a product that is more consistently hard throughout. These blades are made from Matrix II bi-metal material with 8% cobalt. The bi-metal design allows for faster cutting, longer life blades that can bend without shattering.The Milwaukee 48-00-4712 is an Ice Hardened� 6-Inch 10 TPI Torch� SAWZALL blade. Ice Edge� blades are processed with a patent pending cryogenic heat treatment so they can handle the toughest alloy steel materials. Unlike surface coatings that wear away, cryogenics harden to the core by minimizing soft metal (austenite) and creating more hard metal (martensite). The result is a product that is more consistently hard throughout. These blades are made from Matrix II bi-metal material with 8% cobalt. The bi-metal design allows for faster cutting, longer life blades that can bend without shattering.
16.99
Price: 16.99
|
|
|
| Milwaukee 48-25-2121 2-1/8Inch Selfeed Drill Bit | Acme� A5106 7/8Inch Stainless Steel Worm-Drive Hose Clamp (5-Pack) |
 Milwaukee 48-25-2121 is a 2-1/8 Selfeed Drill Bit. The inside cutting plane shaves the hole radius for clean smooth holes without pressure. A removable, replaceable feed screw draws the bit into the gummiest of woods effortlessly. Hex shank provides a secure gripping surface for the drill chuck. The bit is coated with a rust inhibitor. It is used by electricians and plumbers for large hole drilling in wood. Use feed screw 48-28-6870, socket wrench 49-96-0060 and set screw 06-83-2625 on diameters less than 3.Milwaukee 48-25-2121 is a 2-1/8 Selfeed Drill Bit. The inside cutting plane shaves the hole radius for clean smooth holes without pressure. A removable, replaceable feed screw draws the bit into the gummiest of woods effortlessly. Hex shank provides a secure gripping surface for the drill chuck. The bit is coated with a rust inhibitor. It is used by electricians and plumbers for large hole drilling in wood. Use feed screw 48-28-6870, socket wrench 49-96-0060 and set screw 06-83-2625 on diameters less than 3.
25.99
Price: 25.99
|
 5/16 - 7/8 diameter size range 5/16 band widthIncludes 55/16 - 7/8 diameter size range 5/16 band widthIncludes 5
10.00
Price: 10.00
|
|
|
| Delta 28-678 156-1/2 inch x 1/2 inch 3 TPI Band Saw Blade (20 inch Band Saw) | Delta 28-771 136 inch x 3/4 inch 3 TPI Band Saw Blade (18 inch Band Saw) |
 The Delta 28-678 is a band saw blade. It is a high carbon steel blade with precision machined and set teeth for accuracy. The band saw blade is tension-tested for its strength. The Delta 28-678 is a band saw blade. It is a high carbon steel blade with precision machined and set teeth for accuracy. The band saw blade is tension-tested for its strength.
20.99
Price: 20.99
|
 The Delta 28-771 band saw blade is high carbon steel blade with precision machined and set teeth for accuracy. The band saw blade is tension-tested for strength. The Delta 28-771 band saw blade is high carbon steel blade with precision machined and set teeth for accuracy. The band saw blade is tension-tested for strength.
27.99
Price: 27.99
|
|
|
| Delta 34-264 8 inch Dado Insert for Delta Right-Tilt Unisaws | Delta 50-482 Dust Collection 4 inch to 2-1/4 inch Plastic Adapter |
 Fits Delta Right-Tilt Unisaws Used in place of standard insert Fits Delta Right-Tilt Unisaws Used in place of standard insert
41.99
Price: 41.99
|
 Delta 50-482 4 inch - 2-1/4 inch Plastic Adapter is a dust collector accessory Fits inside of accessory No.50-330 4 inch diameter hose to accommodate a 2-1/4 inch connector Delta 50-482 4 inch - 2-1/4 inch Plastic Adapter is a dust collector accessory Fits inside of accessory No.50-330 4 inch diameter hose to accommodate a 2-1/4 inch connector
2.99
Price: 2.99
|
|
|
| Irwin 274001 11 inch Quick Adjusting Pipe Wrench | Amana 45190 Plunge Router Bit - 1/4Inch Shank, 1/16Inch Cutting |
 The Irwin 274001 is a 11 inch Quick Adjusting Pipe Wrench. The quick adjusting pipe wrench is built for convenience and durability. One-handed operation enhances speed and is also convenient. It ratchets quickly to the work surface. The pipe wrench has a smooth release upon completion of job. Its broached teeth are ideal for most surfaces including black, galvanized, PVC and copper pipe as well as nuts, bolts and couplings.The Irwin 274001 is a 11 inch Quick Adjusting Pipe Wrench. The quick adjusting pipe wrench is built for convenience and durability. One-handed operation enhances speed and is also convenient. It ratchets quickly to the work surface. The pipe wrench has a smooth release upon completion of job. Its broached teeth are ideal for most surfaces including black, galvanized, PVC and copper pipe as well as nuts, bolts and couplings.
30.99
Price: 30.99
|
 Solid carbide cutting edge 1/4 shank. Two flute. Cut diameter 1/16, flute length 3/16 Overall length 1-5/8 Solid carbide cutting edge 1/4 shank. Two flute. Cut diameter 1/16, flute length 3/16 Overall length 1-5/8
18.99
Price: 18.99
|
|
|
| Amana 45211 Plunge Router Bit - 1/4Inch Shank, 1/4Inch Cutting | Amana 45412 Plunge Router Bit - 1/2Inch Shank, 5/16Inch Cutting |
 1/4 shank. Two flute. Cut diameter 1/4, flute length 1 Overall length 2-7/8 1/4 shank. Two flute. Cut diameter 1/4, flute length 1 Overall length 2-7/8
15.99
Price: 15.99
|
 1/2 shank. Two flute. Cut diameter 5/16, flute length 1 Overall length 2-3/4 1/2 shank. Two flute. Cut diameter 5/16, flute length 1 Overall length 2-3/4
15.99
Price: 15.99
|
|
|
| Amana 45506 Panel Pilot Router Bit - 1/4Inch Shank, 1/4Inch Diameter, Single Flute | Amana 45800 Dovetail Router Bit - 1/4Inch Shank, 9 Degree, 3/8Inch Cutting |
 Designed for the mobile home and R.V. industries, for fast cut out work 1/4 shank. Single flute. Cut diameter 1/4, flute length 3/4 Overall length 2-1/2 Designed for the mobile home and R.V. industries, for fast cut out work 1/4 shank. Single flute. Cut diameter 1/4, flute length 3/4 Overall length 2-1/2
10.99
Price: 10.99
|
 1/4 shank. Two flute. Cut diameter 3/8, flute length 3/8, 9 degree angle Overall length 2 Application Incra 1/4 shank. Two flute. Cut diameter 3/8, flute length 3/8, 9 degree angle Overall length 2 Application Incra
16.99
Price: 16.99
|
|
|
| Amana 47092 Flush Trim Router Bit - 1/4Inch Shank, 1/4Inch Diameter, Two Flute | Amana 47160 Flush Trim V-Groove Router Bit - 1/4Inch Shank, 5/8Inch Diameter, Two Flute |
 1/4 diameter for closer inside corner cutting 1/4 shank. Two flute. Cut diameter 1/4, flute length 1 Overall length 2-1/2 1/4 diameter for closer inside corner cutting 1/4 shank. Two flute. Cut diameter 1/4, flute length 1 Overall length 2-1/2
23.99
Price: 23.99
|
 Double application in a single pass flush trim and V-Groove on face frame 1/4 shank. Two flute. Cut diameter 5/8, flute length 1 Overall length 2-1/2 Double application in a single pass flush trim and V-Groove on face frame 1/4 shank. Two flute. Cut diameter 5/8, flute length 1 Overall length 2-1/2
27.99
Price: 27.99
|
|
|
| Amana 49116 Cove Router Bit - 1/4Inch Shank, 1-3/8Inch Diameter, 1/2Inch Radius | Amana 55388 Glue Joint Router Bit - 1/2Inch Shank, Two Flute |
 Use #47704 replacement bearing 1/4 shank. Two flute. Cut diameter 1-3/8, flute length 3/4, radius 1/2 Overall length 2-1/4 Use #47704 replacement bearing 1/4 shank. Two flute. Cut diameter 1-3/8, flute length 3/4, radius 1/2 Overall length 2-1/4
36.99
Price: 36.99
|
 Second piece is cut upside-down to the first for a perfect fit. There is no need to realign the router depth, provided that the wood is centered to the cutting edge of the bit. Can be used on 5/8 through 1 material 1/2 shank. Two flute. Large diameter 1-7/8, small diameter 1-7/16, flute length 1-3/32 Overall length 2-5/8 Second piece is cut upside-down to the first for a perfect fit. There is no need to realign the router depth, provided that the wood is centered to the cutting edge of the bit. Can be used on 5/8 through 1 material 1/2 shank. Two flute. Large diameter 1-7/8, small diameter 1-7/16, flute length 1-3/32 Overall length 2-5/8
81.99
Price: 81.99
|
|
|
| Lenox 30005 5L 3/8-Inch Hex-Shank Hole Saw Arbor for 9L to 19L Hole Saws | Hobart Welders 770464 7014 1/8Inch Welding Electrode |
 Hardened carbon steel for strength provides added durabilityUse for enlarging holesAdjustable pilot bitFits Lenox Hole Saws 9L-19L, 9/16 - 1-3/16Hardened carbon steel for strength provides added durabilityUse for enlarging holesAdjustable pilot bitFits Lenox Hole Saws 9L-19L, 9/16 - 1-3/16
6.99
Price: 6.99
|
 The Hobart Welders 770464 is a 7014 Welding Electrode. For high-deposition requirements, this stick electrode is ideal for applications requiring light penetration and faster travel speeds. It runs in all positions on AC or DCEN (straight) or DCEP (reverse) polarity. It has 70000 PSI tensile strength. The Hobart Welders 770464 is a 7014 Welding Electrode. For high-deposition requirements, this stick electrode is ideal for applications requiring light penetration and faster travel speeds. It runs in all positions on AC or DCEN (straight) or DCEP (reverse) polarity. It has 70000 PSI tensile strength.
13.99
Price: 13.99
|
|
|
| Hobart Welders Weld-It H117144-R45 6013 Low Penetration Welding Stick Electrodes - 1/8Inch, 5 lbs. | Hobart 770085 Oxy/Acct Large Tip Cleaner |
 A light to medium penetrating all-purpose stick electrode for use in all positions, on carbon steel. Runs on AC or DCEP (reverse) polarity or DCEN (straight) polarity. 60,000 PSI tensile strength. Good for general, all-purpose applications and joints with poor fit-up.A light to medium penetrating all-purpose stick electrode for use in all positions, on carbon steel. Runs on AC or DCEP (reverse) polarity or DCEN (straight) polarity. 60,000 PSI tensile strength. Good for general, all-purpose applications and joints with poor fit-up.
13.99
Price: 13.99
|
 -Stainless steel wire files for cleaning the gas orifices of cutting and brazing tips.-Stainless steel wire files for cleaning the gas orifices of cutting and brazing tips.
4.99
Price: 4.99
|
|
|
| Fein FSC 2.0-TK SuperCut With Tile Kit | Kreg P-WAL Walnut Pocket Hole Plugs - 50 ct. |
 -Replacement of single, damaged tiles without damaging adjoinging tiles -Simple and precise working system - into the corners and along radii -Little dirt and dust -Cut-outs and fitting work is accomplished quickly, easily, and neatly using the E-Cut saw blades -You dont have complicated touch-up work -Convert to a versatile triangular sander with high grinding capacity -Replacement of single, damaged tiles without damaging adjoinging tiles -Simple and precise working system - into the corners and along radii -Little dirt and dust -Cut-outs and fitting work is accomplished quickly, easily, and neatly using the E-Cut saw blades -You dont have complicated touch-up work -Convert to a versatile triangular sander with high grinding capacity
817.99
Price: 817.99
|
 Use pocket holes joints even in plain sight. Our solid wood plugs are made from accurate dowel for a great fit and cut to match the pocket's angle for minimal sanding. Sealed to resist moisture in 50 count packages. Use pocket holes joints even in plain sight. Our solid wood plugs are made from accurate dowel for a great fit and cut to match the pocket's angle for minimal sanding. Sealed to resist moisture in 50 count packages.
6.99
Price: 6.99
|
|
|
| Adjustable Clamp 8520K Pony Euro Claw (2 Pack) | Big Horn 11115 24-Inch Floor Sweep 4-Inch Port |
 The Adjustable Clamp 8520K is a pack of 2 Pony Euro Claws. These claws operate on the same principle as the cabinet claw. It functions with multiple steps for frame less (euro) cabinet installations. These clamps never need to be removed from the job until installation is complete. Claws align cabinets for mounting and fastening in one easy step. Cams and alignment plate have special non-marring material to protect work.The Adjustable Clamp 8520K is a pack of 2 Pony Euro Claws. These claws operate on the same principle as the cabinet claw. It functions with multiple steps for frame less (euro) cabinet installations. These clamps never need to be removed from the job until installation is complete. Claws align cabinets for mounting and fastening in one easy step. Cams and alignment plate have special non-marring material to protect work.
83.99
Price: 83.99
|
 Big Horn 11115 is a 24-Inch Floor Sweep with a 4-Inch Port.Big Horn 11115 is a 24-Inch Floor Sweep with a 4-Inch Port.
7.99
Price: 7.99
|
|
|
| Big Horn 11118 4Inch X 10Inch Dust Hood | Big Horn 19686 4-Pc 1-3/4Inch - 2-3/8Inch Miter Clamps |
 -Big Horn 11118 4 X 10 DUST HOOD-Big Horn 11118 4 X 10 DUST HOOD
6.99
Price: 6.99
|
 -The Big Horn 19686 is a pack of 4-Pc 1-3/4 - 2-3/8 Miter Clamps. These quick and easy to apply clamps are made from tempered spring steel. These sharp ended clamps hold by pulling the pointed ends apart to engage.-The Big Horn 19686 is a pack of 4-Pc 1-3/4 - 2-3/8 Miter Clamps. These quick and easy to apply clamps are made from tempered spring steel. These sharp ended clamps hold by pulling the pointed ends apart to engage.
9.99
Price: 9.99
|
|
|
| Mercer 392003 3Inch Disc Holder | Mechanics M550DB Air Hammer with 4 Chisels |
 -Female threaded hub-Semi-rigid rubber pad-Hub holds disc firmly in place-Pad bends with disc on contoured surfaces-Female threaded hub-Semi-rigid rubber pad-Hub holds disc firmly in place-Pad bends with disc on contoured surfaces
7.99
Price: 7.99
|
 -For general repair work, cutting and exhaust system work-For general repair work, cutting and exhaust system work
14.99
Price: 14.99
|
|
|
| Mechanics M558DB 1/2Inch Drive Impact Wrench | Mechanics M567DB Mini Die Grinder Kit |
 -Powerful 1/2 Drive impact wrench-Built in air regulator-Well balanced design-Free speed-7,000 rpm, Torque 230 ft/lb-Powerful 1/2 Drive impact wrench-Built in air regulator-Well balanced design-Free speed-7,000 rpm, Torque 230 ft/lb
39.99
Price: 39.99
|
 Includes mini die grinder and the following accessories (5) mounted stones - 1/4" shank (5) mounted stones - 1/8" shank (2) collets - 1/4" and 1/8" (2) collet wrenches and durable storage case Includes mini die grinder and the following accessories (5) mounted stones - 1/4" shank (5) mounted stones - 1/8" shank (2) collets - 1/4" and 1/8" (2) collet wrenches and durable storage case
24.99
Price: 24.99
|
|
|
| Mechanics M573DB 5Inch High Speed Sander | Mechanics M610 3/8Inch x 50' Air Hose on Reel |
 Powerful 5 high speed sander is great for stripping paint and rust removelSander with three backing pad sizes 3, 4.5 and 5.5Free speed 16,000 rpmPowerful 5 high speed sander is great for stripping paint and rust removelSander with three backing pad sizes 3, 4.5 and 5.5Free speed 16,000 rpm
25.99
Price: 25.99
|
 50 foot 300 psi 3/8” air hose All brass 1/4” npt 360 °swivel valve Includes 3’ lead supply hose with swivel valve Mounts to ceiling, wall or floor Easy crank handle with spring tension brake Steel frame with brake 50 foot 300 psi 3/8” air hose All brass 1/4” npt 360 °swivel valve Includes 3’ lead supply hose with swivel valve Mounts to ceiling, wall or floor Easy crank handle with spring tension brake Steel frame with brake
43.99
Price: 43.99
|
|
|
| Mechanics M668 Air Hammer with 5 Chisels | Mechanics M770 1/2Inch Drive 5Inch Impact Extension Bar |
 For general repair work, cutting and exhaust system workFor general repair work, cutting and exhaust system work
23.99
Price: 23.99
|
 12 drive, 5 long extension For use with air tools 12 drive, 5 long extension For use with air tools
5.99
Price: 5.99
|
|
|
| Mechanics M783 1Inch Bud Wheel Socket | Mechanics M7111 8lb Splitting Maul With Fiberglass Handle |
 Extra deep design (1-1/2 x 13/16) allows removal of both nut and stud with 1 socket Fits most domestic trucks with dual rear wheels Extra deep design (1-1/2 x 13/16) allows removal of both nut and stud with 1 socket Fits most domestic trucks with dual rear wheels
22.99
Price: 22.99
|
 Professional qualityDurable fiberglass handleExcellent for splitting wood8lbs.Professional qualityDurable fiberglass handleExcellent for splitting wood8lbs.
25.99
Price: 25.99
|
|
|
| |
|
|
